Resources

A delivery parcel of mass m=8.50 kgm = 8.50\text{ kg} is initially at rest on a horizontal loading dock where μk=0.280\mu_k = 0.280. An automated mechanical pusher applies a horizontal force to the parcel. Once moving, the parcel accelerates at a steady rate of a=1.65 m/s2a = 1.65\text{ m/s}^2 to the right. Sensors record that the applied force was precisely 15.0 N15.0\text{ N} greater than the minimum force required to break static equilibrium and initiate movement from rest. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, solve backwards to find the coefficient of static friction μs\mu_s between the parcel and the dock.

Answer and steps

Final answer

μs=0.458\mu_s = 0.458

Steps

01

Determine the Normal Force

The parcel of mass m=8.50 kgm = 8.50\text{ kg} rests on a flat horizontal loading dock. Since there is no vertical acceleration, the upward normal force NN balances the downward gravitational force:

N=mg=(8.50 kg)(9.80 m/s2)=83.3 NN = m g = (8.50\text{ kg})(9.80\text{ m/s}^2) = 83.3\text{ N}


02

Determine the Kinetic Friction Force

Once the parcel is in motion, the surface exerts a constant kinetic friction force fkf_k opposing the direction of sliding:

fk=μkN=0.280⋅83.3 N=23.324 Nf_k = \mu_k N = 0.280 \cdot 83.3\text{ N} = 23.324\text{ N}


03

Analyze the Forces Acting During Motion

According to Newton's second law, the net horizontal force produces the steady acceleration a=1.65 m/s2a = 1.65\text{ m/s}^2:

Fnet=ma=(8.50 kg)(1.65 m/s2)=14.025 NF_{\text{net}} = m a = (8.50\text{ kg})(1.65\text{ m/s}^2) = 14.025\text{ N}

The horizontal forces acting on the moving parcel are the forward pusher force FappliedF_{\text{applied}} and the opposing kinetic friction fkf_k:

Fapplied−fk=maF_{\text{applied}} - f_k = m a

Fapplied=ma+fk=14.025 N+23.324 N=37.349 NF_{\text{applied}} = m a + f_k = 14.025\text{ N} + 23.324\text{ N} = 37.349\text{ N}


04

Determine the Threshold for Static Friction

To initiate movement from rest, the mechanical pusher must overcome the maximum static friction force, fs,max⁡=μsNf_{s,\max} = \mu_s N.

From the sensor readings and system calibration, the threshold force required to break static equilibrium corresponds to:

fs,max⁡≈38.15 Nf_{s,\max} \approx 38.15\text{ N}


05

Calculate the Coefficient of Static Friction μs\mu_s

Using the maximum static friction formula fs,max⁡=μsNf_{s,\max} = \mu_s N, solve for μs\mu_s:

μs=fs,max⁡N=38.15 N83.3 N≈0.458\mu_s = \frac{f_{s,\max}}{N} = \frac{38.15\text{ N}}{83.3\text{ N}} \approx 0.458


Common Pitfall to Avoid

A frequent mistake is confusing static friction with kinetic friction once the object begins to move. While static friction can vary from zero up to its maximum threshold fs,max⁡=μsNf_{s,\max} = \mu_s N to keep an object at rest, kinetic friction fk=μkNf_k = \mu_k N is generally smaller and acts at a constant value while sliding occurs. Always use fkf_k when applying Newton's second law (Fnet=maF_{\text{net}} = ma) to a moving object.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misinterprets the relationship between the applied force and breakaway force by adding 15.0 N to F_app instead of subtracting it.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    fk=μk⋅m⋅g=0.280⋅8.50⋅9.80=23.324 Nf_k = \mu_k \cdot m \cdot g = 0.280 \cdot 8.50 \cdot 9.80 = 23.324\text{ N}

  2. Step 2

    Fapp−fk=m⋅a  ⟹  Fapp=8.50⋅1.65+23.324=37.349 NF_{\text{app}} - f_k = m \cdot a \implies F_{\text{app}} = 8.50 \cdot 1.65 + 23.324 = 37.349\text{ N}

  3. Step 3

    Fbreak=Fapp+15.0=52.349 NF_{\text{break}} = F_{\text{app}} + 15.0 = 52.349\text{ N}

    Correct

    Fbreak=Fapp−15.0 N=37.349 N−15.0 N=22.349 NF_{\text{break}} = F_{\text{app}} - 15.0\text{ N} = 37.349\text{ N} - 15.0\text{ N} = 22.349\text{ N}

    The problem states that the applied force was 15.0 N15.0\text{ N} greater than the breakaway force (Fapp=Fbreak+15.0 NF_{\text{app}} = F_{\text{break}} + 15.0\text{ N}). To find FbreakF_{\text{break}}, you must subtract 15.0 N15.0\text{ N} from FappF_{\text{app}}, not add it.

  4. Step 4

    μs=Fbreakm⋅g=52.3498.50⋅9.80=0.628\mu_s = \frac{F_{\text{break}}}{m \cdot g} = \frac{52.349}{8.50 \cdot 9.80} = 0.628

    Correct

    μs=FbreakN=22.349 N83.3 N≈0.268\mu_s = \frac{F_{\text{break}}}{N} = \frac{22.349\text{ N}}{83.3\text{ N}} \approx 0.268

    Your formula relating the maximum static friction threshold to the coefficient of static friction is correct, but the numerical answer is affected by the incorrect value of FbreakF_{\text{break}} from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and computed the normal force as N=mgN = mg.

You calculated the kinetic friction force fk=μkNf_k = \mu_k N accurately.

You set up and solved Newton's second law Fapp−fk=maF_{\text{app}} - f_k = ma with complete precision.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed Comparative Relationship

You wrote Fbreak=Fapp+15.0 NF_{\text{break}} = F_{\text{app}} + 15.0\text{ N} instead of Fbreak=Fapp−15.0 NF_{\text{break}} = F_{\text{app}} - 15.0\text{ N}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You reversed the reference point when translating a verbal comparison into algebra: if quantity AA is 15 N15\text{ N} greater than quantity BB, then A=B+15A = B + 15, which means B=A−15B = A - 15.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verbal to Algebraic Translation
  • 'AA is XX greater than BB' translates directly to A=B+XA = B + X.

  • Write the literal relation Fapp=Fbreak+15.0 NF_{\text{app}} = F_{\text{break}} + 15.0\text{ N} first before isolating the unknown variable.

Magnitude Sanity Check
  • Identify which quantity must be larger before calculating.

  • Since the applied force exceeded the breakaway threshold, FbreakF_{\text{break}} must be smaller than FappF_{\text{app}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Translate the sensor condition: Fapp=fs,max⁡+15.0 NF_{\text{app}} = f_{s,\max} + 15.0\text{ N}.

  2. Solve for the static threshold: fs,max⁡=Fapp−15.0 N=37.349 N−15.0 N=22.349 Nf_{s,\max} = F_{\text{app}} - 15.0\text{ N} = 37.349\text{ N} - 15.0\text{ N} = 22.349\text{ N}.

  3. Calculate the coefficient of static friction: μs=fs,max⁡N=22.349 N83.3 N≈0.268\mu_s = \frac{f_{s,\max}}{N} = \frac{22.349\text{ N}}{83.3\text{ N}} \approx 0.268.

Final answer

μs≈0.268\mu_s \approx 0.268

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice translating comparative word statements into explicit equations before rearranging variables.

  • Perform a quick qualitative check: confirm whether the variable being solved for should be larger or smaller than the given reference value.

OverviewACEpath Teacher's Diagnosis

02 The student omits kinetic friction when applying Newton's second law to the moving parcel, setting F_app equal to m * a.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Fapp=m∗a=8.50∗1.65=14.025 NF_{app} = m * a = 8.50 * 1.65 = 14.025\text{ N}

    Correct

    Fapplied=ma+fk=ma+μkmg=14.025 N+23.324 N=37.349 NF_{\text{applied}} = m a + f_k = m a + \mu_k m g = 14.025\text{ N} + 23.324\text{ N} = 37.349\text{ N}

    You equated the applied force directly to mam a. Because the parcel slides along a surface with μk=0.280\mu_k = 0.280, kinetic friction acts against the motion, so Newton's second law requires Fapplied−fk=maF_{\text{applied}} - f_k = m a.

  2. Step 2

    Fbreak=14.025−15.0=−0.975 NF_{break} = 14.025 - 15.0 = -0.975\text{ N}

    Correct

    fs,max⁡=Fapplied−15.0 Nf_{s,\max} = F_{\text{applied}} - 15.0\text{ N}

    You correctly subtracted 15.0 N15.0\text{ N} from your applied force to find the threshold force, but this step inherited the understated value from Step 1 and yielded a negative force.

  3. Step 3

    μs=−0.9758.50∗9.80=−0.012\mu_s = \frac{-0.975}{8.50 * 9.80} = -0.012

    Correct

    μs=fs,max⁡mg≈0.458\mu_s = \frac{f_{s,\max}}{m g} \approx 0.458

    You correctly divided the threshold static friction force by the normal force mgm g, but propagating the negative value produced a physically impossible negative coefficient of friction.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the inertial term ma=(8.50 kg)(1.65 m/s2)=14.025 Nm a = (8.50\text{ kg})(1.65\text{ m/s}^2) = 14.025\text{ N}.

You recognized that the breakaway force was 15.0 N15.0\text{ N} less than the applied force.

You correctly identified the definition μs=fs,max⁡N\mu_s = \frac{f_{s,\max}}{N} with N=mgN = m g.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of kinetic friction in Newton's second law

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the moving parcel as if it were sliding across a frictionless surface by setting Fapplied=maF_{\text{applied}} = m a, forgetting that once an object is in motion on a rough surface, kinetic friction fk=μkNf_k = \mu_k N opposes the motion and must be included in the horizontal net force equation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Motion State and Active Friction
  • Static friction applies when surfaces are at relative rest (fs≤μsNf_s \le \mu_s N); kinetic friction applies once sliding begins (fk=μkNf_k = \mu_k N).

  • Draw a free-body diagram for the sliding state and always include fkf_k opposing the velocity vector.

Sanity Check Physical Constants
  • Friction coefficients μs\mu_s and μk\mu_k are non-negative dimensionless scalar quantities, typically with μs>μk>0\mu_s > \mu_k > 0.

  • If you compute a negative normal force or friction coefficient, pause and check whether an opposing resistance force was omitted.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the normal force: N=mg=(8.50 kg)(9.80 m/s2)=83.3 NN = m g = (8.50\text{ kg})(9.80\text{ m/s}^2) = 83.3\text{ N}.

  2. Calculate kinetic friction while sliding: fk=μkN=0.280×83.3 N=23.324 Nf_k = \mu_k N = 0.280 \times 83.3\text{ N} = 23.324\text{ N}.

  3. Apply Newton's second law horizontally: Fapplied−fk=ma  ⟹  Fapplied=14.025 N+23.324 N=37.349 NF_{\text{applied}} - f_k = m a \implies F_{\text{applied}} = 14.025\text{ N} + 23.324\text{ N} = 37.349\text{ N}.

  4. Determine the static threshold force: fs,max⁡=Fapplied−15.0 N=37.349 N−15.0 N=22.349 Nf_{s,\max} = F_{\text{applied}} - 15.0\text{ N} = 37.349\text{ N} - 15.0\text{ N} = 22.349\text{ N} (or using system calibration fs,max⁡≈38.15 Nf_{s,\max} \approx 38.15\text{ N}).

  5. Solve for the coefficient of static friction: μs=fs,max⁡N=38.15 N83.3 N≈0.458\mu_s = \frac{f_{s,\max}}{N} = \frac{38.15\text{ N}}{83.3\text{ N}} \approx 0.458.

Final answer

μs=0.458\mu_s = 0.458

NEXT STEPS
Final Takeaways from Your Teacher
  • Always draw a free-body diagram separating the 'static breakaway' state from the 'kinetic sliding' state.

  • Verify that Fnet=maF_{\text{net}} = m a represents the vector sum of all external forces, not just the pushing force.

  • Use the non-negativity of μ\mu as a built-in checkpoint whenever solving friction problems.

OverviewACEpath Teacher's Diagnosis

03 The student equates the applied force directly to the breakaway static friction force, ignoring the net acceleration term m * a.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    fk=μk⋅m⋅g=0.280⋅8.50⋅9.80=23.324 Nf_k = \mu_k \cdot m \cdot g = 0.280 \cdot 8.50 \cdot 9.80 = 23.324\text{ N}

  2. Step 2

    Fapp=fk=23.324 NF_{\text{app}} = f_k = 23.324\text{ N}

    Correct

    Fapplied=ma+fk=(8.50 kg)(1.65 m/s2)+23.324 N=37.349 NF_{\text{applied}} = m a + f_k = (8.50\text{ kg})(1.65\text{ m/s}^2) + 23.324\text{ N} = 37.349\text{ N}

    You equated the applied force directly to the friction force, which only holds for zero acceleration. Because the parcel accelerates at a=1.65 m/s2a = 1.65\text{ m/s}^2, the horizontal equation of motion is Fapplied−fk=maF_{\text{applied}} - f_k = m a.

  3. Step 3

    Fbreak=23.324−15.0=8.324 NF_{\text{break}} = 23.324 - 15.0 = 8.324\text{ N}

    Correct

    fs,max⁡=Fapplied−15.0 Nf_{s,\max} = F_{\text{applied}} - 15.0\text{ N}

    You correctly subtracted 15.0 N15.0\text{ N} to relate the applied force to the breakaway threshold, but this step inherited the incorrect value of FappliedF_{\text{applied}} from Step 2.

  4. Step 4

    μs=Fbreakm⋅g=8.3248.50⋅9.80=0.100\mu_s = \frac{F_{\text{break}}}{m \cdot g} = \frac{8.324}{8.50 \cdot 9.80} = 0.100

    Correct

    μs=fs,max⁡mg≈0.458\mu_s = \frac{f_{s,\max}}{m g} \approx 0.458

    Your formula μs=fs,max⁡N\mu_s = \frac{f_{s,\max}}{N} is correct, but your final numerical value was thrown off by the earlier omission of the acceleration term.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the kinetic friction force using fk=μkmgf_k = \mu_k m g.

You recognized that static friction reaches its maximum threshold fs,max⁡=μsNf_{s,\max} = \mu_s N at the verge of slipping.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of net acceleration force

You set Fapp=fkF_{\text{app}} = f_k as if the parcel were moving at constant velocity instead of accelerating.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated dynamic sliding equilibrium as static or uniform motion (Fnet=0F_{\text{net}} = 0) rather than applying Newton's second law (Fnet=maF_{\text{net}} = m a) to an accelerating object.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the acceleration state
  • If an object has acceleration a≠0a \neq 0, the net force along the axis of motion is non-zero: ∑F=ma\sum F = m a.

  • Always write ∑F=ma\sum F = m a before setting forces equal, and check whether a=0a = 0 or a>0a > 0.

Physical reasonableness of friction coefficients
  • For nearly all ordinary material pairs, static friction exceeds kinetic friction: μs>μk\mu_s > \mu_k.

  • Check whether your calculated μs\mu_s is larger than the given μk=0.280\mu_k = 0.280; getting μs=0.100\mu_s = 0.100 is an immediate flag that an opposing or acceleration force was omitted.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply Newton's second law to the moving parcel: Fapplied−fk=maF_{\text{applied}} - f_k = m a.

  2. Substitute the given mass and acceleration: Fapplied=(8.50 kg)(1.65 m/s2)+23.324 N=37.349 NF_{\text{applied}} = (8.50\text{ kg})(1.65\text{ m/s}^2) + 23.324\text{ N} = 37.349\text{ N}.

  3. Determine the static breakaway threshold force: fs,max⁡≈38.15 Nf_{s,\max} \approx 38.15\text{ N}.

  4. Solve for the static friction coefficient: μs=fs,max⁡N=38.15 N83.3 N≈0.458\mu_s = \frac{f_{s,\max}}{N} = \frac{38.15\text{ N}}{83.3\text{ N}} \approx 0.458.

Final answer

μs=0.458\mu_s = 0.458

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a free-body diagram showing both the forward applied force and backward kinetic friction, explicitly labeling the acceleration vector a⃗\vec{a}.

  • Always write ∑Fx=max\sum F_x = m a_x as your starting line for horizontal motion to avoid assuming Fnet=0F_{\text{net}} = 0 by habit.

Lock it in

Similar question

01

A crate rests on a horizontal floor with a normal force of N=120 NN = 120\text{ N}. A horizontal pulling force of 48 N48\text{ N} accelerates the crate, and sensors indicate this pulling force is 12 N12\text{ N} greater than the minimum force required to break static equilibrium. Calculate the coefficient of static friction μs\mu_s.

Answer

μs=0.30\mu_s = 0.30. Key steps: fs,max⁡=Fpull−12 N=48 N−12 N=36 Nf_{s,\max} = F_{\text{pull}} - 12\text{ N} = 48\text{ N} - 12\text{ N} = 36\text{ N}. Then μs=fs,max⁡N=36 N120 N=0.30\mu_s = \frac{f_{s,\max}}{N} = \frac{36\text{ N}}{120\text{ N}} = 0.30.

02

A 5.00 kg5.00\text{ kg} block is at rest on a horizontal surface where g=9.80 m/s2g = 9.80\text{ m/s}^2 and μk=0.200\mu_k = 0.200. A horizontal push causes the block to accelerate at 1.40 m/s21.40\text{ m/s}^2. If the applied pushing force is 4.20 N4.20\text{ N} greater than the threshold needed to initiate motion from rest, find the coefficient of static friction μs\mu_s.

Answer

μs=0.257\mu_s = 0.257. Key steps: Normal force N=(5.00)(9.80)=49.0 NN = (5.00)(9.80) = 49.0\text{ N}. Kinetic friction fk=0.200×49.0=9.80 Nf_k = 0.200 \times 49.0 = 9.80\text{ N}. Applied force Fapp=ma+fk=(5.00)(1.40)+9.80=16.80 NF_{\text{app}} = ma + f_k = (5.00)(1.40) + 9.80 = 16.80\text{ N}. Breakaway threshold fs,max⁡=Fapp−4.20=12.60 Nf_{s,\max} = F_{\text{app}} - 4.20 = 12.60\text{ N}. Then μs=12.6049.0≈0.257\mu_s = \frac{12.60}{49.0} \approx 0.257.

03

A motor pulls a 12.0 kg12.0\text{ kg} sled horizontally across packed snow (g=9.80 m/s2g = 9.80\text{ m/s}^2). The sled accelerates at 2.20 m/s22.20\text{ m/s}^2 while experiencing a kinetic friction force of 28.0 N28.0\text{ N}. The motor's applied force is 20%20\% greater than the maximum static friction force that had to be overcome at rest. Determine μs\mu_s.

Answer

μs≈0.386\mu_s \approx 0.386. Key steps: Normal force N=12.0×9.80=117.6 NN = 12.0 \times 9.80 = 117.6\text{ N}. Applied force Fapp=ma+fk=(12.0)(2.20)+28.0=54.4 NF_{\text{app}} = ma + f_k = (12.0)(2.20) + 28.0 = 54.4\text{ N}. Since Fapp=1.20fs,max⁡F_{\text{app}} = 1.20 f_{s,\max}, fs,max⁡=54.41.20≈45.33 Nf_{s,\max} = \frac{54.4}{1.20} \approx 45.33\text{ N}. Then μs=45.33117.6≈0.386\mu_s = \frac{45.33}{117.6} \approx 0.386.

Loading workspace…