Resources

A crate of mass m=24.0 kgm = 24.0\text{ kg} rests on a frictionless, horizontal laboratory floor. A technician pulls the crate using a light cable that exerts a constant tension force of F=78.0 NF = 78.0\text{ N} directed at an angle of θ=35.0∘\theta = 35.0^\circ above the horizontal. Calculate the magnitude of the horizontal acceleration of the crate, axa_x, and the magnitude of the normal force exerted by the floor on the crate, FNF_N. Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer and steps

Final answer

ax=2.66 m/s2a_x = 2.66\text{ m/s}^2, FN=190 NF_N = 190\text{ N}

Steps

01

Identify the Forces and Resolve into Components

Set up a standard Cartesian coordinate system where the positive xx-axis points horizontally in the direction of the pull and the positive yy-axis points vertically upward.

Four forces act on the crate:

  1. Gravitational force pulling downward: W=mgW = mg
  2. Normal force exerted by the floor pointing upward: FNF_N
  3. Applied pulling force (tension) directed at θ=35.0∘\theta = 35.0^\circ above the horizontal: F⃗\vec{F}

Resolve the pulling force F⃗\vec{F} into horizontal and vertical components:

  • Horizontal component: Fx=Fcos⁡θ=78.0cos⁡(35.0∘)≈78.0⋅0.8192≈63.89 NF_x = F \cos\theta = 78.0 \cos(35.0^\circ) \approx 78.0 \cdot 0.8192 \approx 63.89\text{ N}
  • Vertical component: Fy=Fsin⁡θ=78.0sin⁡(35.0∘)≈78.0⋅0.5736≈44.74 NF_y = F \sin\theta = 78.0 \sin(35.0^\circ) \approx 78.0 \cdot 0.5736 \approx 44.74\text{ N}

02

Apply Newton's Second Law Horizontally

Because the horizontal surface is frictionless, the horizontal component of the tension is the only force acting along the xx-axis:

ΣFx=max\Sigma F_x = m a_x

Fx=maxF_x = m a_x

Solve for the horizontal acceleration axa_x:

ax=Fcos⁡θm=63.89 N24.0 kg≈2.66 m/s2a_x = \frac{F \cos\theta}{m} = \frac{63.89\text{ N}}{24.0\text{ kg}} \approx 2.66\text{ m/s}^2


03

Apply Equilibrium Vertically to Find the Normal Force

The crate remains in contact with the floor and does not accelerate in the vertical direction (ay=0a_y = 0). Therefore, the vertical forces must balance:

ΣFy=0\Sigma F_y = 0

FN+Fy−mg=0F_N + F_y - mg = 0

Solve for the normal force FNF_N:

FN=mg−Fsin⁡θF_N = mg - F\sin\theta

Calculate the weight W=mgW = mg:

mg=(24.0 kg)(9.80 m/s2)=235.2 Nmg = (24.0\text{ kg})(9.80\text{ m/s}^2) = 235.2\text{ N}

Substitute the values:

FN=235.2 N−44.74 N=190.46 N≈190 NF_N = 235.2\text{ N} - 44.74\text{ N} = 190.46\text{ N} \approx 190\text{ N}

Common Pitfall: Do not assume the normal force simply equals the weight (FN=mgF_N = mg). Because the pulling force has an upward vertical component, it partially supports the weight of the crate, reducing the contact force between the crate and the floor.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that the tension force has a vertical upward component, incorrectly assuming the normal force equals the full weight of the crate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fx=78.0⋅cos⁡(35.0∘)=63.89 N  ⟹  ax=63.8924.0=2.66 m/s2F_x = 78.0 \cdot \cos(35.0^\circ) = 63.89\text{ N} \implies a_x = \frac{63.89}{24.0} = 2.66\text{ m/s}^2

  2. Step 2

    FN=m⋅g  ⟹  FN=24.0⋅9.80=235 NF_N = m \cdot g \implies F_N = 24.0 \cdot 9.80 = 235\text{ N}

    Correct

    ΣFy=FN+Fsin⁡θ−mg=0  ⟹  FN=mg−Fsin⁡θ=235.2 N−44.74 N=190 N\Sigma F_y = F_N + F\sin\theta - mg = 0 \implies F_N = mg - F\sin\theta = 235.2\text{ N} - 44.74\text{ N} = 190\text{ N}

    You assumed FN=mgF_N = mg, but the tension pulls upward at an angle θ=35.0∘\theta = 35.0^\circ. The vertical component Fy=Fsin⁡(35.0∘)F_y = F\sin(35.0^\circ) partially supports the crate's weight, so FN=mg−Fsin⁡θF_N = mg - F\sin\theta.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly decomposed the pulling force along the horizontal direction using the cosine function.

You correctly applied Newton's second law along the horizontal axis to calculate the acceleration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of vertical force component in normal force calculation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You relied on the common default formula FN=mgF_N = mg instead of summing all vertical forces with a free-body diagram when an angled force is present.

REASONING PATH
Your ACEpath teacher’s suggested approach
Vertical Force Balance
  • In vertical equilibrium (ay=0a_y = 0), ΣFy=FN+∑Fup−∑Fdown=0\Sigma F_y = F_N + \sum F_{\text{up}} - \sum F_{\text{down}} = 0.

  • Always set up ΣFy=0\Sigma F_y = 0 using all upward and downward force components before solving for FNF_N.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write Newton's second law for the vertical axis: ΣFy=FN+Fsin⁡θ−mg=0\Sigma F_y = F_N + F\sin\theta - mg = 0.

  2. Solve for the normal force: FN=mg−Fsin⁡θF_N = mg - F\sin\theta.

  3. Substitute the values: FN=(24.0)(9.80)−78.0sin⁡(35.0∘)=235.2−44.74=190.46 N≈190 NF_N = (24.0)(9.80) - 78.0\sin(35.0^\circ) = 235.2 - 44.74 = 190.46\text{ N} \approx 190\text{ N}.

Final answer

ax=2.66 m/s2,  FN=190 Na_x = 2.66\text{ m/s}^2,\; F_N = 190\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a complete free-body diagram showing all vertical forces whenever an applied force acts at an angle.

  • Practice setting up ΣFy=0\Sigma F_y = 0 explicitly instead of assuming FN=mgF_N = mg by default.

OverviewACEpath Teacher's Diagnosis

02 The student swaps sine and cosine, using sin(θ) for the horizontal component and cos(θ) for the vertical component.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Fx=78.0⋅sin⁡(35.0∘)=44.74 N  ⟹  ax=44.74/24.0=1.86 m/s2F_x = 78.0 \cdot \sin(35.0^\circ) = 44.74\text{ N} \implies a_x = 44.74 / 24.0 = 1.86\text{ m/s}^2

    Correct

    Fx=78.0cos⁡(35.0∘)≈63.89 N  ⟹  ax=63.89 N24.0 kg≈2.66 m/s2F_x = 78.0 \cos(35.0^\circ) \approx 63.89\text{ N} \implies a_x = \frac{63.89\text{ N}}{24.0\text{ kg}} \approx 2.66\text{ m/s}^2

    Because the pulling angle θ=35.0∘\theta = 35.0^\circ is measured relative to the horizontal floor, the horizontal component is adjacent to the angle and must be calculated using cos⁡(35.0∘)\cos(35.0^\circ), not sin⁡(35.0∘)\sin(35.0^\circ).

  2. Step 2

    FN=m⋅g−78.0⋅cos⁡(35.0∘)  ⟹  FN=235.2−63.89=171 NF_N = m \cdot g - 78.0 \cdot \cos(35.0^\circ) \implies F_N = 235.2 - 63.89 = 171\text{ N}

    Correct

    FN=mg−78.0sin⁡(35.0∘)  ⟹  FN=235.2 N−44.74 N≈190 NF_N = mg - 78.0 \sin(35.0^\circ) \implies F_N = 235.2\text{ N} - 44.74\text{ N} \approx 190\text{ N}

    You correctly set up the vertical equilibrium relation FN=mg−FyF_N = mg - F_y, but you used the cosine component for FyF_y. Since the vertical side is opposite the horizontal angle, the upward component is Fy=Fsin⁡(35.0∘)F_y = F\sin(35.0^\circ).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the net horizontal force equals mass times horizontal acceleration.

You correctly identified that the upward vertical component of the pulling force reduces the normal force below the crate's weight.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Swap

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated the horizontal component with sine and the vertical component with cosine, confusing which side of the right triangle is adjacent to the angle measured from the horizontal.

REASONING PATH
Your ACEpath teacher’s suggested approach
Vector Component Resolution
  • When an angle θ\theta is measured with respect to the horizontal, the adjacent horizontal component is Fx=Fcos⁡θF_x = F\cos\theta and the opposite vertical component is Fy=Fsin⁡θF_y = F\sin\theta.

  • Always sketch a right triangle with the force vector as the hypotenuse and identify whether the component is adjacent to or opposite the given angle.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Fx=Fcos⁡(35.0∘)=78.0⋅cos⁡(35.0∘)≈63.89 NF_x = F \cos(35.0^\circ) = 78.0 \cdot \cos(35.0^\circ) \approx 63.89\text{ N}

  2. ax=Fxm=63.89 N24.0 kg≈2.66 m/s2a_x = \frac{F_x}{m} = \frac{63.89\text{ N}}{24.0\text{ kg}} \approx 2.66\text{ m/s}^2

  3. Fy=Fsin⁡(35.0∘)=78.0⋅sin⁡(35.0∘)≈44.74 NF_y = F \sin(35.0^\circ) = 78.0 \cdot \sin(35.0^\circ) \approx 44.74\text{ N}

  4. FN=mg−Fy=(24.0)(9.80)−44.74=235.2−44.74≈190 NF_N = mg - F_y = (24.0)(9.80) - 44.74 = 235.2 - 44.74 \approx 190\text{ N}

Final answer

ax=2.66 m/s2a_x = 2.66\text{ m/s}^2, FN=190 NF_N = 190\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the force vector and its perpendicular components as a right triangle before writing equations.

  • Double-check that the component adjacent to the reference angle uses cosine and the component opposite uses sine.

OverviewACEpath Teacher's Diagnosis

03 The student adds the vertical component of tension instead of subtracting it when solving for the normal force, misidentifying the direction of the tension's vertical influence.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fx=78.0∗cos⁡(35.0∘)=63.89 N  ⟹  ax=63.8924.0=2.66 m/s2F_x = 78.0 * \cos(35.0^\circ) = 63.89\text{ N} \implies a_x = \frac{63.89}{24.0} = 2.66\text{ m/s}^2

  2. Step 2

    FN=m∗g+F∗sin⁡(35.0∘)  ⟹  FN=235.2+44.74=280 NF_N = m * g + F * \sin(35.0^\circ) \implies F_N = 235.2 + 44.74 = 280\text{ N}

    Correct

    ΣFy=FN+Fsin⁡θ−mg=0  ⟹  FN=mg−Fsin⁡θ=235.2 N−44.74 N≈190 N\Sigma F_y = F_N + F\sin\theta - mg = 0 \implies F_N = mg - F\sin\theta = 235.2\text{ N} - 44.74\text{ N} \approx 190\text{ N}

    Because the pulling cable pulls upward at an angle of 35.0∘35.0^\circ, its vertical component acts upward in the same direction as the normal force. Therefore, the floor supports less than the crate's full weight, requiring you to subtract Fsin⁡θF\sin\theta from mgmg.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly decomposed the pulling force into trigonometric components.

You applied Newton's second law along the horizontal direction to find the acceleration accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in vertical equilibrium

You added the vertical pulling component to the weight rather than subtracting it from the weight.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Misinterpreting the direction of the force component: an upward pull partially relieves the load on the floor, so FN+Fy=mgF_N + F_y = mg, which yields FN=mg−FyF_N = mg - F_y.

REASONING PATH
Your ACEpath teacher’s suggested approach
Free-Body Force Summation
  • ΣFy=0  ⟹  (sum of upward forces)=(sum of downward forces)\Sigma F_y = 0 \implies (\text{sum of upward forces}) = (\text{sum of downward forces})

  • List all upward forces (FN+Fsin⁡θF_N + F\sin\theta) on one side and downward forces (mgmg) on the other before rearranging.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up vertical equilibrium: FN+Fsin⁡(35.0∘)−mg=0F_N + F\sin(35.0^\circ) - mg = 0.

  2. Isolate the normal force: FN=mg−Fsin⁡(35.0∘)F_N = mg - F\sin(35.0^\circ).

  3. Substitute the known values: FN=235.2 N−44.74 N=190.46 N≈190 NF_N = 235.2\text{ N} - 44.74\text{ N} = 190.46\text{ N} \approx 190\text{ N}.

Final answer

ax=2.66 m/s2a_x = 2.66\text{ m/s}^2, FN=190 NF_N = 190\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch an explicit vertical free-body diagram showing both FNF_N and FyF_y pointing upward and mgmg pointing downward.

  • Check whether the applied force lifts the object up or pushes it down to confirm whether FNF_N should be smaller or larger than mgmg.

Lock it in

Similar question

01

A 15.0 kg15.0\text{ kg} block is pushed across a smooth horizontal floor by a force of 50.0 N50.0\text{ N} directed at an angle of 20.0∘20.0^\circ below the horizontal. Calculate the magnitude of the normal force exerted by the floor. Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

FN=164 NF_N = 164\text{ N}. Set up vertical equilibrium: ΣFy=FN−mg−Fsin⁡(20.0∘)=0\Sigma F_y = F_N - mg - F\sin(20.0^\circ) = 0. Thus FN=(15.0)(9.80)+50.0sin⁡(20.0∘)=147.0+17.1=164.1 N≈164 NF_N = (15.0)(9.80) + 50.0\sin(20.0^\circ) = 147.0 + 17.1 = 164.1\text{ N} \approx 164\text{ N}.

02

A 30.0 kg30.0\text{ kg} sled is pulled along a frictionless level surface by a rope with tension T=120 NT = 120\text{ N} at an angle of 40.0∘40.0^\circ above the horizontal. Find both the horizontal acceleration axa_x and the normal force FNF_N. Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

ax=3.06 m/s2,  FN=217 Na_x = 3.06\text{ m/s}^2,\; F_N = 217\text{ N}. Horizontally: Tx=120cos⁡(40.0∘)=91.93 NT_x = 120\cos(40.0^\circ) = 91.93\text{ N}, so ax=91.9330.0≈3.06 m/s2a_x = \frac{91.93}{30.0} \approx 3.06\text{ m/s}^2. Vertically: FN=mg−Tsin⁡(40.0∘)=(30.0)(9.80)−120sin⁡(40.0∘)=294.0−77.13=216.87 N≈217 NF_N = mg - T\sin(40.0^\circ) = (30.0)(9.80) - 120\sin(40.0^\circ) = 294.0 - 77.13 = 216.87\text{ N} \approx 217\text{ N}.

03

A 20.0 kg20.0\text{ kg} crate rests on a horizontal floor with kinetic friction coefficient μk=0.250\mu_k = 0.250. A worker pulls it with a force F=80.0 NF = 80.0\text{ N} directed at 30.0∘30.0^\circ above the horizontal. Determine the normal force FNF_N and the crate's horizontal acceleration axa_x. Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

FN=156 N,  ax=1.51 m/s2F_N = 156\text{ N},\; a_x = 1.51\text{ m/s}^2. Vertically: FN=mg−Fsin⁡(30.0∘)=(20.0)(9.80)−80.0(0.500)=196.0−40.0=156.0 NF_N = mg - F\sin(30.0^\circ) = (20.0)(9.80) - 80.0(0.500) = 196.0 - 40.0 = 156.0\text{ N}. Friction force: fk=μkFN=0.250(156.0)=39.0 Nf_k = \mu_k F_N = 0.250(156.0) = 39.0\text{ N}. Horizontally: ΣFx=Fcos⁡(30.0∘)−fk=80.0(0.8660)−39.0=69.28−39.0=30.28 N\Sigma F_x = F\cos(30.0^\circ) - f_k = 80.0(0.8660) - 39.0 = 69.28 - 39.0 = 30.28\text{ N}. Thus ax=30.28 N20.0 kg≈1.51 m/s2a_x = \frac{30.28\text{ N}}{20.0\text{ kg}} \approx 1.51\text{ m/s}^2.

Loading workspace…