Resources
A light source is submerged inside a dense flint glass prism (). A laser beam emerges from the glass into an adjacent liquid layer () at an angle of refraction of relative to the interface normal. Work backward to determine the original angle of incidence inside the flint glass.
Answer and steps
Final answer
Steps
Identify the given values
To find the original angle of incidence inside the glass, we use Snell's Law of Refraction, which relates the refractive indices of two media to the angles of incidence and refraction:
- Refractive index of the incident medium (flint glass):
- Refractive index of the refracting medium (liquid):
- Angle of refraction in the liquid:
- Angle of incidence in the glass: (unknown)
Pitfall to avoid: Always measure angles and relative to the normal line (perpendicular to the surface), not relative to the interface itself.
Rearrange Snell's Law for
Isolate :
Substitute the values and calculate
Substitute the numerical values into the equation:
Evaluate :
Now calculate the ratio:
Solve for
Take the inverse sine () of both sides:
The original angle of incidence inside the flint glass is .
Typical errors
01 The student swaps the refractive indices associated with the incident and refracted media in Snell's Law, yielding an impossible sine value greater than 1.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You assigned and , swapping the incident medium (flint glass, ) with the refracting medium (liquid, ).
- Step 3Correct
You evaluated the arithmetic correctly according to your substituted values, but this step carries forward the swapped indices from the previous step.
- Step 4Correct
Your mathematical deduction that yields no real angle was sound, but this impossible result occurred only because the refractive indices were reversed.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled and wrote Snell's Law: .
You correctly calculated .
You correctly recognized that a sine value greater than indicates a contradiction.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou reversed the pairing between the optical media and their respective indices ( and ).
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou associated the smaller index with the originating medium instead of tracing the ray's actual direction of travel from the denser glass into the less dense liquid.
REASONING PATH
Your ACEpath teacher’s suggested approach- Trace the Ray Direction
Medium 1 () is always where the light originates; Medium 2 () is always where the light travels after crossing the boundary.
Label each medium explicitly before writing numbers: Incident = Flint glass (), Refracted = Liquid ().
- Sanity Check on Angles and Indices
Light bends away from the normal when moving into an optically rarer medium ().
Since , verify that and that .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up Snell's Law with the incident glass on the left: .
Substitute , , and : .
Isolate : .
Take the inverse sine: .
02 The student evaluates the trigonometric function in radian mode rather than degree mode, leading to an incorrect negative sine value and invalid angle.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You evaluated in radian mode instead of degree mode. In radians, , whereas .
- Step 3Correct
Your algebraic rearrangement and division were executed accurately, but the result was affected by the earlier radian-mode value.
- Step 4Correct
Taking the inverse sine of your calculated ratio gave an incorrect angle because of the initial radian-mode evaluation error.
WHAT YOU DID WELL
Compliments from Your TeacherYou selected the correct physical relation, Snell's Law ().
You matched the refractive indices to their respective media correctly.
You carried out the algebraic isolation of the unknown angle accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou evaluated while your calculator was set to radian mode instead of degree mode.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisGeometric optics problems provide angles measured in degrees relative to the normal line. When using a calculator to evaluate trigonometric functions or inverse trigonometric functions, the angle measurement unit mode must match the given unit.
REASONING PATH
Your ACEpath teacher’s suggested approach- Calculator Angle Mode Check
Before computing any trigonometric function for an angle given in degrees (), ensure the calculator displays DEG, not RAD.
Always perform a quick calibration test like if you are unsure of the active calculator mode.
- Unit Consistency in Optics
Snell's Law angles are standardly expressed in degrees unless radians are explicitly requested.
Report the final incident and refracted angles in degrees to match the problem statement.
CORRECTED PATH
ACEpath Teacher's DemonstrationEvaluate in degree mode: .
Substitute into Snell's Law: .
Take the inverse sine in degree mode: .
03 The student sets up Snell's Law directly with angles rather than the sines of the angles, incorrectly assuming n₁ θ₁ = n₂ θ₂.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You omitted the trigonometric sine function from Snell's Law. Refraction depends on the ratio of wave speeds and geometric wave fronts, which requires . The linear form is only a small-angle approximation (for ) and does not apply to a large angle like .
- Step 2Correct
Your algebraic division and arithmetic were carried out cleanly, but because the governing equation was missing the sine function, your calculated angle was propagated from the initial formula error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly assigned to the flint glass and to the liquid.
You isolated the unknown angle correctly using valid algebraic division.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated the relationship between angles of refraction as directly linear () rather than trigonometric.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating Snell's exact law of refraction with a paraxial or small-angle approximation, forgetting that boundary conditions on electromagnetic wave phases require matching the parallel components of wave vectors, yielding sine functions.
REASONING PATH
Your ACEpath teacher’s suggested approach- Snell's Law Formula Check
Always write out the sine of each angle before substituting numerical values.
- Applicability of Small-Angle Approximations
is valid only when is small (typically or ) and expressed in radians.
Check if the given angles exceed ; if they do, you must evaluate the full trigonometric sine.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite Snell's Law with sines:
Substitute the values:
Evaluate the right-hand side:
Solve for :
Compute the inverse sine:
Lock it in
In Snell's Law (), how do you decide which medium gets index ?
always belongs to the medium where the incident light beam originates before crossing the boundary.
Similar question
A light ray travels from diamond () into crown glass (). The angle of refraction in the crown glass is . Find the angle of incidence in the diamond.
Answer
. Key steps: .
A diver shines an underwater flashlight up toward the air-water surface (, ). The beam emerges into the air at an angle of to the normal. Determine the angle of incidence in the water.
Answer
. Key steps: Identify incident medium and refracted medium . Then .
A light ray passes through a three-layer optical sandwich: from sapphire () into an unknown oil layer (), and then into air (). The ray exits into air at relative to the normal. Assuming all interfaces are parallel, determine the initial angle of incidence inside the sapphire.
Answer
. Key steps: For parallel planar interfaces, Snell's Law applies across endpoints: . Therefore, .