Resources

An engineering system cools a hot metal sphere by submerging it in a very large reservoir of water at Tres=20.0∘CT_{\text{res}} = 20.0^\circ\text{C}. The metal sphere has a mass of m=0.500 kgm = 0.500\text{ kg}, specific heat capacity cm=450 J/(kg⋅∘C)c_m = 450\text{ J}/(\text{kg}\cdot^\circ\text{C}), and initial temperature Ti=400.0∘CT_i = 400.0^\circ\text{C}. (a) Express the final equilibrium temperature TfT_f in the asymptotic limit as the mass of the reservoir water approaches infinity (Mres→∞M_{\text{res}} \to \infty). (b) Calculate the total heat ∣Q∣|Q| transferred from the sphere to the reservoir in this limit. (c) If instead the reservoir has a finite mass of M=250 kgM = 250\text{ kg} (cw=4186 J/(kg⋅∘C)c_{\text{w}} = 4186\text{ J}/(\text{kg}\cdot^\circ\text{C})), calculate the exact deviation of the final equilibrium temperature from TresT_{\text{res}}, defined as δT=Tf−Tres\delta T = T_f - T_{\text{res}}.

Answer and steps

Final answer

(a) lim⁡Mres→∞Tf=20.0∘C\lim_{M_{\text{res}} \to \infty} T_f = 20.0^\circ\text{C}; (b) ∣Q∣=8.55×104 J|Q| = 8.55 \times 10^4\text{ J}; (c) δT=0.0817∘C\delta T = 0.0817^\circ\text{C}

Steps

Part (a): Equilibrium Temperature as Mres→∞M_{\text{res}} \to \infty

By the principle of conservation of energy in an isolated system, the heat lost by the metal sphere equals the heat gained by the water reservoir:

Qlost=QgainedQ_{\text{lost}} = Q_{\text{gained}}

mcm(Ti−Tf)=Mrescw(Tf−Tres)m c_m (T_i - T_f) = M_{\text{res}} c_w (T_f - T_{\text{res}})

Solving for the final equilibrium temperature TfT_f:

Tf=mcmTi+MrescwTresmcm+MrescwT_f = \frac{m c_m T_i + M_{\text{res}} c_w T_{\text{res}}}{m c_m + M_{\text{res}} c_w}

Dividing the numerator and denominator by MrescwM_{\text{res}} c_w:

Tf=mcmMrescwTi+TresmcmMrescw+1T_f = \frac{\frac{m c_m}{M_{\text{res}} c_w} T_i + T_{\text{res}}}{\frac{m c_m}{M_{\text{res}} c_w} + 1}

Taking the limit as the mass of the reservoir approaches infinity (Mres→∞M_{\text{res}} \to \infty):

lim⁡Mres→∞mcmMrescw=0\lim_{M_{\text{res}} \to \infty} \frac{m c_m}{M_{\text{res}} c_w} = 0

lim⁡Mres→∞Tf=Tres=20.0∘C\lim_{M_{\text{res}} \to \infty} T_f = T_{\text{res}} = 20.0^\circ\text{C}

An infinite thermal reservoir possesses an effectively infinite heat capacity, meaning its temperature remains completely unchanged when absorbing a finite amount of heat.


Part (b): Total Heat Transferred in the Infinite Limit

Because the final temperature of the sphere reaches Tf=20.0∘CT_f = 20.0^\circ\text{C}, the magnitude of the thermal energy transferred from the sphere is:

∣Q∣=mcm(Ti−Tf)|Q| = m c_m (T_i - T_f)

Substitute the given numerical values:

∣Q∣=(0.500 kg)⋅(450 J/(kg⋅∘C))⋅(400.0∘C−20.0∘C)|Q| = (0.500\text{ kg}) \cdot \left(450\text{ J}/(\text{kg}\cdot^\circ\text{C})\right) \cdot (400.0^\circ\text{C} - 20.0^\circ\text{C})

∣Q∣=225 J/∘C⋅380.0∘C=85 500 J=8.55×104 J|Q| = 225\text{ J}/^\circ\text{C} \cdot 380.0^\circ\text{C} = 85\,500\text{ J} = 8.55 \times 10^4\text{ J}


Part (c): Exact Temperature Deviation for a Finite Mass

When the water reservoir has a finite mass M=250 kgM = 250\text{ kg}, the final equilibrium temperature TfT_f slightly exceeds TresT_{\text{res}}. We define the temperature deviation as:

δT=Tf−Tres\delta T = T_f - T_{\text{res}}

From this definition, the sphere's temperature drop is:

Ti−Tf=(Ti−Tres)−δTT_i - T_f = (T_i - T_{\text{res}}) - \delta T

Setting the heat lost by the sphere equal to the heat gained by the water:

mcm[(Ti−Tres)−δT]=McwδTm c_m \left[(T_i - T_{\text{res}}) - \delta T\right] = M c_w \delta T

Expanding and rearranging terms to isolate δT\delta T:

mcm(Ti−Tres)=(Mcw+mcm)δTm c_m (T_i - T_{\text{res}}) = (M c_w + m c_m) \delta T

δT=mcm(Ti−Tres)Mcw+mcm\delta T = \frac{m c_m (T_i - T_{\text{res}})}{M c_w + m c_m}

Now compute the heat capacities of both components:

  • Sphere: Csphere=mcm=0.500 kg⋅450 J/(kg⋅∘C)=225 J/∘CC_{\text{sphere}} = m c_m = 0.500\text{ kg} \cdot 450\text{ J}/(\text{kg}\cdot^\circ\text{C}) = 225\text{ J}/^\circ\text{C}
  • Water: Cwater=Mcw=250 kg⋅4186 J/(kg⋅∘C)=1 046 500 J/∘CC_{\text{water}} = M c_w = 250\text{ kg} \cdot 4186\text{ J}/(\text{kg}\cdot^\circ\text{C}) = 1\,046\,500\text{ J}/^\circ\text{C}

Substitute these values into the expression for δT\delta T:

δT=225 J/∘C⋅(400.0∘C−20.0∘C)1 046 500 J/∘C+225 J/∘C\delta T = \frac{225\text{ J}/^\circ\text{C} \cdot (400.0^\circ\text{C} - 20.0^\circ\text{C})}{1\,046\,500\text{ J}/^\circ\text{C} + 225\text{ J}/^\circ\text{C}}

δT=85 5001 046 725≈0.08168∘C≈0.0817∘C\delta T = \frac{85\,500}{1\,046\,725} \approx 0.08168^\circ\text{C} \approx 0.0817^\circ\text{C}

Pitfall check: Neglecting the heat capacity of the sphere in the denominator (McwM c_w alone instead of Mcw+mcmM c_w + m c_m) gives an approximation rather than the exact deviation; including both ensures energy is strictly conserved between the two interacting bodies.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the final equilibrium temperature as the simple arithmetic average of the initial temperatures, ignoring thermal mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Tf=Ti+Tres2  ⟹  Tf=400.0+20.02=210.0∘CT_f = \frac{T_i + T_{\text{res}}}{2} \implies T_f = \frac{400.0 + 20.0}{2} = 210.0^\circ\text{C}

    Correct

    lim⁡Mres→∞Tf=Tres=20.0∘C\lim_{M_{\text{res}} \to \infty} T_f = T_{\text{res}} = 20.0^\circ\text{C}

    A simple arithmetic mean only applies when two identical objects with equal heat capacities reach equilibrium. Because the reservoir mass approaches infinity (Mres→∞M_{\text{res}} \to \infty), its thermal capacity is effectively infinite, meaning its temperature does not change.

  2. Step 2

    ∣Q∣=mcm(Ti−Tf)  ⟹  ∣Q∣=(0.500)(450)(400.0−210.0)=42750 J|Q| = m c_m (T_i - T_f) \implies |Q| = (0.500)(450)(400.0 - 210.0) = 42750\text{ J}

    Correct

    ∣Q∣=mcm(Ti−Tf)=(0.500 kg)(450 J/(kg⋅∘C))(400.0∘C−20.0∘C)=85 500 J|Q| = m c_m (T_i - T_f) = (0.500\text{ kg})(450\text{ J}/(\text{kg}\cdot^\circ\text{C}))(400.0^\circ\text{C} - 20.0^\circ\text{C}) = 85\,500\text{ J}

    Your heat transfer equation is correct, but the calculated value was affected by substituting the incorrect final temperature of 210.0∘C210.0^\circ\text{C} instead of 20.0∘C20.0^\circ\text{C}.

  3. Step 3

    mcm(Ti−Tf)=Mcw(Tf−Tres)  ⟹  δT=Tf−Tres=mcm(Ti−Tres)mcm+Mcw  ⟹  δT=855001046725≈0.0817∘Cm c_m (T_i - T_f) = M c_w (T_f - T_{\text{res}}) \implies \delta T = T_f - T_{\text{res}} = \frac{m c_m (T_i - T_{\text{res}})}{m c_m + M c_w} \implies \delta T = \frac{85500}{1046725} \approx 0.0817^\circ\text{C}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the heat conservation equation Qlost=QgainedQ_{\text{lost}} = Q_{\text{gained}} for the finite mass case in part (c).

You accurately derived the algebraic formula for the temperature shift δT\delta T.

You computed the correct heat capacities and numerical result for part (c).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Arithmetic mean used instead of thermal capacity weighting

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed two interacting thermal bodies reach the midpoint temperature T1+T22\frac{T_1 + T_2}{2}, overlooking that equilibrium temperature is weighted by heat capacity C=mcC = m c, and that an infinite thermal reservoir maintains a constant temperature.

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermal Reservoir Definition
  • A thermal reservoir has C→∞C \to \infty, so absorbing or releasing any finite quantity of heat produces zero temperature change: ΔT=QC→0\Delta T = \frac{Q}{C} \to 0.

  • Whenever a problem specifies a 'very large reservoir' or M→∞M \to \infty, set the asymptotic equilibrium temperature directly equal to the reservoir's initial temperature.

Weighted Equilibrium Temperature
  • In general, Tf=m1c1T1+m2c2T2m1c1+m2c2T_f = \frac{m_1 c_1 T_1 + m_2 c_2 T_2}{m_1 c_1 + m_2 c_2}, which only simplifies to T1+T22\frac{T_1 + T_2}{2} when m1c1=m2c2m_1 c_1 = m_2 c_2.

  • Always weight temperatures by their respective heat capacities rather than taking an unweighted arithmetic average.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that as Mres→∞M_{\text{res}} \to \infty, the reservoir's heat capacity Cres=Mrescw→∞C_{\text{res}} = M_{\text{res}} c_w \to \infty.

  2. Evaluate the limit of equilibrium temperature: Tf=lim⁡Mres→∞mcmTi+MrescwTresmcm+Mrescw=Tres=20.0∘CT_f = \lim_{M_{\text{res}} \to \infty} \frac{m c_m T_i + M_{\text{res}} c_w T_{\text{res}}}{m c_m + M_{\text{res}} c_w} = T_{\text{res}} = 20.0^\circ\text{C}.

  3. Substitute Tf=20.0∘CT_f = 20.0^\circ\text{C} into ∣Q∣=mcm(Ti−Tf)=(0.500)(450)(400.0−20.0)=85 500 J=8.55×104 J|Q| = m c_m (T_i - T_f) = (0.500)(450)(400.0 - 20.0) = 85\,500\text{ J} = 8.55 \times 10^4\text{ J}.

Final answer

(a) 20.0∘C20.0^\circ\text{C}; (b) 8.55×104 J8.55 \times 10^4\text{ J}; (c) 0.0817∘C0.0817^\circ\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the formal definition of an ideal thermal reservoir in thermodynamics.

  • Practice finding weighted equilibrium temperatures when heat capacities are unequal.

  • Notice that your own correct formula in part (c) confirms part (a): setting M→∞M \to \infty in δT=mcm(Ti−Tres)mcm+Mcw\delta T = \frac{m c_m (T_i - T_{\text{res}})}{m c_m + M c_w} immediately gives δT=0\delta T = 0, meaning Tf=TresT_f = T_{\text{res}}.

OverviewACEpath Teacher's Diagnosis

02 The student omits the sphere's heat capacity from the denominator of the energy balance equation in part (c), approximating Tf - Tres as |Q| / (M cw).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Tf=Tres=20.0∘CT_f = T_{\text{res}} = 20.0^\circ\text{C}

  2. Step 2

    ∣Q∣=mcm(Ti−Tf)  ⟹  ∣Q∣=(0.500)(450)(400.0−20.0)=85500 J|Q| = m c_m (T_i - T_f) \implies |Q| = (0.500)(450)(400.0 - 20.0) = 85500\text{ J}

  3. Step 3

    δT=∣Q∣Mcw  ⟹  δT=85500250×4186  ⟹  δT=855001046500≈0.08170∘C\delta T = \frac{|Q|}{M c_w} \implies \delta T = \frac{85500}{250 \times 4186} \implies \delta T = \frac{85500}{1046500} \approx 0.08170^\circ\text{C}

    Correct

    δT=mcm(Ti−Tres)Mcw+mcm=855001046725≈0.0817∘C\delta T = \frac{m c_m (T_i - T_{\text{res}})}{M c_w + m c_m} = \frac{85500}{1046725} \approx 0.0817^\circ\text{C}

    You used the heat transferred from part (b) as if the sphere still cooled to 20.0∘C20.0^\circ\text{C}. In a finite system, the sphere and water reach a common final temperature Tf=Tres+δTT_f = T_{\text{res}} + \delta T, so the heat lost is mcm(Ti−Tres−δT)=McwδTm c_m (T_i - T_{\text{res}} - \delta T) = M c_w \delta T. Solving for δT\delta T requires including the sphere's heat capacity mcmm c_m in the denominator alongside McwM c_w.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the reservoir's temperature remains unchanged in the infinite limit.

You correctly calculated the heat transfer in part (b) using the proper specific heat and temperature difference.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted object heat capacity in finite calorimeter balance

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the heat released by the sphere as fixed at the infinite-reservoir value rather than coupling the final temperature of both bodies in the energy conservation equation Qlost=QgainedQ_{\text{lost}} = Q_{\text{gained}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Equilibrium Condition
  • Both interacting bodies reach the exact same final temperature: Tf,sphere=Tf,water=Tres+δTT_{f,\text{sphere}} = T_{f,\text{water}} = T_{\text{res}} + \delta T.

  • Always write the temperature change of the hot object in terms of the unknown final temperature or deviation: ΔThot=Ti−(Tres+δT)\Delta T_{\text{hot}} = T_i - (T_{\text{res}} + \delta T).

Exact Energy Balance Denominator
  • For an isolated two-body system, δT=C1(T1−T2)C1+C2\delta T = \frac{C_1 (T_1 - T_2)}{C_1 + C_2}, where Ci=miciC_i = m_i c_i.

  • Include the thermal mass of all components in the denominator so that total energy is strictly conserved.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express energy conservation between the sphere and the water: mcm(Ti−Tf)=Mcw(Tf−Tres)m c_m (T_i - T_f) = M c_w (T_f - T_{\text{res}}).

  2. Substitute Tf=Tres+δTT_f = T_{\text{res}} + \delta T: mcm[(Ti−Tres)−δT]=McwδTm c_m [(T_i - T_{\text{res}}) - \delta T] = M c_w \delta T.

  3. Rearrange to solve for δT\delta T: δT=mcm(Ti−Tres)Mcw+mcm\delta T = \frac{m c_m (T_i - T_{\text{res}})}{M c_w + m c_m}.

  4. Compute the numerical values: Csphere=0.500×450=225 J/∘CC_{\text{sphere}} = 0.500 \times 450 = 225\text{ J}/^\circ\text{C} and Cwater=250×4186=1 046 500 J/∘CC_{\text{water}} = 250 \times 4186 = 1\,046\,500\text{ J}/^\circ\text{C}.

  5. Evaluate the fraction: δT=225×380.01 046 500+225=85 5001 046 725≈0.08168∘C\delta T = \frac{225 \times 380.0}{1\,046\,500 + 225} = \frac{85\,500}{1\,046\,725} \approx 0.08168^\circ\text{C}.

Final answer

δT≈0.0817∘C\delta T \approx 0.0817^\circ\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the full conservation equation m1c1(T1−Tf)=m2c2(Tf−T2)m_1 c_1 (T_1 - T_f) = m_2 c_2 (T_f - T_2) before making any approximations.

  • Verify whether a problem requests an exact expression or an approximation before discarding smaller thermal capacities in the denominator.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the specific heat capacity of the metal with that of water when calculating the heat released by the metal sphere in part (b).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Tf=20.0 ∘CT_f = 20.0\text{ }^\circ\text{C}

  2. Step 2

    ∣Q∣=mcw(Ti−Tf)  ⟹  ∣Q∣=(0.500)(4186)(400.0−20.0)=795340 J|Q| = m c_w (T_i - T_f) \implies |Q| = (0.500)(4186)(400.0 - 20.0) = 795340\text{ J}

    Correct

    ∣Q∣=mcm(Ti−Tf)=(0.500 kg)(450 J/(kg⋅∘C))(400.0∘C−20.0∘C)=8.55×104 J|Q| = m c_m (T_i - T_f) = (0.500\text{ kg})(450\text{ J}/(\text{kg}\cdot^\circ\text{C}))(400.0^\circ\text{C} - 20.0^\circ\text{C}) = 8.55 \times 10^4\text{ J}

    You calculated the heat released by the metal sphere using the specific heat capacity of water (4186 J/(kg⋅∘C)4186\text{ J}/(\text{kg}\cdot^\circ\text{C})) rather than the metal (450 J/(kg⋅∘C)450\text{ J}/(\text{kg}\cdot^\circ\text{C})).

  3. Step 3

    δT=mcm(Ti−Tres)mcm+Mcw  ⟹  δT=855001046725≈0.0817 ∘C\delta T = \frac{m c_m (T_i - T_{\text{res}})}{m c_m + M c_w} \implies \delta T = \frac{85500}{1046725} \approx 0.0817\text{ }^\circ\text{C}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that an infinite thermal reservoir maintains a constant temperature.

You set up the exact two-body thermal conservation equation in part (c) without omitting the heat capacity of the sphere.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Specific heat property mismatch

You swapped the material property of the sphere (cmc_m) with that of the surrounding fluid (cwc_w) when calculating the sphere's thermal energy release.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When calculating heat transferred from an object using Q=mcΔTQ = m c \Delta T, the specific heat capacity cc must belong to the substance whose mass and temperature change are being tracked, not the surrounding medium.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Property to Object
  • For thermal energy exchange, Q=mcΔTQ = m c \Delta T requires mm and cc to describe the exact same body.

  • Before evaluating the numerical product, label the parameters explicitly with subscripts (e.g., mspherem_{\text{sphere}} and cmetalc_{\text{metal}}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the formula for heat lost by the metal sphere: ∣Q∣=mcm(Ti−Tf)|Q| = m c_m (T_i - T_f)

  2. Substitute the sphere's parameters: m=0.500 kgm = 0.500\text{ kg}, cm=450 J/(kg⋅∘C)c_m = 450\text{ J}/(\text{kg}\cdot^\circ\text{C}), and ΔT=400.0∘C−20.0∘C=380.0∘C\Delta T = 400.0^\circ\text{C} - 20.0^\circ\text{C} = 380.0^\circ\text{C}

  3. Multiply the terms: ∣Q∣=0.500×450×380.0=85 500 J=8.55×104 J|Q| = 0.500 \times 450 \times 380.0 = 85\,500\text{ J} = 8.55 \times 10^4\text{ J}

Final answer

∣Q∣=8.55×104 J|Q| = 8.55 \times 10^4\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check your variable subscripts against the problem statement before computing numerical values to prevent property swapping.

Lock it in

Similar question

01

A 0.200 kg0.200\text{ kg} copper slug (c=385 J/(kg⋅∘C)c = 385\text{ J}/(\text{kg}\cdot^\circ\text{C})) at 180.0∘C180.0^\circ\text{C} is quenched in an enormous lake whose temperature is uniformly 10.0∘C10.0^\circ\text{C}. Determine the final temperature of the copper slug and the total heat transferred to the lake.

Answer

Since the lake is an effectively infinite reservoir, the final temperature is Tf=10.0∘CT_f = 10.0^\circ\text{C}. The total heat transferred is ∣Q∣=mc(Ti−Tf)=(0.200 kg)(385 J/(kg⋅∘C))(180.0∘C−10.0∘C)=13 090 J≈1.31×104 J|Q| = m c (T_i - T_f) = (0.200\text{ kg})(385\text{ J}/(\text{kg}\cdot^\circ\text{C}))(180.0^\circ\text{C} - 10.0^\circ\text{C}) = 13\,090\text{ J} \approx 1.31 \times 10^4\text{ J}.

02

Two blocks, A and B, are placed in thermal contact in an isolated container. Block A has mass mA=1.0 kgm_A = 1.0\text{ kg}, specific heat cA=900 J/(kg⋅∘C)c_A = 900\text{ J}/(\text{kg}\cdot^\circ\text{C}), and TA=80∘CT_A = 80^\circ\text{C}. Block B has mass mB=3.0 kgm_B = 3.0\text{ kg}, specific heat cB=300 J/(kg⋅∘C)c_B = 300\text{ J}/(\text{kg}\cdot^\circ\text{C}), and TB=20∘CT_B = 20^\circ\text{C}. Calculate the final equilibrium temperature TfT_f.

Answer

Compute thermal capacities: CA=(1.0)(900)=900 J/∘CC_A = (1.0)(900) = 900\text{ J}/^\circ\text{C} and CB=(3.0)(300)=900 J/∘CC_B = (3.0)(300) = 900\text{ J}/^\circ\text{C}. Because CA=CBC_A = C_B, the equilibrium temperature is the exact midpoint: Tf=CATA+CBTBCA+CB=80∘C+20∘C2=50∘CT_f = \frac{C_A T_A + C_B T_B}{C_A + C_B} = \frac{80^\circ\text{C} + 20^\circ\text{C}}{2} = 50^\circ\text{C}.

03

A 2.00 kg2.00\text{ kg} block of iron (cFe=450 J/(kg⋅∘C)c_{\text{Fe}} = 450\text{ J}/(\text{kg}\cdot^\circ\text{C})) at 300.0∘C300.0^\circ\text{C} is placed into an insulated tank containing 50.0 kg50.0\text{ kg} of water (cw=4186 J/(kg⋅∘C)c_w = 4186\text{ J}/(\text{kg}\cdot^\circ\text{C})) at 20.0∘C20.0^\circ\text{C}. (a) Calculate the final equilibrium temperature TfT_f. (b) By how much does the reservoir water's temperature rise?

Answer

(a) Ciron=2.00×450=900 J/∘CC_{\text{iron}} = 2.00 \times 450 = 900\text{ J}/^\circ\text{C}, Cwater=50.0×4186=209 300 J/∘CC_{\text{water}} = 50.0 \times 4186 = 209\,300\text{ J}/^\circ\text{C}. Tf=CironTiron+CwaterTwaterCiron+Cwater=900(300.0)+209 300(20.0)900+209 300=4 456 000210 200≈21.20∘CT_f = \frac{C_{\text{iron}} T_{\text{iron}} + C_{\text{water}} T_{\text{water}}}{C_{\text{iron}} + C_{\text{water}}} = \frac{900(300.0) + 209\,300(20.0)}{900 + 209\,300} = \frac{4\,456\,000}{210\,200} \approx 21.20^\circ\text{C}. (b) The temperature rise of the water is ΔTw=Tf−20.0∘C≈1.20∘C\Delta T_w = T_f - 20.0^\circ\text{C} \approx 1.20^\circ\text{C}.

Loading workspace…