Resources

A small metallic bob of mass m=0.250 kgm = 0.250\text{ kg} carrying an electrostatic charge q=+4.20×10−6 Cq = +4.20\times 10^{-6}\text{ C} is suspended by an insulating thread of negligible mass between two vertical, parallel conducting plates. The plates establish a uniform horizontal electric field E⃗\vec{E} pointing horizontally to the right. When released, the bob reaches a static equilibrium where the thread makes an angle θ\theta with the vertical. The two external forces acting on the bob are the electric force and the gravitational force (g=9.80 m/s2g = 9.80\text{ m/s}^2), balanced by the thread tension. (a) Classify the electrostatic force, gravitational force, and tension force as contact or non-contact forces. (b) Given that the electric field magnitude is E=3.50×105 N/CE = 3.50\times 10^5\text{ N/C}, determine the equilibrium deflection angle θ\theta of the thread.

Answer and steps

Final answer

(a) Electrostatic force: non-contact force; Gravitational force: non-contact force; Tension force: contact force; (b) θ=31.0∘\theta = 31.0^\circ

Steps

01

Calculate the magnitudes of the forces

Part (a): Classifying the Forces

Forces can be classified based on whether physical contact between objects is necessary to exert the force:

  1. Contact forces arise from the direct mechanical interaction between physical surfaces or bodies touching each other.
    • Tension force (T⃗\vec{T}): The insulating thread is physically tied to and pulling on the bob. Therefore, tension is a contact force.
  2. Non-contact forces (field forces) act over a distance without requiring physical touch, mediated by fields.
    • Gravitational force (mg⃗m\vec{g}): Arises from the gravitational interaction between the Earth and the bob across empty space. Therefore, gravity is a non-contact force.
    • Electrostatic force (F⃗e\vec{F}_e): Exerted on the charged bob by the ambient electric field established between the plates without physical contact. Therefore, the electrostatic force is a non-contact force.

Part (b): Finding the Deflection Angle θ\theta

  • Gravitational force acting downward: Fg=mg=(0.250 kg)(9.80 m/s2)=2.45 NF_g = mg = (0.250\text{ kg})(9.80\text{ m/s}^2) = 2.45\text{ N}
  • Electrostatic force acting horizontally to the right: Fe=qE=(4.20×10−6 C)(3.50×105 N/C)=1.47 NF_e = qE = (4.20\times 10^{-6}\text{ C})(3.50\times 10^5\text{ N/C}) = 1.47\text{ N}
02

Apply the conditions for static equilibrium

The bob is in static equilibrium under three forces: the upward-left tension force T⃗\vec{T}, the downward gravitational force F⃗g\vec{F}_g, and the rightward electrostatic force F⃗e\vec{F}_e.

Resolving the tension T⃗\vec{T} into components, where θ\theta is measured relative to the vertical:

  • Vertical component: Ty=Tcos⁡θT_y = T\cos\theta
  • Horizontal component: Tx=Tsin⁡θT_x = T\sin\theta

Since the bob is stationary, the net force in both directions must be zero: ∑Fx=0  ⟹  Tsin⁡θ=Fe\sum F_x = 0 \implies T\sin\theta = F_e ∑Fy=0  ⟹  Tcos⁡θ=mg\sum F_y = 0 \implies T\cos\theta = mg

03

Solve for θ\theta

Dividing the horizontal equilibrium equation by the vertical equilibrium equation eliminates the unknown tension TT: tan⁡θ=Tsin⁡θTcos⁡θ=Femg\tan\theta = \frac{T\sin\theta}{T\cos\theta} = \frac{F_e}{mg}

Substitute the values: tan⁡θ=1.47 N2.45 N=0.600\tan\theta = \frac{1.47\text{ N}}{2.45\text{ N}} = 0.600

Taking the inverse tangent: θ=arctan⁡(0.600)≈31.0∘\theta = \arctan(0.600) \approx 31.0^\circ

Common Pitfall: Always verify whether the angle θ\theta is defined relative to the vertical or horizontal. If θ\theta is measured with respect to the vertical, the horizontal component of tension involves sin⁡θ\sin\theta and the vertical component involves cos⁡θ\cos\theta, leading to tan⁡θ=Femg\tan\theta = \frac{F_e}{mg}. Measuring with respect to the horizontal would invert this ratio.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student inverts the trigonometric components of tension with respect to the vertical angle θ, equating tan θ to mg / (qE) instead of qE / (mg).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Electrostatic force: non-contact force Gravitational force: non-contact force Tension force: contact force

  2. Step 2

    Tcos⁡θ=Fe=qET\cos\theta = F_e = qE ⟹ Tsin⁡θ=Fg=mgT\sin\theta = F_g = mg

    Correct

    Tsin⁡θ=Fe=qET\sin\theta = F_e = qE and Tcos⁡θ=Fg=mgT\cos\theta = F_g = mg

    Because the deflection angle θ\theta is defined with respect to the vertical, the vertical component adjacent to θ\theta is Tcos⁡θT\cos\theta and the horizontal component opposite θ\theta is Tsin⁡θT\sin\theta. You swapped the sine and cosine assignments.

  3. Step 3

    tan⁡θ=mgqE\tan\theta = \frac{mg}{qE} ⟹ tan⁡θ=2.451.47=1.667\tan\theta = \frac{2.45}{1.47} = 1.667

    Correct

    tan⁡θ=Femg=1.47 N2.45 N=0.600\tan\theta = \frac{F_e}{mg} = \frac{1.47\text{ N}}{2.45\text{ N}} = 0.600

    You correctly computed the ratio from your component setup, but the fraction was inverted due to the swapped components in the previous step.

  4. Step 4

    θ=59.0∘\theta = 59.0^\circ

    Correct

    θ=arctan⁡(0.600)≈31.0∘\theta = \arctan(0.600) \approx 31.0^\circ

    Your final calculation evaluated arctan⁡(1.667)≈59.0∘\arctan(1.667) \approx 59.0^\circ, which represents the angle with the horizontal rather than the requested angle with the vertical.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly distinguished between contact and non-contact forces.

You calculated the magnitudes of both the gravitational force and electrostatic force accurately.

You recognized that dividing the two equilibrium equations eliminates the tension force TT.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Inversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assigned cos⁡θ\cos\theta to the horizontal axis and sin⁡θ\sin\theta to the vertical axis by default, rather than referencing the geometry of the angle θ\theta measured from the vertical line.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Axis for Angles
  • If an angle θ\theta is measured from the vertical line, the adjacent (vertical) side is proportional to cos⁡θ\cos\theta, and the opposite (horizontal) side is proportional to sin⁡θ\sin\theta.

  • Always draw a small right triangle along the tension vector to identify which side is adjacent and which side is opposite to θ\theta before writing equilibrium equations.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Resolve tension into vertical and horizontal components relative to the vertical line: Ty=Tcos⁡θT_y = T\cos\theta and Tx=Tsin⁡θT_x = T\sin\theta.

  2. Equate the components to balance external forces: Tsin⁡θ=Fe=1.47 NT\sin\theta = F_e = 1.47\text{ N} and Tcos⁡θ=mg=2.45 NT\cos\theta = mg = 2.45\text{ N}.

  3. Divide the horizontal equation by the vertical equation: tan⁡θ=Tsin⁡θTcos⁡θ=1.47 N2.45 N=0.600\tan\theta = \frac{T\sin\theta}{T\cos\theta} = \frac{1.47\text{ N}}{2.45\text{ N}} = 0.600.

Final answer

θ=31.0∘\theta = 31.0^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the right triangle formed by the vector components and mark the angle θ\theta explicitly before resolving forces.

  • Verify your final angle using a physical sanity check: since Fe<FgF_e < F_g (1.47 N<2.45 N1.47\text{ N} < 2.45\text{ N}), the deflection from the vertical must be less than 45∘45^\circ.

OverviewACEpath Teacher's Diagnosis

02 A student mistakenly uses the electric field strength directly in place of the electric force without multiplying by charge q.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Electrostatic force: non-contact force Gravitational force: non-contact force Tension force: contact force

  2. Step 2

    mg=0.250×9.80=2.45 Nmg = 0.250 \times 9.80 = 2.45\text{ N}

  3. Step 3

    tan⁡θ=Emg\tan\theta = \frac{E}{mg}

    Correct

    tan⁡θ=Femg=qEmg\tan\theta = \frac{F_e}{mg} = \frac{qE}{mg}

    The horizontal force acting on the charge is the electric force Fe=qEF_e = qE, not the electric field EE alone. Electric field has units of N/C\text{N/C}, which cannot balance a force in newtons directly.

  4. Step 4

    tan⁡θ=3.50×1052.45=1.43×105  ⟹  θ≈90.0∘\tan\theta = \frac{3.50\times 10^5}{2.45} = 1.43\times 10^5 \implies \theta \approx 90.0^\circ

    Correct

    tan⁡θ=1.47 N2.45 N=0.600  ⟹  θ=arctan⁡(0.600)≈31.0∘\tan\theta = \frac{1.47\text{ N}}{2.45\text{ N}} = 0.600 \implies \theta = \arctan(0.600) \approx 31.0^\circ

    Because EE was used instead of qEqE, your resulting tangent ratio was extremely large, incorrectly leading to an angle near 90∘90^\circ.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly distinguished between contact and non-contact forces for all three interactions.

You correctly computed the weight of the bob using W=mgW = mg.

You correctly recognized that the tangent of the angle relates the horizontal and vertical forces.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Electric field vs. electric force confusion

You substituted the electric field intensity EE directly into the force balance equation instead of the electric force Fe=qEF_e = qE.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a field property (EE, force per unit charge) with the actual force experienced by a specific object (F=qEF = qE), which leads to dimensionally inconsistent force equations.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Dimensional Consistency
  • Every term in a force balance equation must have units of newtons (N\text{N}).

  • Multiply electric field EE (in N/C\text{N/C}) by charge qq (in C\text{C}) to get the force Fe=qEF_e = qE in newtons before balancing forces.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the electric force: Fe=qE=(4.20×10−6 C)(3.50×105 N/C)=1.47 NF_e = qE = (4.20\times 10^{-6}\text{ C})(3.50\times 10^5\text{ N/C}) = 1.47\text{ N}.

  2. Set up the equilibrium ratio: tan⁡θ=Femg=1.47 N2.45 N=0.600\tan\theta = \frac{F_e}{mg} = \frac{1.47\text{ N}}{2.45\text{ N}} = 0.600.

  3. Solve for the angle: θ=arctan⁡(0.600)≈31.0∘\theta = \arctan(0.600) \approx 31.0^\circ.

Final answer

θ≈31.0∘\theta \approx 31.0^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between field strength E⃗\vec{E} and electric force F⃗e=qE⃗\vec{F}_e = q\vec{E}.

  • Always perform a quick units check: electric field N/C\text{N/C} cannot be divided by weight N\text{N} to yield a dimensionless ratio.

OverviewACEpath Teacher's Diagnosis

03 A student misclassifies the electrostatic force as a contact force because the charged bob is in physical contact with the charged plates' field or conductors.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Electrostatic force: contact force ⟹\Longrightarrow Gravitational force: non-contact force ⟹\Longrightarrow Tension force: contact force

    Correct

    Electrostatic force: non-contact force; Gravitational force: non-contact force; Tension force: contact force

    You correctly classified the gravitational force as non-contact and the thread tension as contact. However, the electrostatic force is exerted by the ambient electric field across empty space without physical touch between the plates and the bob, making it a non-contact force.

  2. Step 2

    Fe=qE=4.20×10−6×3.50×105=1.47 N⟹Fg=mg=0.250×9.80=2.45 NF_e = qE = 4.20 \times 10^{-6} \times 3.50 \times 10^5 = 1.47\text{ N} \Longrightarrow F_g = mg = 0.250 \times 9.80 = 2.45\text{ N}

  3. Step 3

    tan⁡θ=FeFg=1.472.45=0.600⟹θ=31.0∘\tan\theta = \frac{F_e}{F_g} = \frac{1.47}{2.45} = 0.600 \Longrightarrow \theta = 31.0^\circ

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified the tension in the thread as a contact force and gravity as a non-contact force.

You calculated both the electrostatic force (Fe=1.47 NF_e = 1.47\text{ N}) and the gravitational force (Fg=2.45 NF_g = 2.45\text{ N}) accurately.

You correctly set up the equilibrium ratio tan⁡θ=FeFg\tan\theta = \frac{F_e}{F_g} and found the exact deflection angle θ=31.0∘\theta = 31.0^\circ.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misclassifying field forces as contact forces

You may have thought that being immersed inside an electric field counts as physical surface contact.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing field immersion with physical mechanical contact. Contact forces require the direct touching of two physical surfaces or bodies (such as normal force, friction, or tension). Non-contact (fundamental/field) forces, such as gravity, electrostatics, and magnetism, act across space through fields without physical surfaces touching.

REASONING PATH
Your ACEpath teacher’s suggested approach
Physical Surface Criterion
  • A contact force requires direct touching between two macroscopic physical objects or surfaces.

  • Ask yourself: Is an object physically pressing, rubbing, or pulling on the body? If not, it is not a contact force.

Field Forces are Non-Contact
  • Gravitational, electrostatic, and magnetic interactions act over distance via force fields without physical touch.

  • Classify electric forces F⃗e=qE⃗\vec{F}_e = q\vec{E} and magnetic forces as non-contact forces, even when an object is suspended in the field region.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify whether physical surfaces touch: The insulating thread physically pulls on the bob, so tension is a contact force.

  2. Identify whether the force acts across space via a field: The Earth pulls the bob downward across distance, so gravity is a non-contact force.

  3. Examine the electrostatic interaction: The charged plates generate an electric field that exerts F⃗e=qE⃗\vec{F}_e = q\vec{E} on the bob across empty space without touching it, so the electrostatic force is a non-contact force.

Final answer

Electrostatic force: non-contact force; Gravitational force: non-contact force; Tension force: contact force

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between mechanical contact forces (tension, normal, friction) and field forces (gravitational, electric, magnetic).

  • Practice identifying the interaction agent for each force in a free-body diagram to verify whether physical touching occurs.

Lock it in

Similar question

01

A small suspended sphere of mass m=0.100 kgm = 0.100\text{ kg} is pulled horizontally by an electrostatic force Fe=0.500 NF_e = 0.500\text{ N}. If the suspension thread makes an angle θ\theta with the vertical in static equilibrium, calculate θ\theta (use g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

θ=27.0∘\theta = 27.0^\circ. Key steps: Tsin⁡θ=Fe=0.500 NT\sin\theta = F_e = 0.500\text{ N}, Tcos⁡θ=mg=0.980 NT\cos\theta = mg = 0.980\text{ N}. tan⁡θ=0.5000.980≈0.5102  ⟹  θ=arctan⁡(0.5102)≈27.0∘\tan\theta = \frac{0.500}{0.980} \approx 0.5102 \implies \theta = \arctan(0.5102) \approx 27.0^\circ.

02

A charged sphere hanging from a ceiling by an insulating string of length LL is deflected by an electric field. The string makes an angle ϕ=40.0∘\phi = 40.0^\circ with the horizontal ceiling. Express the ratio of the horizontal electric force to the vertical gravitational force, Femg\frac{F_e}{mg}, in terms of ϕ\phi, and find its numerical value.

Answer

Femg=1tan⁡40.0∘=cot⁡40.0∘≈1.19\frac{F_e}{mg} = \frac{1}{\tan 40.0^\circ} = \cot 40.0^\circ \approx 1.19. Key steps: Since ϕ\phi is measured from the horizontal, the horizontal component is Tcos⁡ϕ=FeT\cos\phi = F_e and the vertical component is Tsin⁡ϕ=mgT\sin\phi = mg. Dividing gives Femg=Tcos⁡ϕTsin⁡ϕ=cot⁡ϕ=1tan⁡40.0∘≈1.19\frac{F_e}{mg} = \frac{T\cos\phi}{T\sin\phi} = \cot\phi = \frac{1}{\tan 40.0^\circ} \approx 1.19.

03

A metallic bob of mass m=0.400 kgm = 0.400\text{ kg} hangs in equilibrium between two plates inclined at 30.0∘30.0^\circ to the vertical. An electric field perpendicular to the plates exerts a force Fe=2.00 NF_e = 2.00\text{ N} directed upward and to the right at an angle of 30.0∘30.0^\circ above the horizontal. Write the vertical and horizontal force equilibrium equations for the bob if the thread makes an angle θ\theta with the vertical.

Answer

Horizontal: Tsin⁡θ=Fecos⁡(30.0∘)T\sin\theta = F_e\cos(30.0^\circ); Vertical: Tcos⁡θ+Fesin⁡(30.0∘)=mgT\cos\theta + F_e\sin(30.0^\circ) = mg. Key steps: The thread tension components relative to the vertical are Tx=Tsin⁡θT_x = T\sin\theta (leftward) and Ty=Tcos⁡θT_y = T\cos\theta (upward). The electric force has components Fe,x=Fecos⁡(30.0∘)F_{e,x} = F_e\cos(30.0^\circ) (rightward) and Fe,y=Fesin⁡(30.0∘)F_{e,y} = F_e\sin(30.0^\circ) (upward). Gravity acts strictly downward (mgmg).

Loading workspace…