Resources
In a physics laboratory experiment on one-dimensional collisions, two dynamic carts on a low-friction track are tracked by ultrasonic motion sensors connected to a digital data acquisition interface. Cart 1 has mass and cart 2 has mass . Sensor readings record cart 1 approaching cart 2 with an initial velocity while cart 2 is initially at rest (). After bumper contact, the sensor records and . (a) Calculate the total momentum before and after the collision to verify conservation of linear momentum. (b) Determine the coefficient of restitution of the laboratory bumper and classify the collision type.
Answer and steps
Final answer
(a) and (linear momentum is conserved within measurement precision); (b) ; the collision is inelastic (partially elastic) since
Steps
Part (a): Conservation of Linear Momentum
The total linear momentum of an isolated two-object system along a straight line is the sum of the individual momenta:
- Calculate initial momentum ():
- Calculate final momentum ():
Because to three significant figures, linear momentum is conserved within experimental uncertainty.
Part (b): Coefficient of Restitution and Collision Classification
The coefficient of restitution measures the ratio of the relative speed of separation to the relative speed of approach:
- Substitute the given velocities:
-
Classify the collision:
- For an ideal elastic collision, (mechanical kinetic energy is conserved).
- For a perfectly inelastic collision, (the carts stick together).
- Because , mechanical kinetic energy is partially dissipated into internal energy and sound while the carts separate. Therefore, the collision is classified as inelastic (specifically, partially elastic).
Pitfall to avoid: When calculating , ensure the numerator is the difference in velocities of separation () and the denominator is the difference in velocities of approach () so that remains a positive scalar.
Typical errors
01 The student inverts the relative velocity ratio when calculating the coefficient of restitution, yielding a value greater than 1 and mistakenly classifying the collision as superelastic.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You inverted the ratio for the coefficient of restitution. The coefficient is defined as the relative speed of separation over the relative speed of approach, , not approach over separation.
- Step 3Correct
Because your calculated was inverted ( instead of ), you classified the collision as superelastic. With the correct value of , the collision is inelastic (partially elastic).
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly substituted masses and velocities into the momentum conservation equations.
You accurately carried out the arithmetic for both the initial and final momenta to confirm conservation.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou accidentally placed the initial velocities in the numerator and final velocities in the denominator.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the order of states in the restitution formula: compares post-collision relative speed to pre-collision relative speed, meaning separation goes in the numerator and approach goes in the denominator.
REASONING PATH
Your ACEpath teacher’s suggested approach- Restitution Definition Check
The coefficient of restitution is , where separation (final) is in the numerator and approach (initial) is in the denominator.
Always verify that ordinary passive collisions without internal energy release yield .
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute into the correct formula: .
Compare to reference ranges: since , kinetic energy is partially dissipated and the carts separate, meaning the collision is inelastic (partially elastic).
(a) ; (b) , inelastic (partially elastic)
02 The student confuses an inelastic collision with a completely inelastic collision, concluding that the collision must be elastic because the carts bounce off each other rather than sticking together.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Momentum before and after is equal, so momentum is conserved.
- Step 2
- Step 3
Because the two carts bounce apart instead of sticking together, the collision is elastic.
CorrectBecause (specifically ), kinetic energy is partially lost, so the collision is classified as inelastic (or partially elastic).
You concluded that the collision is elastic because the carts bounce apart. However, an elastic collision requires (no kinetic energy lost). When objects bounce apart with , the collision is inelastic.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the total initial and final momentum to show momentum conservation.
You set up and evaluated the coefficient of restitution formula accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that any collision where objects bounce apart is elastic, conflating an inelastic collision () with a completely inelastic collision ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Collision Classification by Restitution Coefficient
A collision is elastic if , inelastic if , and completely (perfectly) inelastic if (objects stick together).
Always check the value of or compare total initial and final kinetic energy rather than just checking whether objects stick together.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecall the classification criteria based on the coefficient of restitution : is elastic, is inelastic, and is completely inelastic.
Since , the value lies strictly between 0 and 1.
Conclude that kinetic energy is not fully conserved, meaning the collision is inelastic.
(a) (conserved); (b) , inelastic (partially elastic)
03 The student swaps the mass values of the two carts during momentum evaluation, leading to an incorrect final momentum and the erroneous conclusion that momentum is not conserved.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You swapped the masses of the two carts, substituting and instead of and .
- Step 2Correct
You continued with the swapped mass values, pairing with and with .
- Step 3
, so momentum is not conserved.
Correct, so total linear momentum is conserved.
Because your calculated initial and final momentum values were affected by the mass swap, your comparison and conclusion that momentum is not conserved were also affected.
- Step 4
- Step 5
The collision is inelastic because .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly applied the definition of total linear momentum as the sum of individual cart momenta.
You calculated the coefficient of restitution accurately using the correct velocity differences.
You properly classified the collision type based on the value of .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou inverted the values for and , setting and throughout part (a).
WHY IT HAPPENED
ACEpath Teacher's DiagnosisA transcription and bookkeeping slip occurred when assigning the given numerical parameters to their respective variables ( vs. ). Because the mass values were reversed, the larger cart's momentum was weighted by the smaller mass and vice versa, creating an artificial mismatch between initial and final momentum.
REASONING PATH
Your ACEpath teacher’s suggested approach- Variable Matching Check
Every object's given parameters (mass, initial velocity, final velocity) must share the same subscript index: object uses and object uses .
Write down an explicit data inventory listing , , etc., before writing algebraic substitution steps.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite down the total initial momentum formula with explicit indices: .
Substitute the correct mass values: .
Calculate the total final momentum with the same indices: .
Compare initial and final momentum: since , momentum is conserved within experimental precision.
(a) and (momentum is conserved); (b) , inelastic
Lock it in
What is the defining formula for the coefficient of restitution in a 1D collision between objects 1 and 2?
. Memory cue: Final relative speed (separation) always sits on top of initial relative speed (approach).
Similar question
Cart A () moving at strikes stationary Cart B (). After collision, Cart A rebounds at and Cart B moves forward at . Find the coefficient of restitution and classify the collision.
Answer
. The collision is perfectly elastic.
A ball moving at overtakes a ball moving at in the same direction. If the coefficient of restitution between them is , what is their relative speed of separation after collision?
Answer
Approach speed: . Separation speed: .
Glider 1 () travels at toward stationary Glider 2 (). The bumper has . Using momentum conservation and the definition of , calculate the final velocities and .
Answer
From : . From momentum: and .