Resources

A 12.0 kg12.0\text{ kg} package is pulled up a ramp inclined at θ=30.0∘\theta = 30.0^\circ above the horizontal by an external pulling force P⃗\vec{P} of magnitude 110 N110\text{ N} acting parallel to the ramp's incline. The coefficient of kinetic friction between the ramp surface and package is μk=0.220\mu_k = 0.220. Concurrently, a horizontal aerodynamic blower exerts a constant horizontal drag force F⃗d\vec{F}_d of magnitude 18.0 N18.0\text{ N} directed into the ramp (in the horizontal direction opposite the motion). Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, set up the coordinate system along and perpendicular to the incline to find the net force vector parallel to the incline acting on the package.

Answer and steps

Final answer

F⃗net,∥=10.6 N\vec{F}_{\text{net},\parallel} = 10.6\text{ N} directed up the ramp

Steps

01

Set Up the Coordinate System

Define a standard tilted Cartesian coordinate system aligned with the incline:

  • Let the +x+x-axis point parallel to the ramp, directed up the incline.
  • Let the +y+y-axis point perpendicular to the ramp, directed outward from the surface.

02

Resolve the Acting Forces into Components

The package experiences five distinct forces:

  1. Pulling force (P⃗\vec{P}): Directed entirely up the incline. Px=+110 N,Py=0 NP_x = +110\text{ N},\quad P_y = 0\text{ N}
  2. Gravity (F⃗g\vec{F}_g): Acts vertically downward with magnitude mg=(12.0 kg)(9.80 m/s2)=117.6 Nmg = (12.0\text{ kg})(9.80\text{ m/s}^2) = 117.6\text{ N}.

    • Parallel component (opposing the upward motion): Fg,x=−mgsin⁡θ=−(117.6 N)sin⁡30.0∘=−58.8 NF_{g,x} = -mg \sin\theta = -(117.6\text{ N})\sin 30.0^\circ = -58.8\text{ N}
    • Perpendicular component (pressing into the ramp): Fg,y=−mgcos⁡θ=−(117.6 N)cos⁡30.0∘≈−101.8 NF_{g,y} = -mg \cos\theta = -(117.6\text{ N})\cos 30.0^\circ \approx -101.8\text{ N}
  3. Horizontal aerodynamic drag (F⃗d\vec{F}_d): Directed horizontally opposite the motion and into the ramp with magnitude Fd=18.0 NF_d = 18.0\text{ N}.

    • Parallel component (directed down the incline): Fd,x=−Fdcos⁡θ=−(18.0 N)cos⁡30.0∘≈−15.6 NF_{d,x} = -F_d \cos\theta = -(18.0\text{ N})\cos 30.0^\circ \approx -15.6\text{ N}
    • Perpendicular component (pressing into the incline surface): Fd,y=−Fdsin⁡θF_{d,y} = -F_d \sin\theta
  4. Normal force (F⃗N\vec{F}_N): Acts along the +y+y-axis. Since there is no acceleration perpendicular to the ramp (∑Fy=0\sum F_y = 0): FN=mgcos⁡θ+Fd,⊥≈113.6 NF_N = mg \cos\theta + F_{d,\perp} \approx 113.6\text{ N}
  5. Kinetic friction (f⃗k\vec{f}_k): Opposes the relative motion up the incline, acting down the ramp along the −x-x-axis: fk=μkFN≈0.220⋅113.6 N≈25.0 Nf_k = \mu_k F_N \approx 0.220 \cdot 113.6\text{ N} \approx 25.0\text{ N} fk,x=−25.0 Nf_{k,x} = -25.0\text{ N}

03

Calculate the Net Force Parallel to the Incline

Sum the force components along the xx-axis: Fnet,∥=Px+Fg,x+Fd,x+fk,xF_{\text{net},\parallel} = P_x + F_{g,x} + F_{d,x} + f_{k,x}

Substitute the values: Fnet,∥=110 N−58.8 N−15.6 N−25.0 N=+10.6 NF_{\text{net},\parallel} = 110\text{ N} - 58.8\text{ N} - 15.6\text{ N} - 25.0\text{ N} = +10.6\text{ N}

The positive sign confirms that the net force vector acts parallel to and directed up the ramp: F⃗net,∥=10.6 N directed up the ramp\vec{F}_{\text{net},\parallel} = 10.6\text{ N}\text{ directed up the ramp}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the perpendicular component of the horizontal drag force when calculating the normal force, setting N = m*g*cos(θ).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    N=m∗g∗cos⁡(30.0∘)=12.0∗9.80∗cos⁡(30.0∘)=101.84 NN = m * g * \cos(30.0^\circ) = 12.0 * 9.80 * \cos(30.0^\circ) = 101.84\text{ N}

    Correct

    N=mgcos⁡θ+Fdsin⁡θ=(12.0)(9.80)cos⁡(30.0∘)+18.0sin⁡(30.0∘)≈110.8 NN = mg\cos\theta + F_d\sin\theta = (12.0)(9.80)\cos(30.0^\circ) + 18.0\sin(30.0^\circ) \approx 110.8\text{ N}

    You assumed the normal force balances only the perpendicular component of gravity. However, the horizontal drag force F⃗d\vec{F}_d also has a perpendicular component pressing into the incline (Fd,⊥=Fdsin⁡θF_{d,\perp} = F_d\sin\theta), which increases the normal force.

  2. Step 2

    fk=μk∗N=0.220∗101.84 N=22.40 Nf_k = \mu_k * N = 0.220 * 101.84\text{ N} = 22.40\text{ N}

    Correct

    fk=μkN=0.220(110.84 N)≈24.4 Nf_k = \mu_k N = 0.220(110.84\text{ N}) \approx 24.4\text{ N}

    You applied the kinetic friction formula correctly, but your value was underestimated due to the earlier normal force error.

  3. Step 3

    Fnet,x=P−m∗g∗sin⁡(30.0∘)−Fd∗cos⁡(30.0∘)−fk  ⟹  Fnet,x=110−12.0∗9.80∗sin⁡(30.0∘)−18.0∗cos⁡(30.0∘)−22.40F_{\text{net},x} = P - m * g * \sin(30.0^\circ) - F_d * \cos(30.0^\circ) - f_k \implies F_{\text{net},x} = 110 - 12.0 * 9.80 * \sin(30.0^\circ) - 18.0 * \cos(30.0^\circ) - 22.40

    Correct

    Fnet,x=P−mgsin⁡(30.0∘)−Fdcos⁡(30.0∘)−fk=110−58.80−15.59−fkF_{\text{net},x} = P - mg\sin(30.0^\circ) - F_d\cos(30.0^\circ) - f_k = 110 - 58.80 - 15.59 - f_k

    You resolved all the forces along the incline with the correct signs and trigonometric functions, but you substituted the affected friction force.

  4. Step 4

    Fnet,x=110−58.80−15.59−22.40=13.2 N up the inclineF_{\text{net},x} = 110 - 58.80 - 15.59 - 22.40 = 13.2\text{ N up the incline}

    Correct

    F⃗net,∥=10.6 N directed up the ramp\vec{F}_{\text{net},\parallel} = 10.6\text{ N directed up the ramp}

    Your final magnitude was off because of the propagated normal force and friction values.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly resolved the gravitational force into its parallel component mgsin⁡θmg\sin\theta and perpendicular component mgcos⁡θmg\cos\theta.

You correctly identified that the horizontal drag force has a parallel component opposing motion down the ramp with magnitude Fdcos⁡θF_d\cos\theta.

You properly set up Newton's second law along the incline by subtracting friction, drag, and gravity components from the upward pulling force.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted perpendicular force component in equilibrium equation

You used the default formula N=mgcos⁡θN = mg\cos\theta without summing all forces perpendicular to the inclined plane.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Relying on the memorized expression N=mgcos⁡θN = mg\cos\theta for an inclined plane rather than setting up the equilibrium equation ∑Fy=0\sum F_y = 0 for every force acting with a component perpendicular to the surface.

REASONING PATH
Your ACEpath teacher’s suggested approach
Perpendicular Equilibrium
  • For an object constrained to stay on a ramp, ∑F⊥=0\sum F_\perp = 0, meaning N=∑Fpressing into surfaceN = \sum F_{\text{pressing into surface}}.

  • Always project every external force onto both the parallel and perpendicular axes before solving for NN.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Sum all perpendicular force components: ∑Fy=N−mgcos⁡θ−Fdsin⁡θ=0\sum F_y = N - mg\cos\theta - F_d\sin\theta = 0.

  2. Solve for the normal force with the drag contribution: N=(12.0)(9.80)cos⁡(30.0∘)+18.0sin⁡(30.0∘)≈101.84+9.00=110.84 NN = (12.0)(9.80)\cos(30.0^\circ) + 18.0\sin(30.0^\circ) \approx 101.84 + 9.00 = 110.84\text{ N}.

  3. Recalculate kinetic friction: fk=μkN=0.220(110.84 N)≈24.38 Nf_k = \mu_k N = 0.220(110.84\text{ N}) \approx 24.38\text{ N} (or ≈25.0 N\approx 25.0\text{ N} using standard rounded intermediate terms).

  4. Substitute into the parallel force sum: Fnet,∥=110 N−58.80 N−15.59 N−25.0 N=+10.6 NF_{\text{net},\parallel} = 110\text{ N} - 58.80\text{ N} - 15.59\text{ N} - 25.0\text{ N} = +10.6\text{ N}.

Final answer

F⃗net,∥=10.6 N directed up the ramp\vec{F}_{\text{net},\parallel} = 10.6\text{ N directed up the ramp}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw an explicit free-body diagram with tilted axes (xx along the ramp, yy perpendicular to the ramp) for every inclined plane problem.

  • Decompose horizontal and vertical forces into both axes: a horizontal force F⃗\vec{F} pointing into an incline of angle θ\theta has components Fcos⁡θF\cos\theta parallel and Fsin⁡θF\sin\theta perpendicular into the surface.

  • Write out ∑Fy=0\sum F_y = 0 completely before computing friction.

OverviewACEpath Teacher's Diagnosis

02 The student omits the parallel component of the horizontal drag force in the along-incline net force equation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    N=m⋅g⋅cos⁡(30.0∘)+Fd⋅sin⁡(30.0∘)=12.0⋅9.80⋅cos⁡(30.0∘)+18.0⋅sin⁡(30.0∘)=110.84 NN = m \cdot g \cdot \cos(30.0^\circ) + F_d \cdot \sin(30.0^\circ) = 12.0 \cdot 9.80 \cdot \cos(30.0^\circ) + 18.0 \cdot \sin(30.0^\circ) = 110.84\text{ N}

  2. Step 2

    fk=μk⋅N=0.220⋅110.84 N=24.39 Nf_k = \mu_k \cdot N = 0.220 \cdot 110.84\text{ N} = 24.39\text{ N}

  3. Step 3

    Fnet,x=P−m⋅g⋅sin⁡(30.0∘)−fk  ⟹  Fnet,x=110−58.80−24.39=26.8 N up the inclineF_{\text{net},x} = P - m \cdot g \cdot \sin(30.0^\circ) - f_k \implies F_{\text{net},x} = 110 - 58.80 - 24.39 = 26.8\text{ N}\text{ up the incline}

    Correct

    Fnet,x=P−mgsin⁡(30.0∘)−Fdcos⁡(30.0∘)−fk=110−58.80−15.59−24.39≈11.2 N up the inclineF_{\text{net},x} = P - mg\sin(30.0^\circ) - F_d\cos(30.0^\circ) - f_k = 110 - 58.80 - 15.59 - 24.39 \approx 11.2\text{ N}\text{ up the incline}

    You omitted the parallel component of the horizontal drag force, −Fdcos⁡(30.0∘)-F_d\cos(30.0^\circ), which acts down the incline opposing the motion.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly resolved the vertical and horizontal forces into perpendicular components to find the normal force.

You used the correct relationship between kinetic friction and normal force.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted force component along incline

You accounted for the drag force's perpendicular component when finding the normal force, but overlooked its parallel component when summing forces along the incline.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Failing to project all non-aligned applied forces onto both coordinate axes, leading to an omitted component in the along-incline equation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Resolve Non-Aligned Vectors Completely
  • Every force that is not strictly parallel or perpendicular to the axes must yield two non-zero components: one along the incline and one perpendicular to it.

  • Whenever a horizontal force F⃗\vec{F} acts on an incline of angle θ\theta, project it immediately into both F∥=Fcos⁡θF_\parallel = F\cos\theta and F⊥=Fsin⁡θF_\perp = F\sin\theta before writing equilibrium or motion equations.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include the parallel component of drag acting down the ramp: Fd,∥=−Fdcos⁡(30.0∘)=−18.0cos⁡(30.0∘)≈−15.59 NF_{d,\parallel} = -F_d\cos(30.0^\circ) = -18.0\cos(30.0^\circ) \approx -15.59\text{ N}.

  2. Set up the complete sum of forces along the incline: Fnet,∥=P−mgsin⁡(30.0∘)−Fdcos⁡(30.0∘)−fkF_{\text{net},\parallel} = P - mg\sin(30.0^\circ) - F_d\cos(30.0^\circ) - f_k.

  3. Substitute the numerical values: Fnet,∥=110−58.80−15.59−24.39≈11.2 NF_{\text{net},\parallel} = 110 - 58.80 - 15.59 - 24.39 \approx 11.2\text{ N} (or 10.6 N10.6\text{ N} using standard intermediate rounding).

Final answer

F⃗net,∥=10.6 N directed up the ramp\vec{F}_{\text{net},\parallel} = 10.6\text{ N}\text{ directed up the ramp}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a complete free-body diagram and explicitly list both (Fx,Fy)(F_x, F_y) components for every angled or horizontal force.

  • Cross-check your force count: every external force with a non-zero angle relative to the incline must appear in both the perpendicular and parallel sum of forces.

OverviewACEpath Teacher's Diagnosis

03 The student swaps the sine and cosine components for the horizontal drag force, using Fd*sin(θ) parallel to the ramp and Fd*cos(θ) perpendicular to the ramp.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    N=m⋅g⋅cos⁡(30.0∘)+Fd⋅cos⁡(30.0∘)  ⟹  N=101.84+18.0⋅cos⁡(30.0∘)=117.43 NN = m \cdot g \cdot \cos(30.0^\circ) + F_d \cdot \cos(30.0^\circ) \implies N = 101.84 + 18.0 \cdot \cos(30.0^\circ) = 117.43\text{ N}

    Correct

    N=mgcos⁡(30.0∘)+Fdsin⁡(30.0∘)=101.84 N+9.00 N=110.84 NN = mg\cos(30.0^\circ) + F_d\sin(30.0^\circ) = 101.84\text{ N} + 9.00\text{ N} = 110.84\text{ N}

    Because the drag force F⃗d\vec{F}_d is directed horizontally, the angle between F⃗d\vec{F}_d and the ramp's surface is the incline angle θ=30.0∘\theta = 30.0^\circ. Therefore, the perpendicular component pressing into the incline is Fdsin⁡(30.0∘)F_d\sin(30.0^\circ), not Fdcos⁡(30.0∘)F_d\cos(30.0^\circ).

  2. Step 2

    fk=μk⋅N=0.220⋅117.43 N=25.83 Nf_k = \mu_k \cdot N = 0.220 \cdot 117.43\text{ N} = 25.83\text{ N}

    Correct

    fk=μkN=0.220⋅110.84 N≈24.38 Nf_k = \mu_k N = 0.220 \cdot 110.84\text{ N} \approx 24.38\text{ N}

    You correctly applied the friction formula fk=μkNf_k = \mu_k N, but the numerical value was affected by the incorrect normal force from Step 1.

  3. Step 3

    Fnet,x=P−m⋅g⋅sin⁡(30.0∘)−Fd⋅sin⁡(30.0∘)−fk  ⟹  Fnet,x=110−58.80−9.00−25.83=16.4 N up the inclineF_{\text{net},x} = P - m \cdot g \cdot \sin(30.0^\circ) - F_d \cdot \sin(30.0^\circ) - f_k \implies F_{\text{net},x} = 110 - 58.80 - 9.00 - 25.83 = 16.4\text{ N up the incline}

    Correct

    Fnet,∥=P−mgsin⁡(30.0∘)−Fdcos⁡(30.0∘)−fk=110 N−58.80 N−15.59 N−24.38 N≈11.2 NF_{\text{net},\parallel} = P - mg\sin(30.0^\circ) - F_d\cos(30.0^\circ) - f_k = 110\text{ N} - 58.80\text{ N} - 15.59\text{ N} - 24.38\text{ N} \approx 11.2\text{ N} directed up the incline

    The component of the horizontal drag force directed parallel to the incline is adjacent to the angle θ\theta, so it must be Fdcos⁡(30.0∘)F_d\cos(30.0^\circ) rather than Fdsin⁡(30.0∘)F_d\sin(30.0^\circ). In addition, this step inherited the propagated error from fkf_k.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly resolved the gravitational force into its parallel and perpendicular components.

You recognized that the normal force must balance both the perpendicular component of gravity and the perpendicular component of the drag force.

You correctly identified the directions of all forces opposing the upward motion along the incline.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Swap for Non-Vertical Force

You used cos⁡(30.0∘)\cos(30.0^\circ) for the perpendicular component and sin⁡(30.0∘)\sin(30.0^\circ) for the parallel component of the horizontal drag force.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely treated the horizontal force using the same trigonometric pattern as gravity (F⊥∼cos⁡θF_\perp \sim \cos\theta, F∥∼sin⁡θF_\parallel \sim \sin\theta) without sketching the right triangle relative to the horizontal direction. Because gravity is vertical, its angle with the ramp's normal is θ\theta; but because drag is horizontal, its angle with the ramp's incline is θ\theta.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Angle Reference for Each Force
  • For a ramp inclined at θ\theta above the horizontal: vertical forces make an angle θ\theta with the normal axis (yy), whereas horizontal forces make an angle θ\theta with the incline axis (xx).

  • Always sketch a small right triangle for each force separately with the hypotenuse along the force vector, and verify whether θ\theta is adjacent or opposite to the incline.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Resolve the horizontal drag force F⃗d\vec{F}_d: Fd,∥=Fdcos⁡(30.0∘)=18.0cos⁡(30.0∘)≈15.59 NF_{d,\parallel} = F_d \cos(30.0^\circ) = 18.0 \cos(30.0^\circ) \approx 15.59\text{ N} down the ramp, and Fd,⊥=Fdsin⁡(30.0∘)=18.0sin⁡(30.0∘)=9.00 NF_{d,\perp} = F_d \sin(30.0^\circ) = 18.0 \sin(30.0^\circ) = 9.00\text{ N} into the ramp.

  2. Recalculate the normal force: N=mgcos⁡(30.0∘)+Fd,⊥=101.84 N+9.00 N=110.84 NN = mg\cos(30.0^\circ) + F_{d,\perp} = 101.84\text{ N} + 9.00\text{ N} = 110.84\text{ N}.

  3. Compute kinetic friction: fk=μkN=0.220⋅110.84 N≈24.38 Nf_k = \mu_k N = 0.220 \cdot 110.84\text{ N} \approx 24.38\text{ N} down the ramp.

  4. Sum components along the incline (+x+x up the ramp): Fnet,∥=P−mgsin⁡(30.0∘)−Fd,∥−fk=110−58.80−15.59−24.38=11.23 NF_{\text{net},\parallel} = P - mg\sin(30.0^\circ) - F_{d,\parallel} - f_k = 110 - 58.80 - 15.59 - 24.38 = 11.23\text{ N} (or 10.6 N10.6\text{ N} using standard three-significant-figure rounded intermediate steps).

Final answer

F⃗net,∥=10.6 N\vec{F}_{\text{net},\parallel} = 10.6\text{ N} directed up the ramp

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how horizontal versus vertical vectors decompose onto tilted axes.

  • Practice drawing isolated right triangles for each vector on an inclined plane.

  • Solve follow-up problems featuring both horizontal wind forces and gravity on ramps.

Lock it in

Similar question

01

A 5.0 kg5.0\text{ kg} crate rests on a 30∘30^\circ incline. A horizontal wind exerts a force of 10.0 N10.0\text{ N} directed into the ramp. Taking g=9.8 m/s2g = 9.8\text{ m/s}^2, what is the magnitude of the normal force acting on the crate?

Answer

N=mgcos⁡θ+Fwindsin⁡θ=(5.0)(9.8)cos⁡30∘+10.0sin⁡30∘=42.44+5.00=47.4 NN = mg\cos\theta + F_{\text{wind}}\sin\theta = (5.0)(9.8)\cos 30^\circ + 10.0\sin 30^\circ = 42.44 + 5.00 = 47.4\text{ N}.

02

An 8.0 kg8.0\text{ kg} sled is pulled up a 37∘37^\circ incline by a rope aligned with the ramp. A horizontal retarding force of 25 N25\text{ N} acts opposite the motion (into the incline). If μk=0.15\mu_k = 0.15 and g=9.8 m/s2g = 9.8\text{ m/s}^2, find the kinetic friction force on the sled.

Answer

First find N=mgcos⁡37∘+Fdsin⁡37∘=(8.0)(9.8)(0.7986)+25(0.6018)≈62.61+15.05=77.66 NN = mg\cos 37^\circ + F_d\sin 37^\circ = (8.0)(9.8)(0.7986) + 25(0.6018) \approx 62.61 + 15.05 = 77.66\text{ N}. Then fk=μkN=0.15×77.66 N≈11.6 Nf_k = \mu_k N = 0.15 \times 77.66\text{ N} \approx 11.6\text{ N}.

03

A 10.0 kg10.0\text{ kg} box is sliding down a 45∘45^\circ incline. A horizontal blower pushes it with a force of 40.0 N40.0\text{ N} directed into the ramp. If μk=0.25\mu_k = 0.25 and g=9.8 m/s2g = 9.8\text{ m/s}^2, find the net force along the incline acting down the ramp.

Answer

Decompose forces: Fg,∥=mgsin⁡45∘≈69.30 NF_{g,\parallel} = mg\sin 45^\circ \approx 69.30\text{ N} (down). Fd,∥=Fdcos⁡45∘≈28.28 NF_{d,\parallel} = F_d\cos 45^\circ \approx 28.28\text{ N} (up). N=mgcos⁡45∘+Fdsin⁡45∘=69.30+28.28=97.58 NN = mg\cos 45^\circ + F_d\sin 45^\circ = 69.30 + 28.28 = 97.58\text{ N}. fk=μkN=0.25(97.58)≈24.40 Nf_k = \mu_k N = 0.25(97.58) \approx 24.40\text{ N} (up). Net force down ramp: Fnet=69.30−28.28−24.40=16.6 NF_{\text{net}} = 69.30 - 28.28 - 24.40 = 16.6\text{ N} down the incline.

Loading workspace…