Resources

Earthquake seismometers record both primary (PP) and secondary (SS) body waves generated by tectonic slip events. (a) Classify PP-waves and SS-waves as transverse or longitudinal, specifying the physical deformation mode (shear strain vs. bulk volumetric compression) associated with each. (b) Explain the critical physical boundary condition that prevents SS-waves from propagating through the Earth's outer liquid core, whereas PP-waves propagate through both solids and fluids. (c) A solid crustal rock layer has a bulk modulus of B=4.80×1010 N/m2B = 4.80\times 10^{10}\text{ N/m}^2, a shear modulus of G=3.00×1010 N/m2G = 3.00\times 10^{10}\text{ N/m}^2, and a mass density of ρ=2700 kg/m3\rho = 2700\text{ kg/m}^3. Calculate the threshold speeds vP=B+43Gρv_P = \sqrt{\frac{B + \frac{4}{3}G}{\rho}} and vS=Gρv_S = \sqrt{\frac{G}{\rho}}, and determine the theoretical value of vSv_S as the medium transitions across the liquid boundary where G→0 N/m2G \to 0\text{ N/m}^2.

Answer and steps

Final answer

(a) PP-waves are longitudinal (bulk volumetric compression/rarefaction); SS-waves are transverse (shear strain deformation); (b) Transverse mechanical waves require a non-zero shear modulus (G>0G > 0) to provide a restoring force against lateral deformation, and ideal fluids/liquids cannot sustain static shear stress (G=0G = 0); (c) vP=5.71×103 m/sv_P = 5.71\times 10^3\text{ m/s}, vS=3.33×103 m/sv_S = 3.33\times 10^3\text{ m/s}, and across the liquid boundary where G→0 N/m2G \to 0\text{ N/m}^2, vS=0 m/sv_S = 0\text{ m/s}.

Steps

01

Speed of PP-waves (vPv_P)

Part (a): Wave Classification and Physical Deformation Modes

Mechanical waves are classified by the relationship between the direction of particle displacement and the direction of wave propagation:

  1. Primary (PP) waves are longitudinal waves.
    • Displacement: Particles oscillate parallel to the direction of wave propagation.
    • Deformation mode: The wave propagates via alternating regions of compression and expansion (rarefaction). This corresponds to bulk volumetric compression (changes in volume without permanent shape distortion).
  2. Secondary (SS) waves are transverse waves.
    • Displacement: Particles oscillate perpendicular to the direction of wave propagation.
    • Deformation mode: The wave propagates through lateral displacement of adjacent layers, which corresponds to shear strain (changes in shape at constant volume).

Part (b): Propagation Boundary Condition in Fluids

The propagation of any mechanical wave requires an elastic restoring force that acts to return disturbed particles to their equilibrium positions:

  • Shear modulus (GG) and transverse waves: Transverse waves (SS-waves) require a non-zero shear modulus (G>0G > 0) to generate a restoring shear stress against perpendicular displacements. Liquids and ideal fluids deform continuously under any applied shear stress and cannot sustain static shear forces; thus, for fluids, G=0 N/m2G = 0\text{ N/m}^2. Without a shear restoring force, transverse SS-waves cannot propagate through the Earth's liquid outer core.
  • Bulk modulus (BB) and longitudinal waves: Fluids resist changes in volume and exhibit a non-zero bulk modulus (B>0B > 0). Because longitudinal PP-waves rely on volumetric compression and expansion, they propagate through both solids and fluids.

Part (c): Wave Speed Calculations

The speed of longitudinal body waves in an isotropic solid is given by: vP=B+43Gρv_P = \sqrt{\frac{B + \frac{4}{3}G}{\rho}}

Substitute the given parameters:

  • B=4.80×1010 N/m2B = 4.80 \times 10^{10}\text{ N/m}^2
  • G=3.00×1010 N/m2G = 3.00 \times 10^{10}\text{ N/m}^2
  • ρ=2700 kg/m3\rho = 2700\text{ kg/m}^3

First, compute the effective elastic modulus: M=B+43G=4.80×1010 N/m2+43(3.00×1010 N/m2)M = B + \frac{4}{3}G = 4.80 \times 10^{10}\text{ N/m}^2 + \frac{4}{3}\left(3.00 \times 10^{10}\text{ N/m}^2\right) M=4.80×1010 N/m2+4.00×1010 N/m2=8.80×1010 N/m2M = 4.80 \times 10^{10}\text{ N/m}^2 + 4.00 \times 10^{10}\text{ N/m}^2 = 8.80 \times 10^{10}\text{ N/m}^2

Now, evaluate the wave speed: vP=8.80×1010 N/m22700 kg/m3=3.259×107 m2/s2≈5.71×103 m/sv_P = \sqrt{\frac{8.80 \times 10^{10}\text{ N/m}^2}{2700\text{ kg/m}^3}} = \sqrt{3.259 \times 10^7\text{ m}^2/\text{s}^2} \approx 5.71 \times 10^3\text{ m/s}

02

Speed of SS-waves (vSv_S)

The speed of transverse shear waves in an isotropic solid is: vS=Gρv_S = \sqrt{\frac{G}{\rho}}

Substitute GG and ρ\rho: vS=3.00×1010 N/m22700 kg/m3=1.111×107 m2/s2≈3.33×103 m/sv_S = \sqrt{\frac{3.00 \times 10^{10}\text{ N/m}^2}{2700\text{ kg/m}^3}} = \sqrt{1.111 \times 10^7\text{ m}^2/\text{s}^2} \approx 3.33 \times 10^3\text{ m/s}

03

Transition Across a Liquid Boundary

In a liquid medium, the shear modulus vanishes (G→0 N/m2G \to 0\text{ N/m}^2). Evaluating the limit for the shear wave velocity: vS=0ρ=0 m/sv_S = \sqrt{\frac{0}{\rho}} = 0\text{ m/s}

This zero velocity confirms that transverse shear waves are completely attenuated and cannot propagate into the fluid layer.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student reverses the wave classifications and physical deformation modes between P-waves and S-waves.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P-waves are transverse waves involving shear strain. ⟹ S-waves are longitudinal waves involving bulk volumetric compression.

    Correct

    PP-waves are longitudinal waves involving bulk volumetric compression/rarefaction; SS-waves are transverse waves involving shear strain deformation.

    You inverted the wave types and their corresponding physical deformations. Primary (PP) waves are longitudinal compressional waves, whereas secondary (SS) waves are transverse shear waves.

  2. Step 2

    Fluids have zero shear modulus, so waves requiring shear stress cannot propagate through liquids, whereas volume compression waves can travel through both solids and fluids.

  3. Step 3

    vP=4.80×1010+(4/3)(3.00×1010)2700=8.80×10102700≈5709 m/sv_P = \sqrt{\frac{4.80\times 10^{10} + (4/3)(3.00\times 10^{10})}{2700}} = \sqrt{\frac{8.80\times 10^{10}}{2700}} \approx 5709\text{ m/s} ⟹ vS=3.00×10102700≈3333 m/sv_S = \sqrt{\frac{3.00\times 10^{10}}{2700}} \approx 3333\text{ m/s} ⟹ As G→0 N/m2,vS=02700=0 m/s\text{As } G \to 0\text{ N/m}^2, v_S = \sqrt{\frac{0}{2700}} = 0\text{ m/s}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated that fluids have zero shear modulus and cannot support waves requiring shear stress.

You correctly computed both wave speeds using the elastic moduli and density.

You correctly evaluated the limit of the shear wave velocity as the shear modulus approaches zero.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wave Type Swapping

No slip observed; the inversion of PP-waves and SS-waves in part (a) reflects a conceptual mix-up of seismic wave terminology.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the letter designations and wave modes of seismic body waves: associating primary (PP) waves with transverse shear motion and secondary (SS) waves with longitudinal compression, rather than connecting PP to Pressure/Primary (longitudinal) and SS to Shear/Secondary (transverse).

REASONING PATH
Your ACEpath teacher’s suggested approach
Mnemonic for Seismic Wave Modes
  • PP-waves are Primary, Pressure/Push-pull (longitudinal volumetric compression); SS-waves are Secondary, Shear/Side-to-side (transverse shape deformation).

  • Whenever identifying seismic waves, associate the letter 'PP' with 'Pressure' (longitudinal compression) and the letter 'SS' with 'Shear' (transverse distortion).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that PP-waves (Primary waves) compress and dilate the medium parallel to the direction of propagation, meaning they are longitudinal waves operating via bulk volumetric compression.

  2. Recall that SS-waves (Secondary waves) displace material perpendicular to the direction of propagation, meaning they are transverse waves operating via shear strain.

Final answer

(a) PP-waves are longitudinal (bulk volumetric compression); SS-waves are transverse (shear strain). (b) Fluids have G=0G = 0, so transverse shear waves cannot propagate. (c) vP≈5.71×103 m/sv_P \approx 5.71\times 10^3\text{ m/s}, vS≈3.33×103 m/sv_S \approx 3.33\times 10^3\text{ m/s}, and vS=0 m/sv_S = 0\text{ m/s} across the liquid boundary.

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the mnemonic: PP = Primary / Pressure / Push-Pull (longitudinal); SS = Secondary / Shear / Side-to-side (transverse).

  • Review how particle displacement relates to wave propagation direction for transverse vs. longitudinal waves.

OverviewACEpath Teacher's Diagnosis

02 The student omits the factor of 4/3 multiplying the shear modulus in the formula for P-wave speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P-waves: longitudinal waves with bulk volumetric compression. ⟹ S-waves: transverse waves with shear strain.

  2. Step 2

    Fluids cannot sustain static shear stresses because their shear modulus is zero, which halts S-waves, while non-zero bulk modulus allows P-waves to transmit pressure fluctuations.

  3. Step 3

    vP=B+Gρ=4.80×1010+3.00×10102700=7.80×10102700≈5375 m/sv_P = \sqrt{\frac{B+G}{\rho}} = \sqrt{\frac{4.80\times 10^{10} + 3.00\times 10^{10}}{2700}} = \sqrt{\frac{7.80\times 10^{10}}{2700}} \approx 5375\text{ m/s}

    Correct

    vP=B+43Gρ=4.80×1010+43(3.00×1010)2700=8.80×10102700≈5.71×103 m/sv_P = \sqrt{\frac{B + \frac{4}{3}G}{\rho}} = \sqrt{\frac{4.80\times 10^{10} + \frac{4}{3}(3.00\times 10^{10})}{2700}} = \sqrt{\frac{8.80\times 10^{10}}{2700}} \approx 5.71\times 10^3\text{ m/s}

    You used B+GB + G instead of the longitudinal modulus M=B+43GM = B + \frac{4}{3}G. Omitting the coefficient 43\frac{4}{3} before the shear modulus resulted in an underestimate of vPv_P.

  4. Step 4

    vS=3.00×10102700≈3333 m/sv_S = \sqrt{\frac{3.00\times 10^{10}}{2700}} \approx 3333\text{ m/s} ⟹ As G→0G \to 0, vS=0 m/sv_S = 0\text{ m/s}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly matched PP-waves with longitudinal/volumetric compression and SS-waves with transverse/shear deformation.

You clearly explained the physical significance of a vanishing shear modulus (G=0G = 0) in fluids.

You accurately evaluated the shear wave velocity vSv_S and its limit as G→0G \to 0.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula transcription error

You accidentally omitted the fraction 43\frac{4}{3} multiplying the shear modulus GG in the longitudinal wave speed formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the 1D uniaxial modulus or a simple sum of moduli with the 3D isotropic P-wave modulus (constrained modulus M=K+43GM = K + \frac{4}{3}G), or miscopying the provided formula from the problem prompt.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the P-Wave Modulus
  • In an isotropic 3D elastic medium, uniaxial longitudinal strain produces both volumetric change and lateral shear, leading to the effective modulus M=B+43GM = B + \frac{4}{3}G.

  • Always verify that the shear contribution inside the PP-wave radical is multiplied by 43\frac{4}{3}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the effective longitudinal modulus: M=B+43G=4.80×1010 N/m2+43(3.00×1010 N/m2)=8.80×1010 N/m2M = B + \frac{4}{3}G = 4.80\times 10^{10}\text{ N/m}^2 + \frac{4}{3}(3.00\times 10^{10}\text{ N/m}^2) = 8.80\times 10^{10}\text{ N/m}^2.

  2. Divide by the mass density: Mρ=8.80×1010 N/m22700 kg/m3≈3.259×107 m2/s2\frac{M}{\rho} = \frac{8.80\times 10^{10}\text{ N/m}^2}{2700\text{ kg/m}^3} \approx 3.259\times 10^7\text{ m}^2/\text{s}^2.

  3. Take the square root: vP=3.259×107 m2/s2≈5.71×103 m/sv_P = \sqrt{3.259\times 10^7\text{ m}^2/\text{s}^2} \approx 5.71\times 10^3\text{ m/s}.

Final answer

vP≈5.71×103 m/sv_P \approx 5.71\times 10^3\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check formula transcriptions from the question prompt before substituting numerical values.

  • Remember that longitudinal body waves in an infinite medium are faster than in a thin rod because lateral expansion is constrained, introducing the 43G\frac{4}{3}G term.

  • Practice calculating PP-wave and SS-wave speeds given various elastic parameters.

OverviewACEpath Teacher's Diagnosis

03 The student attributes the inability of S-waves to propagate through fluids to high attenuation/damping from fluid viscosity rather than the absence of shear modulus.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P-waves are longitudinal waves with bulk volumetric compression. S-waves are transverse waves with shear strain.

  2. Step 2

    S-waves cannot propagate through the liquid outer core because viscous friction in liquid completely damps out transverse motion, whereas P-waves are not absorbed by viscosity.

    Correct

    Transverse mechanical waves require an elastic shear restoring force, characterized by a non-zero shear modulus (G>0G > 0). Fluids cannot support static shear stress (G=0 N/m2G = 0\text{ N/m}^2), so no restoring force exists to propagate transverse SS-waves.

    Viscosity causes dynamic friction during flow, but wave propagation depends on an elastic restoring force. Liquids cannot sustain static shear stress, meaning their shear modulus is zero (G=0 N/m2G = 0\text{ N/m}^2). Without an elastic restoring force against shear deformation, transverse waves cannot travel through fluids at all.

  3. Step 3

    vP=4.80×1010+(4/3)(3.00×1010)2700=8.80×10102700≈5709 m/s  ⟹  vS=3.00×10102700≈3333 m/s  ⟹  As G→0, vS=0 m/sv_P = \sqrt{\frac{4.80\times 10^{10} + (4/3)(3.00\times 10^{10})}{2700}} = \sqrt{\frac{8.80\times 10^{10}}{2700}} \approx 5709\text{ m/s} \implies v_S = \sqrt{\frac{3.00\times 10^{10}}{2700}} \approx 3333\text{ m/s} \implies \text{As } G \to 0,\, v_S = 0\text{ m/s}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified PP-waves as longitudinal and SS-waves as transverse.

You correctly identified bulk volumetric compression and shear strain as the corresponding deformation modes.

You accurately calculated both vPv_P and vSv_S using the given elastic moduli and density.

You correctly concluded that the theoretical transverse wave speed becomes zero when G→0 N/m2G \to 0\text{ N/m}^2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misidentifying Elastic Restoring Force as Viscous Damping

You explained the lack of SS-wave propagation through fluids as viscous damping rather than the absence of an elastic shear restoring force (G=0G = 0).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing dissipative fluid properties (dynamic viscosity η\eta, which attenuates ongoing motion) with fundamental elastic restoring mechanisms (shear modulus GG, which is required to establish a transverse wave equation). In continuum mechanics, mechanical wave propagation requires an elastic stiffness tensor component to return displaced particles to equilibrium. Because ideal fluids yield to shear deformation without generating an elastic restoring force (G=0G = 0), transverse waves cannot initiate or propagate in bulk fluids regardless of viscosity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Wave Propagation Requires an Elastic Restoring Force
  • For any mechanical wave, the wave speed satisfies v=Elastic ModulusInertiav = \sqrt{\frac{\text{Elastic Modulus}}{\text{Inertia}}}. Propagation requires a non-zero elastic modulus to pull displaced particles back to equilibrium.

  • Always verify whether the medium possesses the specific elastic modulus required for the given deformation mode (BB for longitudinal, GG for transverse).

Elastic Moduli of Fluids
  • Fluids resist changes in volume (B>0B > 0) but cannot sustain static shear stress (G=0 N/m2G = 0\text{ N/m}^2). Viscosity is a dissipative rate-dependent effect, not an elastic stiffness.

  • State that SS-waves cannot propagate through fluids because G=0 N/m2G = 0\text{ N/m}^2, which directly makes vS=G/ρ=0 m/sv_S = \sqrt{G/\rho} = 0\text{ m/s}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the type of restoring force required: Transverse SS-waves displace material perpendicular to the wave direction, inducing shear strain that requires a non-zero shear modulus (G>0G > 0) to supply an elastic restoring force.

  2. Analyze the elastic property of fluids: A liquid can resist volumetric changes (B>0B > 0), but by definition, it cannot sustain static shear stress and flows under shear. Therefore, for a liquid, G=0 N/m2G = 0\text{ N/m}^2.

  3. Connect the elastic modulus to wave propagation: Because vS=G/ρv_S = \sqrt{G/\rho}, having G=0 N/m2G = 0\text{ N/m}^2 means the medium provides no restoring force to propagate transverse displacements.

Final answer

SS-waves cannot propagate through the liquid outer core because liquids cannot sustain static shear stress, meaning their shear modulus is zero (G=0 N/m2G = 0\text{ N/m}^2). Without a shear restoring force, transverse mechanical waves cannot exist in the liquid.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between conservative elastic restoring forces (governed by moduli like BB and GG) and non-conservative dissipative forces (governed by viscosity η\eta).

  • Practice explaining wave cutoff boundaries using the vanishing of the associated elastic modulus in the wave speed formula.

Lock it in

Similar question

01

A sound wave travels through air at 343 m/s343\text{ m/s}. Classify this wave as transverse or longitudinal, and explain why sound can travel through gases while shear waves cannot.

Answer

Sound in air is a longitudinal wave. Gases have bulk elasticity (B>0B > 0) that resists compression, but zero shear modulus (G=0G = 0), so they cannot support transverse shear waves.

02

A geological layer has mass density ρ=2500 kg/m3\rho = 2500\text{ kg/m}^3, bulk modulus B=3.60×1010 N/m2B = 3.60\times 10^{10}\text{ N/m}^2, and shear modulus G=2.10×1010 N/m2G = 2.10\times 10^{10}\text{ N/m}^2. Calculate the ratio of the PP-wave speed to the SS-wave speed (vP/vSv_P / v_S) in this layer.

Answer

vP=B+43Gρ=3.60×1010+2.80×10102500=6.40×10102500=5060 m/sv_P = \sqrt{\frac{B + \frac{4}{3}G}{\rho}} = \sqrt{\frac{3.60\times 10^{10} + 2.80\times 10^{10}}{2500}} = \sqrt{\frac{6.40\times 10^{10}}{2500}} = 5060\text{ m/s}. vS=Gρ=2.10×10102500=2898 m/sv_S = \sqrt{\frac{G}{\rho}} = \sqrt{\frac{2.10\times 10^{10}}{2500}} = 2898\text{ m/s}. The ratio is vP/vS=BG+43=3.602.10+43≈1.714+1.333=3.048≈1.75v_P / v_S = \sqrt{\frac{B}{G} + \frac{4}{3}} = \sqrt{\frac{3.60}{2.10} + \frac{4}{3}} \approx \sqrt{1.714 + 1.333} = \sqrt{3.048} \approx 1.75.

03

In a liquid layer of water, density is ρ=1000 kg/m3\rho = 1000\text{ kg/m}^3 and bulk modulus is B=2.20×109 N/m2B = 2.20\times 10^9\text{ N/m}^2. If an underwater seismic event generates both compression and shear disturbances at the seabed, determine the speed of the disturbance that travels into the water and explain what happens to the shear disturbance.

Answer

The longitudinal (compressional) wave propagates at v=B/ρ=(2.20×109)/1000≈1483 m/sv = \sqrt{B/\rho} = \sqrt{(2.20\times 10^9)/1000} \approx 1483\text{ m/s}. The shear disturbance cannot propagate (vS=0 m/sv_S = 0\text{ m/s}) because water has G=0G = 0, causing the transverse energy to be reflected or converted at the liquid boundary.

Loading workspace…