Resources

A particle moves clockwise in the xyxy-plane along a circular trajectory centered at the origin. At a particular instant, the particle passes through the first quadrant where its radial position vector forms an angle θ=35.0∘\theta = 35.0^\circ measured counterclockwise from the positive xx-axis. Determine the direction angle ϕ\phi of the instantaneous velocity vector v⃗\vec{v}, measured counterclockwise from the positive xx-axis (where 0∘≤ϕ<360∘0^\circ \le \phi < 360^\circ).

Answer and steps

Final answer

ϕ=305.0∘\phi = 305.0^\circ (or −55.0∘-55.0^\circ, directed perpendicular to the position vector in the clockwise direction).

Steps

01

Relate the Velocity Vector to the Position Vector

In any circular motion:

  • The instantaneous velocity vector v⃗\vec{v} is tangent to the circular path at the particle's position.
  • The tangent line is perpendicular to the radial position vector r⃗\vec{r} (r⃗⋅v⃗=0\vec{r} \cdot \vec{v} = 0).
02

Determine the Direction of the Tangent

The direction of v⃗\vec{v} depends on the sense of rotation:

  • If the motion were counterclockwise, the velocity vector would be rotated 90∘90^\circ counterclockwise relative to r⃗\vec{r}.
  • Because the motion is clockwise, the velocity vector points in the direction of clockwise travel, which is rotated 90∘90^\circ clockwise (or −90∘-90^\circ) from r⃗\vec{r}.
03

Calculate the Direction Angle ϕ\phi

The position vector has an angle of θ=35.0∘\theta = 35.0^\circ counterclockwise from the positive xx-axis. Subtracting 90.0∘90.0^\circ for clockwise motion gives:

ϕ=35.0∘−90.0∘=−55.0∘\phi = 35.0^\circ - 90.0^\circ = -55.0^\circ

To express the angle in standard form within the interval 0∘≤ϕ<360∘0^\circ \le \phi < 360^\circ, add 360.0∘360.0^\circ:

ϕ=−55.0∘+360.0∘=305.0∘\phi = -55.0^\circ + 360.0^\circ = 305.0^\circ

Common Pitfall: Adding 90∘90^\circ instead of subtracting gives 125.0∘125.0^\circ, which represents counterclockwise motion. Always check that the velocity vector points into the fourth quadrant (pointing downward and to the right) as expected for clockwise movement through the first quadrant.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes counterclockwise rotation instead of clockwise, adding 90.0° instead of subtracting 90.0°.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    \vec{v}$$\text{ is tangent to the circle, so }$$\vec{v} \perp r⃗\vec{r}

  2. Step 2

    ϕ=35.0∘+90.0∘  ⟹  ϕ=125.0∘\phi = 35.0^\circ + 90.0^\circ \implies \phi = 125.0^\circ

    Correct

    ϕ\phi = 35.0^∘\circ - 90.0^∘\circ = -55.0^∘\circ   ⟹  \implies ϕ\phi = 305.0^∘\circ

    Adding 90.0∘90.0^\circ corresponds to counterclockwise rotation. Because the particle moves clockwise, you must subtract 90.0∘90.0^\circ from the position angle (or add 270.0∘270.0^\circ), giving ϕ=35.0∘−90.0∘=−55.0∘\phi = 35.0^\circ - 90.0^\circ = -55.0^\circ, which is 305.0∘305.0^\circ in standard range.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated that the velocity vector is tangent to the path and perpendicular to the radial position vector.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention error / Incorrect rotation sense

You added 90.0∘90.0^\circ instead of subtracting 90.0∘90.0^\circ, which treats the circular motion as counterclockwise rather than clockwise.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the standard positive mathematical angle direction (counterclockwise) with the physical travel direction of the particle (clockwise). For circular motion, rotating +90∘+90^\circ from r⃗\vec{r} points in the counterclockwise direction, whereas clockwise motion requires rotating −90∘-90^\circ from r⃗\vec{r}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of Velocity in Circular Motion
  • For circular motion centered at the origin, counterclockwise velocity points at θ+90∘\theta + 90^\circ, while clockwise velocity points at θ−90∘\theta - 90^\circ.

  • Always sketch the position vector and draw the tangent arrow pointing along the stated direction of motion (clockwise vs. counterclockwise) to verify which quadrant the velocity must lie in.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start from the position angle θ=35.0∘\theta = 35.0^\circ.

  2. Since the motion is clockwise, rotate by −90.0∘-90.0^\circ: ϕ=35.0∘−90.0∘=−55.0∘\phi = 35.0^\circ - 90.0^\circ = -55.0^\circ.

  3. Add 360.0∘360.0^\circ to place the angle in the interval 0∘≤ϕ<360∘0^\circ \le \phi < 360^\circ: ϕ=−55.0∘+360.0∘=305.0∘\phi = -55.0^\circ + 360.0^\circ = 305.0^\circ.

Final answer

ϕ=305.0∘\phi = 305.0^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Re-read motion descriptions carefully to highlight words like 'clockwise' or 'counterclockwise'.

  • Draw a quick Cartesian sketch showing r⃗\vec{r} and the tangent vector pointing along the actual direction of motion before calculating angle offsets.

OverviewACEpath Teacher's Diagnosis

02 The student subtracts 90.0° to find the clockwise direction but reports the negative angle directly without converting it to the requested 0° to 360° interval.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Clockwise tangent means rotating by −90.0∘-90.0^\circ from r⃗  ⟹  ϕ=35.0∘−90.0∘=−55.0∘\vec{r} \implies \phi = 35.0^\circ - 90.0^\circ = -55.0^\circ

  2. Step 2

    ϕ=−55.0∘\phi = -55.0^\circ

    Correct

    ϕ=−55.0∘+360.0∘=305.0∘\phi = -55.0^\circ + 360.0^\circ = 305.0^\circ

    You reported the negative angle directly, but the problem explicitly requires the direction angle to satisfy 0∘≤ϕ<360∘0^\circ \le \phi < 360^\circ.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the instantaneous velocity vector is tangent to the circular path and perpendicular to the radial position vector.

You correctly subtracted 90.0∘90.0^\circ to account for the clockwise direction of motion.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Boundary or range constraint missed

You did not add 360.0∘360.0^\circ to convert your negative angle into the required interval 0∘≤ϕ<360∘0^\circ \le \phi < 360^\circ.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You stopped calculating once you found an angle representing the physical orientation without checking the domain constraints specified for standard vector angles.

REASONING PATH
Your ACEpath teacher’s suggested approach
Angle Range Verification
  • A standard counterclockwise direction angle in 0∘≤ϕ<360∘0^\circ \le \phi < 360^\circ cannot be negative.

  • Whenever an angle calculation yields a negative value ϕ<0∘\phi < 0^\circ, add 360.0∘360.0^\circ to find the coterminal angle in the standard positive range.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Add 360.0∘360.0^\circ to obtain the coterminal angle within [0∘,360∘)[0^\circ, 360^\circ): ϕ=−55.0∘+360.0∘=305.0∘\phi = -55.0^\circ + 360.0^\circ = 305.0^\circ.](streamdown:incomplete-link)

Final answer

ϕ=305.0∘\phi = 305.0^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Always re-read the angle interval specified in the prompt (0∘≤ϕ<360∘0^\circ \le \phi < 360^\circ) before boxing your final answer.

  • Check the quadrant of your final angle: since the particle moves clockwise from the first quadrant, v⃗\vec{v} points down and right into the fourth quadrant, matching 270∘<ϕ<360∘270^\circ < \phi < 360^\circ.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the direction of the velocity vector with the radial position vector itself, reporting θ directly as the direction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    θ=35.0∘\theta = 35.0^\circ

  2. Step 2

    ϕ=θ=35.0∘\phi = \theta = 35.0^\circ

    Correct

    ϕ=35.0∘−90.0∘=−55.0∘≡305.0∘\phi = 35.0^\circ - 90.0^\circ = -55.0^\circ \equiv 305.0^\circ

    You assumed the velocity vector points in the same direction as the position vector. Because the particle moves clockwise along a circle, its velocity vector is perpendicular to the radial position vector, directed 90.0∘90.0^\circ clockwise from r⃗\vec{r}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly extracted the particle's angular position θ=35.0∘\theta = 35.0^\circ from the problem statement.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing radial position direction with tangential velocity direction

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the direction of motion as radially outward along the position vector rather than perpendicular and tangent to the circular path. In uniform or non-uniform circular motion, the velocity vector v⃗\vec{v} must always satisfy r⃗⋅v⃗=0\vec{r} \cdot \vec{v} = 0.

REASONING PATH
Your ACEpath teacher’s suggested approach
Tangential Velocity Principle
  • In circular motion, the instantaneous velocity vector is always perpendicular to the radial position vector (v⃗⊥r⃗\vec{v} \perp \vec{r}).

  • Always draw the circular path and sketch the velocity vector tangent to the circle pointing in the direction of travel before writing an angle equation.

Sense of Rotation Angle Shift
  • For counterclockwise motion, rotate +90∘+90^\circ from r⃗\vec{r}; for clockwise motion, rotate −90∘-90^\circ (or +270∘+270^\circ) from r⃗\vec{r}.

  • Subtract 90.0∘90.0^\circ from the position angle θ\theta when motion is clockwise, then add 360.0∘360.0^\circ if necessary to bring the angle into [0∘,360∘)[0^\circ, 360^\circ).](streamdown:incomplete-link)

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that velocity v⃗\vec{v} is tangent to the circle and points in the clockwise direction, which is rotated by −90.0∘-90.0^\circ relative to r⃗\vec{r}.

  2. Compute the raw direction angle: ϕ=35.0∘−90.0∘=−55.0∘\phi = 35.0^\circ - 90.0^\circ = -55.0^\circ.

  3. Convert to standard interval 0∘≤ϕ<360∘0^\circ \le \phi < 360^\circ: ϕ=−55.0∘+360.0∘=305.0∘\phi = -55.0^\circ + 360.0^\circ = 305.0^\circ.

Final answer

ϕ=305.0∘\phi = 305.0^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a circle on an xyxy-coordinate system with a position vector r⃗\vec{r} at 35∘35^\circ to visually verify that a clockwise velocity points into the fourth quadrant.

  • Practice determining tangent angles for both clockwise and counterclockwise orbits in various quadrants.

Lock it in

Similar question

01

A particle moves clockwise along a circle centered at the origin. At an instant when its position vector is at θ=150.0∘\theta = 150.0^\circ relative to the positive xx-axis, determine the direction angle ϕ\phi of its velocity vector (0∘≤ϕ<360∘0^\circ \le \phi < 360^\circ).

Answer

ϕ=60.0∘\phi = 60.0^\circ. For clockwise motion, subtract 90.0∘90.0^\circ from the position angle: ϕ=150.0∘−90.0∘=60.0∘\phi = 150.0^\circ - 90.0^\circ = 60.0^\circ.

02

A particle moves clockwise in a circular path centered at the origin. When the particle is at (x,y)=(0,−4 m)(x, y) = (0, -4\text{ m}), determine the direction angle ϕ\phi of its instantaneous velocity vector measured counterclockwise from the positive xx-axis.

Answer

ϕ=180.0∘\phi = 180.0^\circ. The position vector lies along the negative yy-axis (θ=270.0∘\theta = 270.0^\circ). For clockwise motion at the bottom of the circle, the particle moves to the left (negative xx-direction): ϕ=270.0∘−90.0∘=180.0∘\phi = 270.0^\circ - 90.0^\circ = 180.0^\circ.

03

An object travels along a circular path centered at the origin. At a given instant, its position vector is r⃗=(3.00i^−4.00j^) m\vec{r} = (3.00\hat{i} - 4.00\hat{j})\text{ m} and it travels clockwise. Find the unit vector v^\hat{v} in the direction of its instantaneous velocity.

Answer

v^=−0.800i^−0.600j^\hat{v} = -0.800\hat{i} - 0.600\hat{j}. The position vector has angle θ=arctan⁡(−4/3)=−53.13∘\theta = \arctan(-4/3) = -53.13^\circ. Rotating clockwise by 90∘90^\circ gives velocity direction angle ϕ=−53.13∘−90.00∘=−143.13∘\phi = -53.13^\circ - 90.00^\circ = -143.13^\circ. Thus v^=cos⁡(−143.13∘)i^+sin⁡(−143.13∘)j^=−0.800i^−0.600j^\hat{v} = \cos(-143.13^\circ)\hat{i} + \sin(-143.13^\circ)\hat{j} = -0.800\hat{i} - 0.600\hat{j}.

Loading workspace…