Resources
A narrow beam of light strikes a flat, horizontal plane mirror at an angle of relative to the mirror's normal (the perpendicular line to the surface). Determine the angle of reflection relative to the normal, and calculate the total angle of deviation through which the light beam is turned from its original direction of propagation.
Answer and steps
Final answer
,
Steps
Find the angle of reflection ()
According to the Law of Reflection, the angle of reflection equals the angle of incidence, and both angles are measured with respect to the normal (the line perpendicular to the mirror's surface):
Given that the beam strikes at an angle of incidence :
Determine the angle of deviation ()
The angle of deviation is the angle between the light beam's initial direction of propagation (if it had continued straight without reflecting) and its new reflected path:
- Imagine the incident ray continuing in a straight line through the surface. The straight-line continuation and the backward extension of the incident ray form a straight angle of .
- The total angle between the incident ray and the reflected ray is .
- Since a straight line measures , the deviation is the difference between this straight path and the total turned angle:
Substitute the given value :
Common Pitfall to Avoid
Be careful to measure angles from the normal, not the mirror's surface. If an angle is given relative to the surface (the glancing angle ), you must first find before applying the standard reflection formulas. Here, the angle is already given relative to the normal.
Typical errors
01 The student confuses the angle of deviation with the angle between the incident and reflected rays, taking the deviation to be 2θ_i instead of 180° - 2θ_i.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
The expression gives the angle between the incident ray and the reflected ray, not the deviation. The angle of deviation measures how far the ray turns from its original forward direction of propagation, which is .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled that the angle of reflection equals the angle of incidence.
You properly substituted to find .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the total angle between the incoming and reflected rays () as the deviation angle, rather than subtracting that angle from the straight path the light would have followed had the mirror not redirected it.
REASONING PATH
Your ACEpath teacher’s suggested approach- Define the angle of deviation
Deviation is the angle between the undeflected forward continuation of the incident beam and the reflected beam: .
Draw a dashed straight line continuing the incident ray past the mirror surface to see the turn angle supplementary to the ray angle.
CORRECTED PATH
ACEpath Teacher's DemonstrationExtend the incident ray forward in a straight line past the point of incidence to represent the undeflected direction.
Subtract the total angle between the incident and reflected rays from : .
,
02 The student misinterprets the angle of deviation as the angle between the reflected ray and the mirror surface (glancing angle), obtaining 90° - 38°.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You calculated the glancing angle between the ray and the mirror surface (). The angle of deviation is the angle between the light beam's original straight-line continuation and its reflected path, given by .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified and applied the law of reflection to find .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the angle of deviation with the glancing angle (the angle between the ray and the mirror surface). The angle of deviation measures how much the ray turns from its forward propagation path, forming a straight-line supplementary relationship .
REASONING PATH
Your ACEpath teacher’s suggested approach- Define Angle of Deviation
The angle of deviation is measured from the straight-line continuation of the incident ray to the reflected ray, not from the mirror surface.
Draw a dashed line continuing the incident ray past the mirror surface, then mark the turn angle from that line to the reflected ray: .
CORRECTED PATH
ACEpath Teacher's DemonstrationExtend the incident ray forward in a straight line past the reflection point.
Note that the straight line angle is , and the angle between the incident and reflected rays is .
Calculate the turn angle: .
,
03 The student confuses the angle measured relative to the normal with the glancing angle to the surface, mistakenly calculating θ_r as 90° - 38.0° = 52.0°.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You subtracted the given angle from , treating it as a glancing angle to the surface. However, the problem explicitly states that the beam strikes at relative to the mirror's normal, so directly.
- Step 2Correct
You applied the correct relationship , but your numerical result was affected by the incorrect value of from Step 1.
WHAT YOU DID WELL
Compliments from Your TeacherYou used the correct geometric relationship to find the total angle of deviation.
You carried out your arithmetic accurately based on your chosen angle.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou performed a complementary angle subtraction () even though the angle was already defined relative to the normal.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the problem's given angle as a glancing angle to the mirror surface rather than the angle of incidence measured from the normal line.
REASONING PATH
Your ACEpath teacher’s suggested approach- Reference Line Check
Angles in the law of reflection ( and ) are measured from the normal line perpendicular to the surface, not from the mirror face.
Read the problem phrasing carefully: if it says 'relative to the normal', use directly; only subtract from if it specifies 'relative to the surface' or 'glancing angle'.
- Angle of Deviation Formula
For reflection from a single plane mirror, the beam turns through .
Always substitute the true angle of incidence relative to the normal into before subtracting from .
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the angle of incidence directly from the problem statement: because it is already given relative to the normal.
Apply the law of reflection: .
Calculate the angle of deviation: .
,
Lock it in
What is the formula for the angle of deviation of a light ray undergoing reflection at a plane mirror with angle of incidence ?
. Deviation is measured from the undeflected forward path, forming a straight line () with the incoming direction.
Similar question
A laser beam hits a flat horizontal mirror at an angle of incidence of measured relative to the normal. Find the angle of reflection and the angle of deviation .
Answer
, . Key steps: By the law of reflection, . The angle of deviation is .
A light ray strikes a plane mirror such that the glancing angle between the incident ray and the mirror surface is . Calculate the angle of incidence and the total angle of deviation .
Answer
, . Key steps: Since the normal is perpendicular to the surface, . The angle of deviation is (or directly ).
A light ray is deflected by a plane mirror through an angle of deviation . Determine the angle of incidence and the angle between the incident ray and the reflected ray.
Answer
, angle between rays . Key steps: Use , giving . The angle between the incident and reflected rays is .