Resources

A test mass m=2.00 kgm = 2.00\text{ kg} moves along the xx-axis from xi=1.00 mx_i = 1.00\text{ m} to xf=4.00 mx_f = 4.00\text{ m} under the influence of two concurrent forces: a non-contact conservative field force Ffield(x)=−Cx2i^F_{\text{field}}(x) = -\frac{C}{x^2}\hat{i} with constant C=18.0 N⋅m2C = 18.0\text{ N}\cdot\text{m}^2, and an applied external contact pushing force F⃗ext=+8.50i^ N\vec{F}_{\text{ext}} = +8.50\hat{i}\text{ N}. (a) Classify F⃗field\vec{F}_{\text{field}} and F⃗ext\vec{F}_{\text{ext}} as contact or non-contact forces. (b) Enforcing rigorous coordinate and vector sign conventions, compute the total work WfieldW_{\text{field}} performed by the non-contact field force and the total net work WnetW_{\text{net}} done on the mass during this displacement.

Answer and steps

Final answer

(a) FfieldF_{\text{field}}: non-contact force; FextF_{\text{ext}}: contact force; (b) Wfield=−13.5 JW_{\text{field}} = -13.5\text{ J}, Wnet=+12.0 JW_{\text{net}} = +12.0\text{ J}

Steps

01

Work Done by the Non-Contact Field Force (WfieldW_{\text{field}})

Part (a): Classifying the Forces

Forces in mechanics are fundamentally classified by how interacting bodies interact:

  • Contact forces arise from the direct physical touch or mechanical interaction between matter (such as pushes, pulls, normal forces, and friction). Here, F⃗ext\vec{F}_{\text{ext}} is an applied external pushing force, so it is a contact force.
  • Non-contact forces (action-at-a-distance or field forces) act through space without requiring physical contact (such as gravitational, electrostatic, and magnetic forces). Here, F⃗field\vec{F}_{\text{field}} is mediated by a field, so it is a non-contact force.

Part (b): Calculating Work Done

The work done along a straight path along the xx-axis by a force F⃗(x)=Fx(x)i^\vec{F}(x) = F_x(x)\hat{i} over a displacement from xix_i to xfx_f is defined by the line integral: W=∫xixfF⃗(x)⋅dr⃗=∫xixfFx(x) dxW = \int_{x_i}^{x_f} \vec{F}(x) \cdot d\vec{r} = \int_{x_i}^{x_f} F_x(x)\,dx

Given Fx,field=−Cx2F_{x,\text{field}} = -\frac{C}{x^2} with C=18.0 N⋅m2C = 18.0\text{ N}\cdot\text{m}^2, xi=1.00 mx_i = 1.00\text{ m}, and xf=4.00 mx_f = 4.00\text{ m}: Wfield=∫1.004.00(−Cx2)dxW_{\text{field}} = \int_{1.00}^{4.00} \left(-\frac{C}{x^2}\right) dx

Using the power rule ∫x−2 dx=−x−1=−1x\int x^{-2}\,dx = -x^{-1} = -\frac{1}{x}: Wfield=[Cx]1.004.00=C(14.00−11.00)W_{\text{field}} = \left[ \frac{C}{x} \right]_{1.00}^{4.00} = C \left(\frac{1}{4.00} - \frac{1}{1.00}\right)

Substitute the numerical value C=18.0 N⋅m2C = 18.0\text{ N}\cdot\text{m}^2: Wfield=18.0(0.25−1.00)=18.0⋅(−0.75)=−13.5 JW_{\text{field}} = 18.0 \left(0.25 - 1.00\right) = 18.0 \cdot (-0.75) = -13.5\text{ J}

(Pitfall note: Because the force points in the −i^-\hat{i} direction while the displacement points in the +i^+\hat{i} direction, the force opposes motion, resulting in negative work.)

02

Work Done by the External Contact Force (WextW_{\text{ext}})

Since F⃗ext=+8.50i^ N\vec{F}_{\text{ext}} = +8.50\hat{i}\text{ N} is constant: Wext=∫1.004.00Fx,ext dx=8.50⋅(4.00−1.00)=8.50⋅3.00=+25.5 JW_{\text{ext}} = \int_{1.00}^{4.00} F_{x,\text{ext}}\,dx = 8.50 \cdot (4.00 - 1.00) = 8.50 \cdot 3.00 = +25.5\text{ J}

03

Total Net Work (WnetW_{\text{net}})

By the principle of superposition of work, the total net work is the sum of the work done by all individual forces acting on the particle: Wnet=Wfield+Wext=−13.5 J+25.5 J=+12.0 JW_{\text{net}} = W_{\text{field}} + W_{\text{ext}} = -13.5\text{ J} + 25.5\text{ J} = +12.0\text{ J}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student omits the negative sign in the field force when integrating, resulting in a positive value for the work done by the opposing field force and an inflated net work.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    FfieldF_{\text{field}} is a non-contact force.   ⟹  Fext\implies F_{\text{ext}} is a contact force.

  2. Step 2

    Wfield=∫1.004.0018.0x2 dx=[−18.0x]1.004.00=(−18.04.00)−(−18.01.00)=−4.50+18.00=+13.5 JW_{\text{field}} = \int_{1.00}^{4.00} \frac{18.0}{x^2}\,dx = \left[-\frac{18.0}{x}\right]_{1.00}^{4.00} = \left(-\frac{18.0}{4.00}\right) - \left(-\frac{18.0}{1.00}\right) = -4.50 + 18.00 = +13.5\text{ J}

    Correct

    Wfield=∫1.004.00(−18.0x2)dx=[18.0x]1.004.00=18.0(14.00−1.00)=−13.5 JW_{\text{field}} = \int_{1.00}^{4.00} \left(-\frac{18.0}{x^2}\right) dx = \left[\frac{18.0}{x}\right]_{1.00}^{4.00} = 18.0\left(\frac{1}{4.00} - 1.00\right) = -13.5\text{ J}

    You omitted the negative sign from the field force component Fx(x)=−18.0x2F_x(x) = -\frac{18.0}{x^2}. Because the force points in the −i^-\hat{i} direction while the displacement is in the +i^+\hat{i} direction, the force opposes motion and does negative work.

  3. Step 3

    Wext=(8.50)(4.00−1.00)=25.5 JW_{\text{ext}} = (8.50)(4.00 - 1.00) = 25.5\text{ J}

  4. Step 4

    Wnet=Wfield+Wext=13.5+25.5=+39.0 JW_{\text{net}} = W_{\text{field}} + W_{\text{ext}} = 13.5 + 25.5 = +39.0\text{ J}

    Correct

    Wnet=Wfield+Wext=−13.5 J+25.5 J=+12.0 JW_{\text{net}} = W_{\text{field}} + W_{\text{ext}} = -13.5\text{ J} + 25.5\text{ J} = +12.0\text{ J}

    Your method of summing the individual works is correct, but your result was affected by the sign error in WfieldW_{\text{field}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified the two forces into contact and non-contact forces.

You applied the correct 1D work integral formula and executed the power rule of integration accurately.

You correctly calculated the work done by the constant applied force and used the principle of work superposition.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted vector component sign in work integral

You set up the integrand with a positive magnitude 18.0x2\frac{18.0}{x^2} instead of the vector component Fx=−18.0x2F_x = -\frac{18.0}{x^2}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing force magnitude with the scalar component along the coordinate axis when setting up line integrals.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check vector direction vs. coordinate axis
  • The 1D work integral requires the scalar component along the displacement axis: W=∫xixfFx(x) dxW = \int_{x_i}^{x_f} F_x(x)\,dx, where FxF_x carries an explicit positive or negative sign.

  • Always write F⃗⋅dr⃗=Fx dx\vec{F} \cdot d\vec{r} = F_x\,dx explicitly before substituting numbers so that negative signs from directional unit vectors are not lost.

Perform a physical sign check
  • If a force points opposite to the direction of displacement, the work done by that force must be negative.

  • Notice that displacement is from x=1x=1 to x=4x=4 (+i^+\hat{i} direction) while F⃗field\vec{F}_{\text{field}} points in the −i^-\hat{i} direction, meaning WfieldW_{\text{field}} must be negative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Wfield=∫1.004.00(−18.0x2)dx=[18.0x]1.004.00W_{\text{field}} = \int_{1.00}^{4.00} \left(-\frac{18.0}{x^2}\right) dx = \left[\frac{18.0}{x}\right]_{1.00}^{4.00}

  2. Wfield=18.0(14.00−11.00)=18.0(0.25−1.00)=−13.5 JW_{\text{field}} = 18.0\left(\frac{1}{4.00} - \frac{1}{1.00}\right) = 18.0(0.25 - 1.00) = -13.5\text{ J}

  3. Wnet=Wfield+Wext=−13.5 J+25.5 J=+12.0 JW_{\text{net}} = W_{\text{field}} + W_{\text{ext}} = -13.5\text{ J} + 25.5\text{ J} = +12.0\text{ J}

Final answer

(a) FfieldF_{\text{field}}: non-contact force; FextF_{\text{ext}}: contact force; (b) Wfield=−13.5 JW_{\text{field}} = -13.5\text{ J}, Wnet=+12.0 JW_{\text{net}} = +12.0\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Check whether each force points along or against the direction of motion before carrying out the integral.

  • Practice retaining negative signs on vector components when converting F⃗⋅dr⃗\vec{F} \cdot d\vec{r} to scalar integrals.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the antiderivative of 1/x² with the natural logarithm or incorrectly differentiates instead of integrating, using an improper antiderivative rule that leads to an incorrect field work.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ffield:non-contact force  ⟹  Fext:contact forceF_{\text{field}} : \text{non-contact force} \implies F_{\text{ext}} : \text{contact force}

  2. Step 2

    Wfield=∫1.004.00(−18.0x2)dx=[18.02x]1.004.00=(18.08.00)−(18.02.00)=2.25−9.00=−6.75 JW_{\text{field}} = \int_{1.00}^{4.00} \left(-\frac{18.0}{x^2}\right) dx = \left[\frac{18.0}{2x}\right]_{1.00}^{4.00} = \left(\frac{18.0}{8.00}\right) - \left(\frac{18.0}{2.00}\right) = 2.25 - 9.00 = -6.75\text{ J}

    Correct

    Wfield=∫1.004.00(−18.0x2)dx=[18.0x]1.004.00=18.0(14.00−11.00)=−13.5 JW_{\text{field}} = \int_{1.00}^{4.00} \left(-\frac{18.0}{x^2}\right) dx = \left[\frac{18.0}{x}\right]_{1.00}^{4.00} = 18.0\left(\frac{1}{4.00} - \frac{1}{1.00}\right) = -13.5\text{ J}

    You set up the line integral correctly, but integrated x−2x^{-2} incorrectly by including an extra factor of 22 in the denominator. The power rule gives ∫x−2 dx=x−1−1=−1x\int x^{-2}\,dx = \frac{x^{-1}}{-1} = -\frac{1}{x}, so ∫−18.0x−2 dx=18.0x\int -18.0 x^{-2}\,dx = \frac{18.0}{x}, not 18.02x\frac{18.0}{2x}.

  3. Step 3

    Wext=(8.50)(3.00)=25.5 JW_{\text{ext}} = (8.50)(3.00) = 25.5\text{ J}

  4. Step 4

    Wnet=−6.75+25.5=+18.75 JW_{\text{net}} = -6.75 + 25.5 = +18.75\text{ J}

    Correct

    Wnet=Wfield+Wext=−13.5 J+25.5 J=+12.0 JW_{\text{net}} = W_{\text{field}} + W_{\text{ext}} = -13.5\text{ J} + 25.5\text{ J} = +12.0\text{ J}

    Your superposition method Wnet=Wfield+WextW_{\text{net}} = W_{\text{field}} + W_{\text{ext}} is sound, but the numerical result is affected by the incorrect value of WfieldW_{\text{field}} from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly distinguished between contact and non-contact forces.

You properly set up the work integral for a position-dependent force.

You accurately calculated the work done by the constant contact force.

You correctly applied the work superposition principle to find the net work.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Improper power rule on negative exponents

You introduced an extra factor of 22 into the denominator when finding the antiderivative of x−2x^{-2}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You misapplied the integration power rule ∫xn dx=xn+1n+1\int x^n\,dx = \frac{x^{n+1}}{n+1} to n=−2n = -2, incorrectly dividing by the original exponent magnitude (22) rather than the new exponent (n+1=−1n+1 = -1).

REASONING PATH
Your ACEpath teacher’s suggested approach
Integration Power Rule for Negative Exponents
  • For any real n≠−1n \neq -1, ∫xn dx=xn+1n+1+C\int x^n\,dx = \frac{x^{n+1}}{n+1} + C. For n=−2n = -2, n+1=−1n+1 = -1, giving ∫x−2 dx=−x−1=−1x\int x^{-2}\,dx = -x^{-1} = -\frac{1}{x}.

  • Express 1x2\frac{1}{x^2} explicitly as x−2x^{-2} before integrating, add 11 to the exponent to get −1-1, and divide by −1-1.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. ∫1.004.00(−18.0x2)dx=[18.0x]1.004.00\int_{1.00}^{4.00} \left(-\frac{18.0}{x^2}\right) dx = \left[\frac{18.0}{x}\right]_{1.00}^{4.00}

  2. Wfield=18.0(14.00−11.00)=18.0(−0.75)=−13.5 JW_{\text{field}} = 18.0\left(\frac{1}{4.00} - \frac{1}{1.00}\right) = 18.0(-0.75) = -13.5\text{ J}

  3. Wnet=Wfield+Wext=−13.5 J+25.5 J=+12.0 JW_{\text{net}} = W_{\text{field}} + W_{\text{ext}} = -13.5\text{ J} + 25.5\text{ J} = +12.0\text{ J}

Final answer

(a) FfieldF_{\text{field}}: non-contact force; FextF_{\text{ext}}: contact force; (b) Wfield=−13.5 JW_{\text{field}} = -13.5\text{ J}, Wnet=+12.0 JW_{\text{net}} = +12.0\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the power rule for negative integer exponents to avoid carrying the old exponent into the denominator.

  • Always take the derivative of your candidate antiderivative as a quick check before evaluating limits.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the work done by the conservative field force with the change in potential energy, taking W_field = -ΔU = U_i - U_f incorrectly as ΔU = U_f - U_i, which reverses the sign of W_field to +13.5 J.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ffield is non-contact.  ⟹  Fext is contact.F_{\text{field}}\text{ is non-contact.} \implies F_{\text{ext}}\text{ is contact.}

  2. Step 2

    U(x)=−18.0xU(x) = -\frac{18.0}{x}

  3. Step 3

    Wfield=U(4.00)−U(1.00)=(−18.04.00)−(−18.01.00)=−4.50+18.00=+13.5 JW_{\text{field}} = U(4.00) - U(1.00) = \left(\frac{-18.0}{4.00}\right) - \left(\frac{-18.0}{1.00}\right) = -4.50 + 18.00 = +13.5\text{ J}

    Correct

    Wfield=−ΔU=−[U(4.00)−U(1.00)]=U(1.00)−U(4.00)=−13.5 JW_{\text{field}} = -\Delta U = -[U(4.00) - U(1.00)] = U(1.00) - U(4.00) = -13.5\text{ J}

    The work done by any conservative force is defined as the negative of the change in potential energy, Wcons=−ΔU=−(Uf−Ui)=Ui−UfW_{\text{cons}} = -\Delta U = -(U_f - U_i) = U_i - U_f. You calculated ΔU=Uf−Ui\Delta U = U_f - U_i without the minus sign, giving +13.5 J+13.5\text{ J} instead of −13.5 J-13.5\text{ J}.

  4. Step 4

    Wext=(8.50)(3.00)=25.5 JW_{\text{ext}} = (8.50)(3.00) = 25.5\text{ J}

  5. Step 5

    Wnet=13.5+25.5=+39.0 JW_{\text{net}} = 13.5 + 25.5 = +39.0\text{ J}

    Correct

    Wnet=Wfield+Wext=−13.5 J+25.5 J=+12.0 JW_{\text{net}} = W_{\text{field}} + W_{\text{ext}} = -13.5\text{ J} + 25.5\text{ J} = +12.0\text{ J}

    Your superposition method of summing individual works to find net work was completely sound, but your result was affected by the sign error in WfieldW_{\text{field}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified the field force as non-contact and the pushing force as contact.

You correctly determined the potential energy function U(x)=−18.0xU(x) = -\frac{18.0}{x} from the field force.

You calculated the work done by the constant external force accurately.

You correctly applied the work superposition principle by adding the individual work contributions to find the net work.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Conservative Work-Energy Relation

You set Wfield=ΔUW_{\text{field}} = \Delta U instead of Wfield=−ΔUW_{\text{field}} = -\Delta U.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the sign convention of work done by an internal conservative force with the work done by an external agent against the field. When a particle moves to a position of higher potential energy, the conservative field opposes the displacement, doing negative work (Wcons=−ΔU=Ui−UfW_{\text{cons}} = -\Delta U = U_i - U_f).

REASONING PATH
Your ACEpath teacher’s suggested approach
Fundamental Relation: Conservative Work vs. Potential Energy
  • For any conservative force, Wcons=−ΔU=−(Uf−Ui)=Ui−UfW_{\text{cons}} = -\Delta U = -(U_f - U_i) = U_i - U_f.

  • Always write out −ΔU-\Delta U with parentheses before substituting numerical values of UfU_f and UiU_i.

Physical Direction Sanity Check
  • If a force points opposite to the direction of motion, its work must be negative (W<0W < 0).

  • Check the sign of FxF_x: here Fx(x)=−18.0x2<0F_x(x) = -\frac{18.0}{x^2} < 0 along +x+x, while displacement is +3.00 m+3.00\text{ m}. Because force and displacement oppose each other, WfieldW_{\text{field}} must be negative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the definition of conservative work: Wfield=−ΔU=−[U(xf)−U(xi)]=U(xi)−U(xf)W_{\text{field}} = -\Delta U = -[U(x_f) - U(x_i)] = U(x_i) - U(x_f).

  2. Substitute xi=1.00 mx_i = 1.00\text{ m} and xf=4.00 mx_f = 4.00\text{ m}: Wfield=(−18.01.00)−(−18.04.00)=−18.00−(−4.50)=−13.5 JW_{\text{field}} = \left(-\frac{18.0}{1.00}\right) - \left(-\frac{18.0}{4.00}\right) = -18.00 - (-4.50) = -13.5\text{ J}.

  3. Sum the component works to obtain net work: Wnet=Wfield+Wext=−13.5 J+25.5 J=+12.0 JW_{\text{net}} = W_{\text{field}} + W_{\text{ext}} = -13.5\text{ J} + 25.5\text{ J} = +12.0\text{ J}.

Final answer

(a) FfieldF_{\text{field}} is a non-contact force; FextF_{\text{ext}} is a contact force; (b) Wfield=−13.5 JW_{\text{field}} = -13.5\text{ J}, Wnet=+12.0 JW_{\text{net}} = +12.0\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the fundamental identity Wfield=−ΔUW_{\text{field}} = -\Delta U, contrasting it with Wext, against field=+ΔUW_{\text{ext, against field}} = +\Delta U.

  • Perform a physical direction check: when force opposes motion (F⃗⋅dr⃗<0\vec{F} \cdot d\vec{r} < 0), work must be negative.

  • Practice computing work directly via integration ∫Fx dx\int F_x\,dx alongside −ΔU-\Delta U to verify consistent signs.

Lock it in

Similar question

01

A particle moves along the xx-axis from x=2.0 mx = 2.0\text{ m} to x=5.0 mx = 5.0\text{ m} subject to a retarding field force F⃗(x)=−20x2i^ N\vec{F}(x) = -\frac{20}{x^2}\hat{i}\text{ N}. Calculate the work done by this force.

Answer

W=−6.0 JW = -6.0\text{ J}. Key steps: W=∫25(−20x2)dx=[20x]25=20(15−12)=20(−0.30)=−6.0 JW = \int_{2}^{5} \left(-\frac{20}{x^2}\right) dx = \left[\frac{20}{x}\right]_{2}^{5} = 20\left(\frac{1}{5} - \frac{1}{2}\right) = 20(-0.30) = -6.0\text{ J}.

02

A block on a horizontal surface moves from x=1.0 mx = 1.0\text{ m} to x=3.0 mx = 3.0\text{ m}. It experiences a position-dependent resisting force F⃗1=−4.0xi^ N\vec{F}_1 = -4.0x\hat{i}\text{ N} and a constant pushing force F⃗2=+12.0i^ N\vec{F}_2 = +12.0\hat{i}\text{ N}. Compute the net work done on the block.

Answer

Wnet=+8.0 JW_{\text{net}} = +8.0\text{ J}. Key steps: W1=∫13(−4x) dx=[−2x2]13=−18−(−2)=−16.0 JW_1 = \int_{1}^{3} (-4x)\,dx = \left[-2x^2\right]_{1}^{3} = -18 - (-2) = -16.0\text{ J}. W2=12.0×(3−1)=+24.0 JW_2 = 12.0 \times (3 - 1) = +24.0\text{ J}. Wnet=−16.0+24.0=+8.0 JW_{\text{net}} = -16.0 + 24.0 = +8.0\text{ J}.

03

An object moves along the xx-axis from x=2.0 mx = 2.0\text{ m} to x=6.0 mx = 6.0\text{ m} under an attractive force directed toward the origin: F⃗(x)=−kx−1/2i^\vec{F}(x) = -k x^{-1/2}\hat{i} with k=6.0 N⋅m1/2k = 6.0\text{ N}\cdot\text{m}^{1/2}. Concurrently, a constant force F⃗pull=+10.0i^ N\vec{F}_{\text{pull}} = +10.0\hat{i}\text{ N} acts on it. Find the total work done by the field force and the net work done.

Answer

Wfield≈−12.4 JW_{\text{field}} \approx -12.4\text{ J} and Wnet≈+27.6 JW_{\text{net}} \approx +27.6\text{ J}. Key steps: Wfield=∫26(−6x−1/2) dx=[−12x]26=−12(6−2)≈−12(2.449−1.414)≈−12.42 JW_{\text{field}} = \int_{2}^{6} (-6x^{-1/2})\,dx = \left[-12\sqrt{x}\right]_{2}^{6} = -12(\sqrt{6} - \sqrt{2}) \approx -12(2.449 - 1.414) \approx -12.42\text{ J}. Wpull=10.0×(6−2)=+40.0 JW_{\text{pull}} = 10.0 \times (6 - 2) = +40.0\text{ J}. Wnet=−12.42+40.0≈+27.6 JW_{\text{net}} = -12.42 + 40.0 \approx +27.6\text{ J}.

Loading workspace…