Resources

A crash-test dummy of mass 75.0 kg75.0\text{ kg} inside a test vehicle collides with a barrier. A deployable airbag deploys and exerts a time-varying horizontal stopping force Fx(t)=−Fmaxsin⁡(πtT)F_x(t) = -F_{\text{max}} \sin\left(\frac{\pi t}{T}\right) over the impact duration T=80.0 msT = 80.0\text{ ms} (from t=0t = 0 to t=Tt = T). The collision brings the dummy from its initial forward velocity v0v_0 to a complete stop (vf=0v_f = 0). High-speed sensor telemetry records a peak deceleration force of Fmax=3.20×104 NF_{\text{max}} = 3.20 \times 10^4\text{ N}. Using the impulse-momentum theorem, reverse-engineer the initial velocity v0v_0 of the dummy just prior to impact.

Answer and steps

Final answer

v0=21.7 m/sv_0 = 21.7\text{ m/s} (in the forward direction).

Steps

01

The Impulse-Momentum Theorem

According to the impulse-momentum theorem, the net impulse JxJ_x delivered to an object equals its change in linear momentum Δpx\Delta p_x:

Jx=∫0TFx(t) dt=Δpx=mvf−mv0J_x = \int_0^T F_x(t) \, dt = \Delta p_x = m v_f - m v_0

Since the dummy comes to a complete rest, vf=0 m/sv_f = 0\text{ m/s}:

Δpx=0−mv0=−mv0\Delta p_x = 0 - m v_0 = -m v_0


02

Calculate the Total Impulse

The horizontal stopping force is given by Fx(t)=−Fmaxsin⁡(πtT)F_x(t) = -F_{\text{max}} \sin\left(\frac{\pi t}{T}\right).

Integrate this force with respect to time over the collision interval from t=0t = 0 to t=Tt = T:

Jx=∫0T−Fmaxsin⁡(πtT)dtJ_x = \int_0^T -F_{\text{max}} \sin\left(\frac{\pi t}{T}\right) dt

Using the standard integral ∫sin⁡(kt) dt=−1kcos⁡(kt)\int \sin(k t) \, dt = -\frac{1}{k} \cos(k t) where k=πTk = \frac{\pi}{T}:

Jx=−Fmax[−Tπcos⁡(πtT)]0TJ_x = -F_{\text{max}} \left[ -\frac{T}{\pi} \cos\left(\frac{\pi t}{T}\right) \right]_0^T

Jx=FmaxTπ[cos⁡(π)−cos⁡(0)]J_x = \frac{F_{\text{max}} T}{\pi} \left[ \cos(\pi) - \cos(0) \right]

Since cos⁡(π)=−1\cos(\pi) = -1 and cos⁡(0)=1\cos(0) = 1:

Jx=FmaxTπ(−1−1)=−2FmaxTπJ_x = \frac{F_{\text{max}} T}{\pi} (-1 - 1) = -\frac{2 F_{\text{max}} T}{\pi}


03

Solve for the Initial Velocity v0v_0

Equate the impulse to the momentum change:

−2FmaxTπ=−mv0-\frac{2 F_{\text{max}} T}{\pi} = -m v_0

Canceling the negative signs yields:

v0=2FmaxTπmv_0 = \frac{2 F_{\text{max}} T}{\pi m}


04

Substitute the Numerical Values

  • Mass: m=75.0 kgm = 75.0\text{ kg}
  • Peak force: Fmax=3.20×104 NF_{\text{max}} = 3.20 \times 10^4\text{ N}
  • Impact duration: T=80.0 ms=0.0800 sT = 80.0\text{ ms} = 0.0800\text{ s}

v0=2⋅(3.20×104 N)⋅(0.0800 s)π⋅75.0 kgv_0 = \frac{2 \cdot (3.20 \times 10^4\text{ N}) \cdot (0.0800\text{ s})}{\pi \cdot 75.0\text{ kg}}

v0=5120235.619≈21.7 m/sv_0 = \frac{5120}{235.619} \approx 21.7\text{ m/s}

Pitfall Alert: Ensure that the impact duration TT is converted from milliseconds to seconds (80.0 ms=0.0800 s80.0\text{ ms} = 0.0800\text{ s}) before calculating, and track the negative sign of the opposing force to confirm that the initial forward velocity is positive.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student omits the factor of T/π that arises from the chain rule when integrating the sine function, writing the antiderivative of sin(πt/T) as -cos(πt/T).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    J=∫0TFmaxsin⁡(πtT)dtJ = \int_0^T F_{\text{max}} \sin\left(\frac{\pi t}{T}\right) dt

  2. Step 2

    J=Fmax[−cos⁡(πtT)]0T=Fmax(−cos⁡(π)−(−cos⁡(0)))=2FmaxJ = F_{\text{max}} \left[-\cos\left(\frac{\pi t}{T}\right)\right]_0^T = F_{\text{max}} \left(-\cos(\pi) - (-\cos(0))\right) = 2F_{\text{max}}

    Correct

    J=Fmax[−Tπcos⁡(πtT)]0T=2FmaxTπJ = F_{\text{max}} \left[-\frac{T}{\pi} \cos\left(\frac{\pi t}{T}\right)\right]_0^T = \frac{2 F_{\text{max}} T}{\pi}

    When integrating sin⁡(kt) dt\sin(k t)\,dt where k=πTk = \frac{\pi}{T}, the antiderivative requires dividing by kk (multiplying by Tπ\frac{T}{\pi}). Omitting this factor leaves the impulse in units of force (N\text{N}) rather than impulse (N⋅s\text{N}\cdot\text{s}).

  3. Step 3

    mv0=2Fmax  ⟹  v0=2(3.20×104 N)75.0 kg=853 m/sm v_0 = 2F_{\text{max}} \implies v_0 = \frac{2(3.20 \times 10^4\text{ N})}{75.0\text{ kg}} = 853\text{ m/s}

    Correct

    mv0=2FmaxTπ  ⟹  v0=2(3.20×104 N)(0.0800 s)π(75.0 kg)≈21.7 m/sm v_0 = \frac{2 F_{\text{max}} T}{\pi} \implies v_0 = \frac{2(3.20 \times 10^4\text{ N})(0.0800\text{ s})}{\pi (75.0\text{ kg})} \approx 21.7\text{ m/s}

    Your algebraic step equating momentum to impulse was logically carried out, but substituting the incorrect impulse expression led to an unrealistically high velocity of 853 m/s853\text{ m/s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the impulse-momentum theorem as the guiding principle relating force and velocity change.

You correctly set up the definite integral for impulse over the interval from t=0t = 0 to t=Tt = T.

You correctly evaluated the trigonometric boundary terms −cos⁡(π)−(−cos⁡(0))=2-\cos(\pi) - (-\cos(0)) = 2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of inner derivative factor in integration by substitution

You treated sin⁡(πtT)\sin\left(\frac{\pi t}{T}\right) as if the variable were just tt, forgetting to divide by the inner coefficient k=πTk = \frac{\pi}{T}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the reverse chain rule / substitution constant 1k\frac{1}{k} when finding the antiderivative ∫sin⁡(kt) dt=−1kcos⁡(kt)\int \sin(kt)\,dt = -\frac{1}{k}\cos(kt). Notice that omitting Tπ\frac{T}{\pi} also violates dimensional consistency, since impulse must have units of force multiplied by time.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reverse Chain Rule for Linear Arguments
  • For any constant k≠0k \neq 0, ∫sin⁡(kt) dt=−1kcos⁡(kt)+C\int \sin(k t)\,dt = -\frac{1}{k} \cos(k t) + C.

  • Always identify the argument u=ktu = kt, compute du=k dt  ⟹  dt=1k dudu = k\,dt \implies dt = \frac{1}{k}\,du, and ensure the scaling factor 1k\frac{1}{k} is carried through.

Dimensional Analysis Sanity Check
  • Impulse J=∫F dtJ = \int F\,dt must have dimensions [Force]×[Time]=N⋅s[\text{Force}] \times [\text{Time}] = \text{N}\cdot\text{s}.

  • Check the units of your integrated result before plugging in numbers: 2Fmax2 F_{\text{max}} has units of N\text{N}, signaling that a time quantity like TT is missing.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Let u=πtTu = \frac{\pi t}{T}, then dt=Tπdudt = \frac{T}{\pi} du.

  2. Evaluate the integral: J=Fmax⋅Tπ∫0πsin⁡(u) du=FmaxTπ[−cos⁡(u)]0π=2FmaxTπJ = F_{\text{max}} \cdot \frac{T}{\pi} \int_0^\pi \sin(u)\,du = \frac{F_{\text{max}} T}{\pi} \left[-\cos(u)\right]_0^\pi = \frac{2 F_{\text{max}} T}{\pi}.

  3. Equate impulse to initial momentum: mv0=2FmaxTπ  ⟹  v0=2FmaxTπmm v_0 = \frac{2 F_{\text{max}} T}{\pi} \implies v_0 = \frac{2 F_{\text{max}} T}{\pi m}.

  4. Convert T=80.0 ms=0.0800 sT = 80.0\text{ ms} = 0.0800\text{ s} and substitute values: v0=2(3.20×104 N)(0.0800 s)π(75.0 kg)≈21.7 m/sv_0 = \frac{2 (3.20 \times 10^4\text{ N})(0.0800\text{ s})}{\pi (75.0\text{ kg})} \approx 21.7\text{ m/s}.

Final answer

v0=21.7 m/sv_0 = 21.7\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice integrating trigonometric functions with scaled arguments of the form sin⁡(kt)\sin(kt) or cos⁡(kt)\cos(kt).

  • Perform a quick dimensional check whenever you compute an integral in physics to verify that dtdt contributes its unit of time.

OverviewACEpath Teacher's Diagnosis

02 The student treats the collision as having a triangular or average force profile of (1/2) F_max instead of integrating the sinusoidal force profile, yielding an impulse of (1/2) F_max T.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Favg=12Fmax  ⟹  J=FavgT=12FmaxTF_{\text{avg}} = \frac{1}{2} F_{\text{max}} \implies J = F_{\text{avg}} T = \frac{1}{2} F_{\text{max}} T

    Correct

    J=∫0TFmaxsin⁡(πtT)dt=2FmaxTπJ = \int_0^T F_{\text{max}} \sin\left(\frac{\pi t}{T}\right) dt = \frac{2 F_{\text{max}} T}{\pi}

    You assumed the average force over the impact duration is half of the peak force, which only applies to a triangle-shaped force profile. Because the stopping force is sinusoidal, you must integrate F(t)F(t) over [0,T][0, T], yielding an average force of 2πFmax≈0.637Fmax\frac{2}{\pi} F_{\text{max}} \approx 0.637 F_{\text{max}} rather than 0.5Fmax0.5 F_{\text{max}}.

  2. Step 2

    mv0=12FmaxT  ⟹  v0=FmaxT2mm v_0 = \frac{1}{2} F_{\text{max}} T \implies v_0 = \frac{F_{\text{max}} T}{2m}

    Correct

    mv0=2FmaxTπ  ⟹  v0=2FmaxTπmm v_0 = \frac{2 F_{\text{max}} T}{\pi} \implies v_0 = \frac{2 F_{\text{max}} T}{\pi m}

    Your algebraic rearrangement to isolate v0v_0 is mathematically sound, but it carries forward the incorrect impulse expression from Step 1.

  3. Step 3

    v0=(3.20×104 N)(0.0800 s)2×75.0 kg=17.1 m/sv_0 = \frac{(3.20 \times 10^4\text{ N})(0.0800\text{ s})}{2 \times 75.0\text{ kg}} = 17.1\text{ m/s}

    Correct

    v0=2(3.20×104 N)(0.0800 s)π(75.0 kg)≈21.7 m/sv_0 = \frac{2(3.20 \times 10^4\text{ N})(0.0800\text{ s})}{\pi (75.0\text{ kg})} \approx 21.7\text{ m/s}

    You correctly converted 80.0 ms80.0\text{ ms} to 0.0800 s0.0800\text{ s} and evaluated your formula accurately, but the resulting numerical value is lower than expected due to the earlier impulse error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized and applied the impulse-momentum theorem, J=Δp=mv0J = \Delta p = m v_0.

You converted the collision duration from milliseconds to seconds accurately (T=0.0800 sT = 0.0800\text{ s}).

You solved for the target variable v0v_0 with clear, valid algebraic steps.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect average force profile for non-linear force

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You relied on the simple arithmetic or triangular average formula Favg=12FmaxF_{\text{avg}} = \frac{1}{2} F_{\text{max}} instead of using calculus to integrate the explicit sinusoidal time-dependent force function F(t)=Fmaxsin⁡(πtT)F(t) = F_{\text{max}} \sin\left(\frac{\pi t}{T}\right).

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Impulse for Time-Varying Force
  • When force varies with time as a function F(t)F(t), impulse is defined as J=∫t1t2F(t) dtJ = \int_{t_1}^{t_2} F(t)\,dt, not by assuming an arithmetic mean.

  • Check whether the given force is constant, piecewise linear, or non-linear; if a functional form like sine or a polynomial is provided, set up a definite integral.

Average Value of a Half-Sine Wave
  • The mean value of sin⁡(θ)\sin(\theta) over the interval [0,π][0, \pi] is 1π∫0πsin⁡(θ) dθ=2π≈0.637\frac{1}{\pi} \int_0^\pi \sin(\theta)\,d\theta = \frac{2}{\pi} \approx 0.637.

  • Remember that a sine curve is fuller than a triangle with the same base and height (area 2πbh\frac{2}{\pi}bh vs. 12bh\frac{1}{2}bh), so its average value is 2πFmax\frac{2}{\pi}F_{\text{max}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the impulse integral: J=∫0TFmaxsin⁡(πtT)dtJ = \int_0^T F_{\text{max}} \sin\left(\frac{\pi t}{T}\right) dt

  2. Evaluate the antiderivative: J=Fmax[−Tπcos⁡(πtT)]0T=−FmaxTπ[cos⁡(π)−cos⁡(0)]=2FmaxTπJ = F_{\text{max}} \left[ -\frac{T}{\pi} \cos\left(\frac{\pi t}{T}\right) \right]_0^T = -\frac{F_{\text{max}} T}{\pi} [\cos(\pi) - \cos(0)] = \frac{2 F_{\text{max}} T}{\pi}

  3. Equate impulse magnitude to momentum change: mv0=2FmaxTπ  ⟹  v0=2FmaxTπmm v_0 = \frac{2 F_{\text{max}} T}{\pi} \implies v_0 = \frac{2 F_{\text{max}} T}{\pi m}

  4. Substitute numerical values: v0=2(3.20×104 N)(0.0800 s)π(75.0 kg)≈21.7 m/sv_0 = \frac{2 (3.20 \times 10^4\text{ N})(0.0800\text{ s})}{\pi (75.0\text{ kg})} \approx 21.7\text{ m/s}

Final answer

v0=21.7 m/sv_0 = 21.7\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how to compute the average value of non-linear functions using Fˉ=1T∫0TF(t) dt\bar{F} = \frac{1}{T}\int_0^T F(t)\,dt.

  • Practice integrating trigonometric and polynomial force functions to find total impulse.

  • Compare the areas under triangular, sinusoidal, and rectangular force-time curves to build geometric intuition for impact forces.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to convert the collision duration T from milliseconds to seconds, substituting 80.0 instead of 0.0800 s into the velocity formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    J=∫0TFmaxsin⁡(πtT)dt=2FmaxTπJ = \int_0^T F_{\text{max}} \sin\left(\frac{\pi t}{T}\right) dt = \frac{2 F_{\text{max}} T}{\pi}

  2. Step 2

    mv0=2FmaxTπ  ⟹  v0=2FmaxTπmm v_0 = \frac{2 F_{\text{max}} T}{\pi} \implies v_0 = \frac{2 F_{\text{max}} T}{\pi m}

  3. Step 3

    v0=2(3.20×104)(80.0)75.0π=21727 m/s≈2.17×104 m/sv_0 = \frac{2(3.20 \times 10^4)(80.0)}{75.0 \pi} = 21727\text{ m/s} \approx 2.17 \times 10^4\text{ m/s}

    Correct

    v0=2(3.20×104 N)(0.0800 s)(75.0 kg)π≈21.7 m/sv_0 = \frac{2(3.20 \times 10^4\text{ N})(0.0800\text{ s})}{(75.0\text{ kg})\pi} \approx 21.7\text{ m/s}

    You substituted T=80.0T = 80.0 directly instead of converting milliseconds to seconds (80.0 ms=0.0800 s80.0\text{ ms} = 0.0800\text{ s}). Because all other quantities are in standard SI units (N\text{N} and kg\text{kg}), the time must be in seconds, making your calculated velocity too large by a factor of 10001000.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up and evaluated the definite integral of the half-sine force to determine the net impulse.

You properly applied the impulse-momentum theorem for an object brought to rest.

You accurately solved for the initial speed variable in symbolic form.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error

You substituted the duration as 80.080.0 instead of 80.0×10−3 s80.0 \times 10^{-3}\text{ s}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You skipped checking unit consistency before numerical substitution, overlooking the prefix 'milli-' in milliseconds when working with SI base units.

REASONING PATH
Your ACEpath teacher’s suggested approach
SI Unit Alignment
  • Newton-seconds require time in seconds: 1 N⋅s=1 kg⋅m/s1\text{ N}\cdot\text{s} = 1\text{ kg}\cdot\text{m/s}.

  • Always convert non-standard prefixes to base SI units (80.0 ms=80.0×10−3 s80.0\text{ ms} = 80.0 \times 10^{-3}\text{ s}) before evaluating formulas.

Physical Reasonability Check
  • A passenger vehicle crash test occurs at highway or urban speeds (10–35 m/s10\text{--}35\text{ m/s}).

  • Sanity-check your final number against real-world physics: 2.17×104 m/s2.17 \times 10^4\text{ m/s} is Mach 63, which immediately flags a missing power of 1010.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert collision duration to SI base units: T=80.0 ms=0.0800 sT = 80.0\text{ ms} = 0.0800\text{ s}.

  2. Substitute SI values into v0=2FmaxTπmv_0 = \frac{2 F_{\text{max}} T}{\pi m}: v0=2(3.20×104 N)(0.0800 s)π(75.0 kg)v_0 = \frac{2 (3.20 \times 10^4\text{ N})(0.0800\text{ s})}{\pi (75.0\text{ kg})}.

  3. Compute the numerical value: v0=5120235.619≈21.7 m/sv_0 = \frac{5120}{235.619} \approx 21.7\text{ m/s}.

Final answer

v0=21.7 m/sv_0 = 21.7\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out explicit unit labels next to every given value at the top of your page before calculating.

  • Highlight metric prefixes like 'm' (milli-), 'k' (kilo-), and 'M' (mega-) to ensure they are converted into powers of ten.

  • Perform a quick order-of-magnitude reality check on velocities and forces in mechanical crash scenarios.

Lock it in

Similar question

01

A 0.50 kg0.50\text{ kg} model rocket engine produces a thrust given by F(t)=F0cos⁡(πt2T)F(t) = F_0 \cos\left(\frac{\pi t}{2 T}\right) over the interval t=0t = 0 to t=T=4.0 st = T = 4.0\text{ s}. If F0=12 NF_0 = 12\text{ N} and the rocket starts from rest, calculate the impulse delivered by the engine and its final speed.

Answer

Impulse J=∫0TF0cos⁡(πt2T)dt=F0[2Tπsin⁡(πt2T)]0T=2F0Tπ=2(12)(4.0)π≈30.6 N⋅sJ = \int_0^T F_0 \cos\left(\frac{\pi t}{2T}\right) dt = F_0 \left[\frac{2T}{\pi} \sin\left(\frac{\pi t}{2T}\right)\right]_0^T = \frac{2 F_0 T}{\pi} = \frac{2(12)(4.0)}{\pi} \approx 30.6\text{ N}\cdot\text{s}. Using J=mvfJ = m v_f, vf=30.560.50≈61.1 m/sv_f = \frac{30.56}{0.50} \approx 61.1\text{ m/s}.

02

A variable braking force acts on an 800 kg800\text{ kg} cart according to Fx(t)=−F0sin⁡2(πtT)F_x(t) = -F_0 \sin^2\left(\frac{\pi t}{T}\right) for duration T=2.0 sT = 2.0\text{ s}, with F0=1600 NF_0 = 1600\text{ N}. Using the identity sin⁡2(θ)=1−cos⁡(2θ)2\sin^2(\theta) = \frac{1 - \cos(2\theta)}{2}, determine the magnitude of the impulse exerted on the cart.

Answer

J=∫0TF0(1−cos⁡(2πt/T)2)dt=F02[t−T2πsin⁡(2πtT)]0T=F0T2=(1600 N)(2.0 s)2=1600 N⋅sJ = \int_0^T F_0 \left(\frac{1 - \cos(2\pi t / T)}{2}\right) dt = \frac{F_0}{2} \left[ t - \frac{T}{2\pi}\sin\left(\frac{2\pi t}{T}\right) \right]_0^T = \frac{F_0 T}{2} = \frac{(1600\text{ N})(2.0\text{ s})}{2} = 1600\text{ N}\cdot\text{s}.

03

An object of mass m=2.0 kgm = 2.0\text{ kg} moving at 15 m/s15\text{ m/s} is stopped by a bumper exerting force F(t)=−Atsin⁡(πtT)F(t) = -A t \sin\left(\frac{\pi t}{T}\right) over impact duration T=0.10 sT = 0.10\text{ s}. Use integration by parts to show that ∫0Ttsin⁡(πtT)dt=T2π\int_0^T t \sin\left(\frac{\pi t}{T}\right) dt = \frac{T^2}{\pi}, and find the constant AA required to stop the object completely.

Answer

Using ∫u dv\int u\,dv with u=tu = t and dv=sin⁡(πtT)dtdv = \sin\left(\frac{\pi t}{T}\right)dt: ∫0Ttsin⁡(πtT)dt=[−tTπcos⁡(πtT)]0T+Tπ∫0Tcos⁡(πtT)dt=T2π+0=T2π\int_0^T t \sin\left(\frac{\pi t}{T}\right)dt = \left[-t \frac{T}{\pi}\cos\left(\frac{\pi t}{T}\right)\right]_0^T + \frac{T}{\pi}\int_0^T \cos\left(\frac{\pi t}{T}\right)dt = \frac{T^2}{\pi} + 0 = \frac{T^2}{\pi}. Total impulse magnitude is J=AT2πJ = \frac{A T^2}{\pi}. Equating to momentum change Δp=mv=(2.0)(15)=30 kg⋅m/s\Delta p = mv = (2.0)(15) = 30\text{ kg}\cdot\text{m/s} yields A=30πT2=30π(0.10)2≈9.42×103 N/sA = \frac{30\pi}{T^2} = \frac{30\pi}{(0.10)^2} \approx 9.42 \times 10^3\text{ N/s}.

Loading workspace…