Resources

An electric immersion heater delivers a constant electrical power of P=450 WP = 450\text{ W} directly to a 0.750 kg0.750\text{ kg} sample of solid substance XX initially at its melting temperature of 48.0∘C48.0^\circ\text{C}. The sample requires 4.00 minutes4.00\text{ minutes} of heating to completely melt into liquid at 48.0∘C48.0^\circ\text{C}. During this phase change, the system expands, doing 1.45 kJ1.45\text{ kJ} of boundary work against the constant atmospheric surroundings (Wby=+1.45 kJW_\text{by} = +1.45\text{ kJ}). Using the first law of thermodynamics with standard sign conventions (ΔU=Q−Wby\Delta U = Q - W_\text{by}), determine the change in internal energy ΔU\Delta U of the sample during this melting process.

Answer and steps

Final answer

1.07×105 J1.07 \times 10^5\text{ J}

Steps

01

Calculate the total heat absorbed (QQ)

To find the change in internal energy ΔU\Delta U during the melting process, apply the First Law of Thermodynamics: ΔU=Q−Wby\Delta U = Q - W_\text{by} where:

  • QQ is the net heat absorbed by the substance,
  • WbyW_\text{by} is the work done by the substance on its surroundings.

The immersion heater supplies a constant electrical power P=450 WP = 450\text{ W} over a time interval Δt=4.00 minutes\Delta t = 4.00\text{ minutes}.

Convert the heating time to standard SI units (seconds): Δt=4.00 min×60 s/min=240 s\Delta t = 4.00\text{ min} \times 60\text{ s/min} = 240\text{ s}

Assuming all supplied electrical energy is transferred as thermal energy to the sample: Q=P⋅ΔtQ = P \cdot \Delta t Q=450 W×240 s=108,000 J=1.08×105 JQ = 450\text{ W} \times 240\text{ s} = 108{,}000\text{ J} = 1.08 \times 10^5\text{ J}

02

Convert work done to standard units

The substance expands against atmospheric pressure, doing work on the surroundings: Wby=+1.45 kJ=1,450 JW_\text{by} = +1.45\text{ kJ} = 1{,}450\text{ J}

(Pitfall to avoid: Ensure work and heat share the same units before subtracting. Mixing kilojoules and joules directly leads to severe order-of-magnitude errors.)

03

Compute the change in internal energy (ΔU\Delta U)

Substitute QQ and WbyW_\text{by} into the First Law equation: ΔU=Q−Wby\Delta U = Q - W_\text{by} ΔU=108,000 J−1,450 J=106,550 J\Delta U = 108{,}000\text{ J} - 1{,}450\text{ J} = 106{,}550\text{ J}

Rounding to three significant figures gives: ΔU=1.07×105 J\Delta U = 1.07 \times 10^5\text{ J}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the time from minutes to seconds when calculating total heat transferred, resulting in an underestimated Q and negative ΔU.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Q=P⋅t=450⋅4.00=1800 J=1.80 kJQ = P \cdot t = 450 \cdot 4.00 = 1800\text{ J} = 1.80\text{ kJ}

    Correct

    Q=P⋅Δt=450 W×(4.00×60 s)=108,000 J=108 kJQ = P \cdot \Delta t = 450\text{ W} \times (4.00 \times 60\text{ s}) = 108{,}000\text{ J} = 108\text{ kJ}

    You substituted the heating duration directly as 4.004.00 instead of converting to seconds. Because 1 W=1 J/s1\text{ W} = 1\text{ J/s}, time must be in seconds (4.00 min×60 s/min=240 s4.00\text{ min} \times 60\text{ s/min} = 240\text{ s}).

  2. Step 2

    ΔU=Q−Wby=1.80 kJ−1.45 kJ=0.35 kJ\Delta U = Q - W_\text{by} = 1.80\text{ kJ} - 1.45\text{ kJ} = 0.35\text{ kJ}

    Correct

    ΔU=Q−Wby=108 kJ−1.45 kJ=106.55 kJ≈1.07×105 J\Delta U = Q - W_\text{by} = 108\text{ kJ} - 1.45\text{ kJ} = 106.55\text{ kJ} \approx 1.07 \times 10^5\text{ J}

    You applied the First Law formula correctly and maintained matching units across terms, but your final answer is off because of the incorrect value of QQ from step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled the relationship between heat, power, and time (Q=P⋅tQ = P \cdot t).

You correctly used the First Law of Thermodynamics formula (ΔU=Q−Wby\Delta U = Q - W_\text{by}).

You properly matched units when subtracting WbyW_\text{by} from QQ.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Time unit conversion omission

You substituted t=4.00t = 4.00 directly without multiplying by 60 s/min60\text{ s/min}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the implicit base units of derived SI units: a watt is a joule per second (J/s\text{J/s}), which requires all time variables to be in seconds before evaluating energy.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unpack derived units into base SI units
  • 1 W=1 J/s1\text{ W} = 1\text{ J/s}

  • Whenever you multiply power by time, confirm that time is in seconds so the units cancel cleanly: (J/s)×s=J(\text{J/s}) \times \text{s} = \text{J}.

Perform dimensional check before calculating
  • [W]×[min]=60 J≠1 J[\text{W}] \times [\text{min}] = 60\text{ J} \neq 1\text{ J}

  • Write out unit labels during scratch work to catch unconverted minutes or hours.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Δt=4.00 min×60 s/min=240 s\Delta t = 4.00\text{ min} \times 60\text{ s/min} = 240\text{ s}

  2. Q=P⋅Δt=450 W×240 s=108,000 J=108 kJQ = P \cdot \Delta t = 450\text{ W} \times 240\text{ s} = 108{,}000\text{ J} = 108\text{ kJ}

  3. ΔU=Q−Wby=108 kJ−1.45 kJ=106.55 kJ≈1.07×105 J\Delta U = Q - W_\text{by} = 108\text{ kJ} - 1.45\text{ kJ} = 106.55\text{ kJ} \approx 1.07 \times 10^5\text{ J}

Final answer

1.07×105 J1.07 \times 10^5\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting non-standard time units (minutes, hours) immediately during the 'given information' step.

  • Write units explicitly beside each numerical value in the calculation line to verify dimensional consistency.

OverviewACEpath Teacher's Diagnosis

02 The student misapplies the sign convention of work in the first law of thermodynamics by adding work done by the system instead of subtracting it.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    t=4.00⋅60=240 s  ⟹  Q=P⋅t=450⋅240=108000 J=108.0 kJt = 4.00 \cdot 60 = 240\text{ s} \implies Q = P \cdot t = 450 \cdot 240 = 108000\text{ J} = 108.0\text{ kJ}

  2. Step 2

    ΔU=Q+Wby=108.0 kJ+1.45 kJ=109.45 kJ\Delta U = Q + W_\text{by} = 108.0\text{ kJ} + 1.45\text{ kJ} = 109.45\text{ kJ}

    Correct

    ΔU=Q−Wby=108.0 kJ−1.45 kJ=106.55 kJ≈1.07×105 J\Delta U = Q - W_\text{by} = 108.0\text{ kJ} - 1.45\text{ kJ} = 106.55\text{ kJ} \approx 1.07 \times 10^5\text{ J}

    You added WbyW_\text{by} instead of subtracting it. When a substance expands, it performs work on the surroundings, meaning energy leaves the system, so the First Law requires ΔU=Q−Wby\Delta U = Q - W_\text{by}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the heating duration of 4.00 minutes4.00\text{ minutes} into 240 seconds240\text{ seconds}.

You correctly applied the relationship Q=P⋅tQ = P \cdot t to obtain 108.0 kJ108.0\text{ kJ} of added thermal energy.

You maintained consistent units of kilojoules before combining thermal energy and boundary work.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
First Law Work Sign Convention

You wrote the First Law equation as ΔU=Q+Wby\Delta U = Q + W_\text{by} instead of ΔU=Q−Wby\Delta U = Q - W_\text{by}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the formulation of the First Law that uses work done by the system (ΔU=Q−Wby\Delta U = Q - W_\text{by}) with the chemistry convention using work done on the system (ΔU=Q+Won\Delta U = Q + W_\text{on}). Because the sample expands, it pushes against the surroundings and spends energy doing work, which reduces the internal energy gain.

REASONING PATH
Your ACEpath teacher’s suggested approach
Energy Direction Check
  • Heat entering the system adds energy (Q>0Q > 0), while expansion work done by the system removes energy (Wby>0W_\text{by} > 0).

  • Ask whether work represents energy entering or leaving the system; if the system expands against external surroundings, subtract that work from QQ.

Formulation Sanity Check
  • The standard physics form is ΔU=Q−Wby\Delta U = Q - W_\text{by}, where WbyW_\text{by} is work done by the system.

  • Always check whether the variable is defined as WbyW_\text{by} (subtract) or WonW_\text{on} (add).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the First Law of Thermodynamics using work done by the system: ΔU=Q−Wby\Delta U = Q - W_\text{by}.

  2. Substitute Q=108.0 kJQ = 108.0\text{ kJ} and Wby=1.45 kJW_\text{by} = 1.45\text{ kJ}: ΔU=108.0 kJ−1.45 kJ=106.55 kJ\Delta U = 108.0\text{ kJ} - 1.45\text{ kJ} = 106.55\text{ kJ}.

  3. Express the answer in standard scientific notation to three significant figures: ΔU=1.07×105 J\Delta U = 1.07 \times 10^5\text{ J}.

Final answer

1.07×105 J1.07 \times 10^5\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between work done by a system (WbyW_\text{by}) and work done on a system (WonW_\text{on}).

  • Perform a physical sanity check on your result: if a system expands while being heated, the net internal energy gain must be less than the total heat input.

OverviewACEpath Teacher's Diagnosis

03 The student assumes that since temperature is constant during a phase change, the internal energy change ΔU must be zero, ignoring latent heat and expansion work.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔT=48.0∘C−48.0∘C=0∘C\Delta T = 48.0^\circ\text{C} - 48.0^\circ\text{C} = 0^\circ\text{C}

  2. Step 2

    Since the temperature remains constant during phase change, ΔU=0 kJ\text{Since the temperature remains constant during phase change, } \Delta U = 0\text{ kJ}

    Correct

    Q=P⋅Δt=450 W×240 s=108,000 J  ⟹  ΔU=Q−Wby=108,000 J−1,450 J=1.07×105 JQ = P \cdot \Delta t = 450\text{ W} \times 240\text{ s} = 108{,}000\text{ J} \implies \Delta U = Q - W_\text{by} = 108{,}000\text{ J} - 1{,}450\text{ J} = 1.07 \times 10^5\text{ J}

    The condition ΔU∝ΔT\Delta U \propto \Delta T applies strictly to ideal gases with no phase changes. During melting, heat is absorbed to overcome intermolecular bonds, altering the internal potential energy. You need to calculate the heat supplied, Q=PΔtQ = P \Delta t, and apply ΔU=Q−Wby\Delta U = Q - W_\text{by}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the phase transition is an isothermal process where temperature stays constant.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating isothermal phase change with zero internal energy change

You equated ΔT=0\Delta T = 0 with ΔU=0\Delta U = 0, which holds only for ideal gases without state changes, overlooking the latent heat absorbed to break intermolecular bonds.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing thermal kinetic energy (measured by temperature) with total internal energy (which includes microscopic bond potential energy), leading to an omission of the First Law of Thermodynamics during phase transitions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Internal Energy in Phase Transitions
  • Internal energy consists of microscopic kinetic energy (temperature-dependent) and microscopic potential energy (intermolecular configuration).

  • Whenever a substance melts or vaporizes at constant temperature, account for the absorbed latent heat increasing internal potential energy.

First Law Application
  • ΔU=Q−Wby\Delta U = Q - W_\text{by} always governs closed-system energy balances regardless of whether ΔT=0\Delta T = 0.

  • Calculate the heat input from power and duration (Q=PΔtQ = P \Delta t), convert all energy quantities to consistent units (Joules), and subtract boundary work.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert heating time to seconds: Δt=4.00 min×60 s/min=240 s\Delta t = 4.00\text{ min} \times 60\text{ s/min} = 240\text{ s}.

  2. Compute the total heat added: Q=PΔt=450 W×240 s=108,000 JQ = P \Delta t = 450\text{ W} \times 240\text{ s} = 108{,}000\text{ J}.

  3. Express boundary work in Joules: Wby=1.45 kJ=1,450 JW_\text{by} = 1.45\text{ kJ} = 1{,}450\text{ J}.

  4. Apply the First Law: ΔU=Q−Wby=108,000 J−1,450 J=106,550 J\Delta U = Q - W_\text{by} = 108{,}000\text{ J} - 1{,}450\text{ J} = 106{,}550\text{ J}.

Final answer

1.07×105 J1.07 \times 10^5\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between thermal kinetic energy (governed by temperature) and phase potential energy (governed by latent heat).

  • Always start energy balance problems by writing out the First Law of Thermodynamics: ΔU=Q−Wby\Delta U = Q - W_\text{by}.

Lock it in

Similar question

01

A 300 W300\text{ W} immersion heater melts an ice block at 0∘C0^\circ\text{C} over 2.50 minutes2.50\text{ minutes}. During this phase change, the system contracts slightly, with the surroundings doing 0.12 kJ0.12\text{ kJ} of work on the ice (Wby=−0.12 kJW_\text{by} = -0.12\text{ kJ}). Find the change in internal energy ΔU\Delta U of the sample.

Answer

ΔU=4.51×104 J\Delta U = 4.51 \times 10^4\text{ J} (or 45.1 kJ45.1\text{ kJ}). Key steps: Δt=2.50×60=150 s\Delta t = 2.50 \times 60 = 150\text{ s}; Q=300 W×150 s=45,000 J=45.0 kJQ = 300\text{ W} \times 150\text{ s} = 45{,}000\text{ J} = 45.0\text{ kJ}; ΔU=Q−Wby=45.0 kJ−(−0.12 kJ)=45.12 kJ≈45.1 kJ\Delta U = Q - W_\text{by} = 45.0\text{ kJ} - (-0.12\text{ kJ}) = 45.12\text{ kJ} \approx 45.1\text{ kJ}.

02

A substance with latent heat of fusion Lf=1.20×105 J/kgL_f = 1.20 \times 10^5\text{ J/kg} and mass 0.500 kg0.500\text{ kg} is melted at constant temperature by an electric coil in 5.00 minutes5.00\text{ minutes}. During the transition, the substance does 850 J850\text{ J} of expansion work. Find the electrical power rating PP of the coil (assuming no heat loss) and the change in internal energy ΔU\Delta U.

Answer

P=200 WP = 200\text{ W} and ΔU=5.92×104 J\Delta U = 5.92 \times 10^4\text{ J}. Key steps: Q=mLf=0.500 kg×1.20×105 J/kg=60,000 JQ = m L_f = 0.500\text{ kg} \times 1.20 \times 10^5\text{ J/kg} = 60{,}000\text{ J}; Δt=5.00×60=300 s\Delta t = 5.00 \times 60 = 300\text{ s}; P=Q/Δt=60,000/300=200 WP = Q / \Delta t = 60{,}000 / 300 = 200\text{ W}; ΔU=Q−Wby=60,000 J−850 J=59,150 J≈5.92×104 J\Delta U = Q - W_\text{by} = 60{,}000\text{ J} - 850\text{ J} = 59{,}150\text{ J} \approx 5.92 \times 10^4\text{ J}.

03

A cylinder containing 0.400 kg0.400\text{ kg} of a solid compound at its melting point receives 650 W650\text{ W} from a heating element for 6.00 minutes6.00\text{ minutes}. As it melts, it expands against a constant external pressure of 1.00×105 Pa1.00 \times 10^5\text{ Pa}, increasing its volume by 2.50×10−3 m32.50 \times 10^{-3}\text{ m}^3. Calculate: (a) the work done by the substance WbyW_\text{by}, and (b) the change in internal energy ΔU\Delta U.

Answer

(a) Wby=250 JW_\text{by} = 250\text{ J}; (b) ΔU=2.34×105 J\Delta U = 2.34 \times 10^5\text{ J}. Key steps: (a) Wby=PextΔV=(1.00×105 Pa)(2.50×10−3 m3)=250 JW_\text{by} = P_\text{ext} \Delta V = (1.00 \times 10^5\text{ Pa})(2.50 \times 10^{-3}\text{ m}^3) = 250\text{ J}; (b) Δt=6.00×60=360 s\Delta t = 6.00 \times 60 = 360\text{ s}; Q=650 W×360 s=234,000 JQ = 650\text{ W} \times 360\text{ s} = 234{,}000\text{ J}; ΔU=Q−Wby=234,000 J−250 J=233,750 J≈2.34×105 J\Delta U = Q - W_\text{by} = 234{,}000\text{ J} - 250\text{ J} = 233{,}750\text{ J} \approx 2.34 \times 10^5\text{ J}.

Loading workspace…