Resources

In an introductory physics laboratory rotational equilibrium experiment, a meter stick is balanced horizontally at its 50.0 cm50.0\text{ cm} mark on a knife-edge support (the origin of rotation). A student suspends a calibrated brass mass m1=150.0 gm_1 = 150.0\text{ g} from a hanger at the 20.0 cm20.0\text{ cm} mark. To balance the meter stick, an unknown slotted mass m2m_2 is hung from a clamp located at the 75.0 cm75.0\text{ cm} mark. Taking the acceleration due to gravity as g=9.80 m/s2g = 9.80\text{ m/s}^2 and defining the +x+x-axis to run from 0.0 cm0.0\text{ cm} to 100.0 cm100.0\text{ cm} with +y+y upward and +z+z out of the page: (a) determine the vector torque τ⃗1\vec{\tau}_1 exerted by mass m1m_1 about the pivot, and (b) determine the required mass m2m_2 and the direction of the torque τ⃗2\vec{\tau}_2 it produces.

Answer and steps

Final answer

(a) τ⃗1=+0.441 N⋅m  k^\vec{\tau}_1 = +0.441\text{ N}\cdot\text{m}\;\hat{k} (counterclockwise); (b) m2=180 gm_2 = 180\text{ g} (0.180 kg0.180\text{ kg}), with τ⃗2=−0.441 N⋅m  k^\vec{\tau}_2 = -0.441\text{ N}\cdot\text{m}\;\hat{k} (clockwise)

Steps

Part (a): Vector Torque Exerted by Mass m1m_1

  1. Identify the position vector relative to the pivot:
    The pivot is at xpivot=50.0 cm=0.500 mx_{\text{pivot}} = 50.0\text{ cm} = 0.500\text{ m}. The brass mass m1m_1 hangs at x1=20.0 cm=0.200 mx_1 = 20.0\text{ cm} = 0.200\text{ m}.
    The position vector pointing from the pivot to the point of application is: r⃗1=(x1−xpivot) i^=(0.200−0.500) i^ m=−0.300 i^ m\vec{r}_1 = (x_1 - x_{\text{pivot}})\,\hat{i} = (0.200 - 0.500)\,\hat{i}\text{ m} = -0.300\,\hat{i}\text{ m}
  2. Determine the downward gravitational force:
    Convert mass to kilograms: m1=150.0 g=0.1500 kgm_1 = 150.0\text{ g} = 0.1500\text{ kg}.
    The force acts straight down in the negative yy-direction: F⃗1=−m1g j^=−(0.1500 kg)(9.80 m/s2) j^=−1.47 j^ N\vec{F}_1 = -m_1 g\,\hat{j} = -(0.1500\text{ kg})(9.80\text{ m/s}^2)\,\hat{j} = -1.47\,\hat{j}\text{ N}
  3. Compute the torque vector:
    Using the cross product τ⃗=r⃗×F⃗\vec{\tau} = \vec{r} \times \vec{F} and the unit vector identity i^×j^=k^\hat{i} \times \hat{j} = \hat{k}: τ⃗1=r⃗1×F⃗1=(−0.300 i^ m)×(−1.47 j^ N)=(−0.300)(−1.47)(i^×j^)=+0.441 k^ N⋅m\vec{\tau}_1 = \vec{r}_1 \times \vec{F}_1 = (-0.300\,\hat{i}\text{ m}) \times (-1.47\,\hat{j}\text{ N}) = (-0.300)(-1.47)(\hat{i} \times \hat{j}) = +0.441\,\hat{k}\text{ N}\cdot\text{m} A positive k^\hat{k} torque indicates a counterclockwise tendency to rotate about the pivot.

Part (b): Mass m2m_2 and Torque Direction for Rotational Equilibrium

  1. Apply the condition for static rotational equilibrium:
    For the meter stick to remain balanced horizontally, the net torque about the pivot must be zero: ∑τ⃗=τ⃗1+τ⃗2=0⃗\sum \vec{\tau} = \vec{\tau}_1 + \vec{\tau}_2 = \vec{0} τ⃗2=−τ⃗1=−0.441 k^ N⋅m\vec{\tau}_2 = -\vec{\tau}_1 = -0.441\,\hat{k}\text{ N}\cdot\text{m} The negative k^\hat{k} sign indicates that τ⃗2\vec{\tau}_2 acts in the clockwise direction (into the page, along −z^-\hat{z}).
  2. Relate τ⃗2\vec{\tau}_2 to the unknown mass m2m_2:
    The mass m2m_2 is located at x2=75.0 cm=0.750 mx_2 = 75.0\text{ cm} = 0.750\text{ m}, giving a position vector: r⃗2=(0.750−0.500) i^ m=+0.250 i^ m\vec{r}_2 = (0.750 - 0.500)\,\hat{i}\text{ m} = +0.250\,\hat{i}\text{ m} The force exerted by m2m_2 is: F⃗2=−m2g j^=−m2(9.80) j^ N\vec{F}_2 = -m_2 g\,\hat{j} = -m_2(9.80)\,\hat{j}\text{ N} Computing the torque gives: τ⃗2=r⃗2×F⃗2=(+0.250 i^)×(−9.80 m2 j^)=−2.45 m2 k^ N⋅m\vec{\tau}_2 = \vec{r}_2 \times \vec{F}_2 = (+0.250\,\hat{i}) \times (-9.80\,m_2\,\hat{j}) = -2.45\,m_2\,\hat{k}\text{ N}\cdot\text{m}
  3. Solve for m2m_2:
    Equating components along k^\hat{k}: −2.45 m2=−0.441-2.45\,m_2 = -0.441 m2=0.4412.45=0.180 kg=180 gm_2 = \frac{0.441}{2.45} = 0.180\text{ kg} = 180\text{ g}

Common Pitfall: Always measure lever arms from the pivot axis (50.0 cm50.0\text{ cm}), not from the origin of the ruler (0.0 cm0.0\text{ cm}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses the position marks on the meter stick directly as lever arm distances from the pivot rather than subtracting the pivot location at 50.0 cm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    r1=20.0 cm=0.200 m  ⟹  F1=m1g=(0.1500 kg)(9.80 m/s2)=1.47 N  ⟹  τ1=r1×F1=(0.200 m)(1.47 N) k^=+0.294 N⋅m k^r_1 = 20.0\text{ cm} = 0.200\text{ m} \implies F_1 = m_1 g = (0.1500\text{ kg})(9.80\text{ m/s}^2) = 1.47\text{ N} \implies \tau_1 = r_1 \times F_1 = (0.200\text{ m})(1.47\text{ N})\,\hat{k} = +0.294\text{ N}\cdot\text{m}\,\hat{k}

    Correct

    r⃗1=(0.200 m−0.500 m) i^=−0.300 i^ m  ⟹  τ⃗1=r⃗1×F⃗1=(−0.300 i^ m)×(−1.47 j^ N)=+0.441 k^ N⋅m\vec{r}_1 = (0.200\text{ m} - 0.500\text{ m})\,\hat{i} = -0.300\,\hat{i}\text{ m} \implies \vec{\tau}_1 = \vec{r}_1 \times \vec{F}_1 = (-0.300\,\hat{i}\text{ m}) \times (-1.47\,\hat{j}\text{ N}) = +0.441\,\hat{k}\text{ N}\cdot\text{m}

    You calculated the gravitational force correctly, but you measured the lever arm from the 0.0 cm0.0\text{ cm} ruler end instead of the pivot point at 50.0 cm50.0\text{ cm}. The displacement from the pivot to the mass is r⃗1=(20.0 cm−50.0 cm) i^=−0.300 i^ m\vec{r}_1 = (20.0\text{ cm} - 50.0\text{ cm})\,\hat{i} = -0.300\,\hat{i}\text{ m}.

  2. Step 2

    r2=75.0 cm=0.750 m  ⟹  τ1=τ2  ⟹  (0.200 m)(m1g)=(0.750 m)(m2g)  ⟹  m2=m1(0.200/0.750)=(150.0 g)(0.267)=40.0 gr_2 = 75.0\text{ cm} = 0.750\text{ m} \implies \tau_1 = \tau_2 \implies (0.200\text{ m})(m_1 g) = (0.750\text{ m})(m_2 g) \implies m_2 = m_1(0.200 / 0.750) = (150.0\text{ g})(0.267) = 40.0\text{ g}

    Correct

    r⃗2=(0.750 m−0.500 m) i^=+0.250 i^ m  ⟹  ∣τ1∣=∣τ2∣  ⟹  (0.300 m)(m1g)=(0.250 m)(m2g)  ⟹  m2=150.0 g×0.3000.250=180 g\vec{r}_2 = (0.750\text{ m} - 0.500\text{ m})\,\hat{i} = +0.250\,\hat{i}\text{ m} \implies |\tau_1| = |\tau_2| \implies (0.300\text{ m})(m_1 g) = (0.250\text{ m})(m_2 g) \implies m_2 = 150.0\text{ g} \times \frac{0.300}{0.250} = 180\text{ g}

    You set up the static equilibrium equation correctly, but you repeated the same error by using the ruler mark 75.0 cm75.0\text{ cm} rather than the distance from the pivot (75.0 cm−50.0 cm=25.0 cm=0.250 m)(75.0\text{ cm} - 50.0\text{ cm} = 25.0\text{ cm} = 0.250\text{ m}).

  3. Step 3

    Direction of τ2 is −z (into the page)\text{Direction of }\tau_2\text{ is }-z\text{ (into the page)}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the grams of mass m1m_1 into kilograms to calculate the gravitational force.

You recognized that static equilibrium requires the magnitudes of opposing torques to balance.

You correctly identified that the balancing torque acts into the page along the −z-z direction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Pivot-relative lever arm misconception

You read position coordinates directly from the ruler scale rather than subtracting the pivot coordinate.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing an object's absolute coordinate position on a measuring scale with its position vector r⃗=x⃗−x⃗pivot\vec{r} = \vec{x} - \vec{x}_{\text{pivot}} relative to the chosen axis of rotation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Establish the Pivot as the Origin
  • Torque is defined about an axis: τ⃗=r⃗×F⃗\vec{\tau} = \vec{r} \times \vec{F}, where r⃗\vec{r} points from the pivot axis to the point of force application.

  • Always compute r⃗=x⃗force−x⃗pivot\vec{r} = \vec{x}_{\text{force}} - \vec{x}_{\text{pivot}} before writing down any torque magnitude or cross product.

Verify Lever Arm Distances
  • The distance dd in τ=dF⊥\tau = d F_{\perp} is the physical separation between the pivot knife-edge and the hanging mass.

  • Check the meter stick diagram visually: if the mass is at 20 cm20\text{ cm} and the pivot is at 50 cm50\text{ cm}, the lever arm is 30 cm30\text{ cm}, not 20 cm20\text{ cm}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find position vector r⃗1\vec{r}_1: r⃗1=(0.200−0.500) i^ m=−0.300 i^ m\vec{r}_1 = (0.200 - 0.500)\,\hat{i}\text{ m} = -0.300\,\hat{i}\text{ m}.

  2. Compute torque τ⃗1\vec{\tau}_1: τ⃗1=(−0.300 i^ m)×(−(0.1500)(9.80) j^ N)=+0.441 k^ N⋅m\vec{\tau}_1 = (-0.300\,\hat{i}\text{ m}) \times (-(0.1500)(9.80)\,\hat{j}\text{ N}) = +0.441\,\hat{k}\text{ N}\cdot\text{m}.

  3. Find position vector r⃗2\vec{r}_2: r⃗2=(0.750−0.500) i^ m=+0.250 i^ m\vec{r}_2 = (0.750 - 0.500)\,\hat{i}\text{ m} = +0.250\,\hat{i}\text{ m}.

  4. Set up rotational balance: ∣τ1∣=∣τ2∣  ⟹  (0.300 m)(m1g)=(0.250 m)(m2g)|\tau_1| = |\tau_2| \implies (0.300\text{ m})(m_1 g) = (0.250\text{ m})(m_2 g).

  5. Solve for m2m_2: m2=150.0 g×0.300 m0.250 m=180 gm_2 = 150.0\text{ g} \times \frac{0.300\text{ m}}{0.250\text{ m}} = 180\text{ g}.

Final answer

(a) τ⃗1=+0.441 k^ N⋅m\vec{\tau}_1 = +0.441\,\hat{k}\text{ N}\cdot\text{m}; (b) m2=180 gm_2 = 180\text{ g} (0.180 kg0.180\text{ kg}), and τ⃗2\vec{\tau}_2 points along −k^-\hat{k} (into the page / clockwise)

NEXT STEPS
Final Takeaways from Your Teacher
  • Before setting up torque equations, draw a clear free-body diagram and explicitly label the distance from the pivot to each force.

  • Practice finding lever arm vectors r⃗=x⃗−x⃗pivot\vec{r} = \vec{x} - \vec{x}_{\text{pivot}} for pivots that are not at the origin of the coordinate ruler.

OverviewACEpath Teacher's Diagnosis

02 The student reverses the sign of the cross product by treating the downward force on the left side of the pivot as generating a clockwise torque instead of counterclockwise.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    r1=20.0 cm−50.0 cm=−0.300 m  ⟹  F1=−m1g=−(0.1500 kg)(9.80 m/s2)=−1.47 Nr_1 = 20.0\text{ cm} - 50.0\text{ cm} = -0.300\text{ m} \implies F_1 = -m_1 g = -(0.1500\text{ kg})(9.80\text{ m/s}^2) = -1.47\text{ N}

  2. Step 2

    τ1=−0.441 N⋅m  k^\tau_1 = -0.441\text{ N}\cdot\text{m}\;\hat{k}

    Correct

    τ⃗1=r⃗1×F⃗1=(−0.300 i^ m)×(−1.47 j^ N)=+0.441 k^ N⋅m\vec{\tau}_1 = \vec{r}_1 \times \vec{F}_1 = (-0.300\,\hat{i}\text{ m}) \times (-1.47\,\hat{j}\text{ N}) = +0.441\,\hat{k}\text{ N}\cdot\text{m}

    When evaluating the cross product, (−0.300)(−1.47)(i^×j^)=+0.441 k^ N⋅m(-0.300)(-1.47)(\hat{i} \times \hat{j}) = +0.441\,\hat{k}\text{ N}\cdot\text{m}. A downward pull on the left side of the pivot rotates the meter stick counterclockwise, which corresponds to the +z+z (+k^+\hat{k}) direction.

  3. Step 3

    τ1+τ2=0  ⟹  τ2=+0.441 N⋅m  k^, which points in the +z direction (out of the page)\tau_1 + \tau_2 = 0 \implies \tau_2 = +0.441\text{ N}\cdot\text{m}\;\hat{k}\text{, which points in the }+z\text{ direction (out of the page)}

    Correct

    τ⃗1+τ⃗2=0⃗  ⟹  τ⃗2=−τ⃗1=−0.441 k^ N⋅m (clockwise, into the page / −z^)\vec{\tau}_1 + \vec{\tau}_2 = \vec{0} \implies \vec{\tau}_2 = -\vec{\tau}_1 = -0.441\,\hat{k}\text{ N}\cdot\text{m}\text{ (clockwise, into the page / }-\hat{z}\text{)}

    Your equilibrium equation τ1+τ2=0\tau_1 + \tau_2 = 0 is correct, but the sign of τ⃗2\vec{\tau}_2 and its direction were reversed because of the earlier sign error in τ⃗1\vec{\tau}_1.

  4. Step 4

    m1d1=m2d2  ⟹  (150.0 g)(0.300 m)=m2(0.250 m)  ⟹  m2=180.0 gm_1 d_1 = m_2 d_2 \implies (150.0\text{ g})(0.300\text{ m}) = m_2 (0.250\text{ m}) \implies m_2 = 180.0\text{ g}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly measured the position vectors from the pivot at 50.0 cm50.0\text{ cm} rather than from the ruler's zero mark.

You calculated the gravitational force with the correct magnitude and units.

You applied the static equilibrium balance condition accurately to obtain the required mass m2m_2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Vector Cross Product

You assigned a negative sign to τ⃗1\vec{\tau}_1, overlooking that multiplying two negative components alongside i^×j^=+k^\hat{i} \times \hat{j} = +\hat{k} yields a positive result.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely relied on an intuitive guess that a downward force produces a negative or clockwise torque, forgetting that a downward force applied to the left of the pivot rotates the object counterclockwise (+k^+\hat{k}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Right-Hand Rule Verification
  • Point your fingers from the pivot along r⃗\vec{r}, curl them in the direction of F⃗\vec{F}, and your thumb points along the torque vector τ⃗\vec{\tau}.

  • For r⃗1\vec{r}_1 pointing left (−i^-\hat{i}) and F⃗1\vec{F}_1 pointing down (−j^-\hat{j}), curling from left to down makes your thumb point out of the page (+k^+\hat{k}, counterclockwise).

Component-Wise Cross Product
  • τ⃗=(rxi^)×(Fyj^)=(rxFy)(i^×j^)=(rxFy)k^\vec{\tau} = (r_x \hat{i}) \times (F_y \hat{j}) = (r_x F_y)(\hat{i} \times \hat{j}) = (r_x F_y)\hat{k}.

  • Track the signs of both components explicitly: (−0.300)×(−1.47)=+0.441(-0.300) \times (-1.47) = +0.441.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. τ⃗1=r⃗1×F⃗1=(−0.300 i^ m)×(−1.47 j^ N)=+0.441 k^ N⋅m\vec{\tau}_1 = \vec{r}_1 \times \vec{F}_1 = (-0.300\,\hat{i}\text{ m}) \times (-1.47\,\hat{j}\text{ N}) = +0.441\,\hat{k}\text{ N}\cdot\text{m} (counterclockwise / out of page)

  2. τ⃗2=−τ⃗1=−0.441 k^ N⋅m\vec{\tau}_2 = -\vec{\tau}_1 = -0.441\,\hat{k}\text{ N}\cdot\text{m} (clockwise / into page, along −z^-\hat{z})

Final answer

(a) τ⃗1=+0.441 N⋅m  k^\vec{\tau}_1 = +0.441\text{ N}\cdot\text{m}\;\hat{k}; (b) m2=180 gm_2 = 180\text{ g}, with τ⃗2=−0.441 N⋅m  k^\vec{\tau}_2 = -0.441\text{ N}\cdot\text{m}\;\hat{k} (into the page)

NEXT STEPS
Final Takeaways from Your Teacher
  • Always perform a physical sanity check on rotation: ask whether the force pulls that side down (counterclockwise for the left side, clockwise for the right side).

  • Double-check vector cross products algebraically by confirming that (−i^)×(−j^)=+(i^×j^)=+k^(-\hat{i}) \times (-\hat{j}) = +(\hat{i} \times \hat{j}) = +\hat{k}.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to convert the mass from grams to kilograms when calculating force, resulting in a torque that is off by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    r1=50.0 cm−20.0 cm=0.300 m  ⟹  F1=m1g=(150.0)(9.80 m/s2)=1470 Nr_1 = 50.0\text{ cm} - 20.0\text{ cm} = 0.300\text{ m} \implies F_1 = m_1 g = (150.0)(9.80\text{ m/s}^2) = 1470\text{ N}

    Correct

    F1=m1g=(0.1500 kg)(9.80 m/s2)=1.47 NF_1 = m_1 g = (0.1500\text{ kg})(9.80\text{ m/s}^2) = 1.47\text{ N}

    You correctly determined the lever arm distance r1=0.300 mr_1 = 0.300\text{ m}, but you substituted mass in grams rather than kilograms. In SI units, 1 N=1 kg⋅m/s21\text{ N} = 1\text{ kg}\cdot\text{m/s}^2, so you must convert 150.0 g150.0\text{ g} to 0.1500 kg0.1500\text{ kg} before multiplying by gg.

  2. Step 2

    τ1=r1F1=(0.300 m)(1470 N)=+441 N⋅m  k^\tau_1 = r_1 F_1 = (0.300\text{ m})(1470\text{ N}) = +441\text{ N}\cdot\text{m}\;\hat{k}

    Correct

    τ⃗1=+0.441 N⋅m  k^\vec{\tau}_1 = +0.441\text{ N}\cdot\text{m}\;\hat{k}

    You correctly identified that the downward force to the left of the pivot produces a counterclockwise torque (+k^+\hat{k}). The numerical magnitude of 441 N⋅m441\text{ N}\cdot\text{m} is off by a factor of 10001000 due to the unconverted mass in Step 1.

  3. Step 3

    τ2=−441 N⋅m  k^ (into the page)\tau_2 = -441\text{ N}\cdot\text{m}\;\hat{k}\text{ (into the page)}

    Correct

    τ⃗2=−0.441 N⋅m  k^ (clockwise / into the page)\vec{\tau}_2 = -0.441\text{ N}\cdot\text{m}\;\hat{k}\text{ (clockwise / into the page)}

    You correctly deduced that static balance requires an equal and opposite torque pointing in the −k^-\hat{k} direction (into the page / clockwise). Its magnitude inherits the factor of 10001000 error from Step 1.

  4. Step 4

    d1=30.0 cm,  d2=25.0 cm  ⟹  m1d1=m2d2  ⟹  m2=(150.0 g)(30.025.0)=180.0 gd_1 = 30.0\text{ cm},\; d_2 = 25.0\text{ cm} \implies m_1 d_1 = m_2 d_2 \implies m_2 = (150.0\text{ g})\left(\frac{30.0}{25.0}\right) = 180.0\text{ g}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the lever arm distances from the pivot axis at 50.0 cm50.0\text{ cm}.

You assigned the correct vector signs and directions for both torques (+k^+\hat{k} for counterclockwise and −k^-\hat{k} for clockwise).

You recognized that torque balance reduces to an inverse proportion between mass and lever arm.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing SI Unit Conversion

You used mass in grams directly into F=mgF = mg instead of converting to kilograms.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In SI base units, the Newton is defined as kg⋅m/s2\text{kg}\cdot\text{m/s}^2. Whenever you compute an absolute force or torque, mass must be expressed in kilograms (1 kg=1000 g1\text{ kg} = 1000\text{ g}). While ratio equations like m1d1=m2d2m_1 d_1 = m_2 d_2 tolerate mixed units, standalone SI derived quantities like Newtons and Newton-meters require standard base units.

REASONING PATH
Your ACEpath teacher’s suggested approach
SI Force Units
  • Force (N)=mass (kg)×g (m/s2)\text{Force (N)} = \text{mass (kg)} \times g\,(\text{m/s}^2)

  • Always convert mass to kilograms (m [kg]=m [g]/1000m\text{ [kg]} = m\text{ [g]} / 1000) before calculating force or torque.

Ratios vs. Absolute Values
  • Unit conversions cancel out in dimensionless ratios, but never in absolute SI calculations.

  • Check the units of your target variable: if the answer requires N\text{N} or N⋅m\text{N}\cdot\text{m}, convert all quantities to meters and kilograms first.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert m1m_1 to kilograms: m1=150.0 g=0.1500 kgm_1 = 150.0\text{ g} = 0.1500\text{ kg}.

  2. Calculate gravitational force: F1=(0.1500 kg)(9.80 m/s2)=1.47 NF_1 = (0.1500\text{ kg})(9.80\text{ m/s}^2) = 1.47\text{ N}.

  3. Calculate vector torque τ⃗1\vec{\tau}_1: τ⃗1=r⃗1×F⃗1=(−0.300 i^ m)×(−1.47 j^ N)=+0.441 k^ N⋅m\vec{\tau}_1 = \vec{r}_1 \times \vec{F}_1 = (-0.300\,\hat{i}\text{ m}) \times (-1.47\,\hat{j}\text{ N}) = +0.441\,\hat{k}\text{ N}\cdot\text{m}.

  4. Apply equilibrium condition: τ⃗2=−τ⃗1=−0.441 k^ N⋅m\vec{\tau}_2 = -\vec{\tau}_1 = -0.441\,\hat{k}\text{ N}\cdot\text{m} (clockwise).

Final answer

(a) τ⃗1=+0.441 N⋅m  k^\vec{\tau}_1 = +0.441\text{ N}\cdot\text{m}\;\hat{k} (counterclockwise); (b) m2=180 gm_2 = 180\text{ g} (0.180 kg0.180\text{ kg}), with τ⃗2=−0.441 N⋅m  k^\vec{\tau}_2 = -0.441\text{ N}\cdot\text{m}\;\hat{k} (clockwise)

NEXT STEPS
Final Takeaways from Your Teacher
  • Form the habit of writing explicit units next to every numerical quantity during intermediate substitutions.

  • Perform a quick order-of-magnitude reality check: a small mass like 150 g150\text{ g} weighs roughly 1.5 N1.5\text{ N}, not 1470 N1470\text{ N} (which is the weight of two adult humans).

Lock it in

Similar question

01

A uniform meter stick balances on a fulcrum at the 50.0 cm50.0\text{ cm} mark. A mass of 200 g200\text{ g} is placed at the 10.0 cm10.0\text{ cm} mark. Where must a 400 g400\text{ g} mass be placed along the meter stick to maintain rotational equilibrium?

Answer

At the 70.0 cm70.0\text{ cm} mark.

  1. Lever arm of first mass: d1=∣10.0 cm−50.0 cm∣=40.0 cmd_1 = |10.0\text{ cm} - 50.0\text{ cm}| = 40.0\text{ cm}.
  2. Balance torques: m1d1=m2d2  ⟹  (200 g)(40.0 cm)=(400 g)d2  ⟹  d2=20.0 cmm_1 d_1 = m_2 d_2 \implies (200\text{ g})(40.0\text{ cm}) = (400\text{ g}) d_2 \implies d_2 = 20.0\text{ cm} to the right of the fulcrum.
  3. Position on meter stick: x2=50.0 cm+20.0 cm=70.0 cmx_2 = 50.0\text{ cm} + 20.0\text{ cm} = 70.0\text{ cm}.
02

A non-uniform meter stick of mass M=120 gM = 120\text{ g} has its center of gravity at the 42.0 cm42.0\text{ cm} mark. It is pivoted at the 30.0 cm30.0\text{ cm} mark. What mass mm hung at the 10.0 cm10.0\text{ cm} mark will keep the stick horizontal?

Answer

72.0 g72.0\text{ g}.

  1. Distance from pivot to center of gravity: dcg=42.0 cm−30.0 cm=12.0 cmd_{\text{cg}} = 42.0\text{ cm} - 30.0\text{ cm} = 12.0\text{ cm} (clockwise torque).
  2. Distance from pivot to mass mm: dm=30.0 cm−10.0 cm=20.0 cmd_m = 30.0\text{ cm} - 10.0\text{ cm} = 20.0\text{ cm} (counterclockwise torque).
  3. Static equilibrium: m⋅dm=M⋅dcg  ⟹  m(20.0 cm)=(120 g)(12.0 cm)  ⟹  m=72.0 gm \cdot d_m = M \cdot d_{\text{cg}} \implies m(20.0\text{ cm}) = (120\text{ g})(12.0\text{ cm}) \implies m = 72.0\text{ g}.
03

A light beam of length 2.00 m2.00\text{ m} is pivoted at x=0.60 mx = 0.60\text{ m}. A downward force F⃗1=−30.0 j^ N\vec{F}_1 = -30.0\,\hat{j}\text{ N} acts at x=0.10 mx = 0.10\text{ m}, and a force F⃗2=40.0 j^ N\vec{F}_2 = 40.0\,\hat{j}\text{ N} (upward) acts at x=1.40 mx = 1.40\text{ m}. Calculate the net vector torque about the pivot.

Answer

+47.0 k^ N⋅m+47.0\,\hat{k}\text{ N}\cdot\text{m} (counterclockwise).

  1. Position vectors from pivot: r⃗1=(0.10−0.60) i^=−0.50 i^ m\vec{r}_1 = (0.10 - 0.60)\,\hat{i} = -0.50\,\hat{i}\text{ m}; r⃗2=(1.40−0.60) i^=+0.80 i^ m\vec{r}_2 = (1.40 - 0.60)\,\hat{i} = +0.80\,\hat{i}\text{ m}.
  2. Torques: τ⃗1=(−0.50 i^)×(−30.0 j^)=+15.0 k^ N⋅m\vec{\tau}_1 = (-0.50\,\hat{i}) \times (-30.0\,\hat{j}) = +15.0\,\hat{k}\text{ N}\cdot\text{m}.
  3. τ⃗2=(+0.80 i^)×(+40.0 j^)=+32.0 k^ N⋅m\vec{\tau}_2 = (+0.80\,\hat{i}) \times (+40.0\,\hat{j}) = +32.0\,\hat{k}\text{ N}\cdot\text{m}.
  4. Net torque: τ⃗net=+15.0 k^+32.0 k^=+47.0 k^ N⋅m\vec{\tau}_{\text{net}} = +15.0\,\hat{k} + 32.0\,\hat{k} = +47.0\,\hat{k}\text{ N}\cdot\text{m}.
Loading workspace…