Resources
In a physics laboratory experiment, a ballistic launcher mounted at table height is angled at above the horizontal. Photogates positioned at the muzzle record an average launch velocity of . The launch opening is located at a vertical height of above the laboratory floor. A carbon paper landing pad is placed on the floor to record the landing impact. Taking : (a) calculate the maximum height reached by the steel ball relative to the laboratory floor, (b) calculate the total time of flight from launch to floor impact, and (c) determine the predicted horizontal distance from the launch point to the landing location.
Answer and steps
Final answer
(a) ; (b) ; (c)
Steps
Resolve Initial Velocity into Components
Choose a Cartesian coordinate system where the origin is directly on the floor beneath the launch opening, with the -direction pointing horizontally forward and the -direction pointing vertically upward.
The components of the initial velocity are:
Maximum Height Relative to the Floor
At the apex of the trajectory, the vertical velocity becomes zero (). Using the kinematic relation :
The total height relative to the laboratory floor includes the initial launch height :
Total Time of Flight
The vertical position of the projectile as a function of time is:
Setting at the moment of floor impact yields the quadratic equation:
Applying the quadratic formula:
(A common pitfall is using the symmetric flight time formula ; that formula only applies when launch and landing are at the same vertical level.)
Horizontal Landing Distance
Because there is no horizontal acceleration (), the horizontal velocity remains constant throughout the flight:
Typical errors
01 The student calculates the maximum height rise above the launcher but neglects to add the initial release height above the floor.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You correctly determined the vertical component of the initial velocity and used it to find the maximum vertical displacement above the launch point, . However, because the launcher is located at an initial elevation of above the floor, the total maximum height relative to the floor must include this initial height: .
- Step 2
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved the launch velocity into horizontal and vertical components using trigonometry.
You correctly accounted for the negative vertical displacement when setting up the quadratic equation for flight time.
You accurately calculated the horizontal range using constant-velocity kinematics.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou equated the vertical rise above the release point, , directly to the total height relative to the ground reference frame, forgetting that the projectile started from an elevated launch height .
REASONING PATH
Your ACEpath teacher’s suggested approach- Reference Level Check
Always verify whether the requested maximum height is measured relative to the launch point () or a lower ground/floor datum ().
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the vertical rise above the launch point: .
Add the launch height above the floor: .
(a) ; (b) ; (c)
02 The student misapplies the symmetric-level flight time formula to calculate time of flight, ignoring the additional descent to the floor below launch level.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
The formula only applies when a projectile launches and lands at the same vertical level (net vertical displacement ). Because the ball lands on the laboratory floor below the launcher, you must solve the full kinematic equation with .
- Step 3Correct
Your method for calculating horizontal range from and is mathematically sound, but substituting the incorrect flight time caused an incorrect landing distance.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved the initial velocity into vertical and horizontal components using trigonometric functions.
You applied the kinematic peak-height formula accurately to find the vertical rise above the launcher.
You added the launch elevation to the vertical rise to obtain the correct maximum height above the floor.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the entire trajectory as symmetrical level-ground projectile motion, overlooking the vertical displacement between the table and the floor.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Launch and Landing Elevations
The symmetric flight time formula is valid if and only if ().
Before choosing a shortcut formula, compare the vertical coordinate of the landing surface to the launch point.
- Set Up Full Vertical Displacement Kinematics
When , the displacement relation is , where .
Substitute and solve the resulting quadratic equation for the positive root .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet the vertical position equation relative to the launch point: .
Substitute , , and : .
Rearrange into standard quadratic form: .
Apply the quadratic formula: .
Calculate the horizontal landing distance: .
(a) ; (b) ; (c)
03 The student treats the vertical displacement as positive rather than negative in the kinematic equation for time of flight.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because the projectile lands on the floor below the muzzle, the vertical displacement relative to the launch height is . Setting asks when the ball reaches above the launch point, which it never does since its apex is only above the muzzle.
- Step 3Correct
You correctly computed the horizontal velocity component , but you could not calculate the range because of the missing flight time from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved the launch velocity into horizontal and vertical components.
You used the kinematic velocity-squared formula accurately to determine the peak vertical rise.
You added the table height to the vertical rise to find the correct total maximum height relative to the floor.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assigned a positive sign to the vertical displacement instead of recognizing that landing below the launch height corresponds to a negative displacement .
REASONING PATH
Your ACEpath teacher’s suggested approach- Establish coordinate signs for displacement
Displacement is a vector defined as .
When taking upward as positive, any landing level below the release point requires a negative value in .
- Sanity check on discriminant and maximum height
A negative discriminant in a trajectory problem indicates the projectile never reaches that vertical elevation.
Compare the target height to your calculated maximum height before concluding that no physical solution exists.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet the vertical displacement from launch to floor impact: .
Substitute into the vertical kinematic equation: .
Rearrange into standard quadratic form: .
Apply the quadratic formula: .
Calculate the horizontal landing distance: .
(a) ; (b) ; (c)
Lock it in
What is the relationship between the peak height relative to the ground, , and the maximum vertical rise above the launch point, ?
. Always add the initial elevation to the vertical rise.
Similar question
A toy rocket is launched from the top of a tall platform with an initial vertical velocity component of . Taking , find its maximum height above the ground.
Answer
. Key steps: Rise above platform ; total height relative to ground .
An archer fires an arrow from a shoulder height of above flat ground at an angle of above horizontal with initial speed . Taking , calculate (a) the maximum height reached above the ground and (b) the vertical velocity just before impact with the ground.
Answer
(a) , (b) . Key steps: ; , so . At impact , so .
A projectile is launched from a cliff of height at angle above the horizontal with speed . If its maximum height above the base of the cliff is twice the cliff height (), express the cliff height in terms of , , and .
Answer
. Key steps: Total peak height is . Setting yields .