Resources
Two tension cables pull on a stationary ground anchor ring located in the -plane. Cable exerts a force of magnitude directed along the positive -axis (). Cable exerts an adjustable force of variable magnitude directed at an angle of counterclockwise from the positive -axis. A third locking cable must exert a force exclusively along the negative -axis to prevent the ring from shifting in the -direction (). Determine the exact threshold magnitude of required to achieve zero net horizontal force, and compute the resulting vertical force magnitude that Cable must balance.
Answer and steps
Final answer
Threshold magnitude , and vertical force magnitude (acting in the direction, requiring along ).
Steps
Resolve the Forces into Cartesian Components
To analyze the forces acting on the ring, represent each vector in terms of horizontal () and vertical () components using the standard Cartesian coordinate system:
- Cable 1 (): Points entirely along the positive -axis ():
- Cable 2 (): Directed at an angle of counterclockwise from the positive -axis:
- Cable 3 (): Acts strictly along the negative -axis:
Determine the Magnitude for Horizontal Equilibrium
To ensure there is no horizontal acceleration or displacement, the net force in the -direction must equal zero ():
Substitute the known values into the equation:
Solve for :
Evaluating :
Common Pitfall: Note that is negative because Cable 2 pulls into the second quadrant (negative -direction). A negative divided by a negative correctly yields a positive force magnitude.
Calculate the Resulting Vertical Force and Cable 3 Magnitude
With established, calculate the upward vertical force exerted by Cable 2:
Substitute and :
Since Cable 1 has no vertical component (), the net upward force acting on the anchor ring is:
To keep the anchor ring completely stationary in the vertical direction (), Cable 3 pulls directly downward along the -axis with an equal magnitude:
Typical errors
01 The student confuses the sine and cosine trigonometric projections for the horizontal and vertical components.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
When an angle is measured counterclockwise from the positive -axis, the horizontal projection along the -axis is given by the cosine function, , not the sine function.
- Step 2Correct
The vertical component along the -axis requires the sine projection, , rather than cosine.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly established that the sum of horizontal forces must equal zero for equilibrium.
You correctly isolated the unknown variable algebraically from your equilibrium equation.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou accidentally swapped and when resolving the vector components from the standard reference angle.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou associated the horizontal direction with sine and the vertical direction with cosine, reversing the standard Cartesian projection definitions where and for angles measured from the positive -axis.
REASONING PATH
Your ACEpath teacher’s suggested approach- Standard Cartesian Vector Components
For any 2D vector of magnitude at an angle measured counterclockwise from the positive -axis, and .
Always draw a right triangle or remember: the side adjacent to the -axis uses cosine, while the side opposite (vertical) uses sine.
- Sign of Force Magnitudes
A vector magnitude is strictly a non-negative scalar ().
If your formula produces a negative value for magnitude, check whether an incorrect component sign or swapped trigonometric function flipped the direction.
CORRECTED PATH
ACEpath Teacher's DemonstrationResolve the forces horizontally: .
Solve for the magnitude: .
Calculate the vertical force exerted by Cable 2: .
Equate the downward force of Cable 3 to balance the upward vertical component: .
,
02 The student uses the supplementary angle of 35° without introducing a negative sign for the leftward horizontal component, yielding a negative magnitude.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because Cable 2 pulls leftward into the second quadrant, its horizontal component points along the negative -axis. When working with an acute reference angle like , you must explicitly assign a negative sign to that component (), or alternatively use the standard direction angle (). Writing caused you to solve for a negative magnitude, but vector magnitudes must always be non-negative.
- Step 3Correct
You recognized that the magnitude should be positive and correctly evaluated the vertical force balancing condition using , arriving at the correct final numerical value of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the supplementary reference angle with the negative horizontal axis.
You correctly set up the horizontal equilibrium condition .
You correctly used the sine function to determine the vertical component needed to balance Cable 3.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated the horizontal component as positive while using an acute reference angle, which forced the magnitude of to come out negative.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the standard counterclockwise polar angle with an acute geometric reference angle. A standard angle inherently carries the correct negative sign through . If you switch to an acute reference angle , is strictly positive, so you must manually assign the sign based on the quadrant direction.
REASONING PATH
Your ACEpath teacher’s suggested approach- Reference Angle vs. Standard Angle
For standard angles , components are always and . For acute reference angles , assign signs manually by quadrant: Quadrant II has components .](streamdown:incomplete-link)
Always verify that your force magnitude solves to a positive value. If , check whether you forgot a negative directional sign on a component.
CORRECTED PATH
ACEpath Teacher's DemonstrationState horizontal equilibrium with the explicit leftward component: .
Rearrange to solve for the magnitude: .
Calculate the vertical component: .
Conclude the balancing vertical force for Cable 3: .
Threshold magnitude , Cable 3 magnitude .
03 The student evaluates the trigonometric functions with the calculator in radian mode rather than degree mode.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You evaluated with your calculator set to radians instead of degrees. Since lies in Quadrant II, its cosine must be negative (), which yields a positive tension magnitude directly.
- Step 3Correct
Your vertical equilibrium formula is correct, but the result is inaccurate because it used the incorrect and evaluated in radians instead of degrees ().
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that the sum of horizontal forces must equal zero to prevent shifting in the -direction.
You correctly resolved the forces into components using cosine for the horizontal axis and sine for the vertical axis.
You recognized that Cable 3 must balance the total vertical force exerted by Cable 2.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou evaluated and as on your calculator.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou overlooked checking whether your calculator was in degree mode () when working with angles given in degrees (). In addition, calculating a positive cosine for an angle of indicates that the sign check for Quadrant II was missed.
REASONING PATH
Your ACEpath teacher’s suggested approach- Calculator Mode Verification
Whenever problem statements provide angles with degree symbols (), ensure your calculator displays DEG, not RAD.
Check your calculator display mode before performing any trigonometric evaluations.
- Quadrant Sign Sanity Check
For an angle in Quadrant II (), and .
Always verify that the sign of your evaluated trigonometric function matches the vector's quadrant direction.
CORRECTED PATH
ACEpath Teacher's DemonstrationEvaluate the cosine in degree mode: .
Solve for : .
Compute the vertical component using degree mode: .
Balance the vertical forces: .
Lock it in
When a vector has an angle measured counterclockwise from the -axis, which trigonometric functions represent and ?
and . Memory cue: cosine goes with (adjacent to reference axis), sine goes with (vertical).
Similar question
A force of magnitude acts at an angle of measured counterclockwise from the positive -axis. Determine its Cartesian components and .
Answer
; .
Two horizontal ropes pull on an eye-bolt. Rope A exerts a force of along the positive -axis. Rope B pulls at an angle of counterclockwise from the positive -axis. What magnitude of force must Rope B exert so that the net force in the -direction is zero?
Answer
Set : .
A ring is held in static equilibrium by three coplanar forces: , acting at counterclockwise from the -axis, and acting purely along the -axis. Find the required magnitudes of and .
Answer
Horizontal equilibrium: . Vertical equilibrium: .