Resources

A block of mass m=3.50 kgm = 3.50\text{ kg} is initially at rest on a frictionless horizontal floor. A constant horizontal force F⃗\vec{F} of magnitude 14.0 N14.0\text{ N} is applied to the block in the +x+x-direction for a time interval of Δt=2.50 s\Delta t = 2.50\text{ s}. Identify the primary physical law best suited to directly determine the block's acceleration, state its governing mathematical equation, and calculate the magnitude of the block's acceleration.

Answer and steps

Final answer

Newton's Second Law of Motion; ΣF⃗=ma⃗\Sigma \vec{F} = m\vec{a}; a=4.00 m/s2a = 4.00\text{ m/s}^2.

Steps

01

Identify the Applicable Physical Law

To find the acceleration produced by an applied force acting on a known mass, consider the fundamental relationship between force, mass, and motion:

  • Newton's Second Law of Motion directly relates the net external force acting on an object to the acceleration it experiences.
  • Pitfall to avoid: While kinematic equations or the impulse-momentum theorem (J⃗=Δp⃗\vec{J} = \Delta \vec{p}) can describe the subsequent motion over the time interval Δt=2.50 s\Delta t = 2.50\text{ s}, they are not the primary law linking the instantaneous cause (force) directly to acceleration. Newton's second law gives acceleration in a single, direct step without requiring time or velocity changes.

02

State the Governing Equation

Newton's Second Law in vector form is: ΣF⃗=ma⃗\Sigma \vec{F} = m\vec{a}

Along the vertical (yy) direction, the normal force F⃗N\vec{F}_N balances the gravitational force F⃗g\vec{F}_g, so there is no vertical acceleration: ΣFy=FN−mg=0\Sigma F_y = F_N - mg = 0

Along the horizontal (xx) direction, because the surface is frictionless, the only force acting is the applied force F⃗\vec{F}: ΣFx=F=max\Sigma F_x = F = ma_x


03

Calculate the Magnitude of the Acceleration

Rearranging the horizontal component equation to solve for the magnitude of acceleration aa: a=Fma = \frac{F}{m}

Substitute the given values (F=14.0 NF = 14.0\text{ N} and m=3.50 kgm = 3.50\text{ kg}): a=14.0 N3.50 kg=4.00 m/s2a = \frac{14.0\text{ N}}{3.50\text{ kg}} = 4.00\text{ m/s}^2

Thus, the primary law is Newton's Second Law of Motion, its governing equation is ΣF⃗=ma⃗\Sigma \vec{F} = m\vec{a}, and the magnitude of the acceleration is 4.00 m/s24.00\text{ m/s}^2.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the relationship between force, mass, and acceleration by multiplying force and mass instead of dividing, resulting in an acceleration of 49.0 m/s².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Newton's second law of motion

  2. Step 2

    a=Fma = Fm

    Correct

    ΣF⃗=ma⃗  ⟹  a=Fm\Sigma \vec{F} = m\vec{a} \implies a = \frac{F}{m}

    Newton's second law states that F=maF = ma. Solving for acceleration requires dividing both sides by mass mm, giving a=Fma = \frac{F}{m}, not a=Fma = Fm.

  3. Step 3

    a=(14.0 N)(3.50 kg)=49.0 m/s2a = (14.0\text{ N})(3.50\text{ kg}) = 49.0\text{ m/s}^2

    Correct

    a=14.0 N3.50 kg=4.00 m/s2a = \frac{14.0\text{ N}}{3.50\text{ kg}} = 4.00\text{ m/s}^2

    Because you used the incorrect product a=Fma = Fm, you multiplied force by mass instead of evaluating 14.0 N3.50 kg\frac{14.0\text{ N}}{3.50\text{ kg}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly selected Newton's second law of motion as the governing law.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic rearrangement error

You set acceleration equal to the product of force and mass rather than their quotient.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You misremembered or incorrectly rearranged F=maF = ma. When isolating acceleration, dividing by mass yields a=Fma = \frac{F}{m}, which reflects that larger mass reduces acceleration for a fixed force.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate variables using inverse operations
  • Since F=m⋅aF = m \cdot a, undo the multiplication by dividing both sides by mm: a=Fma = \frac{F}{m}.

  • Always write down the fundamental law ΣF=ma\Sigma F = ma first before rearranging to solve for the target variable.

Perform a unit check
  • 1 N=1 kg⋅m/s21\text{ N} = 1\text{ kg}\cdot\text{m/s}^2, so Nkg=m/s2\frac{\text{N}}{\text{kg}} = \text{m/s}^2, whereas N⋅kg=kg2⋅m/s2\text{N}\cdot\text{kg} = \text{kg}^2\cdot\text{m/s}^2.

  • Check that the units of your rearranged expression cancel out to m/s2\text{m/s}^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start from the horizontal component of Newton's second law: F=maF = ma.

  2. Divide both sides by mm to isolate aa: a=Fma = \frac{F}{m}.

  3. Substitute the given numerical values: a=14.0 N3.50 kg=4.00 m/s2a = \frac{14.0\text{ N}}{3.50\text{ kg}} = 4.00\text{ m/s}^2.

Final answer

Newton's Second Law of Motion; ΣF⃗=ma⃗\Sigma \vec{F} = m\vec{a}; a=4.00 m/s2a = 4.00\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Write the standard base equation ΣF⃗=ma⃗\Sigma \vec{F} = m\vec{a} before isolating any unknown quantity.

  • Verify your rearranged formulas using dimensional analysis to ensure the final units match the target physical quantity.

OverviewACEpath Teacher's Diagnosis

02 The student misinverts the equation for Newton's second law as a = m / F, yielding an acceleration of 0.250 m/s².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Newton's second law of motion

  2. Step 2

    a=mFa = \frac{m}{F}

    Correct

    ΣFx=F=ma  ⟹  a=Fm\Sigma F_x = F = ma \implies a = \frac{F}{m}

    Newton's second law states that F=maF = ma. Dividing both sides by mass mm gives a=Fma = \frac{F}{m}, but you wrote a=mFa = \frac{m}{F}.

  3. Step 3

    a=3.50 kg14.0 N=0.250 m/s2a = \frac{3.50\text{ kg}}{14.0\text{ N}} = 0.250\text{ m/s}^2

    Correct

    a=14.0 N3.50 kg=4.00 m/s2a = \frac{14.0\text{ N}}{3.50\text{ kg}} = 4.00\text{ m/s}^2

    You calculated 3.5014.0=0.250\frac{3.50}{14.0} = 0.250 accurately based on your formula, but this value is incorrect because it used the inverted ratio.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified Newton's second law of motion as the governing physical principle.

You substituted the given numerical values and tracked proper significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Inversion Error

You accidentally placed mass in the numerator and force in the denominator when isolating acceleration.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You solved F=maF = ma for aa by inverting the division or confusing the relationship between net force, mass, and acceleration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate the Unknown Variable
  • Start from the fundamental statement F=maF = ma. To isolate aa, divide both sides by the coefficient mm: a=Fma = \frac{F}{m}.

  • Write out the base equation F=maF = ma first before rearranging to avoid numerator-denominator flips.

Unit and Dimensional Check
  • 1 N=1 kg⋅m/s21\text{ N} = 1\text{ kg}\cdot\text{m/s}^2, so Nkg=m/s2\frac{\text{N}}{\text{kg}} = \text{m/s}^2, whereas kgN=s2m\frac{\text{kg}}{\text{N}} = \frac{\text{s}^2}{\text{m}}.

  • Verify that your fraction's units simplify to units of acceleration (m/s2\text{m/s}^2) before carrying out the division.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply Newton's second law in the horizontal direction: ΣFx=max  ⟹  F=ma\Sigma F_x = ma_x \implies F = ma.

  2. Divide both sides by mm to solve for acceleration: a=Fma = \frac{F}{m}.

  3. Substitute the given quantities: a=14.0 N3.50 kg=4.00 m/s2a = \frac{14.0\text{ N}}{3.50\text{ kg}} = 4.00\text{ m/s}^2.

Final answer

Newton's Second Law of Motion; ΣF⃗=ma⃗\Sigma \vec{F} = m\vec{a}; a=4.00 m/s2a = 4.00\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write the standard form F=maF = ma explicitly before rearranging it.

  • Use a quick unit check: ensure force is divided by mass so that kg⋅m/s2\text{kg}\cdot\text{m/s}^2 divided by kg\text{kg} leaves m/s2\text{m/s}^2.

OverviewACEpath Teacher's Diagnosis

03 The student confuses acceleration with final velocity by calculating impulse divided by mass as the acceleration, yielding 10.0 m/s².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Impulse-momentum theorem

    Correct

    Newton's Second Law of Motion

    The impulse-momentum theorem relates force and time to the change in momentum (or velocity), whereas Newton's second law directly relates net force to acceleration without depending on elapsed time.

  2. Step 2

    a=FΔtma = \frac{F \Delta t}{m}

    Correct

    ΣF⃗=ma⃗  ⟹  a=Fm\Sigma \vec{F} = m\vec{a} \implies a = \frac{F}{m}

    The quantity FΔtm\frac{F \Delta t}{m} represents the change in velocity Δv\Delta v, not the acceleration aa. The direct governing equation relating force to acceleration is F=maF = ma.

  3. Step 3

    a=(14.0 N)(2.50 s)3.50 kg=10.0 m/s2a = \frac{(14.0\text{ N})(2.50\text{ s})}{3.50\text{ kg}} = 10.0\text{ m/s}^2

    Correct

    a=14.0 N3.50 kg=4.00 m/s2a = \frac{14.0\text{ N}}{3.50\text{ kg}} = 4.00\text{ m/s}^2

    Because time Δt\Delta t was included in the numerator, your calculation yielded a numerical value of 10.0 m/s10.0\text{ m/s} (the final velocity after 2.50 s2.50\text{ s}) rather than the constant acceleration of 4.00 m/s24.00\text{ m/s}^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the numerical values for force, mass, and time given in the problem statement.

You carried out the arithmetic evaluation accurately for the expression you set up.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
confusing acceleration with velocity change

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the product of force and time over mass (FΔt/mF\Delta t / m) as acceleration instead of change in velocity, conflating instantaneous dynamic response (F=maF = ma) with accumulated momentum change (J=ΔpJ = \Delta p).

REASONING PATH
Your ACEpath teacher’s suggested approach
Match target quantity to physical law
  • Net force causes instantaneous acceleration according to Newton's second law: ΣF=ma\Sigma F = ma.

  • When asked for acceleration from a known net force and mass, use a=F/ma = F / m directly without multiplying by elapsed time.

Check physical dimensions and units
  • N⋅skg=(kg⋅m/s2)⋅skg=m/s\frac{\text{N}\cdot\text{s}}{\text{kg}} = \frac{(\text{kg}\cdot\text{m/s}^2)\cdot\text{s}}{\text{kg}} = \text{m/s}, which is a unit of velocity, not acceleration (m/s2\text{m/s}^2).

  • Track your units through the algebra to confirm that your final expression yields the expected dimensions of m/s2\text{m/s}^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State Newton's Second Law of Motion: ΣF⃗=ma⃗\Sigma \vec{F} = m\vec{a}.

  2. Set up the horizontal component equation on the frictionless floor: F=maF = ma.

  3. Solve for the acceleration magnitude: a=Fm=14.0 N3.50 kg=4.00 m/s2a = \frac{F}{m} = \frac{14.0\text{ N}}{3.50\text{ kg}} = 4.00\text{ m/s}^2.

Final answer

Newton's Second Law of Motion; ΣF⃗=ma⃗\Sigma \vec{F} = m\vec{a}; a=4.00 m/s2a = 4.00\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between instantaneous quantities (acceleration aa) and interval-dependent quantities (velocity change Δv\Delta v and impulse JJ).

  • Practice performing dimensional checks on derived formulas before substituting numerical values.

Lock it in

Similar question

01

A horizontal net force of 18.0 N18.0\text{ N} acts on a toy cart of mass 6.00 kg6.00\text{ kg} on a smooth surface. Calculate the magnitude of the cart's acceleration.

Answer

a=Fm=18.0 N6.00 kg=3.00 m/s2a = \frac{F}{m} = \frac{18.0\text{ N}}{6.00\text{ kg}} = 3.00\text{ m/s}^2.

02

Two horizontal forces act along the xx-axis on an 8.0 kg8.0\text{ kg} crate: F⃗1=30.0 N\vec{F}_1 = 30.0\text{ N} in the +x+x-direction and F⃗2=14.0 N\vec{F}_2 = 14.0\text{ N} in the −x-x-direction. Find the magnitude and direction of the crate's acceleration.

Answer

Net force: ΣFx=30.0 N−14.0 N=16.0 N\Sigma F_x = 30.0\text{ N} - 14.0\text{ N} = 16.0\text{ N} in the +x+x-direction. Acceleration: ax=ΣFxm=16.0 N8.0 kg=2.0 m/s2a_x = \frac{\Sigma F_x}{m} = \frac{16.0\text{ N}}{8.0\text{ kg}} = 2.0\text{ m/s}^2 in the +x+x-direction.

03

A 4.00 kg4.00\text{ kg} block is pulled along a rough horizontal table by a constant horizontal force of 22.0 N22.0\text{ N}. A constant kinetic friction force of 6.0 N6.0\text{ N} opposes the motion. Determine the block's acceleration.

Answer

Net horizontal force: ΣF=Fpull−fk=22.0 N−6.0 N=16.0 N\Sigma F = F_{\text{pull}} - f_k = 22.0\text{ N} - 6.0\text{ N} = 16.0\text{ N}. Acceleration: a=ΣFm=16.0 N4.00 kg=4.00 m/s2a = \frac{\Sigma F}{m} = \frac{16.0\text{ N}}{4.00\text{ kg}} = 4.00\text{ m/s}^2.

Loading workspace…