Resources
An untethered astronaut with suit and equipment has a total mass of and is initially at rest relative to a nearby space station. To initiate motion toward the airlock, the astronaut activates a handheld propulsion thruster that expels cold nitrogen gas at an average mass flow rate of with an exhaust speed of relative to the astronaut. If the thruster fires continuously in a fixed direction for a duration of , calculate the resulting recoil speed of the astronaut in meters per second ().
Answer and steps
Final answer
Steps
Identify the Given Quantities and Convert Units
- Initial total mass:
- Initial velocity relative to the space station:
- Mass flow rate:
- Relative exhaust speed:
- Burn duration:
Determine the Mass of Expelled Gas and Final Mass
The total mass of the nitrogen gas expelled during the firing interval is:
The remaining mass of the astronaut and equipment after the burn is:
Apply the Rocket Equation (Conservation of Momentum)
Because the system is isolated (no external forces act on the astronaut-gas system in deep space), the change in velocity for variable-mass propulsion is governed by the Tsiolkovsky rocket equation:
Since :
Substitute the numerical values:
Evaluating the natural logarithm:
Alternative Method: Impulse-Momentum Approximation
Because the expelled propellant mass is extremely small compared to the total mass (), the thrust force can be treated as constant:
The total impulse delivered to the astronaut is:
Using the impulse-momentum theorem with the average mass :
Both methods yield the same result to three significant figures: .
Typical errors
01 The student forgets to convert the exhaust speed from km/s to m/s, yielding a speed that is three orders of magnitude too small.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You used the numerical value directly without converting the exhaust speed from to standard SI units of ().
- Step 3Correct
Your algebraic method using is valid, but the resulting numerical value is off by three orders of magnitude due to the earlier unit conversion error in .
WHAT YOU DID WELL
Compliments from Your TeacherYou converted the propellant mass flow rate correctly to SI units ().
You recognized that impulse can be expressed as .
You correctly used the impulse-momentum theorem to relate the total impulse to the astronaut's recoil velocity.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou dropped the prefix multiplier when copying , treating it as .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou did not write out and check base SI units for all given quantities before substituting them into the physical formulas.
REASONING PATH
Your ACEpath teacher’s suggested approach- SI Base Unit Check
Every kinematic and dynamical quantity in Newton's second law and momentum equations must be in standard SI base units (meters, kilograms, seconds) before computing.
Always write down the full unit with each variable. If a velocity is given in , multiply by to convert it to before substitution.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the exhaust speed to meters per second: .
Recalculate the impulse delivered by the expelled gas: .
Divide by the total mass: .
02 The student forgets to convert the mass flow rate from grams per second to kilograms per second, resulting in a recoil speed that is a factor of 1000 too large.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You used without converting grams per second to kilograms per second (). In SI units, the mass flow rate must be in to yield impulse in newton-seconds.
- Step 3Correct
Your application of is mathematically and conceptually sound, but the numerical answer inherits the factor-of- error from the impulse.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified and applied the impulse-momentum relationship .
You successfully converted the exhaust speed from to .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted directly into standard SI formulas without converting grams to kilograms.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisWhenever you combine mass or mass flow rate with standard mechanical units (like newtons, joules, or meters per second), the mass unit must be kilograms (). Leaving mass in grams () overstates forces and impulses by a factor of .
REASONING PATH
Your ACEpath teacher’s suggested approach- Standard SI Base Units for Mass
In all SI mechanics equations (, , ), mass must be expressed in kilograms (), not grams ().
Always check the unit of mass flow rate () or mass () before multiplying; convert to by multiplying by .
- Physical Sanity Check on Speed
A small handheld gas thruster firing for cannot accelerate a astronaut to (over Mach ).
Compare the calculated speed to realistic human motion in space; a fraction of a meter per second is reasonable, whereas hundreds of meters per second indicates an exponent or unit scale error.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the mass flow rate to SI units: .
Calculate the correct impulse: .
Divide the impulse by the astronaut's mass: .
03 The student mistakenly treats the mass flow rate as the total expelled mass without multiplying by the duration of the burn.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You converted the unit from grams to kilograms correctly, but you set the total expelled mass equal to the flow rate instead of multiplying by the burn time .
- Step 2Correct
Your formula and arithmetic were carried out correctly, but the value was evaluated using the incorrect expelled mass from Step 1. Notice that actually represents the thrust force, not the total impulse.
- Step 3Correct
You correctly applied the relationship , but the resulting speed corresponds to acceleration rather than the final velocity over .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the exhaust speed from to .
You accurately converted grams to kilograms.
You correctly set up the momentum recoil relationship .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou equated the given mass flow rate of directly to the expelled mass without multiplying by the duration .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing a rate of mass transfer (measured in ) with an accumulated quantity of mass (measured in ), which caused you to compute thrust force () instead of total impulse ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Check the Units of Given Quantities
A rate of change with units of must be multiplied by elapsed time to yield total mass.
Always verify units before plugging in: .
- Distinguish Force from Impulse
Thrust is a force (), whereas the momentum change is impulse ().
Check whether your calculated momentum has units of or .
CORRECTED PATH
ACEpath Teacher's DemonstrationMultiply the mass flow rate by duration: .
Calculate the total impulse delivered by the gas: .
Apply conservation of momentum: .
Lock it in
How do you convert a velocity expressed in kilometers per second () to standard SI units ()?
Multiply by (or ). Because , .
Similar question
A satellite in deep space fires a cold-gas thruster that ejects propellant at relative to the satellite. The thruster expels gas at a constant rate of for . Assuming the expelled mass is negligible compared to the satellite mass, calculate the change in speed of the satellite in .
Answer
First convert units: and . The total impulse is . The change in speed is .
A space probe of mass is drifting at . It fires an ion engine producing an exhaust velocity of in the opposite direction of its motion. The engine consumes of propellant per second for a duration of . Find the probe's new speed in .
Answer
Convert units: and . Total propellant consumed is . The thrust is . Total impulse is . The increase in speed is . The final speed is .
An astronaut of total mass is stranded at rest away from a spacecraft airlock. Using a nitrogen jet with exhaust speed and mass flow rate , for how many seconds must the jet fire so that the astronaut reaches the airlock in exactly ? (Assume the burn time is short compared to ).
Answer
The required constant drift speed to cover in is . Convert units: and . The thrust force is . Using impulse-momentum, .