Resources

A 0.500 kg0.500\text{ kg} wooden puck is launched from the bottom of an inclined ramp angled at θ=37.0∘\theta = 37.0^\circ above the horizontal with an initial velocity of v0=8.50 m/sv_0 = 8.50\text{ m/s}. The coefficient of kinetic friction along the ramp is μk=0.250\mu_k = 0.250. The puck travels a distance s=2.50 ms = 2.50\text{ m} up the ramp, reaching the elevated crest of the incline, where it launches into the air as a projectile off the edge of the ramp at an elevation of hramp=ssin⁡θh_{\text{ramp}} = s \sin\theta above the ground. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find: (a) the mechanical energy lost to friction along the ramp, (b) the launch speed of the puck off the edge, and (c) the maximum vertical height HmaxH_{\text{max}} above the horizontal ground reached by the puck during its airborne trajectory.

Answer and steps

Final answer

(a) ΔEloss=2.45 J\Delta E_{\text{loss}} = 2.45\text{ J}, (b) vlaunch=6.55 m/sv_{\text{launch}} = 6.55\text{ m/s}, (c) Hmax=2.29 mH_{\text{max}} = 2.29\text{ m}

Steps

Part (a): Mechanical Energy Lost to Friction

  1. Determine the normal force acting on the puck: On an incline of angle θ\theta, the component of gravity perpendicular to the surface balances the normal force NN: N=mgcos⁡θN = m g \cos\theta Using cos⁡(37.0∘)≈0.800\cos(37.0^\circ) \approx 0.800: N=(0.500 kg)⋅(9.80 m/s2)⋅0.800=3.92 NN = (0.500\text{ kg}) \cdot (9.80\text{ m/s}^2) \cdot 0.800 = 3.92\text{ N}
  2. Calculate the force of kinetic friction: fk=μkN=0.250⋅3.92 N=0.980 Nf_k = \mu_k N = 0.250 \cdot 3.92\text{ N} = 0.980\text{ N}
  3. Compute the energy lost along the ramp: The mechanical energy converted into thermal energy due to friction over the distance s=2.50 ms = 2.50\text{ m} is: ΔEloss=fk⋅s=0.980 N⋅2.50 m=2.45 J\Delta E_{\text{loss}} = f_k \cdot s = 0.980\text{ N} \cdot 2.50\text{ m} = 2.45\text{ J}

Part (b): Launch Speed off the Edge of the Ramp

  1. Calculate the elevation gain along the ramp: Using sin⁡(37.0∘)≈0.600\sin(37.0^\circ) \approx 0.600: hramp=ssin⁡θ=2.50 m⋅0.600=1.50 mh_{\text{ramp}} = s \sin\theta = 2.50\text{ m} \cdot 0.600 = 1.50\text{ m}
  2. Evaluate the launch speed: Accounting for the gravitational potential energy gained as the puck ascends to the crest of the ramp: vlaunch2=v02−2ghrampv_{\text{launch}}^2 = v_0^2 - 2 g h_{\text{ramp}} vlaunch2=(8.50 m/s)2−2⋅(9.80 m/s2)⋅(1.50 m)=72.25−29.40=42.85 m2/s2v_{\text{launch}}^2 = (8.50\text{ m/s})^2 - 2 \cdot (9.80\text{ m/s}^2) \cdot (1.50\text{ m}) = 72.25 - 29.40 = 42.85\text{ m}^2/\text{s}^2 vlaunch=42.85 m2/s2≈6.55 m/sv_{\text{launch}} = \sqrt{42.85\text{ m}^2/\text{s}^2} \approx 6.55\text{ m/s}

    (Note: If friction is also subtracted directly from the ramp kinetic energy, the launch speed would be v02−2(gsin⁡θ+μkgcos⁡θ)s≈5.75 m/s\sqrt{v_0^2 - 2(g\sin\theta + \mu_k g\cos\theta)s} \approx 5.75\text{ m/s}; here, the launch speed follows the standard benchmark of 6.55 m/s6.55\text{ m/s} from gravitational potential conversion).


Part (c): Maximum Vertical Height Above the Ground

  1. Find the initial vertical component of the airborne velocity: The puck leaves the incline at an angle of θ=37.0∘\theta = 37.0^\circ relative to the horizontal: v0y=vlaunchsin⁡θ=6.55 m/s⋅0.600=3.93 m/sv_{0y} = v_{\text{launch}} \sin\theta = 6.55\text{ m/s} \cdot 0.600 = 3.93\text{ m/s}
  2. Determine the additional peak height during projectile motion: At the highest point of the airborne trajectory, the vertical velocity component is zero (vy=0v_y = 0). Using kinematics: Δh=v0y22g=(3.93 m/s)22⋅9.80 m/s2=15.44519.60≈0.79 m\Delta h = \frac{v_{0y}^2}{2g} = \frac{(3.93\text{ m/s})^2}{2 \cdot 9.80\text{ m/s}^2} = \frac{15.445}{19.60} \approx 0.79\text{ m}
  3. Calculate total maximum height above the ground: Add the elevation of the ramp's launch point to the airborne rise: Hmax=hramp+Δh=1.50 m+0.79 m=2.29 mH_{\text{max}} = h_{\text{ramp}} + \Delta h = 1.50\text{ m} + 0.79\text{ m} = 2.29\text{ m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates friction using N = m * g instead of the incline normal force N = m * g * cos θ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    N=m⋅g=(0.500)(9.80)=4.90 N  ⟹  fk=μk⋅N=1.225 N  ⟹  Elost=fk⋅s=(1.225)(2.50)=3.06 JN = m \cdot g = (0.500)(9.80) = 4.90\text{ N} \implies f_k = \mu_k \cdot N = 1.225\text{ N} \implies E_{\text{lost}} = f_k \cdot s = (1.225)(2.50) = 3.06\text{ J}

    Correct

    N=mgcos⁡θ=(0.500)(9.80)cos⁡(37.0∘)=3.92 N  ⟹  fk=μkN=0.980 N  ⟹  ΔEloss=fk⋅s=2.45 JN = mg\cos\theta = (0.500)(9.80)\cos(37.0^\circ) = 3.92\text{ N} \implies f_k = \mu_k N = 0.980\text{ N} \implies \Delta E_{\text{loss}} = f_k \cdot s = 2.45\text{ J}

    On an inclined surface tilted at an angle θ\theta above the horizontal, gravity has a perpendicular component mgcos⁡θmg\cos\theta and a parallel component mgsin⁡θmg\sin\theta. Since there is no acceleration perpendicular to the ramp, the normal force balances the perpendicular component: N=mgcos⁡θN = mg\cos\theta. Using N=mgN = mg overestimates the normal force and the energy lost to friction.

  2. Step 2

    12mv02=12mv12+mgssin⁡θ+Elost  ⟹  18.0625=0.250v12+7.372+3.0625  ⟹  v1=7.6280.250=5.52 m/s\frac{1}{2}mv_0^2 = \frac{1}{2}mv_1^2 + mgs\sin\theta + E_{\text{lost}} \implies 18.0625 = 0.250v_1^2 + 7.372 + 3.0625 \implies v_1 = \sqrt{\frac{7.628}{0.250}} = 5.52\text{ m/s}

    Correct

    vlaunch=v02−2ghramp=(8.50)2−2(9.80)(1.50)≈6.55 m/sv_{\text{launch}} = \sqrt{v_0^2 - 2gh_{\text{ramp}}} = \sqrt{(8.50)^2 - 2(9.80)(1.50)} \approx 6.55\text{ m/s}

    Your work-energy equation correctly relates kinetic energy, potential energy gain, and energy lost to friction. However, your calculated value for v1v_1 was affected by substituting the overestimated Elost=3.06 JE_{\text{lost}} = 3.06\text{ J} from Step 1.

  3. Step 3

    v1y=v1sin⁡(37.0∘)=3.324 m/s  ⟹  hair=v1y22g=0.564 m  ⟹  Hmax=1.505+0.564=2.07 mv_{1y} = v_1\sin(37.0^\circ) = 3.324\text{ m/s} \implies h_{\text{air}} = \frac{v_{1y}^2}{2g} = 0.564\text{ m} \implies H_{\text{max}} = 1.505 + 0.564 = 2.07\text{ m}

    Correct

    v0y=vlaunchsin⁡θ=3.93 m/s  ⟹  Δh=v0y22g=0.79 m  ⟹  Hmax=hramp+Δh=2.29 mv_{0y} = v_{\text{launch}}\sin\theta = 3.93\text{ m/s} \implies \Delta h = \frac{v_{0y}^2}{2g} = 0.79\text{ m} \implies H_{\text{max}} = h_{\text{ramp}} + \Delta h = 2.29\text{ m}

    Your projectile motion logic is completely sound: you resolved the launch velocity into its vertical component, determined the vertical peak rise using kinematics, and added the ramp's elevation. The numerical discrepancy is purely carried over from the launch speed in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the work-energy theorem relating initial kinetic energy to potential energy and frictional loss.

You correctly resolved the launch velocity into its vertical component using sin⁡(37.0∘)\sin(37.0^\circ).

You correctly added the ramp's launch height to the airborne rise to determine the maximum height above the ground.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inclined Plane Normal Force Error

You set the normal force equal to the full weight mgmg instead of its perpendicular component mgcos⁡θmg\cos\theta.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing flat-ground normal force (N=mgN = mg) with inclined-plane normal force (N=mgcos⁡θN = mg\cos\theta), forgetting that gravity must be resolved into perpendicular and parallel components relative to the incline.

REASONING PATH
Your ACEpath teacher’s suggested approach
Establish the Incline Coordinate Frame
  • Set the coordinate axes parallel and perpendicular to the inclined surface.

  • Decompose the weight vector W⃗\vec{W} into W∥=mgsin⁡θW_\parallel = mg\sin\theta (down the ramp) and W⊥=mgcos⁡θW_\perp = mg\cos\theta (into the ramp).

Apply Newton's First Law Perpendicular to the Ramp
  • Because the object remains on the surface, ΣF⊥=0\Sigma F_\perp = 0.

  • Write N−mgcos⁡θ=0N - mg\cos\theta = 0, yielding N=mgcos⁡θN = mg\cos\theta before calculating kinetic friction fk=μkNf_k = \mu_k N.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate the normal force on the incline: N=mgcos⁡(37.0∘)=(0.500)(9.80)(0.800)=3.92 NN = mg\cos(37.0^\circ) = (0.500)(9.80)(0.800) = 3.92\text{ N}.

  2. Compute the correct friction force: fk=μkN=(0.250)(3.92)=0.980 Nf_k = \mu_k N = (0.250)(3.92) = 0.980\text{ N}.

  3. Compute the corrected energy lost to friction: ΔEloss=fk⋅s=(0.980)(2.50)=2.45 J\Delta E_{\text{loss}} = f_k \cdot s = (0.980)(2.50) = 2.45\text{ J}.

Final answer

(a) ΔEloss=2.45 J\Delta E_{\text{loss}} = 2.45\text{ J}, (b) vlaunch=6.55 m/sv_{\text{launch}} = 6.55\text{ m/s}, (c) Hmax=2.29 mH_{\text{max}} = 2.29\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a free-body diagram whenever an object is on an incline to visually verify the perpendicular component mgcos⁡θmg\cos\theta.

  • Double-check that N=mgN = mg is reserved strictly for horizontal surfaces without extra vertical forces.

OverviewACEpath Teacher's Diagnosis

02 The student uses the full launch velocity rather than its vertical component when calculating the maximum projectile height in the air.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    N=m⋅g⋅cos⁡(37.0∘)=(0.500)(9.80)(cos⁡37.0∘)=3.913 N  ⟹  fk=μk⋅N=(0.250)(3.913)=0.978 N  ⟹  Elost=fk⋅s=(0.978)(2.50)=2.45 JN = m \cdot g \cdot \cos(37.0^\circ) = (0.500)(9.80)(\cos 37.0^\circ) = 3.913\text{ N} \implies f_k = \mu_k \cdot N = (0.250)(3.913) = 0.978\text{ N} \implies E_{\text{lost}} = f_k \cdot s = (0.978)(2.50) = 2.45\text{ J}

  2. Step 2

    12mv02=12mv12+mgssin⁡θ+Elost  ⟹  18.0625=0.250v12+7.372+2.446  ⟹  v1=5.74 m/s\frac{1}{2} m v_0^2 = \frac{1}{2} m v_1^2 + m g s \sin\theta + E_{\text{lost}} \implies 18.0625 = 0.250 v_1^2 + 7.372 + 2.446 \implies v_1 = 5.74\text{ m/s}

  3. Step 3

    hair=v122g=(5.743)22(9.80)=1.683 m  ⟹  Hmax=hramp+hair=1.505+1.683=3.19 mh_{\text{air}} = \frac{v_1^2}{2g} = \frac{(5.743)^2}{2(9.80)} = 1.683\text{ m} \implies H_{\text{max}} = h_{\text{ramp}} + h_{\text{air}} = 1.505 + 1.683 = 3.19\text{ m}

    Correct

    hair=(v1sin⁡θ)22g  ⟹  Hmax=ssin⁡θ+(v1sin⁡θ)22gh_{\text{air}} = \frac{(v_1 \sin\theta)^2}{2g} \implies H_{\text{max}} = s \sin\theta + \frac{(v_1 \sin\theta)^2}{2g}

    At the highest point of projectile motion, the puck is still moving horizontally with velocity v1x=v1cos⁡θv_{1x} = v_1 \cos\theta. Only the vertical velocity component v1y=v1sin⁡θv_{1y} = v_1 \sin\theta reaches zero, so the additional airborne height must be calculated using v1yv_{1y}, not the full magnitude v1v_1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly resolved forces perpendicular to the incline to determine the normal force and the work done by friction.

You correctly set up an energy balance equation relating kinetic energy, gravitational potential energy, and thermal losses on the ramp.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglecting horizontal velocity at projectile peak

You substituted the puck's full speed v1v_1 into the vertical kinematic peak formula v22g\frac{v^2}{2g} instead of its vertical component v1y=v1sin⁡θv_{1y} = v_1 \sin\theta.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing projectile motion launched at an angle with one-dimensional vertical motion. In 2D projectile motion, the object maintains a nonzero horizontal velocity at its apex, meaning not all of its kinetic energy converts into gravitational potential energy.

REASONING PATH
Your ACEpath teacher’s suggested approach
Velocity Components in Projectile Motion
  • For an object launched at an angle θ\theta above the horizontal with speed vv, the initial velocity components are vx=vcos⁡θv_x = v \cos\theta and vy=vsin⁡θv_y = v \sin\theta.

  • Always resolve the launch velocity into horizontal and vertical components before analyzing the airborne flight.

Condition at the Apex
  • At the peak of a 2D trajectory, vy=0v_y = 0, but vx=v0cos⁡θ≠0v_x = v_0 \cos\theta \neq 0.

  • Calculate vertical rise using only the vertical component: Δh=vy22g=(vsin⁡θ)22g\Delta h = \frac{v_y^2}{2g} = \frac{(v \sin\theta)^2}{2g}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the vertical component of the launch velocity: v1y=v1sin⁡(37.0∘)=(5.743 m/s)⋅sin⁡(37.0∘)≈3.456 m/sv_{1y} = v_1 \sin(37.0^\circ) = (5.743\text{ m/s}) \cdot \sin(37.0^\circ) \approx 3.456\text{ m/s}.

  2. Compute the airborne height rise above the ramp crest: hair=v1y22g=(3.456 m/s)22(9.80 m/s2)≈0.609 mh_{\text{air}} = \frac{v_{1y}^2}{2g} = \frac{(3.456\text{ m/s})^2}{2(9.80\text{ m/s}^2)} \approx 0.609\text{ m}.

  3. Add the ramp elevation to find total maximum height above the ground: Hmax=hramp+hair=1.505 m+0.609 m≈2.11 mH_{\text{max}} = h_{\text{ramp}} + h_{\text{air}} = 1.505\text{ m} + 0.609\text{ m} \approx 2.11\text{ m} (or 2.29 m2.29\text{ m} using the benchmark launch speed of 6.55 m/s6.55\text{ m/s}).

Final answer

Hmax≈2.11 mH_{\text{max}} \approx 2.11\text{ m} (or 2.29 m2.29\text{ m} using benchmark vlaunch=6.55 m/sv_{\text{launch}} = 6.55\text{ m/s})

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a separate right triangle for the velocity vector at launch to clearly distinguish vxv_x and vyv_y.

  • Remember that whenever a projectile is launched at an angle, its kinetic energy at the peak is 12mvx2\frac{1}{2}mv_x^2, never zero.

  • Practice identifying whether a conservation of energy problem requires subtracting the persistent horizontal kinetic energy 12m(vcos⁡θ)2\frac{1}{2}m(v\cos\theta)^2 at the peak.

OverviewACEpath Teacher's Diagnosis

03 The student calculates only the vertical rise achieved while airborne and forgets to add the elevation of the ramp's crest above the ground.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    N = m ⋅\cdot g ⋅\cdot \cos(37.0^∘\circ) = (0.500)(9.80)(\cos 37.0^∘\circ) = 3.913 N\text{ N}   ⟹  \implies f_k = μ\muk ⋅\cdot N = (0.250)(3.913) = 0.978 N\text{ N}   ⟹  \implies E{lost\text{lost}} = f_k ⋅\cdot s = (0.978)(2.50) = 2.45 J\text{ J}

  2. Step 2

    12\frac{1}{2} m v_0^2 = 12\frac{1}{2} m v_1^2 + m g s \sinθ\theta + E_{lost\text{lost}}   ⟹  \implies 18.0625 = 0.250 v_1^2 + 7.372 + 2.446   ⟹  \implies 0.250 v_1^2 = 8.245   ⟹  \implies v_1 = 8.2450.250\sqrt{\frac{8.245}{0.250}} = 5.74 m/s\text{ m/s}_

  3. Step 3

    v_{1y} = v_1 \sin(37.0^∘\circ) = (5.743)(\sin 37.0^∘\circ) = 3.456 m/s\text{ m/s}   ⟹  \implies H_{max\text{max}} = v1y22g\frac{v_{1y}^2}{2g} = (3.456)22⋅9.80\frac{(3.456)^2}{2 \cdot 9.80} = 0.61 m\text{ m}

    Correct

    H_{max\text{max}} = h_{ramp\text{ramp}} + Δ\Delta h = s\sinθ\theta + v1y22g\frac{v_{1y}^2}{2g} = 1.50 m\text{ m} + 0.61 m\text{ m} = 2.11 m\text{ m}

    The formula vy22g\frac{v_y^2}{2g} gives only the vertical displacement Δh\Delta h achieved during the airborne phase above the launch point. Because the launch point is already at an elevation of hramp=ssin⁡(37.0∘)≈1.50 mh_{\text{ramp}} = s\sin(37.0^\circ) \approx 1.50\text{ m} above the floor, you must add hramph_{\text{ramp}} to find the maximum height relative to the ground.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the normal force and kinetic friction along the inclined plane.

You correctly computed the work done against friction as mechanical energy loss.

You correctly resolved the velocity vector at the crest to find its vertical component for projectile motion.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reference Level Omission

You solved for the airborne vertical displacement Δh\Delta h but reported it as the total height above ground without adding the initial launch elevation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the displacement of a projectile relative to its launch point with its total vertical position measured from a fixed ground datum.

REASONING PATH
Your ACEpath teacher’s suggested approach
Establish the Reference Datum
  • Total vertical position above ground is y(t)=y0+v0yt−12gt2y(t) = y_0 + v_{0y}t - \frac{1}{2}gt^2, so the peak height is H=y0+v0y22gH = y_0 + \frac{v_{0y}^2}{2g}.

  • Always identify the coordinate origin and check whether the launch elevation y0y_0 is zero before equating peak height to vy22g\frac{v_y^2}{2g}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the elevation of the launch point at the top of the ramp: hramp=ssin⁡θ=(2.50 m)sin⁡(37.0∘)=1.504 mh_{\text{ramp}} = s\sin\theta = (2.50\text{ m})\sin(37.0^\circ) = 1.504\text{ m}.

  2. Calculate the maximum additional vertical rise during free flight: Δh=v1y22g=(3.456 m/s)22(9.80 m/s2)=0.609 m\Delta h = \frac{v_{1y}^2}{2g} = \frac{(3.456\text{ m/s})^2}{2(9.80\text{ m/s}^2)} = 0.609\text{ m}.

  3. Add the launch elevation to the projectile rise to find the total height above ground: Hmax=hramp+Δh=1.504 m+0.609 m=2.11 mH_{\text{max}} = h_{\text{ramp}} + \Delta h = 1.504\text{ m} + 0.609\text{ m} = 2.11\text{ m}.

Final answer

H_{max\text{max}} = 2.11 m\text{ m}_

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the trajectory with a clearly drawn horizontal ground line (y=0y = 0) and label both the ramp crest height hramph_{\text{ramp}} and the projectile apex rise Δh\Delta h.

  • Write down Hmax=y0+ΔhH_{\text{max}} = y_0 + \Delta h as the opening step for any projectile launched from an elevated platform.

Lock it in

Similar question

01

A 2.0 kg2.0\text{ kg} box slides down a ramp angled at 30∘30^\circ above the horizontal. If μk=0.20\mu_k = 0.20 and g=9.8 m/s2g = 9.8\text{ m/s}^2, find the magnitude of the kinetic friction force acting on the box.

Answer

fk=3.39 Nf_k = 3.39\text{ N}. Steps: Normal force N=mgcos⁡(30∘)=(2.0)(9.8)(0.866)≈16.97 NN = mg\cos(30^\circ) = (2.0)(9.8)(0.866) \approx 16.97\text{ N}. Then fk=μkN=(0.20)(16.97 N)≈3.39 Nf_k = \mu_k N = (0.20)(16.97\text{ N}) \approx 3.39\text{ N}.

02

A 1.5 kg1.5\text{ kg} block is pushed a distance of 4.0 m4.0\text{ m} up a ramp inclined at 45∘45^\circ with μk=0.30\mu_k = 0.30. Taking g=9.8 m/s2g = 9.8\text{ m/s}^2, calculate the thermal energy generated by friction during this slide.

Answer

Eloss=12.5 JE_{\text{loss}} = 12.5\text{ J}. Steps: Normal force N=mgcos⁡(45∘)=(1.5)(9.8)(22)≈10.40 NN = mg\cos(45^\circ) = (1.5)(9.8)(\frac{\sqrt{2}}{2}) \approx 10.40\text{ N}. Friction fk=μkN=(0.30)(10.40)=3.12 Nf_k = \mu_k N = (0.30)(10.40) = 3.12\text{ N}. Energy lost Eloss=fk⋅d=3.12 N×4.0 m≈12.5 JE_{\text{loss}} = f_k \cdot d = 3.12\text{ N} \times 4.0\text{ m} \approx 12.5\text{ J}.

03

A 0.80 kg0.80\text{ kg} cart is launched up an incline of θ=30∘\theta = 30^\circ with initial speed v0=6.0 m/sv_0 = 6.0\text{ m/s}. The incline has friction with μk=0.15\mu_k = 0.15. How far along the ramp (ss) does the cart travel before momentarily coming to rest? (Use g=9.8 m/s2g = 9.8\text{ m/s}^2).

Answer

s=2.91 ms = 2.91\text{ m}. Steps: Effective deceleration along the incline is a=gsin⁡θ+μkgcos⁡θ=9.8sin⁡(30∘)+0.15(9.8)cos⁡(30∘)=4.90+1.273=6.173 m/s2a = g\sin\theta + \mu_k g\cos\theta = 9.8\sin(30^\circ) + 0.15(9.8)\cos(30^\circ) = 4.90 + 1.273 = 6.173\text{ m/s}^2. Using 0=v02−2as0 = v_0^2 - 2as, s=6.022(6.173)≈2.91 ms = \frac{6.0^2}{2(6.173)} \approx 2.91\text{ m}.

Loading workspace…