Resources
In an experiment designed to measure the charge-to-mass ratio () of an electron using a fine-beam tube, electrons are accelerated from a heated cathode to an anode through an adjustable potential difference . The tube is placed at the center of a pair of Helmholtz coils of radius and , producing a uniform magnetic field , where . With the coil current set to and accelerating voltage , the circular electron beam radius is measured with an optical scale to be . Calculate the experimental value of in coulombs per kilogram ().
Answer and steps
Final answer
Steps
Relate Velocity to the Accelerating Voltage
Electrons emitted from the cathode are accelerated toward the anode through a potential difference . By the work-energy theorem, the electric potential energy lost equals the kinetic energy gained:
Solving for the velocity of the electrons:
Relate Velocity to the Magnetic Field and Orbit Radius
Once the electrons enter the uniform magnetic field perpendicular to their velocity, the magnetic Lorentz force acts as the centripetal force maintaining their circular trajectory of radius :
Simplifying gives an expression for the orbital speed:
Derive the Expression for Specific Charge ()
Equate the two expressions for (or square the orbital speed and equate it to from the energy equation):
Dividing both sides by and rearranging yields:
Calculate the Magnetic Field
The magnetic field at the midpoint of the Helmholtz coil pair is given by:
Substitute the given values:
Compute the Charge-to-Mass Ratio ()
Substitute the experimental parameters (, , and the calibrated field parameters where accounts for experimental geometry) into the working formula:
Common Pitfall: When measuring circular paths in fine-beam tubes, optical scales often display the path diameter () rather than the radius (). Always ensure that the radius value is used in , as squaring an erroneous diameter introduces a factor of error.
Typical errors
01 The student forgets to square the magnetic field B or radius r when equating the kinetic energy relation with the centripetal force relation, using e/m = 2V / (B * r²).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
, and
- Step 3Correct
When squaring to equate it with , every factor in the numerator must be squared: . Equating and simplifying yields , so must be squared in the denominator.
- Step 4Correct
This numerical calculation was affected by using instead of in your derived formula, along with a power-of-ten calculation error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the magnetic field of the Helmholtz coil pair using the given formula.
You correctly applied energy conservation to relate kinetic energy to the potential difference.
You correctly balanced the magnetic Lorentz force with the required centripetal force.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou omitted the square exponent on when squaring the velocity expression and substituting it into the energy equation.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisRushing through intermediate algebraic elimination of velocity rather than explicitly squaring all factors in parentheses before canceling shared variables.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Algebraic Exponents
When an expression is expanded, each term must be squared: .
Write out fully before canceling terms against .
- Dimensional Consistency Check
The units of are , which must match the units of .
Verify dimensions: . Missing an exponent on breaks dimensional balance.
CORRECTED PATH
ACEpath Teacher's DemonstrationSquare the velocity relation: .
Equate with the voltage relation: .
Divide both sides by and isolate : .
Substitute , , and .
(or using calibrated field geometry)
02 The student omits the factor of 2 from the kinetic energy equation (1/2)mv² = eV, resulting in the formula e/m = V / (B² * r²).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You wrote kinetic energy as instead of . The work done by the electric field on the electron is , which equals the gained kinetic energy .
- Step 3
- Step 4Correct
Because the factor of was missing from your kinetic energy expression, your resulting algebraic formula for the specific charge was missing a factor of in the numerator.
- Step 5Correct
Your arithmetic was carried out accurately using your derived formula, but the result is half the correct value due to the missing factor of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly computed the uniform magnetic field of the Helmholtz coils using the standard formula.
You correctly related the magnetic Lorentz force to the centripetal force for circular motion.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeWriting instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating velocity squared with kinetic energy , forgetting the leading factor of in .
REASONING PATH
Your ACEpath teacher’s suggested approach- Work-Energy Equivalence
The kinetic energy gained by a charged particle accelerated from rest through potential difference is .
Always write the full kinetic energy formula before equating it to , ensuring .
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the kinetic energy gained from the accelerating voltage: .
Square the velocity obtained from the magnetic circular orbit condition : .
Equate the two expressions for : .
Substitute the values , , and : (or using calibrated field geometry).
(nominal field) or (calibrated)
03 The student misinterprets the measured beam radius r as diameter, dividing r by 2 and calculating with r = 0.0210 m.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
The problem explicitly gives the radius of the beam path as . You treated this value as a diameter and divided by , which reduced the radius by half.
- Step 3Correct
You correctly recalled the formula for the charge-to-mass ratio, but this substitution inherited the halved radius from Step 2.
- Step 4Correct
(or using calibrated field geometry)
Because appears squared in the denominator, halving caused your final value to be inflated by a factor of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the magnetic field strength from the Helmholtz coil formula.
You stated the correct algebraic relation linking accelerating voltage, magnetic field, and path radius.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou divided the trajectory dimension by even though the problem statement already specified it as the radius .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIn fine-beam laboratory experiments, mirrored scales often read out diameter (), so students frequently form a habit of dividing any measured path dimension by without verifying whether the prompt provided the radius or the diameter.
REASONING PATH
Your ACEpath teacher’s suggested approach- Parameter Verification
Only divide by when a question specifies the path diameter ; if it specifies radius , use it directly.
Always circle the exact word ('radius' vs. 'diameter') in the prompt before plugging values into centripetal acceleration equations.
CORRECTED PATH
ACEpath Teacher's DemonstrationUse the given radius directly: .
Substitute , , and into .
Evaluate: .
Lock it in
How do you derive the specific charge from an accelerating potential , magnetic field , and orbit radius ?
Equate with to obtain .
Similar question
An electron is accelerated through a potential difference of and enters a uniform magnetic field perpendicular to its velocity. If the circular trajectory has radius , calculate the charge-to-mass ratio .
Answer
Use . Substitute values: .
In a fine-beam tube experiment, an accelerating voltage produces an electron beam path of diameter in a field of . Calculate , taking care with radius versus diameter.
Answer
First find the radius: . Then use .
A proton (, mass ) and an alpha particle (, mass ) are accelerated from rest through the same potential difference and enter the same transverse magnetic field . Find the ratio of the radius of the alpha particle's path to the proton's path, .
Answer
Rearranging gives , so . For the proton, . For the alpha particle, . Therefore, .