Resources
A physics student analyzes a plot of velocity versus time for a particle constrained to one-dimensional motion along the -axis. The experimental velocity curve consists of straight line segments connecting the following coordinate pairs: , , , and . Although the particle has a negative initial velocity, the student mistakenly claims that the particle travels furthest from the origin at because speed and velocity reach their maximum positive value there. Given that the initial position at is , calculate the particle's displacement at , , and , and determine the exact timestamp at which the particle is furthest in magnitude from the starting point.
Answer and steps
Final answer
; ; ; furthest position magnitude occurs at ()
Steps
Fundamental Principle: Displacement from a Velocity–Time Graph
On a velocity-versus-time graph (), the displacement over any time interval equals the signed area between the velocity curve and the time axis:
- Regions above the time axis () contribute positive displacement (motion in the direction).
- Regions below the time axis () contribute negative displacement (motion in the direction).
Because the initial position is , the position at any time is simply equal to the net displacement from :
Step-by-Step Calculation of Displacements
The motion naturally divides into three triangular geometric segments:
Interval 1: to
The line connects to . This forms a triangle below the horizontal axis:
At , the particle is at .
Interval 2: to
The line connects to . This forms a triangle above the horizontal axis:
Adding this to the position at :
At , the particle is at .
Interval 3: to
The line connects to . This forms another triangle above the horizontal axis:
Adding this to the position at :
At , the particle is at .
Determining the Point Furthest from the Origin
- Common Pitfall: Conflating maximum velocity with maximum displacement. The velocity represents the slope of the position curve, not position itself. Even though reaches its maximum of at , the velocity remains positive for the entire interval from to .
- Motion Analysis:
- For , : the particle moves in the negative direction, reaching (magnitude ).
- For , : the particle continuously moves in the positive direction, increasing its position steadily from through (at ) up to (at ).
Comparing the magnitudes of position relative to the origin:
- At :
- At :
- At :
The particle is furthest from the origin at , located at .
Typical errors
01 The student treats displacement as total distance traveled by taking the absolute value of all areas under the velocity-time graph.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
From to , the velocity is negative (). Displacement is the signed area between the curve and the time axis, so regions below the axis must have a negative value.
- Step 2Correct
You correctly computed the area of the second triangle as , but because the previous position was carried over as instead of , your result was shifted.
- Step 3Correct
You calculated the third triangular segment correctly as , but the total accumulated displacement carries forward the initial sign error.
- Step 4
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used geometric area to determine changes in position from a velocity–time graph.
You accurately calculated the base and height for every triangular segment.
You correctly concluded that the particle is furthest from the origin at .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the region under the time axis as positive displacement rather than negative, calculating total distance traveled instead of net displacement.
REASONING PATH
Your ACEpath teacher’s suggested approach- Displacement is Signed Area
Displacement on a graph is given by . Regions where give positive displacement, while regions where give negative displacement.
Always assign a negative sign to areas located below the horizontal time axis when finding displacement or position.
- Displacement vs. Distance
Displacement accounts for direction (signed sum of areas), whereas total distance is the scalar path length (sum of absolute values of areas).
Check whether the question asks for position/displacement (signed) or total distance traveled (strictly positive).
CORRECTED PATH
ACEpath Teacher's DemonstrationAssign a negative sign to the triangle below the time axis: .
Add the signed area of the next triangle from to : .
Add the signed area of the final triangle from to : .
; ; ; furthest position magnitude occurs at ()
02 The student assumes that maximum distance from the origin occurs when velocity reaches its peak value rather than when the particle stops moving forward.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4
Furthest from starting point at because velocity is at its maximum of
CorrectFurthest at with
Maximum distance from the origin depends on position , not on instantaneous velocity . Because velocity remains positive from to , the particle keeps moving in the positive direction until , reaching its maximum distance of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the signed geometric area between the curve and the time axis to find displacements.
You accumulated displacement across consecutive time intervals accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeWHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the maximum value of velocity () with the maximum value of position (). While velocity reaches its peak at , the particle is still traveling forward () between and , meaning its distance from the origin continues to increase until it halts at .
REASONING PATH
Your ACEpath teacher’s suggested approach- Velocity Sign Determines Direction of Motion
As long as , position is increasing; position only turns around or reaches an extremum when .
Look for velocity zero-crossings () or interval endpoints to find extrema of position, not the peak of the curve.
- Compare Magnitudes of Calculated Positions
Distance from the origin at any time is given by .
Compare the absolute values of your computed positions: , , and .
CORRECTED PATH
ACEpath Teacher's DemonstrationCompare the position magnitudes at all critical times: , , and .
Note that for , , so the particle moves continuously forward until it momentarily stops at .
Identify the maximum position magnitude, which is at .
The particle is furthest from the starting point at with a displacement of .
03 The student calculates displacement by multiplying the instantaneous velocity at each timestamp by time instead of finding the area under the curve.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You multiplied the instantaneous velocity at () by time. Because velocity changes linearly from to , the displacement is the triangular area below the time axis: .
- Step 2Correct
You multiplied by the total time . To find the net displacement from , you must add the positive triangular area between and () to the previous displacement (), giving .
- Step 3Correct
You evaluated . A velocity of zero at means the particle has momentarily stopped, not that it returned to the origin. Adding the second positive triangular area from to () gives a total displacement of .
- Step 4Correct
with position
You concluded that the furthest distance occurred at based on your calculated displacements. Because the velocity remains positive between and , the particle keeps moving in the direction, reaching its maximum distance of at .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the instantaneous velocity values from the given coordinates at , , and .
You systematically evaluated each requested timestamp and stated a clear final answer.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo; this is a conceptual misunderstanding of how displacement relates to a velocity–time graph.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou applied the constant-velocity formula using the endpoint velocity , overlooking that for changing velocity, displacement equals the definite integral , which corresponds to the signed geometric area between the curve and the time axis.
REASONING PATH
Your ACEpath teacher’s suggested approach- Formula Validity Check
The formula is only valid when velocity is strictly constant. For varying velocity, .
Look at the graph: if the line is sloped or curved, use geometric area segments (triangles, rectangles, trapezoids) rather than .
- Area vs. Height
On a graph, vertical height represents velocity, while bounded area represents displacement.
Calculate the area of each shape formed between the graph and the -axis, assigning negative signs to regions below the axis and positive signs to regions above it.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the signed area of interval 1 ( to ): .
Calculate the signed area of interval 2 ( to ): , so .
Calculate the signed area of interval 3 ( to ): , so .
Compare position magnitudes: , , and .
; ; ; furthest position magnitude occurs at ()
Lock it in
On a velocity–time graph , what is the physical meaning of an area located below the time axis ()?
It represents a negative displacement (motion in the direction). In contrast, total distance treats this area as positive.
Similar question
A particle starts at . Its velocity–time graph consists of a line from to and another line from to . Find the particle's displacement at and at .
Answer
; . Key steps: For , area . For , area . Net displacement at is .
A particle starts at . From to , its velocity is constant at . From to , velocity increases linearly from to . Determine the position of the particle at and the total distance traveled from to .
Answer
Position ; total distance . Key steps: Negative area . Positive area . Position . Distance .
A runner moves along a straight track. The velocity is given by (in ) for . Assuming the runner starts at the origin , find the runner's maximum distance from the origin during the interval , and state the timestamp at which it occurs.
Answer
Furthest distance is at . Key steps: Velocity crosses zero at . For , area , so . For , area , so . Comparing magnitudes: and , so the runner is furthest at .