Resources
An instrument package of mass is pulled along a flat concrete runway by a constant tension force acting at an angle above the horizontal. Under these non-equilibrium conditions, the package accelerates uniformly from rest across the surface with an acceleration . Assuming the package remains in continuous contact with the ground and taking , reverse-engineer the kinetic interaction to determine the coefficient of kinetic friction between the package and the runway.
Answer and steps
Final answer
Steps
Identify Forces and Establish Coordinate System
Set up a Cartesian coordinate system with the positive -axis oriented horizontally in the direction of motion (to the right) and the positive -axis pointing vertically upward.
The forces acting on the package are:
- Tension force (): Pulling at magnitude at an angle above the horizontal.
- Gravitational force (): Acting vertically downward, .
- Normal force (): Exerted upward by the runway, perpendicular to the surface.
- Kinetic friction force (): Opposing the horizontal motion, directed to the left.
Resolve the tension into horizontal and vertical components:
Vertical Force Balance (Equilibrium)
Because the package accelerates purely along the horizontal runway, there is no motion or acceleration in the vertical direction (). Apply Newton's first law in the -direction:
Solve for the normal force :
Substitute the given values (, , and ):
Common Pitfall: Do not assume the normal force simply equals the weight (). Because the tension has an upward vertical component, it partially supports the package's weight, thereby reducing the normal force and consequently decreasing the friction force.
Horizontal Motion (Non-Equilibrium)
Along the horizontal direction, the package accelerates uniformly at . Apply Newton's second law in the -direction:
Solve for the kinetic friction force :
Calculate the net force required to accelerate the mass:
Thus, the force of friction is:
Calculate the Coefficient of Kinetic Friction
By definition, the magnitude of kinetic friction is related to the normal force by:
Rearranging for :
Substitute the values found in the previous steps:
Typical errors
01 The student forgets that the upward tension component reduces the normal force and incorrectly sets N = mg.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because the tension pulls at an angle above the horizontal, its vertical component helps lift the package. The vertical equilibrium requires , which reduces the normal force exerted by the ground.
- Step 2
- Step 3Correct
Your formula is correct, but substituting the incorrect value of carried the earlier mistake into your final coefficient.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved the horizontal component of the tension force using .
You correctly applied Newton's second law in the horizontal direction to calculate the kinetic friction force .
You correctly related the kinetic friction force to the normal force using .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeSetting automatically without writing out the vertical force balance equation .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the normal force as a fixed quantity equal to weight rather than as a constraining contact force that adjusts to balance all forces acting perpendicular to the surface.
REASONING PATH
Your ACEpath teacher’s suggested approach- Vertical Force Balance
For an object on a horizontal surface in vertical equilibrium, .
Always draw a free-body diagram and solve for explicitly before calculating friction.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the vertical equilibrium condition:
Solve for the normal force:
Compute the coefficient of kinetic friction:
02 The student assumes the package is moving at constant velocity and omits the m a acceleration term when solving for the friction force.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You set the horizontal net force to zero, assuming constant velocity or equilibrium. Because the package accelerates horizontally at , you must include the non-zero net force term .
- Step 3Correct
Your formula and division were logically sound, but the numerical result is inaccurate because it carried over the incorrect friction value from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved the tension force into vertical and horizontal components.
You recognized that the upward component of tension reduces the normal force exerted by the ground.
You correctly applied the relationship .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo slip occurred; you deliberately applied an equilibrium condition instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated horizontal non-equilibrium motion with vertical static equilibrium, overlooking that an accelerating body requires a non-zero net force along its axis of motion.
REASONING PATH
Your ACEpath teacher’s suggested approach- State Check: Equilibrium vs. Non-Equilibrium
If an object has a non-zero acceleration along an axis, . Only use when velocity is constant or zero along that axis.
Always circle or highlight given accelerations in the prompt before writing force-balance equations.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the equation of motion for the horizontal direction: .
Solve for the kinetic friction force: .
Substitute and your previously calculated normal force into .
03 The student swaps sine and cosine, using sin θ for the horizontal force component and cos θ for the vertical component.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
N = mg - T\cos 30.0^ 12.0 9.80 - 75.0\cos 30.0^ = 117.6 - 64.95 = 52.65
CorrectN = mg - T\sin 30.0^ = 117.6 - 37.5 = 80.1
Because the angle is measured relative to the horizontal surface, the vertical component is opposite the angle (), not adjacent to it.
- Step 2
T\sin 30.0^ - f_k = ma 75.0 0.5 - f_k = 12.0 1.45 37.5 - f_k = 17.4 f_k = 20.1
CorrectT\cos 30.0^ - f_k = ma 64.95 - f_k = 17.4 f_k = 47.55
The horizontal pulling force is adjacent to the horizontal angle, which requires rather than .
- Step 3Correct
k = = 0.592
You correctly applied the relationship , but the numerical value was affected by the earlier trigonometric component swap.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that the upward vertical component of tension reduces the normal force.
You applied Newton's second law along the horizontal axis with friction opposing the motion.
You correctly used the definition of kinetic friction to find the final coefficient.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo, this is a conceptual misunderstanding of vector resolution relative to the reference angle.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou associated the horizontal direction with sine and the vertical direction with cosine, reversing the standard geometric definitions where the side adjacent to the given angle uses cosine and the side opposite uses sine.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify adjacent vs. opposite sides
When an angle is measured from the horizontal, the horizontal side is adjacent () and the vertical side is opposite ().
Sketch a right triangle on the force vector and verify which component is adjacent to the angle before writing equilibrium equations.
CORRECTED PATH
ACEpath Teacher's DemonstrationResolve tension: and .
Find normal force: .
Find friction force: .
Calculate coefficient: .
Lock it in
Does the normal force on a horizontal surface always equal ?
No. The normal force adjusts to satisfy . If an external force has a vertical component, .
Similar question
A crate of mass is pushed along a horizontal floor by a force directed at an angle below the horizontal. If , what is the normal force exerted by the floor on the crate?
Answer
. Key steps: Downward forces include weight and the vertical component of the push . From , we find .
A block is pulled across a level surface at constant velocity by a rope inclined at above the horizontal with a tension of . Taking , find the coefficient of kinetic friction .
Answer
. Key steps: (1) Vertical equilibrium: . (2) Horizontal equilibrium (): . (3) Coefficient: .
A container on a horizontal surface with accelerates at when pulled by a tension angled at above the horizontal (). Determine the magnitude of the tension .
Answer
. Key steps: (1) Normal force: . (2) Friction: . (3) Horizontal motion: . (4) Rearrange: .