Resources
A precision flywheel in a micro-electromechanical gyroscope is shaped as a thin uniform disk with diameter and surface mass density . Before calculating the moment of inertia about its central axis of symmetry, convert all given quantities into standard SI base units (meters, kilograms, and ). Then, calculate: (a) the total mass of the disk in grams, and (b) the moment of inertia in standard SI units () expressed in scientific notation.
Answer and steps
Final answer
(a) ; (b)
Steps
Convert all given quantities to SI base units
The given parameters are:
- Diameter:
- Surface mass density:
Convert the diameter and radius to meters ():
Convert the surface mass density to kilograms per square meter (): Since and ,
Calculate the total mass of the disk
The total area of the circular disk is:
Multiply the surface mass density by the area to find the total mass :
Expressing in grams () to three significant figures:
Calculate the moment of inertia
The moment of inertia of a uniform thin disk rotating about its central perpendicular axis is given by:
Substitute the mass and radius in SI base units:
Common Pitfall: Be careful not to use the diameter in place of the radius in . Additionally, always square the unit conversion factor when converting areas (e.g., , not ).
Typical errors
01 The student uses the diameter instead of the radius in the area and moment of inertia formulas.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You used the area formula instead of . Because you used the diameter directly without dividing by , your calculated area and mass are four times too large.
- Step 3Correct
You wrote instead of . Combining this formula error with the inflated mass value caused the final moment of inertia to be sixteen times larger than the correct value.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the diameter from millimeters to meters.
You handled the two-part unit conversion for surface mass density accurately from to .
You correctly recognized that total mass equals surface mass density multiplied by surface area ().
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the full diameter wherever the radius belonged in geometric and rotational formulas.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated geometric formulas that require the radial distance from the central axis as if they took the full diameter directly, forgetting to compute before applying area and rotational inertia formulas.
REASONING PATH
Your ACEpath teacher’s suggested approach- Always calculate radius first
Whenever a problem specifies diameter , immediately compute before writing down geometric or rotational formulas.
Write right under your given values so you do not accidentally pick up later.
- Verify formula variables against physical meaning
Moment of inertia measures mass distribution relative to the axis of rotation, so represents the outer radius (distance from center to edge), not the total span .
Check that your rotational formula is , and if using diameter, remember , making .
CORRECTED PATH
ACEpath Teacher's DemonstrationFind the radius: .
Calculate the area: .
Compute the total mass: .
Calculate the moment of inertia: .
(a) ; (b)
02 The student misconverts the area unit from cm² to m² by dividing by 100 instead of 10,000.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You correctly found the radius and converted milligrams to kilograms (). However, because , the area conversion requires squaring the linear factor: . Using in the denominator understated by a factor of .
- Step 2
- Step 3Correct
Your formula and arithmetic execution are fully correct based on your previous step, but the numerical mass is times too small due to the converted density value.
- Step 4Correct
Your application of the moment of inertia formula is algebraically sound, but the final answer inherits the two-order-of-magnitude error from the mass.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly divided the diameter by to find the radius in meters.
You converted the numerator unit from milligrams to kilograms accurately.
You applied the correct geometric formula for the area of a circle.
You correctly chose and evaluated the rotational inertia formula for a thin uniform disk.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisWhen converting a derived unit involving an area (such as ), the linear prefix conversion factor was not squared, resulting in instead of .
REASONING PATH
Your ACEpath teacher’s suggested approach- Square the Prefix for Area Units
Write out the unit in parentheses with its linear conversion before distributing the exponent to both the number and the unit.
- Denominator Division Check
Dividing by in the denominator is equivalent to multiplying by in the numerator.
Check that converting a surface density from to yields a larger numerical value, because one square meter contains square centimeters.
CORRECTED PATH
ACEpath Teacher's Demonstration(a) ; (b)
03 The student forgets to convert the mass from grams to kilograms when evaluating the moment of inertia in SI units.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You substituted the numerical value of the mass in grams () instead of the SI base unit of kilograms (). Because , your calculated moment of inertia was times larger than the correct value.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the radius to meters and the surface density to .
You correctly calculated the area of the disk and found the total mass in kilograms and grams.
You selected the correct geometric formula for a uniform solid disk.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou used the mass value in grams () instead of the SI base unit value in kilograms () when evaluating the formula for moment of inertia, even though the desired output was in standard SI units ().
REASONING PATH
Your ACEpath teacher’s suggested approach- SI Base Unit Consistency
Every derived mechanical quantity in SI units (such as , , or ) strictly requires mass to be expressed in kilograms (), length in meters (), and time in seconds ().
Always verify that every numerical value substituted into a formula carries the fundamental SI base unit before computing.
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute the mass in kilograms () and radius in meters () into :
Round to three significant figures in scientific notation.
Lock it in
What is the relationship between the radius and diameter of a circle, and how does circular area relate to both?
. The area is . Writing overestimates the area by a factor of .
Similar question
A uniform thin coin has a diameter of and a total mass of . Calculate its moment of inertia about its central axis perpendicular to the face in standard SI units ().
Answer
. Convert mass: . Then .
A circular silicon wafer has diameter and uniform surface mass density . Determine: (a) the radius in meters, (b) the mass in kilograms, and (c) the moment of inertia about its central perpendicular axis in .
Answer
(a) . (b) . Area , so . (c) .
A micro-turbine rotor consists of a central uniform disk of diameter and an outer concentric thin ring of outer diameter . If the central disk has a mass of , find the moment of inertia of just the central disk about its central axis in , and state by what factor the calculated moment of inertia would be in error if someone mistakenly used instead of in both the mass and inertia steps.
Answer
; . Disk inertia: . If is used instead of , the area (and thus mass from ) is scaled by , and in is replaced by , creating an overall error factor of times too large.