Resources
In a physical chemistry laboratory, an Abbe refractometer is used to determine the purity of an ethanol sample. A thin film of the liquid sample is sandwiched between an illuminating prism and a high-index measuring prism made of dense flint glass (). Monochromatic light of wavelength (sodium D-line) is directed at grazing incidence (angle of incidence ) across the liquid-prism interface. The telescope crosshairs align with the resulting shadow boundary at a critical refraction angle inside the prism of . Calculate (a) the experimental index of refraction of the liquid to four significant figures, and (b) assuming pure ethanol has , the absolute percentage error of this experimental reading.
Answer and steps
Final answer
(a) ; (b)
Steps
Part (a): Determining the Experimental Refractive Index
An Abbe refractometer operates on the principle of critical angle refraction at the interface between the unknown liquid sample and a measuring prism of known, higher refractive index.
- Apply Snell's Law at the Interface: The boundary condition is given by Snell's Law:
- Substitute Grazing Incidence Conditions: Rays entering the measuring prism from the liquid film reach their maximum possible angle of incidence at grazing incidence, where . Because , the relation simplifies to:
- Calculate : Given and critical refraction angle : Evaluating this product to four significant figures gives:
Part (b): Calculating the Absolute Percentage Error
- Formula for Percentage Error: The percentage error compares the experimental value to the accepted reference value:
- Substitute Values: Using the experimental value and reference index :
Typical errors
01 The student inverted the Snell's law ratio by dividing by sin(θ_prism) instead of multiplying, yielding an impossible refractive index greater than the prism.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
From Snell's law at grazing incidence (), . Since , the relation is , not .
- Step 2Correct
You correctly computed the quotient using your initial formula, but the result is downstream of the inverted Snell's law relationship.
- Step 3Correct
You correctly applied the absolute percentage error definition to your calculated value of , but the resulting percentage error was inflated by the earlier error in part (a).
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled the definition and formula for absolute percentage error.
You accurately looked up the sine value for as approximately .
You maintained clean and consistent arithmetic through your subsequent calculation steps.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeDividing by instead of multiplying by when isolating .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisMisinterpreting the algebraic isolation in Snell's law () at grazing incidence, failing to realize that refractometer measuring prisms must have a higher refractive index than the sample (), which means must be a fraction of .
REASONING PATH
Your ACEpath teacher’s suggested approach- Snell's Law at Grazing Incidence
Always write down the full product form before rearranging terms.
- Physical Boundary Sanity Check
For light entering an Abbe refractometer prism from a liquid, must always hold.
Check that your calculated liquid index is smaller than the prism index (); an index greater than indicates an inverted trigonometric ratio.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply Snell's law with grazing incidence: .
Substitute the known values: .
Compute the absolute percentage error: .
(a) ; (b)
02 The student used the experimental value instead of the accepted pure value as the reference denominator in the percentage error formula.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Percentage error measures deviation relative to the true or accepted reference standard (), so the accepted value must be the denominator, not your experimental result ().
- Step 3Correct
(or using )
Your arithmetic was accurate based on your formula, but the result is skewed because the wrong reference quantity was in the denominator.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly related the critical refraction angle at grazing incidence to the sample's refractive index using Snell's law.
You accurately evaluated the trigonometric term and preserved proper precision throughout your calculation.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the experimental observation as the baseline reference instead of the accepted standard value in the percentage error definition.
REASONING PATH
Your ACEpath teacher’s suggested approach- Reference Standard in Error Analysis
Percentage error is always calculated relative to the true, theoretical, or accepted reference value: .
Always identify the accepted standard first and place it in the denominator before substituting numerical values.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the accepted standard value: .
Substitute into the standard percentage error formula: (or using rounded : ).
(a) (or ); (b) (or depending on rounding intermediate precision)
03 The student evaluated the trigonometric function with the calculator set to radians instead of degrees, producing a physically meaningless negative refractive index.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You evaluated in radians rather than degrees. In degree mode, , yielding rather than .
- Step 3Correct
You applied the percentage error formula correctly, but your result was distorted by the incorrect negative index from step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that grazing incidence reduces Snell's law to .
You applied the standard percentage error formula accurately with absolute difference in the numerator.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou evaluated the sine of an angle given in degrees while your calculator was configured in radian mode.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking calculator angular units (DEG vs. RAD) and missing a physical plausibility check: absolute refractive indices of ordinary liquids are always positive real numbers greater than .
REASONING PATH
Your ACEpath teacher’s suggested approach- Calculator Angle Mode
Whenever an angle is given with a degree symbol (), ensure your calculator displays DEG mode before calculating trigonometric functions.
Check the status bar of your calculator before pressing , , or .
- Physical Reality Check
The absolute refractive index of any optical medium is .
If you obtain a negative value or a value less than for an optical medium, stop and re-check your angle units immediately.
CORRECTED PATH
ACEpath Teacher's DemonstrationSwitch your calculator to DEG mode: .
Multiply by the prism index: , which rounds to (or ).
Substitute into the percentage error formula: .
(a) ; (b)
Lock it in
What is the relationship between the sample index and the Abbe prism index at grazing incidence ()?
. Because , Snell's law simplifies directly to a multiplication.
Similar question
A liquid sample is analyzed using an Abbe refractometer with a prism index of . At grazing incidence, the critical angle inside the prism is measured as . Calculate the refractive index of the liquid to four significant figures.
Answer
.
Key steps:
- Use .
- Calculate .
- Multiply: .
An unknown aqueous solution has a refractive index of . If measured on an Abbe refractometer with prism index , find the critical angle of refraction inside the prism, , in degrees to two decimal places.
Answer
.
Key steps:
- Rearrange Snell's law: .
- Substitute values: .
- Take the inverse sine: .
In a quality control test, a student uses an Abbe refractometer () to measure an oil sample. The measured angle is . The accepted standard index of the oil is . Calculate the experimental index (to four significant figures) and the absolute percentage error.
Answer
, .
Key steps:
- Experimental index: .
- Absolute percentage error: .