Resources

The volumetric expansion of pure water near freezing exhibits an anomalous non-linear behavior described empirically by the density function ρ(T)=ρmax[1−q(T−Tmax)2]\rho(T) = \rho_{\text{max}} [1 - q (T - T_{\text{max}})^2], where ρmax=1000.00 kg/m3\rho_{\text{max}} = 1000.00\text{ kg/m}^3, Tmax=3.98∘CT_{\text{max}} = 3.98^\circ\text{C}, and q=8.00×10−6 (∘C)−2q = 8.00 \times 10^{-6}\text{ }(^\circ\text{C})^{-2}. (a) Using the differential thermodynamic definition of the volumetric thermal expansion coefficient β(T)=−1ρdρdT\beta(T) = -\frac{1}{\rho}\frac{d\rho}{dT}, derive an expression for β(T)\beta(T) and evaluate the asymptotic limit lim⁡T→Tmaxβ(T)\lim_{T \to T_{\text{max}}} \beta(T). (b) For a closed sample of V=1.0000 LV = 1.0000\text{ L} of water cooled from T=3.98∘CT = 3.98^\circ\text{C} to T=0.50∘CT = 0.50^\circ\text{C} under atmospheric pressure, determine whether the volume expands or contracts, and compute the net change in volume ΔV\Delta V in milliliters (mL\text{mL}).

Answer and steps

Final answer

(a) β(T)=2q(T−Tmax)1−q(T−Tmax)2\beta(T) = \frac{2q(T - T_{\text{max}})}{1 - q(T - T_{\text{max}})^2}; lim⁡T→3.98∘Cβ(T)=0 ∘C−1\lim_{T \to 3.98^\circ\text{C}} \beta(T) = 0\text{ }^\circ\text{C}^{-1}; (b) The water expands (negative β\beta below 3.98∘C3.98^\circ\text{C}); ΔV=+0.0969 mL\Delta V = +0.0969\text{ mL}

Steps

Part (a): Derivation of the Volumetric Expansion Coefficient β(T)\beta(T)

The volumetric thermal expansion coefficient at constant pressure is related to density by: β(T)=−1ρdρdT\beta(T) = -\frac{1}{\rho}\frac{d\rho}{dT}

This relation arises directly from the definition β=1VdVdT\beta = \frac{1}{V}\frac{dV}{dT} for a fixed mass mm, where V=mρV = \frac{m}{\rho}. Differentiating with respect to TT gives dVdT=−mρ2dρdT=−VρdρdT\frac{dV}{dT} = -\frac{m}{\rho^2}\frac{d\rho}{dT} = -\frac{V}{\rho}\frac{d\rho}{dT}, which yields the density form upon dividing by VV.

Given the empirical density function: ρ(T)=ρmax[1−q(T−Tmax)2]\rho(T) = \rho_{\text{max}} [1 - q(T - T_{\text{max}})^2]

  1. Differentiate ρ(T)\rho(T) with respect to TT: dρdT=ρmax⋅ddT[1−q(T−Tmax)2]=−2qρmax(T−Tmax)\frac{d\rho}{dT} = \rho_{\text{max}} \cdot \frac{d}{dT}\left[1 - q(T - T_{\text{max}})^2\right] = -2q\rho_{\text{max}}(T - T_{\text{max}})
  2. Substitute into the expression for β(T)\beta(T): β(T)=−1ρmax[1−q(T−Tmax)2]⋅[−2qρmax(T−Tmax)]\beta(T) = -\frac{1}{\rho_{\text{max}}[1 - q(T - T_{\text{max}})^2]} \cdot \left[-2q\rho_{\text{max}}(T - T_{\text{max}})\right]

    Canceling ρmax\rho_{\text{max}} from the numerator and denominator: β(T)=2q(T−Tmax)1−q(T−Tmax)2\beta(T) = \frac{2q(T - T_{\text{max}})}{1 - q(T - T_{\text{max}})^2}

  3. Evaluate the asymptotic limit as T→TmaxT \to T_{\text{max}}: lim⁡T→Tmaxβ(T)=2q(0)1−q(0)2=0 ∘C−1\lim_{T \to T_{\text{max}}} \beta(T) = \frac{2q(0)}{1 - q(0)^2} = 0\text{ }^\circ\text{C}^{-1}

    At Tmax=3.98∘CT_{\text{max}} = 3.98^\circ\text{C}, the density reaches a maximum, meaning the slope dρdT=0\frac{d\rho}{dT} = 0, and consequently β(3.98∘C)=0 ∘C−1\beta(3.98^\circ\text{C}) = 0\text{ }^\circ\text{C}^{-1}.


Part (b): Volume Change upon Cooling

  1. Direction of Volume Change (Expansion vs. Contraction):

    • For T<Tmax=3.98∘CT < T_{\text{max}} = 3.98^\circ\text{C}, the factor (T−Tmax)(T - T_{\text{max}}) is negative, making β(T)<0\beta(T) < 0.
    • A negative expansion coefficient means that cooling (dT<0dT < 0) causes a positive volume change (dV>0dV > 0).
    • Equivalently, since density is maximal at 3.98∘C3.98^\circ\text{C}, cooling to any temperature below 3.98∘C3.98^\circ\text{C} reduces the density (ρf<ρi\rho_f < \rho_i). For a fixed mass mm, volume V=mρV = \frac{m}{\rho} must increase. Therefore, the water expands.
  2. Calculate the Final Density and Volume:

    • Initial temperature: Ti=3.98∘C=TmaxT_i = 3.98^\circ\text{C} = T_{\text{max}}
    • Final temperature: Tf=0.50∘CT_f = 0.50^\circ\text{C}
    • Temperature deviation: ΔT=Tf−Tmax=0.50∘C−3.98∘C=−3.48∘C\Delta T = T_f - T_{\text{max}} = 0.50^\circ\text{C} - 3.98^\circ\text{C} = -3.48^\circ\text{C}

    Evaluate q(ΔT)2q(\Delta T)^2: q(ΔT)2=(8.00×10−6 ∘C−2)⋅(−3.48∘C)2=(8.00×10−6)⋅(12.1104)≈9.6883×10−5q(\Delta T)^2 = (8.00 \times 10^{-6}\text{ }^\circ\text{C}^{-2}) \cdot (-3.48^\circ\text{C})^2 = (8.00 \times 10^{-6}) \cdot (12.1104) \approx 9.6883 \times 10^{-5}

    Since the mass m=ρiVi=ρfVfm = \rho_i V_i = \rho_f V_f is conserved: Vf=Viρiρf=Viρmaxρmax[1−q(ΔT)2]=Vi1−q(ΔT)2V_f = V_i \frac{\rho_i}{\rho_f} = V_i \frac{\rho_{\text{max}}}{\rho_{\text{max}}[1 - q(\Delta T)^2]} = \frac{V_i}{1 - q(\Delta T)^2}

  3. Calculate the Net Change in Volume ΔV\Delta V: ΔV=Vf−Vi=Vi[11−q(ΔT)2−1]=Vi[q(ΔT)21−q(ΔT)2]\Delta V = V_f - V_i = V_i \left[ \frac{1}{1 - q(\Delta T)^2} - 1 \right] = V_i \left[ \frac{q(\Delta T)^2}{1 - q(\Delta T)^2} \right]

    Given Vi=1.0000 L=1000.0 mLV_i = 1.0000\text{ L} = 1000.0\text{ mL}: ΔV=1000.0 mL×9.6883×10−51−9.6883×10−5≈1000.0×9.6892×10−5 mL≈+0.0969 mL\Delta V = 1000.0\text{ mL} \times \frac{9.6883 \times 10^{-5}}{1 - 9.6883 \times 10^{-5}} \approx 1000.0 \times 9.6892 \times 10^{-5}\text{ mL} \approx +0.0969\text{ mL}

    The net change in volume is +0.0969 mL+0.0969\text{ mL}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets the negative sign in the thermodynamic definition of the volumetric thermal expansion coefficient β(T), leading to an inverted sign in the expression.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    dρdT=−2qρmax(T−Tmax)\frac{d\rho}{dT} = -2q\rho_{\text{max}}(T - T_{\text{max}})

  2. Step 2

    β(T)=1ρdρdT  ⟹  β(T)=−2q(T−Tmax)1−q(T−Tmax)2\beta(T) = \frac{1}{\rho} \frac{d\rho}{dT} \implies \beta(T) = \frac{-2q(T - T_{\text{max}})}{1 - q(T - T_{\text{max}})^2}

    Correct

    β(T)=−1ρdρdT  ⟹  β(T)=2q(T−Tmax)1−q(T−Tmax)2\beta(T) = -\frac{1}{\rho} \frac{d\rho}{dT} \implies \beta(T) = \frac{2q(T - T_{\text{max}})}{1 - q(T - T_{\text{max}})^2}

    You omitted the negative sign from the definition β=−1ρdρdT\beta = -\frac{1}{\rho}\frac{d\rho}{dT}. Because V=m/ρV = m/\rho, an increase in volume corresponds to a decrease in density, requiring a negative sign so that β=1VdVdT=−1ρdρdT\beta = \frac{1}{V}\frac{dV}{dT} = -\frac{1}{\rho}\frac{d\rho}{dT}.

  3. Step 3

    lim⁡T→Tmaxβ(T)=0\lim_{T \to T_{\text{max}}} \beta(T) = 0

  4. Step 4

    m=ρmax⋅Vinitial=1000.00 kg/m3×0.001 m3=1.0000 kg  ⟹  ΔT=0.50−3.98=−3.48∘C  ⟹  ρ(0.50)=1000.00×[1−(8.00×10−6)(−3.48)2]=999.903 kg/m3  ⟹  Since ρ decreases, the volume expands.m = \rho_{\text{max}} \cdot V_{\text{initial}} = 1000.00\text{ kg/m}^3 \times 0.001\text{ m}^3 = 1.0000\text{ kg} \implies \Delta T = 0.50 - 3.98 = -3.48^\circ\text{C} \implies \rho(0.50) = 1000.00 \times [1 - (8.00 \times 10^{-6})(-3.48)^2] = 999.903\text{ kg/m}^3 \implies \text{Since } \rho \text{ decreases, the volume expands.}

  5. Step 5

    Vfinal=1.0000999.903=0.001000097 m3=1000.097 mL  ⟹  ΔV=1000.097−1000.000=0.097 mLV_{\text{final}} = \frac{1.0000}{999.903} = 0.001000097\text{ m}^3 = 1000.097\text{ mL} \implies \Delta V = 1000.097 - 1000.000 = 0.097\text{ mL}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the first derivative dρdT\frac{d\rho}{dT} using the chain rule.

You correctly determined that lim⁡T→Tmaxβ(T)=0\lim_{T \to T_{\text{max}}} \beta(T) = 0.

You evaluated the density at 0.50∘C0.50^\circ\text{C} and correctly concluded that water expands upon cooling below 3.98∘C3.98^\circ\text{C}.

You correctly calculated the net volume change ΔV\Delta V using mass conservation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Negative Sign in Definition

You wrote β(T)=1ρdρdT\beta(T) = \frac{1}{\rho}\frac{d\rho}{dT} instead of β(T)=−1ρdρdT\beta(T) = -\frac{1}{\rho}\frac{d\rho}{dT}, which inverted the algebraic sign of β(T)\beta(T).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the volume definition β=1VdVdT\beta = \frac{1}{V}\frac{dV}{dT} with the density definition β=−1ρdρdT\beta = -\frac{1}{\rho}\frac{d\rho}{dT}, forgetting that volume and density are inversely proportional (V∝ρ−1V \propto \rho^{-1}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Inverse Proportionality Sign Check
  • Since V=mρ−1V = m\rho^{-1}, differentiating gives dVdT=−mρ−2dρdT=−VρdρdT\frac{dV}{dT} = -m\rho^{-2}\frac{d\rho}{dT} = -\frac{V}{\rho}\frac{d\rho}{dT}.

  • Always verify that the density formulation includes the minus sign: β=−1ρdρdT\beta = -\frac{1}{\rho}\frac{d\rho}{dT}.

Physical Sign Consistency
  • For a normal material that expands on heating (dV/dT>0dV/dT > 0), density decreases (dρ/dT<0d\rho/dT < 0). Thus β\beta must be positive.

  • Check your formula: when T>TmaxT > T_{\text{max}}, density decreases with increasing TT, so β(T)\beta(T) must evaluate to a positive number.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the full thermodynamic definition: β(T)=−1ρdρdT\beta(T) = -\frac{1}{\rho}\frac{d\rho}{dT}.

  2. Substitute ρ(T)=ρmax[1−q(T−Tmax)2]\rho(T) = \rho_{\text{max}}[1 - q(T - T_{\text{max}})^2] and dρdT=−2qρmax(T−Tmax)\frac{d\rho}{dT} = -2q\rho_{\text{max}}(T - T_{\text{max}}) into the definition: β(T)=−−2qρmax(T−Tmax)ρmax[1−q(T−Tmax)2]\beta(T) = -\frac{-2q\rho_{\text{max}}(T - T_{\text{max}})}{\rho_{\text{max}}[1 - q(T - T_{\text{max}})^2]}.

  3. Cancel ρmax\rho_{\text{max}} and resolve the double negative: β(T)=2q(T−Tmax)1−q(T−Tmax)2\beta(T) = \frac{2q(T - T_{\text{max}})}{1 - q(T - T_{\text{max}})^2}.

Final answer

(a) β(T)=2q(T−Tmax)1−q(T−Tmax)2\beta(T) = \frac{2q(T - T_{\text{max}})}{1 - q(T - T_{\text{max}})^2}; lim⁡T→3.98∘Cβ(T)=0 ∘C−1\lim_{T \to 3.98^\circ\text{C}} \beta(T) = 0\text{ }^\circ\text{C}^{-1}; (b) The water expands; ΔV=+0.0969 mL\Delta V = +0.0969\text{ mL}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how differentiating reciprocal quantities introduces a minus sign: ddT(1ρ)=−1ρ2dρdT\frac{d}{dT}\left(\frac{1}{\rho}\right) = -\frac{1}{\rho^2}\frac{d\rho}{dT}.

  • Practice checking the physical sign of β\beta for T>TmaxT > T_{\text{max}} to ensure it yields positive thermal expansion.

OverviewACEpath Teacher's Diagnosis

02 The student assumes that cooling always causes contraction and computes a negative volume change by treating V as directly proportional to density rather than inversely proportional.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    dρdT=−2qρmax(T−Tmax)  ⟹  β(T)=−1ρdρdT=2q(T−Tmax)1−q(T−Tmax)2  ⟹  lim⁡T→Tmaxβ(T)=0\frac{d\rho}{dT} = -2q\rho_{\text{max}}(T - T_{\text{max}}) \implies \beta(T) = -\frac{1}{\rho}\frac{d\rho}{dT} = \frac{2q(T - T_{\text{max}})}{1 - q(T - T_{\text{max}})^2} \implies \lim_{T \to T_{\text{max}}} \beta(T) = 0

  2. Step 2

    ΔT=0.50−3.98=−3.48∘C  ⟹  Δρρmax=−q(ΔT)2=−8.00×10−6×(−3.48)2=−9.69×10−5\Delta T = 0.50 - 3.98 = -3.48^\circ\text{C} \implies \frac{\Delta\rho}{\rho_{\text{max}}} = -q(\Delta T)^2 = -8.00 \times 10^{-6} \times (-3.48)^2 = -9.69 \times 10^{-5}

  3. Step 3

    ΔV=Vinitial⋅Δρρmax=1000.0 mL×(−9.69×10−5)=−0.097 mL  ⟹  The volume contracts.\Delta V = V_{\text{initial}} \cdot \frac{\Delta \rho}{\rho_{\text{max}}} = 1000.0\text{ mL} \times (-9.69 \times 10^{-5}) = -0.097\text{ mL} \implies \text{The volume contracts.}

    Correct

    ΔV=Vi(ρiρf−1)≈−ViΔρρmax≈+0.0969 mL  ⟹  The water expands.\Delta V = V_i\left(\frac{\rho_i}{\rho_f} - 1\right) \approx -V_i\frac{\Delta\rho}{\rho_{\text{max}}} \approx +0.0969\text{ mL} \implies \text{The water expands.}

    Because mass is conserved (m=ρVm = \rho V), volume is inversely proportional to density (V=m/ρV = m/\rho), giving dVV=−dρρ\frac{dV}{V} = -\frac{d\rho}{\rho}. A decrease in density means an increase in volume, so cooling water below 3.98∘C3.98^\circ\text{C} causes it to expand, yielding ΔV≈+0.0969 mL\Delta V \approx +0.0969\text{ mL}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied calculus to determine the differential volumetric expansion coefficient β(T)\beta(T).

You evaluated the limit at TmaxT_{\text{max}} accurately.

You correctly calculated the numerical density deviation Δρρmax\frac{\Delta\rho}{\rho_{\text{max}}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse Relationship Inversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the direct proportionality relation ΔVV=Δρρ\frac{\Delta V}{V} = \frac{\Delta \rho}{\rho} instead of the inverse relation ΔVV≈−Δρρ\frac{\Delta V}{V} \approx -\frac{\Delta \rho}{\rho} that results from mass conservation V=mρV = \frac{m}{\rho}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Mass Conservation and Volume-Density Relation
  • For a closed system of fixed mass mm, V=mρV = \frac{m}{\rho}. Taking logarithmic differentials gives dVV=−dρρ\frac{dV}{V} = -\frac{d\rho}{\rho}.

  • Always include the negative sign when relating fractional volume change to fractional density change: if density decreases, volume must increase.

Water's Density Anomaly
  • Liquid water reaches its maximum density at approximately 3.98∘C3.98^\circ\text{C}.

  • Remember that moving away from 3.98∘C3.98^\circ\text{C} in either direction (heating or cooling) lowers water's density and therefore causes a fixed mass of water to expand.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use mass conservation: m=ρmaxVi=ρfVfm = \rho_{\text{max}} V_i = \rho_f V_f, which gives Vf=Viρmaxρf=Vi1−q(ΔT)2V_f = V_i \frac{\rho_{\text{max}}}{\rho_f} = \frac{V_i}{1 - q(\Delta T)^2}.

  2. Express the change in volume: ΔV=Vf−Vi=Vi[11−q(ΔT)2−1]=Viq(ΔT)21−q(ΔT)2≈−ViΔρρmax\Delta V = V_f - V_i = V_i \left[\frac{1}{1 - q(\Delta T)^2} - 1\right] = V_i \frac{q(\Delta T)^2}{1 - q(\Delta T)^2} \approx -V_i \frac{\Delta \rho}{\rho_{\text{max}}}.

  3. Substitute Vi=1000.0 mLV_i = 1000.0\text{ mL} and Δρρmax=−9.688×10−5\frac{\Delta \rho}{\rho_{\text{max}}} = -9.688 \times 10^{-5}: ΔV≈−(1000.0 mL)(−9.688×10−5)=+0.0969 mL\Delta V \approx -(1000.0\text{ mL})(-9.688 \times 10^{-5}) = +0.0969\text{ mL}.

Final answer

The water expands, and ΔV=+0.0969 mL\Delta V = +0.0969\text{ mL}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the logarithmic differentiation of inverse product relations such as m=ρVm = \rho V.

  • Practice checking physical intuition against sign conventions for anomalous substances like water near 0∘C0^\circ\text{C}.

OverviewACEpath Teacher's Diagnosis

03 The student omits the denominator factor ρ in the expansion coefficient definition, confusing the relative expansion rate with the raw derivative.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    dρdT=−2qρmax(T−Tmax)\frac{d\rho}{dT} = -2q\rho_{\text{max}}(T - T_{\text{max}})

  2. Step 2

    β(T)=−dρdT=2qρmax(T−Tmax)\beta(T) = -\frac{d\rho}{dT} = 2q\rho_{\text{max}}(T - T_{\text{max}})

    Correct

    β(T)=−1ρdρdT=2q(T−Tmax)1−q(T−Tmax)2\beta(T) = -\frac{1}{\rho}\frac{d\rho}{dT} = \frac{2q(T - T_{\text{max}})}{1 - q(T - T_{\text{max}})^2}

    You omitted the factor of 1ρ\frac{1}{\rho} from the definition β(T)=−1ρdρdT\beta(T) = -\frac{1}{\rho}\frac{d\rho}{dT}. Thermal expansion coefficients are fractional or relative rates of change per degree, so the derivative must be divided by the density ρ\rho.

  3. Step 3

    lim⁡T→Tmaxβ(T)=0\lim_{T \to T_{\text{max}}} \beta(T) = 0

  4. Step 4

    m=ρmax⋅Vinitial=1.0000 kg  ⟹  ΔT=0.50−3.98=−3.48∘C  ⟹  ρfinal=1000.00×[1−(8.00×10−6)(−3.48)2]=999.903 kg/m3  ⟹  Because density decreases, the volume expands.  ⟹  Vfinal=1.0000 kg999.903 kg/m3=1000.097 mL  ⟹  ΔV=1000.097 mL−1000.000 mL=0.097 mLm = \rho_{\text{max}} \cdot V_{\text{initial}} = 1.0000\text{ kg} \implies \Delta T = 0.50 - 3.98 = -3.48^\circ\text{C} \implies \rho_{\text{final}} = 1000.00 \times [1 - (8.00 \times 10^{-6})(-3.48)^2] = 999.903\text{ kg/m}^3 \implies \text{Because density decreases, the volume expands.} \implies V_{\text{final}} = \frac{1.0000\text{ kg}}{999.903\text{ kg/m}^3} = 1000.097\text{ mL} \implies \Delta V = 1000.097\text{ mL} - 1000.000\text{ mL} = 0.097\text{ mL}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the derivative dρdT\frac{d\rho}{dT} using the power rule and chain rule.

You correctly concluded that the water expands because its density decreases as it cools below 3.98∘C3.98^\circ\text{C}.

You applied mass conservation accurately to find the final volume and net volume change ΔV\Delta V.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of normalization factor in relative coefficient definition

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the volumetric expansion coefficient β\beta as the raw slope −dρdT-\frac{d\rho}{dT} rather than the fractional rate −1ρdρdT-\frac{1}{\rho}\frac{d\rho}{dT}. Thermodynamic response coefficients (like β=1VdVdT\beta = \frac{1}{V}\frac{dV}{dT} or κ=−1VdVdP\kappa = -\frac{1}{V}\frac{dV}{dP}) are intensive, relative quantities normalized by the total volume or density.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify the intensive definition
  • Volumetric thermal expansion is defined as β=1V(∂V∂T)P=−1ρ(∂ρ∂T)P\beta = \frac{1}{V}\left(\frac{\partial V}{\partial T}\right)_P = -\frac{1}{\rho}\left(\frac{\partial \rho}{\partial T}\right)_P.

  • Always check that the definition includes division by the current volume VV or density ρ\rho to represent a fractional rate per degree.

Check dimensional consistency
  • The coefficient β\beta must have SI units of K−1\text{K}^{-1} or (∘C)−1(^\circ\text{C})^{-1}.

  • Perform a quick dimensional check: [−dρdT]=kg/m3∘C[-\frac{d\rho}{dT}] = \frac{\text{kg/m}^3}{^\circ\text{C}}, whereas dividing by ρ\rho cancels kg/m3\text{kg/m}^3, leaving the required (∘C)−1(^\circ\text{C})^{-1}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the full thermodynamic definition: β(T)=−1ρ(T)dρdT\beta(T) = -\frac{1}{\rho(T)}\frac{d\rho}{dT}.

  2. Substitute ρ(T)=ρmax[1−q(T−Tmax)2]\rho(T) = \rho_{\text{max}}[1 - q(T - T_{\text{max}})^2] and dρdT=−2qρmax(T−Tmax)\frac{d\rho}{dT} = -2q\rho_{\text{max}}(T - T_{\text{max}}).

  3. Cancel the factor ρmax\rho_{\text{max}} from both the numerator and denominator: β(T)=−−2qρmax(T−Tmax)ρmax[1−q(T−Tmax)2]=2q(T−Tmax)1−q(T−Tmax)2\beta(T) = -\frac{-2q\rho_{\text{max}}(T - T_{\text{max}})}{\rho_{\text{max}}[1 - q(T - T_{\text{max}})^2]} = \frac{2q(T - T_{\text{max}})}{1 - q(T - T_{\text{max}})^2}.

Final answer

(a) β(T)=2q(T−Tmax)1−q(T−Tmax)2\beta(T) = \frac{2q(T - T_{\text{max}})}{1 - q(T - T_{\text{max}})^2}; lim⁡T→Tmaxβ(T)=0 ∘C−1\lim_{T \to T_{\text{max}}} \beta(T) = 0\text{ }^\circ\text{C}^{-1}; (b) The water expands; ΔV=+0.0969 mL\Delta V = +0.0969\text{ mL}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definitions of thermodynamic response coefficients (thermal expansivity β\beta and isothermal compressibility κT\kappa_T) to ensure you always include the normalizing 1V\frac{1}{V} or 1ρ\frac{1}{\rho} factor.

  • Perform unit checks whenever deriving response coefficients: verify that β\beta carries units of (∘C)−1(^\circ\text{C})^{-1} rather than kg⋅m−3⋅(∘C)−1\text{kg}\cdot\text{m}^{-3}\cdot(^\circ\text{C})^{-1}.

Lock it in

Similar question

01

A fluid has an empirical density relation ρ(T)=ρ0(1−bT)\rho(T) = \rho_0 (1 - b T), where ρ0\rho_0 and bb are positive constants. Using β(T)=−1ρdρdT\beta(T) = -\frac{1}{\rho}\frac{d\rho}{dT}, find an exact expression for β(T)\beta(T).

Answer

Differentiating yields dρdT=−bρ0\frac{d\rho}{dT} = -b\rho_0. Substituting into the definition gives β(T)=−1ρ0(1−bT)(−bρ0)=b1−bT\beta(T) = -\frac{1}{\rho_0(1 - bT)}(-b\rho_0) = \frac{b}{1 - bT}.

02

Near 4∘C4^\circ\text{C}, the density of water is modeled as ρ(T)=ρmax[1−q(T−Tmax)2]\rho(T) = \rho_{\text{max}}[1 - q(T - T_{\text{max}})^2] with Tmax=3.98∘CT_{\text{max}} = 3.98^\circ\text{C} and q=8.00×10−6 (∘C)−2q = 8.00 \times 10^{-6}\text{ }(^\circ\text{C})^{-2}. Evaluate the thermal expansion coefficient β\beta at T=20.00∘CT = 20.00^\circ\text{C}.

Answer

Using β(T)=2q(T−Tmax)1−q(T−Tmax)2\beta(T) = \frac{2q(T - T_{\text{max}})}{1 - q(T - T_{\text{max}})^2}, compute ΔT=20.00−3.98=16.02∘C\Delta T = 20.00 - 3.98 = 16.02^\circ\text{C}. The denominator is 1−(8.00×10−6)(16.02)2≈1−0.00205=0.997951 - (8.00 \times 10^{-6})(16.02)^2 \approx 1 - 0.00205 = 0.99795. The numerator is 2(8.00×10−6)(16.02)=2.5632×10−4 ∘C−12(8.00 \times 10^{-6})(16.02) = 2.5632 \times 10^{-4}\text{ }^\circ\text{C}^{-1}. Thus β(20.00∘C)≈2.5632×10−40.99795≈+2.57×10−4 ∘C−1\beta(20.00^\circ\text{C}) \approx \frac{2.5632 \times 10^{-4}}{0.99795} \approx +2.57 \times 10^{-4}\text{ }^\circ\text{C}^{-1}.

03

A rigid container holds 2.000 L2.000\text{ L} of water initially at T=3.98∘CT = 3.98^\circ\text{C}. If the water is cooled to T=1.00∘CT = 1.00^\circ\text{C} and allowed to overflow freely, determine the volume of water spilled in mL\text{mL}, given q=8.00×10−6 (∘C)−2q = 8.00 \times 10^{-6}\text{ }(^\circ\text{C})^{-2}.

Answer

Here ΔT=1.00−3.98=−2.98∘C\Delta T = 1.00 - 3.98 = -2.98^\circ\text{C}, so (ΔT)2=8.8804 ∘C2(\Delta T)^2 = 8.8804\text{ }^\circ\text{C}^2. The final volume of the original mass is Vf=Vi1−q(ΔT)2≈Vi[1+q(ΔT)2]V_f = \frac{V_i}{1 - q(\Delta T)^2} \approx V_i [1 + q(\Delta T)^2]. The overflow volume is ΔV=Vi⋅q(ΔT)21−q(ΔT)2≈2000 mL×(8.00×10−6×8.8804)≈2000×7.104×10−5 mL≈+0.142 mL\Delta V = V_i \cdot \frac{q(\Delta T)^2}{1 - q(\Delta T)^2} \approx 2000\text{ mL} \times (8.00 \times 10^{-6} \times 8.8804) \approx 2000 \times 7.104 \times 10^{-5}\text{ mL} \approx +0.142\text{ mL}.

Loading workspace…