Resources

A toy cart travels in a horizontal circular groove of radius R=2.50 mR = 2.50\text{ m} centered at the origin, moving counterclockwise at a constant speed of v0=5.00 m/sv_0 = 5.00\text{ m/s}. Exactly at the northernmost point (0 m,2.50 m)(0\text{ m}, 2.50\text{ m}), the cart hits an unconstrained break-away boundary and instantly leaves the circular track to move across a frictionless horizontal floor. (a) In what specific direction does the cart travel immediately after exiting the circular groove? (b) Calculate the Cartesian coordinates (x,y)(x, y) of the cart Δt=1.20 s\Delta t = 1.20\text{ s} after passing the release point.

Answer and steps

Final answer

(a) Due west (along the negative xx-axis, tangent to the circle at the release point: direction of −i^-\hat{i}); (b) (x,y)=(−6.00 m,2.50 m)(x, y) = (-6.00\text{ m}, 2.50\text{ m}).

Steps

Part (a): Determining the Direction of Motion After Release

  1. Tangential Nature of Velocity in Circular Motion:
    At every instant during circular motion, the velocity vector of an object is tangent to the circular path in the direction of travel.

    • The circle is centered at (0 m,0 m)(0\text{ m}, 0\text{ m}) with radius R=2.50 mR = 2.50\text{ m}.
    • The cart travels in a counterclockwise direction in the xyxy-plane.
    • At the northernmost point, which lies along the positive yy-axis at (0 m,2.50 m)(0\text{ m}, 2.50\text{ m}), the radius vector points due north (in the +j^+\hat{j} direction).
    • Moving counterclockwise along the circle means that at the very top of the circle, the velocity points perpendicular to the radius and directed to the left. In standard Cartesian directions, this corresponds to due west (along the negative xx-axis, or in the −i^-\hat{i} direction).
  2. Application of Newton's First Law:
    Once the cart leaves the confining circular groove onto a frictionless surface, the inward centripetal force provided by the track vanishes. According to Newton's First Law of Motion, an object free of net external forces maintains its instantaneous velocity. Therefore, the cart continues to move in a straight line due west (in the direction of −i^-\hat{i}).

Common Pitfall: A frequent misconception is that an object will fly radially outward (away from the center) when released from circular motion. Because there is no outward force acting on the body, it travels purely along the tangent line defined by its instantaneous velocity at the point of release.


Part (b): Calculating the Coordinates After Δt=1.20 s\Delta t = 1.20\text{ s}

  1. Identify the Velocity Components:
    Since the cart travels due west at a constant speed of v0=5.00 m/sv_0 = 5.00\text{ m/s}: vx=−5.00 m/sv_x = -5.00\text{ m/s} vy=0 m/sv_y = 0\text{ m/s}
  2. Calculate the Displacement Along Each Axis:
    With zero net force, the velocity remains constant:

    • Displacement in the xx-direction: Δx=vxΔt=(−5.00 m/s)(1.20 s)=−6.00 m\Delta x = v_x \Delta t = (-5.00\text{ m/s})(1.20\text{ s}) = -6.00\text{ m}
    • Displacement in the yy-direction: Δy=vyΔt=(0 m/s)(1.20 s)=0 m\Delta y = v_y \Delta t = (0\text{ m/s})(1.20\text{ s}) = 0\text{ m}
  3. Determine the Final Coordinates:
    Starting from the initial release coordinates (x0,y0)=(0 m,2.50 m)(x_0, y_0) = (0\text{ m}, 2.50\text{ m}): x=x0+Δx=0 m+(−6.00 m)=−6.00 mx = x_0 + \Delta x = 0\text{ m} + (-6.00\text{ m}) = -6.00\text{ m} y=y0+Δy=2.50 m+0 m=2.50 my = y_0 + \Delta y = 2.50\text{ m} + 0\text{ m} = 2.50\text{ m}

Thus, the position of the cart at t=1.20 st = 1.20\text{ s} is (−6.00 m,2.50 m)(-6.00\text{ m}, 2.50\text{ m}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student believes the cart is thrown radially outward due to a centrifugal force when released from circular motion.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    The centrifugal force pushes the cart radially outward away from the center. The cart travels in the positive yy-direction (due north).

    Correct

    At (0 m,2.50 m)(0\text{ m}, 2.50\text{ m}), counterclockwise circular motion means the instantaneous velocity vector points tangent to the circle toward the negative xx-axis (due west, or in the −i^-\hat{i} direction). Once released, Newton's first law ensures it continues straight in this tangential direction.

    You treated centrifugal force as a real physical force pushing the object outward. In an inertial reference frame, centrifugal force does not exist. An object moving in a circle has an instantaneous velocity that is purely tangential to the circle. When the centripetal constraint is removed, no net force acts, so the object moves along that tangent line (due west).

  2. Step 2

    vx=0 m/s,  vy=5.00 m/s  ⟹  x=0 m,  y=2.50 m+(5.00 m/s)(1.20 s)=8.50 m  ⟹  (0 m,8.50 m)v_x = 0\text{ m/s},\; v_y = 5.00\text{ m/s} \implies x = 0\text{ m},\; y = 2.50\text{ m} + (5.00\text{ m/s})(1.20\text{ s}) = 8.50\text{ m} \implies (0\text{ m}, 8.50\text{ m})

    Correct

    vx=−5.00 m/s,  vy=0 m/s  ⟹  x=0 m+(−5.00 m/s)(1.20 s)=−6.00 m,  y=2.50 m  ⟹  (−6.00 m,2.50 m)v_x = -5.00\text{ m/s},\; v_y = 0\text{ m/s} \implies x = 0\text{ m} + (-5.00\text{ m/s})(1.20\text{ s}) = -6.00\text{ m},\; y = 2.50\text{ m} \implies (-6.00\text{ m}, 2.50\text{ m})

    Your kinematic calculation d=vΔtd = v \Delta t was mathematically sound, but it used the incorrect velocity components resulting from the directional error in Part (a).

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that after exiting the track onto a frictionless floor, the cart travels at a constant speed in a straight line.

You correctly used linear kinematics to calculate displacement from speed and elapsed time.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Centrifugal Force Misconception

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You believed that circular motion creates a real outward 'centrifugal' force that pushes an object away from the center when released, overlooking that the instantaneous velocity is purely tangential and that Newton's first law governs motion once constraints are removed.

REASONING PATH
Your ACEpath teacher’s suggested approach
Velocity Direction in Circular Motion
  • At every point along a curved path, the instantaneous velocity vector is tangent to the path in the direction of travel.

  • Draw a circle and sketch the tangent line at the release point in the direction of travel (counterclockwise at (0,R)(0, R) points left, or −i^-\hat{i}).

Newton's First Law After Release
  • When the inward centripetal force is suddenly removed, the net horizontal force becomes zero, so the object maintains its instantaneous velocity vector v⃗0\vec{v}_0.

  • Set the post-release velocity equal to the tangential velocity at release: v⃗=v⃗tangent\vec{v} = \vec{v}_{\text{tangent}}, never radially outward.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. For counterclockwise motion, the tangent at the top point (0 m,2.50 m)(0\text{ m}, 2.50\text{ m}) points in the −i^-\hat{i} direction (due west), giving v⃗=(−5.00 m/s) i^+(0 m/s) j^\vec{v} = (-5.00\text{ m/s})\,\hat{i} + (0\text{ m/s})\,\hat{j}.

  2. By Newton's first law, the cart continues at constant velocity: Δx=vxΔt=(−5.00 m/s)(1.20 s)=−6.00 m\Delta x = v_x \Delta t = (-5.00\text{ m/s})(1.20\text{ s}) = -6.00\text{ m} and Δy=0 m\Delta y = 0\text{ m}.

  3. Add the displacements to the initial release position (x0,y0)=(0 m,2.50 m)(x_0, y_0) = (0\text{ m}, 2.50\text{ m}) to find the final position: x=0 m−6.00 m=−6.00 mx = 0\text{ m} - 6.00\text{ m} = -6.00\text{ m} and y=2.50 m+0 m=2.50 my = 2.50\text{ m} + 0\text{ m} = 2.50\text{ m}.

Final answer

(a) Due west (−i^-\hat{i} direction); (b) (−6.00 m,2.50 m)(-6.00\text{ m}, 2.50\text{ m})

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing circular trajectories and sketching the velocity vector tangent to the curve at the 12, 3, 6, and 9 o'clock positions.

  • Remember that 'centrifugal force' is only an apparent sensation in a rotating frame; in any standard ground frame, objects leave circular paths along the tangent line, never radially.

OverviewACEpath Teacher's Diagnosis

02 The student confuses counterclockwise rotation with clockwise rotation at the top of the circle, assigning the tangential velocity in the positive x-direction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    At the top of the circle moving counterclockwise, the velocity is tangent to the circle to the right. The cart travels in the positive xx-direction (due east).

    Correct

    At the top of the circle (0 m,2.50 m)(0\text{ m}, 2.50\text{ m}) moving counterclockwise, the velocity points tangent to the circle to the left, which is along the negative xx-direction (due west, or −i^-\hat{i}).

    In counterclockwise motion around the origin, an object at the top of the circle moves to the left (toward the negative xx-axis). Moving to the right at the top corresponds to clockwise rotation.

  2. Step 2

    vx=5.00 m/s, vy=0 m/s  ⟹  x=0 m+(5.00 m/s)(1.20 s)=6.00 m, y=2.50 m  ⟹  Coordinates are (6.00 m,2.50 m)v_x = 5.00\text{ m/s},\, v_y = 0\text{ m/s} \implies x = 0\text{ m} + (5.00\text{ m/s})(1.20\text{ s}) = 6.00\text{ m},\, y = 2.50\text{ m} \implies \text{Coordinates are } (6.00\text{ m}, 2.50\text{ m})

    Correct

    vx=−5.00 m/s, vy=0 m/s  ⟹  x=0 m+(−5.00 m/s)(1.20 s)=−6.00 m, y=2.50 m  ⟹  Coordinates are (−6.00 m,2.50 m)v_x = -5.00\text{ m/s},\, v_y = 0\text{ m/s} \implies x = 0\text{ m} + (-5.00\text{ m/s})(1.20\text{ s}) = -6.00\text{ m},\, y = 2.50\text{ m} \implies \text{Coordinates are } (-6.00\text{ m}, 2.50\text{ m})

    Your kinematic formula Δx=vxΔt\Delta x = v_x \Delta t and constant-yy reasoning were completely sound, but the resulting position inherits the sign error from using +5.00 m/s+5.00\text{ m/s} instead of −5.00 m/s-5.00\text{ m/s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the cart travels along the instantaneous tangent line upon release.

You correctly determined that the vertical velocity component is zero at the northernmost point.

You applied constant-velocity kinematics accurately to compute displacement over time.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Rotational Direction Confusion

You associated counterclockwise motion at the apex with moving to the right instead of to the left.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the tangent direction of counterclockwise (CCW) versus clockwise (CW) motion at the northernmost point (12 o'clock). In standard Cartesian orientation, CCW circulation goes from +x+x (3 o'clock) up to +y+y (12 o'clock), then left to −x-x (9 o'clock), and down to −y-y (6 o'clock).

REASONING PATH
Your ACEpath teacher’s suggested approach
Visualize the Circle on a Clock Face
  • Counterclockwise motion traverses 12→9→6→312 \to 9 \to 6 \to 3.

  • At 12 o'clock (the northernmost point), heading toward 9 o'clock means pointing to the left (−i^-\hat{i}, due west).

Vector Cross Product / Unit Tangent Verification
  • For angular velocity vector ω⃗=ωk^\vec{\omega} = \omega\hat{k} (counterclockwise), tangential velocity is v⃗=ω⃗×r⃗\vec{v} = \vec{\omega} \times \vec{r}.

  • With position r⃗=Rj^\vec{r} = R\hat{j}, calculate v⃗=(ωk^)×(Rj^)=−ωRi^\vec{v} = (\omega\hat{k}) \times (R\hat{j}) = -\omega R\hat{i}, confirming motion in the negative xx-direction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the initial velocity vector to point due west: v⃗=−5.00i^ m/s\vec{v} = -5.00\hat{i}\text{ m/s}, so vx=−5.00 m/sv_x = -5.00\text{ m/s} and vy=0 m/sv_y = 0\text{ m/s}.

  2. Compute the horizontal position after Δt=1.20 s\Delta t = 1.20\text{ s}: x=x0+vxΔt=0 m+(−5.00 m/s)(1.20 s)=−6.00 mx = x_0 + v_x \Delta t = 0\text{ m} + (-5.00\text{ m/s})(1.20\text{ s}) = -6.00\text{ m}.

  3. Keep the vertical position constant because vy=0 m/sv_y = 0\text{ m/s}: y=2.50 my = 2.50\text{ m}.

Final answer

(a) Due west (−i^-\hat{i}); (b) (−6.00 m,2.50 m)(-6.00\text{ m}, 2.50\text{ m})

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a circle with four arrowheads showing the rotation direction before writing down velocity components.

  • Double-check cardinal directions: at the top of a circle, moving left is west (−i^-\hat{i}) and moving right is east (+i^+\hat{i}).

  • Practice tracking tangent vectors at all four quadrants for both clockwise and counterclockwise paths.

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly assumes the cart continues along a curved path or accelerates inward due to centripetal acceleration after leaving the track.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The cart tangent to the track. The cart travels in the negative x-direction (due west).

  2. Step 2

    ac=v02R=(5.00 m/s)22.50 m=10.0 m/s2a_c = \frac{v_0^2}{R} = \frac{(5.00\text{ m/s})^2}{2.50\text{ m}} = 10.0\text{ m/s}^2 directed downward

    Correct

    Fnet=0  ⟹  a=0 m/s2F_{\text{net}} = 0 \implies a = 0\text{ m/s}^2

    Once the cart leaves the confining groove onto a frictionless horizontal surface, the inward track force disappears. Because the net horizontal force is zero, the acceleration is zero, not aca_c.

  3. Step 3

    x=−(5.00 m/s)(1.20 s)=−6.00 mx = -(5.00\text{ m/s})(1.20\text{ s}) = -6.00\text{ m}

  4. Step 4

    y=2.50 m−(12)(10.0 m/s2)(1.20 s)2=−4.70 my = 2.50\text{ m} - \left(\frac{1}{2}\right)(10.0\text{ m/s}^2)(1.20\text{ s})^2 = -4.70\text{ m}

    Correct

    y=y0+vyΔt=2.50 m+(0 m/s)(1.20 s)=2.50 my = y_0 + v_y \Delta t = 2.50\text{ m} + (0\text{ m/s})(1.20\text{ s}) = 2.50\text{ m}

    Because there is no downward force after release, the acceleration in the yy-direction is zero, so the yy-coordinate remains at 2.50 m2.50\text{ m}.

  5. Step 5

    Coordinates are (−6.00 m,−4.70 m)(-6.00\text{ m}, -4.70\text{ m})

    Correct

    (x,y)=(−6.00 m,2.50 m)(x, y) = (-6.00\text{ m}, 2.50\text{ m})

    This final coordinate pair is affected by the incorrect yy-coordinate from Step 4.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the tangential direction of motion at the top of the circle as due west.

You accurately calculated the constant-velocity horizontal displacement over the 1.20 s1.20\text{ s} interval.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Centripetal force persistence after release

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated centripetal acceleration as a persistent physical force that continues to accelerate the object after the physical constraint of the circular track has been removed.

REASONING PATH
Your ACEpath teacher’s suggested approach
Newton's First Law on Release
  • Centripetal acceleration requires a real physical inward force (such as tension, normal force, or friction). The instant the physical constraint ends, that inward force becomes zero.

  • Set the acceleration to zero immediately after release unless another physical force acts on the body.

Straight-Line Inertial Motion
  • With F⃗net=0\vec{F}_{\text{net}} = 0, an object moves in a straight line at constant velocity: r⃗(t)=r⃗0+v⃗0t\vec{r}(t) = \vec{r}_0 + \vec{v}_0 t.

  • Keep both velocity components constant after release: vx=−5.00 m/sv_x = -5.00\text{ m/s} and vy=0 m/sv_y = 0\text{ m/s}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that on the horizontal frictionless floor after exiting the groove, ΣFx=0\Sigma F_x = 0 and ΣFy=0\Sigma F_y = 0, so ax=0a_x = 0 and ay=0a_y = 0.

  2. Determine the initial velocity components at release: vx=−5.00 m/sv_x = -5.00\text{ m/s} and vy=0 m/sv_y = 0\text{ m/s}.

  3. Calculate the position components after Δt=1.20 s\Delta t = 1.20\text{ s}: x=0 m+(−5.00 m/s)(1.20 s)=−6.00 mx = 0\text{ m} + (-5.00\text{ m/s})(1.20\text{ s}) = -6.00\text{ m} and y=2.50 m+(0 m/s)(1.20 s)=2.50 my = 2.50\text{ m} + (0\text{ m/s})(1.20\text{ s}) = 2.50\text{ m}.

Final answer

(x,y)=(−6.00 m,2.50 m)(x, y) = (-6.00\text{ m}, 2.50\text{ m})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review Newton's First Law of Motion and identify what provides the centripetal force in each circular motion problem.

  • Practice drawing free-body diagrams immediately before release versus immediately after release.

Lock it in

Similar question

01

A small puck moves clockwise in a horizontal circle of radius R=4.0 mR = 4.0\text{ m} centered at the origin. At the easternmost point (4.0 m,0 m)(4.0\text{ m}, 0\text{ m}), it is released onto a frictionless floor at a constant speed of 8.0 m/s8.0\text{ m/s}. Find its position (x,y)(x, y) after Δt=0.50 s\Delta t = 0.50\text{ s}.

Answer

Moving clockwise, at the easternmost point (4.0 m,0 m)(4.0\text{ m}, 0\text{ m}), the tangential velocity points due south: v⃗=−8.0 j^ m/s\vec{v} = -8.0\,\hat{j}\text{ m/s}. The displacement is Δx=0 m\Delta x = 0\text{ m} and Δy=(−8.0 m/s)(0.50 s)=−4.0 m\Delta y = (-8.0\text{ m/s})(0.50\text{ s}) = -4.0\text{ m}. Final coordinates: (4.0 m,−4.0 m)(4.0\text{ m}, -4.0\text{ m}).

02

An athlete spins a hammer (a heavy sphere on a wire) counterclockwise in a horizontal circle of radius 1.80 m1.80\text{ m} centered at the origin. The hammer is released at the point (1.80 m,0 m)(1.80\text{ m}, 0\text{ m}) with a speed of 25.0 m/s25.0\text{ m/s}. (a) State the velocity vector v⃗\vec{v} immediately after release. (b) What is the straight-line distance from the origin to the hammer 0.40 s0.40\text{ s} after release?

Answer

(a) Moving counterclockwise at (1.80 m,0 m)(1.80\text{ m}, 0\text{ m}), the tangent is due north: v⃗=25.0 j^ m/s\vec{v} = 25.0\,\hat{j}\text{ m/s}. (b) At t=0.40 st = 0.40\text{ s}, x=1.80 mx = 1.80\text{ m} and y=(25.0 m/s)(0.40 s)=10.0 my = (25.0\text{ m/s})(0.40\text{ s}) = 10.0\text{ m}. Distance from origin: d=(1.80)2+(10.0)2=3.24+100≈10.16 md = \sqrt{(1.80)^2 + (10.0)^2} = \sqrt{3.24 + 100} \approx 10.16\text{ m}.

03

A bead slides counterclockwise along a circular hoop of radius R=5.0 mR = 5.0\text{ m} centered at the origin. It leaves the hoop at an angle θ=30∘\theta = 30^\circ above the positive xx-axis with a speed of 10.0 m/s10.0\text{ m/s}. Express its post-release velocity vector v⃗\vec{v} in unit-vector notation, and determine its position vector r⃗(t)\vec{r}(t) after Δt=2.0 s\Delta t = 2.0\text{ s}.

Answer

The position at release is r⃗0=(Rcos⁡30∘)i^+(Rsin⁡30∘)j^=(4.33 i^+2.50 j^) m\vec{r}_0 = (R\cos 30^\circ)\hat{i} + (R\sin 30^\circ)\hat{j} = (4.33\,\hat{i} + 2.50\,\hat{j})\text{ m}. The unit tangent for counterclockwise motion is u^t=−sin⁡θ i^+cos⁡θ j^=−0.50 i^+0.866 j^\hat{u}_t = -\sin\theta\,\hat{i} + \cos\theta\,\hat{j} = -0.50\,\hat{i} + 0.866\,\hat{j}. Thus v⃗=(−5.00 i^+8.66 j^) m/s\vec{v} = (-5.00\,\hat{i} + 8.66\,\hat{j})\text{ m/s}. After Δt=2.0 s\Delta t = 2.0\text{ s}, r⃗=r⃗0+v⃗Δt=(4.33−10.00)i^+(2.50+17.32)j^=(−5.67 i^+19.82 j^) m\vec{r} = \vec{r}_0 + \vec{v}\Delta t = (4.33 - 10.00)\hat{i} + (2.50 + 17.32)\hat{j} = (-5.67\,\hat{i} + 19.82\,\hat{j})\text{ m}.

Loading workspace…