Resources
A block of mass is placed on an incline of adjustable angle . A coordinate system is defined with directed down the incline and directed perpendicular to the surface upward. The coefficient of kinetic friction is . Taking : (a) write the analytical expression for the acceleration along the -axis as a function of when the block is sliding down, (b) calculate at , and (c) evaluate the asymptotic limits of as (approaching free fall) and as (horizontal surface, assuming an initial push initiates motion in the -direction).](streamdown:incomplete-link)
Answer and steps
Final answer
(a) , (b) , (c) (standard vertical free fall ); as , (deceleration due purely to horizontal friction )
Steps
Part (a): Deriving the Expression for
-
Establish the coordinate system and resolve forces:
- The -axis points down the incline, parallel to the surface.
- The -axis points perpendicular to the incline, directed upward.
- Gravity acts vertically downward with magnitude . Resolving this weight vector into components:
- The normal force acts along the positive -direction: .
- Since the block moves down the incline (-direction), kinetic friction opposes the motion and acts in the negative -direction:
- Apply Newton's second law along the -axis: Since there is no motion perpendicular to the incline:
- Apply Newton's second law along the -axis: Substitute :
- Solve for : Dividing both sides by the mass :
Part (b): Evaluating at
Substitute the given values , , and :
Part (c): Evaluating the Asymptotic Limits
-
Limit as (vertical wall / free fall):
- and
- Physical interpretation: The normal force vanishes (), eliminating friction completely. The block accelerates downward under gravity alone (free fall).
-
Limit as (horizontal surface with motion in ):
- and
- Physical interpretation: On a flat surface, the downhill gravity component vanishes while normal force equals full weight (). The only force acting along the horizontal axis is kinetic friction opposing motion, causing deceleration at a rate of .
Typical errors
01 The student confuses the sine and cosine trigonometric projections for the parallel and perpendicular components of gravity, setting the parallel component to cos(θ) and the normal force to sin(θ).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because the incline angle is measured from the horizontal, the component of gravity perpendicular to the incline is , which balances the normal force .
- Step 2Correct
You applied Newton's second law correctly, but this expression carries forward the swapped gravity components from your perpendicular and parallel force balance.
- Step 3Correct
Because , your evaluation yielded the correct numerical magnitude (up to minor intermediate rounding), but it stems from the swapped formula.
- Step 4Correct
The swapped trigonometric functions inverted your physical limits, causing the vertical free-fall limit to appear as pure friction and the flat horizontal limit to appear as free fall.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that kinetic friction opposes downward motion along the incline with magnitude .
You correctly formulated and eliminated mass to solve for acceleration.
You substituted values accurately and evaluated limits using sound algebraic procedures.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou assigned the parallel downhill force to and the perpendicular normal force to .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou likely associated the horizontal/parallel direction automatically with cosine and the vertical/perpendicular direction with sine, rather than tracing which side of the vector triangle is adjacent to the incline angle .
REASONING PATH
Your ACEpath teacher’s suggested approach- Extreme Angle Check
As the incline angle flattens (), the parallel downhill pull of gravity must vanish (), while the surface supports full weight ().
Check whether your parallel component uses (since ) and your perpendicular component uses (since ).
- Right-Triangle Angle Placement
The angle between the true vertical weight vector and the perpendicular to the incline is equal to the incline angle .
Treat the perpendicular component as the side adjacent to () and the parallel component as the side opposite to ().
CORRECTED PATH
ACEpath Teacher's DemonstrationResolve gravity into components: down the incline and perpendicular into the surface.
Equate perpendicular forces: , which gives kinetic friction .
Apply : .
Evaluate at : .
Evaluate the limits: , and as , .
(a) , (b) , (c) and
02 The student adds rather than subtracts the friction force in Newton's second law, incorrectly treating friction as acting down the incline in the direction of motion.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You added the friction force to the downhill component of gravity instead of subtracting it. Because the block moves down the incline (), kinetic friction opposes motion and acts up the incline ().
- Step 3Correct
You substituted the numbers and evaluated the arithmetic accurately, but your result inherits the sign error from part (a).
- Step 4Correct
Your limit as matches the expected value because , but for , friction should cause a deceleration of rather than an acceleration.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved the component of gravity perpendicular to the incline to find the normal force .
You used the correct relationship for the magnitude of kinetic friction, .
You correctly identified the trigonometric limits as and .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of in the sum of forces along the inclined -axis.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisMisinterpreting the direction of kinetic friction relative to the chosen coordinate axis: kinetic friction always opposes the relative sliding velocity between surfaces, so when motion is along , friction must point along .
REASONING PATH
Your ACEpath teacher’s suggested approach- Check the Relative Motion Vector
Kinetic friction always points opposite to the relative velocity vector of the sliding surface.
Identify the direction of sliding along your chosen axis: if is in the -direction, assign a negative sign to friction in .
- Physical Reality Check at Extreme Angles
Friction on a passive sliding block cannot cause forward speed to increase on a flat surface without an active external driving force.
Check the limit: a positive acceleration on a flat surface would mean friction propels the object forward, which signals a sign error.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up Newton's second law with friction opposing downhill motion: .
Substitute : .
Divide by mass to get .
Evaluate at : .
Evaluate the limits: as , ; as , .
(a) , (b) , (c) ,
03 The student neglects the incline angle dependence of the normal force, incorrectly assuming N = m*g as if the surface were horizontal.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You set the normal force equal to the full weight . Along the tilted -axis (perpendicular to the incline), the component of gravity is , so equilibrium requires .
- Step 2Correct
You correctly applied Newton's second law along the -direction, but this expression carries over the missing factor from your normal force formula.
- Step 3Correct
You substituted the angle and constants accurately into your derived equation, but the missing factor led to an underestimated acceleration.
- Step 4
90.0^: a_x 9.80*(1 - 0.350) = 6.37^2 \ 0^: a_x 9.80*(0 - 0.350) = -3.43^2
Correct$\lim_{ 90.0^} a_x = g(1 - \mu_k \cdot 0) = 9.80\text{ m/s}^2 \\ \\lim_{\theta \to 0^\circ}\mu\cdot\text{ m/s}$^2
Your limit as matched the correct numerical value because , but as , the surface becomes vertical (, no friction), which should yield pure free fall rather than .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved the component of gravity pulling the block down the incline as .
You correctly recognized that kinetic friction opposes the downhill motion along the -axis.
You correctly set up Newton's second law and solved for acceleration algebraically.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou defaulted to the horizontal-surface formula for normal force () instead of setting up a dynamic force balance perpendicular to the inclined plane ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Resolve Forces in Tilted Coordinates
When coordinates are aligned with an incline of angle , weight has components parallel to the slope and perpendicular into the slope.
Draw a right triangle for the weight vector with the hypotenuse along the vertical and verify that the adjacent leg to is perpendicular to the incline.
- Equilibrium Perpendicular to the Incline
Since the block remains on the surface, , giving .
Always solve explicitly before writing the friction force .
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute into kinetic friction:
Apply :
Divide by :
Evaluate at :
Take the limit as :
Take the limit as :
(a) , (b) , (c) ; as ,
Lock it in
When an incline is at angle above the horizontal, which trigonometric component of gravity acts parallel to the incline surface?
. The component parallel to the ramp is opposite to the incline angle in the vector triangle, so it must vanish when .
Similar question
A box rests on a frictionless ramp tilted at to the horizontal. Calculate the magnitude of the normal force and the parallel acceleration down the ramp. (Use ).
Answer
; .
A block slides down an incline tilted at angle . If the coefficient of kinetic friction is , find the critical angle at which the block slides down at constant speed ().
Answer
Setting gives , so , which means .
A skier of mass slides down a slope of angle with . An aerodynamic drag force acts opposite to the velocity along the slope. Write the differential equation for in terms of , , , , , and .
Answer
Summing forces along the slope: . Dividing by yields .