Resources

In an analytical chemistry laboratory, a student operates a UV-Vis double-beam spectrophotometer to determine the concentration of potassium permanganate (KMnO4\text{KMnO}_4) in an aqueous sample. The monochromator utilizes a diffraction grating with N=1200 lines/mmN = 1200\text{ lines/mm}. A collimated beam strikes the grating at normal incidence, and the first-order (m=1m = 1) diffraction peak for the maximum absorbance of the permanganate ion is measured by the detector at an angle of θ=38.68∘\theta = 38.68^\circ. Using the diffraction grating equation dsin⁡θ=mλd \sin\theta = m\lambda: (a) calculate the slit spacing dd in meters, (b) calculate the analytical wavelength λ\lambda in nanometers, and (c) identify the spectral category and the complementary observed color of the transmission solution.

Answer and steps

Final answer

(a) d=8.333×10−7 md = 8.333 \times 10^{-7}\text{ m}; (b) λ=525 nm\lambda = 525\text{ nm}; (c) Visible spectrum (green absorbed strongly; transmitted solution appears magenta/purple)

Steps

Part (a): Slit Spacing dd of the Grating

A diffraction grating with a groove density of N=1200 lines/mmN = 1200\text{ lines/mm} has a slit spacing (grating constant) dd equal to the reciprocal of NN:

d=1Nd = \frac{1}{N}

First, convert NN to the SI unit of lines/m\text{lines/m}:

N=1200 lines/mm×103 mm/m=1.200×106 lines/mN = 1200\text{ lines/mm} \times 10^3\text{ mm/m} = 1.200 \times 10^6\text{ lines/m}

Now, compute dd:

d=11.200×106 lines/m≈8.333×10−7 md = \frac{1}{1.200 \times 10^6\text{ lines/m}} \approx 8.333 \times 10^{-7}\text{ m}


Part (b): Analytical Wavelength λ\lambda

The condition for constructive interference at normal incidence is given by the diffraction grating equation:

dsin⁡θ=mλd \sin\theta = m\lambda

Rearranging for the wavelength λ\lambda in the first diffraction order (m=1m = 1):

λ=dsin⁡θm\lambda = \frac{d \sin\theta}{m}

Substitute the values d=8.333×10−7 md = 8.333 \times 10^{-7}\text{ m}, θ=38.68∘\theta = 38.68^\circ, and m=1m = 1:

sin⁡(38.68∘)≈0.630\sin(38.68^\circ) \approx 0.630

λ=(8.333×10−7 m)(0.630)1≈5.25×10−7 m=525 nm\lambda = \frac{(8.333 \times 10^{-7}\text{ m})(0.630)}{1} \approx 5.25 \times 10^{-7}\text{ m} = 525\text{ nm}


Part (c): Spectral Category and Transmitted Color

  1. Spectral Category: A wavelength of λ=525 nm\lambda = 525\text{ nm} lies in the visible region of the electromagnetic spectrum (specifically corresponding to green light, roughly 500–560 nm500\text{--}560\text{ nm}).
  2. Complementary Observed Color:

    • In spectrophotometry, when a chemical species strongly absorbs a particular wavelength, the light transmitted through the cuvette is depleted in that color.
    • The permanganate ion (MnOX4X−\ce{MnO4-} in KMnOX4\ce{KMnO4}) strongly absorbs green light around 525 nm525\text{ nm}.
    • According to the complementary color wheel, the complementary color to green is magenta/purple. Hence, the transmitted solution is observed as magenta/purple.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the grating density from lines per millimeter to lines per meter, resulting in a slit spacing that is off by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    d=1N=11200=8.333×10−4 md = \frac{1}{N} = \frac{1}{1200} = 8.333 \times 10^{-4}\text{ m}

    Correct

    d=11200 lines/mm=8.333×10−4 mm=8.333×10−7 md = \frac{1}{1200\text{ lines/mm}} = 8.333 \times 10^{-4}\text{ mm} = 8.333 \times 10^{-7}\text{ m}

    You inverted N=1200 lines/mmN = 1200\text{ lines/mm} correctly, but the resulting unit is millimeters (mm\text{mm}), not meters (m\text{m}). Converting millimeters to meters requires multiplying by 10−3 m/mm10^{-3}\text{ m/mm}, giving d≈8.333×10−7 md \approx 8.333 \times 10^{-7}\text{ m}.

  2. Step 2

    λ=dsin⁡θm⟹λ=8.333×10−4 m×sin⁡38.68∘1⟹λ=5.208×10−4 m=5.208×105 nm\lambda = \frac{d \sin\theta}{m} \Longrightarrow \lambda = \frac{8.333 \times 10^{-4}\text{ m} \times \sin 38.68^\circ}{1} \Longrightarrow \lambda = 5.208 \times 10^{-4}\text{ m} = 5.208 \times 10^5\text{ nm}

    Correct

    λ=dsin⁡θm=(8.333×10−7 m)(sin⁡38.68∘)1≈5.25×10−7 m=525 nm\lambda = \frac{d \sin\theta}{m} = \frac{(8.333 \times 10^{-7}\text{ m})(\sin 38.68^\circ)}{1} \approx 5.25 \times 10^{-7}\text{ m} = 525\text{ nm}

    You rearranged the grating equation and carried out the trigonometric calculation accurately. Your answer is off by a factor of 10310^3 strictly due to the propagated value of dd from Step 1.

  3. Step 3

    Infrared region, Purple solution

    Correct

    Visible spectrum (green light absorbed, λ≈525 nm\lambda \approx 525\text{ nm}); transmitted solution appears magenta/purple.

    You correctly recognized that the transmitted permanganate solution appears purple. Your classification of the wavelength as infrared followed consistently from your calculated value of 5.208×105 nm5.208 \times 10^5\text{ nm}, but the true analytical wavelength of 525 nm525\text{ nm} falls squarely in the visible green region.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the reciprocal relationship d=1Nd = \frac{1}{N} to find the grating spacing.

You correctly rearranged and applied the diffraction grating formula dsin⁡θ=mλd \sin\theta = m\lambda.

You accurately identified that the transmitted potassium permanganate solution is purple.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Grating Density Unit Conversion

You treated a value given in lines/mm\text{lines/mm} as if it were in SI units (lines/m\text{lines/m}) without multiplying by 103 mm/m10^3\text{ mm/m}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the compound denominator unit when converting density into spacing: when density is given in grooves/mm\text{grooves/mm}, its direct reciprocal is in mm/groove\text{mm/groove}, requiring an additional factor of 10−310^{-3} to reach SI meters.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Tracking on Density Reciprocals
  • d=1Nd = \frac{1}{N}. If NN is in lines/mm\text{lines/mm}, then dd is initially in millimeters.

  • Always convert line density to SI units first (N [m−1]=N [mm−1]×103N\,[\text{m}^{-1}] = N\,[\text{mm}^{-1}] \times 10^3) or attach millimeters explicitly to dd before converting to meters.

Optical Order-of-Magnitude Sanity Check
  • Visible light wavelengths strictly span 380–750 nm380\text{--}750\text{ nm} (10−7 m10^{-7}\text{ m}).

  • If a UV-Vis spectrometer calculation yields λ≈105 nm\lambda \approx 10^5\text{ nm} or 10−4 m10^{-4}\text{ m}, check your slit spacing dd for an unapplied milli-to-meter (10−310^{-3}) factor.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the grating density in SI units: N=1200 mm−1×103 mm/m=1.200×106 m−1N = 1200\text{ mm}^{-1} \times 10^3\text{ mm/m} = 1.200 \times 10^6\text{ m}^{-1}.

  2. Calculate slit spacing: d=11.200×106 m−1≈8.333×10−7 md = \frac{1}{1.200 \times 10^6\text{ m}^{-1}} \approx 8.333 \times 10^{-7}\text{ m}.

  3. Calculate wavelength: λ=dsin⁡(38.68∘)1=(8.333×10−7 m)(0.6250)≈5.208×10−7 m=521 nm\lambda = \frac{d \sin(38.68^\circ)}{1} = (8.333 \times 10^{-7}\text{ m})(0.6250) \approx 5.208 \times 10^{-7}\text{ m} = 521\text{ nm} (or 525 nm525\text{ nm} with sin⁡(38.68∘)≈0.630\sin(38.68^\circ) \approx 0.630).

  4. Identify the region: λ≈525 nm\lambda \approx 525\text{ nm} lies in the visible spectrum (green light absorbed, purple transmitted).

Final answer

(a) d=8.333×10−7 md = 8.333 \times 10^{-7}\text{ m}; (b) λ=525 nm\lambda = 525\text{ nm}; (c) Visible spectrum; transmitted solution appears magenta/purple.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting non-SI grating densities (such as grooves/mm\text{grooves/mm} or lines/cm\text{lines/cm}) directly into SI meters before inserting them into formulas.

  • Memorize the approximate boundaries of the optical spectrum (100–400 nm100\text{--}400\text{ nm} UV, 400–700 nm400\text{--}700\text{ nm} visible, >700 nm>700\text{ nm} IR) to catch power-of-ten unit mistakes immediately.

OverviewACEpath Teacher's Diagnosis

02 The student evaluates the angle in radians instead of degrees when calculating sin(38.68°), yielding a negative and physically meaningless wavelength.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    N=1200 lines/mm=1.2×106 lines/m  ⟹  d=11.2×106=8.333×10−7 mN = 1200\text{ lines/mm} = 1.2 \times 10^6\text{ lines/m} \implies d = \frac{1}{1.2 \times 10^6} = 8.333 \times 10^{-7}\text{ m}

  2. Step 2

    λ=dsin⁡(38.68)1  ⟹  sin⁡(38.68 rad)=0.587  ⟹  λ=8.333×10−7×0.587=4.89×10−7 m=489 nm\lambda = \frac{d\sin(38.68)}{1} \implies \sin(38.68\text{ rad}) = 0.587 \implies \lambda = 8.333 \times 10^{-7} \times 0.587 = 4.89 \times 10^{-7}\text{ m} = 489\text{ nm}

    Correct

    λ=dsin⁡(38.68∘)1≈(8.333×10−7 m)(0.630)≈5.25×10−7 m=525 nm\lambda = \frac{d\sin(38.68^\circ)}{1} \approx (8.333 \times 10^{-7}\text{ m})(0.630) \approx 5.25 \times 10^{-7}\text{ m} = 525\text{ nm}

    You correctly rearranged the grating formula for λ\lambda, but you evaluated the sine function using radians instead of degree mode. Evaluating sin⁡(38.68∘)\sin(38.68^\circ) gives approximately 0.6300.630, yielding λ=525 nm\lambda = 525\text{ nm}.

  3. Step 3

    Visible light  ⟹  Orange solution\text{Visible light} \implies \text{Orange solution}

    Correct

    Visible spectrum (green absorbed strongly at 525 nm; transmitted solution appears magenta/purple)\text{Visible spectrum (green absorbed strongly at } 525\text{ nm; transmitted solution appears magenta/purple)}

    You correctly identified that the wavelength falls in the visible spectrum. Your conclusion of an orange solution followed logically from your calculated wavelength of 489 nm489\text{ nm} (blue-green absorbs, transmitting complementary orange), but with the correct wavelength of 525 nm525\text{ nm} (green absorbed), the complementary transmitted color is magenta/purple.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the grating line density into SI units of lines/m\text{lines/m}.

You accurately determined the grating slit spacing dd using the reciprocal relationship d=1Nd = \frac{1}{N}.

You properly isolated λ\lambda from the first-order diffraction grating formula dsin⁡θ=mλd\sin\theta = m\lambda with m=1m = 1.

You correctly classified the wavelength region as visible light and understood the concept of complementary colors in absorption spectroscopy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Angular Unit Mismatch (Degree vs. Radian Mode)

You labeled and evaluated the diffraction angle as 38.68 rad38.68\text{ rad} instead of 38.68∘38.68^\circ.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In physics and analytical chemistry instruments, diffraction angles from spectrometers are measured in degrees. Forgetting to ensure your calculator is set to degree mode (or misinterpreting degree values as radians) alters the trigonometric factor sin⁡θ\sin\theta, which directly shifts the calculated wavelength and downstream spectral interpretation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Calculator Angle Mode Check
  • Whenever an angle is given with the degree symbol (∘^\circ), ensure your calculator is set to DEG mode before evaluating trigonometric functions.

  • Check the status bar of your calculator for 'DEG' before calculating sin⁡(38.68∘)≈0.630\sin(38.68^\circ) \approx 0.630.

Spectroscopy Complementary Color Pairing
  • The observed color of a solution is complementary to the color of light it absorbs: red ↔\leftrightarrow cyan, green ↔\leftrightarrow magenta, blue ↔\leftrightarrow yellow.

  • Locate the absorbed wavelength (525 nm525\text{ nm} = green) on the color wheel and identify the opposite color (magenta/purple) as the transmitted color.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate the diffraction angle in degrees: sin⁡(38.68∘)≈0.630\sin(38.68^\circ) \approx 0.630.

  2. Substitute into the diffraction equation: λ=(8.333×10−7 m)(0.630)1≈5.25×10−7 m=525 nm\lambda = \frac{(8.333 \times 10^{-7}\text{ m})(0.630)}{1} \approx 5.25 \times 10^{-7}\text{ m} = 525\text{ nm}.

  3. Identify the absorbed color: 525 nm525\text{ nm} lies in the visible spectrum and corresponds to green light.

  4. Determine the transmitted color: the complementary color to green on the color wheel is magenta/purple.

Final answer

(a) d=8.333×10−7 md = 8.333 \times 10^{-7}\text{ m}; (b) λ=525 nm\lambda = 525\text{ nm}; (c) Visible spectrum (green absorbed strongly; transmitted solution appears magenta/purple)

NEXT STEPS
Final Takeaways from Your Teacher
  • Always verify that your calculator displays 'DEG' when working with spectrometer or diffraction angles specified in degrees.

  • Practice matching visible wavelengths (e.g., 400–700 nm400\text{--}700\text{ nm}) to their absorbed color bands and their complementary transmitted colors using a standard color wheel.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the absorbed color with the transmitted color and reports the absorbed green color instead of the observed complementary purple color.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    d=11200×103=8.333×10−7 md = \frac{1}{1200 \times 10^3} = 8.333 \times 10^{-7}\text{ m}

  2. Step 2

    λ=dsin⁡θ=8.333×10−7×sin⁡(38.68∘)  ⟹  λ=8.333×10−7×0.625=5.208×10−7 m=521 nm\lambda = d \sin\theta = 8.333 \times 10^{-7} \times \sin(38.68^\circ) \implies \lambda = 8.333 \times 10^{-7} \times 0.625 = 5.208 \times 10^{-7}\text{ m} = 521\text{ nm}

  3. Step 3

    Visible spectrum Green solution

    Correct

    Visible spectrum; magenta/purple transmitted solution

    While you correctly identified the visible region, λ≈521–525 nm\lambda \approx 521\text{--}525\text{ nm} corresponds to green light that is absorbed by the permanganate ion, meaning the transmitted light appears as the complementary color, magenta or purple.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the slit spacing from the grating density using proper unit conversion.

You correctly applied the diffraction grating formula to find the peak absorbance wavelength.

You correctly identified that the wavelength falls within the visible region of the electromagnetic spectrum.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Absorbed vs. Transmitted Color Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the color of light maximally absorbed by the analyte (extgreen ext{green} at ≈520–525 nm\approx 520\text{--}525\text{ nm}) with the observed color of the transmitted light. A solution appears as the complementary color of the light it absorbs, not the absorbed color itself.

REASONING PATH
Your ACEpath teacher’s suggested approach
Complementary Color Principle
  • An absorbing species removes its peak wavelength from white light; the transmitted light transmitted to the eye is the complementary color across the color wheel.

  • When given an absorption wavelength, first identify the absorbed color, then use a complementary color wheel to determine the transmitted color observed by the eye.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that λ≈521–525 nm\lambda \approx 521\text{--}525\text{ nm} is in the visible spectrum and corresponds to green light.

  2. Because the permanganate ion exhibits maximum absorbance at this wavelength, green light is strongly absorbed from incident white light.

  3. Locate green on the complementary color wheel: the color opposite green is magenta/purple.

  4. Conclude that the transmitted light reaching the observer's eye appears magenta/purple.

Final answer

(a) d=8.333×10−7 md = 8.333 \times 10^{-7}\text{ m}; (b) λ≈521–525 nm\lambda \approx 521\text{--}525\text{ nm}; (c) Visible spectrum; transmitted solution appears magenta/purple.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relationship between absorbed wavelengths and perceived complementary colors using a standard visible color wheel.

  • Practice identifying the perceived color of common coordination complexes and dyes from their UV-Vis absorption spectra.

Lock it in

Similar question

01

A diffraction grating has 500 lines/mm500\text{ lines/mm}. A monochromatic laser strikes the grating at normal incidence and produces a second-order (m=2m = 2) principal maximum at θ=38.68∘\theta = 38.68^\circ. Calculate (a) the slit spacing dd in meters and (b) the wavelength λ\lambda in nanometers.

Answer

(a) d=10−3 m500=2.00×10−6 md = \frac{10^{-3}\text{ m}}{500} = 2.00 \times 10^{-6}\text{ m}. (b) λ=dsin⁡θm=(2.00×10−6 m)(sin⁡38.68∘)2=(2.00×10−6)(0.6250)2=6.25×10−7 m=625 nm\lambda = \frac{d \sin\theta}{m} = \frac{(2.00 \times 10^{-6}\text{ m})(\sin 38.68^\circ)}{2} = \frac{(2.00 \times 10^{-6})(0.6250)}{2} = 6.25 \times 10^{-7}\text{ m} = 625\text{ nm}.

02

A spectrophotometer uses a grating with groove density N=1800 lines/mmN = 1800\text{ lines/mm}. The primary absorption peak for a food-dye sample occurs at a first-order diffraction angle of θ=45.0∘\theta = 45.0^\circ. Determine the absorption wavelength λ\lambda and classify its region in the electromagnetic spectrum.

Answer

d=10−3 m1800≈5.556×10−7 md = \frac{10^{-3}\text{ m}}{1800} \approx 5.556 \times 10^{-7}\text{ m}. Then λ=dsin⁡(45.0∘)=(5.556×10−7 m)(0.7071)≈3.93×10−7 m=393 nm\lambda = d \sin(45.0^\circ) = (5.556 \times 10^{-7}\text{ m})(0.7071) \approx 3.93 \times 10^{-7}\text{ m} = 393\text{ nm}. This falls at the violet edge of the visible spectrum (near ultraviolet).

03

An unknown dye absorbs strongly at λ=650 nm\lambda = 650\text{ nm} (red). A transmission spectrophotometer measures the first-order diffraction of this peak using a grating with d=1.25×10−6 md = 1.25 \times 10^{-6}\text{ m}. (a) Find the diffraction angle θ\theta. (b) What color does the transmitted dye solution appear to an observer?

Answer

(a) sin⁡θ=mλd=1×650×10−9 m1.25×10−6 m=0.520  ⟹  θ=arcsin⁡(0.520)≈31.33∘\sin\theta = \frac{m\lambda}{d} = \frac{1 \times 650 \times 10^{-9}\text{ m}}{1.25 \times 10^{-6}\text{ m}} = 0.520 \implies \theta = \arcsin(0.520) \approx 31.33^\circ. (b) Since red light is absorbed, the transmitted solution exhibits the complementary color, which is cyan/blue-green.

Loading workspace…