Resources

An air-track glider attached to an ideal horizontal spring undergoes simple harmonic motion along the xx-axis. The position of the glider as a function of time is modeled by x(t)=(0.240 m)cos⁡(8.00πt−π3)x(t) = (0.240\text{ m})\cos(8.00\pi t - \frac{\pi}{3}), where tt is measured in seconds and angles are in radians. Determine: (a) the amplitude AA of the oscillation, (b) the oscillation frequency ff in hertz, (c) the period TT, and (d) the phase constant ϕ0\phi_0 as written in standard phase form cos⁡(ωt+ϕ0)\cos(\omega t + \phi_0).

Answer and steps

Final answer

(a) A=0.240 mA = 0.240\text{ m}; (b) f=4.00 Hzf = 4.00\text{ Hz}; (c) T=0.250 sT = 0.250\text{ s}; (d) ϕ0=−π3 rad\phi_0 = -\frac{\pi}{3}\text{ rad} (or −1.05 rad-1.05\text{ rad})

Steps

Finding the Amplitude AA

Standard Form of Simple Harmonic Motion

The position of an object undergoing simple harmonic motion (SHM) as a function of time tt is described by the standard cosine model: x(t)=Acos⁡(ωt+ϕ0)x(t) = A\cos(\omega t + \phi_0) where:

  • AA is the amplitude (maximum displacement from equilibrium),
  • ω\omega is the angular frequency (in rad/s\text{rad/s}),
  • ϕ0\phi_0 is the initial phase constant (in radians),
  • (ωt+ϕ0)(\omega t + \phi_0) is the phase at time tt. Comparing the given equation, x(t)=(0.240 m)cos⁡(8.00πt−π3)x(t) = (0.240\text{ m})\cos\left(8.00\pi t - \frac{\pi}{3}\right) with the standard equation allows us to match each parameter directly.

Step-by-Step Derivation

By direct inspection of the coefficient in front of the cosine function:

A=0.240 mA = 0.240\text{ m}


Finding the Frequency ff

From the coefficient of time tt, the angular frequency is:

ω=8.00π rad/s\omega = 8.00\pi\text{ rad/s}

The relationship between angular frequency ω\omega and ordinary frequency ff (measured in hertz, Hz\text{Hz}) is:

ω=2πf  ⟹  f=ω2π\omega = 2\pi f \implies f = \frac{\omega}{2\pi}

Substitute ω=8.00π rad/s\omega = 8.00\pi\text{ rad/s}:

f=8.00π rad/s2π rad=4.00 Hzf = \frac{8.00\pi\text{ rad/s}}{2\pi\text{ rad}} = 4.00\text{ Hz}


Finding the Period TT

The period TT is the time required to complete one full cycle of oscillation, which is the reciprocal of the frequency:

T=1f=14.00 Hz=0.250 sT = \frac{1}{f} = \frac{1}{4.00\text{ Hz}} = 0.250\text{ s}

(Alternatively, T=2πω=2π8.00π=0.250 sT = \frac{2\pi}{\omega} = \frac{2\pi}{8.00\pi} = 0.250\text{ s}.)


Finding the Phase Constant ϕ0\phi_0

Writing the argument of the cosine in the standard additive form ωt+ϕ0\omega t + \phi_0:

8.00πt−π3=8.00πt+(−π3)8.00\pi t - \frac{\pi}{3} = 8.00\pi t + \left(-\frac{\pi}{3}\right)

Therefore, the phase constant is:

ϕ0=−π3 rad≈−1.05 rad\phi_0 = -\frac{\pi}{3}\text{ rad} \approx -1.05\text{ rad}

Common Pitfall: Be careful with signs. In the standard form Acos⁡(ωt+ϕ0)A\cos(\omega t + \phi_0), a minus sign inside the cosine means ϕ0\phi_0 is negative (ϕ0=−π3 rad\phi_0 = -\frac{\pi}{3}\text{ rad}), representing a positive time shift (a delay) relative to an unshifted cosine wave.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses angular frequency with linear frequency, directly setting f equal to the coefficient of t.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    A=0.240 mA = 0.240\text{ m}

  2. Step 2

    f=8.00π Hz=25.1 Hzf = 8.00\pi\text{ Hz} = 25.1\text{ Hz}

    Correct

    ω=8.00π rad/s  ⟹  f=ω2π=8.00π rad/s2π rad=4.00 Hz\omega = 8.00\pi\text{ rad/s} \implies f = \frac{\omega}{2\pi} = \frac{8.00\pi\text{ rad/s}}{2\pi\text{ rad}} = 4.00\text{ Hz}

    The coefficient multiplying tt inside the cosine argument represents the angular frequency ω\omega in radians per second, not the linear frequency ff in hertz. To find ff, you need to divide ω\omega by 2π2\pi.

  3. Step 3

    T=1f=1(8.00π Hz)=0.0398 sT = \frac{1}{f} = \frac{1}{(8.00\pi\text{ Hz})} = 0.0398\text{ s}

    Correct

    T=1f=14.00 Hz=0.250 sT = \frac{1}{f} = \frac{1}{4.00\text{ Hz}} = 0.250\text{ s}

    Your relationship T=1fT = \frac{1}{f} is correct, but the numerical result was affected by substituting the incorrect frequency from the previous step.

  4. Step 4

    ϕ0=−π3 rad\phi_0 = -\frac{\pi}{3}\text{ rad}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the amplitude A=0.240 mA = 0.240\text{ m} directly from the leading coefficient.

You correctly preserved the negative sign for the phase constant ϕ0=−π3 rad\phi_0 = -\frac{\pi}{3}\text{ rad}.

You knew the reciprocal relationship between period and frequency, T=1fT = \frac{1}{f}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing Angular Frequency with Frequency

You equated the coefficient of tt directly to linear frequency ff instead of angular frequency ω\omega.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the factor of 2π2\pi that relates angular rate (in rad/s\text{rad/s}) to complete cycle rate (in Hz\text{Hz} or cycles/s\text{cycles/s}). In standard simple harmonic motion x(t)=Acos⁡(ωt+ϕ0)x(t) = A\cos(\omega t + \phi_0), the multiplier of time is always ω=2πf\omega = 2\pi f.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Standard Form
  • x(t)=Acos⁡(ωt+ϕ0)x(t) = A\cos(\omega t + \phi_0), where the time coefficient is ω\omega, not ff.

  • Always identify ω\omega first from the argument of the trigonometric function.

Convert $\omega$ to $f$
  • ω=2πf  ⟺  f=ω2π\omega = 2\pi f \iff f = \frac{\omega}{2\pi}.

  • Divide the angular frequency by 2π2\pi whenever frequency in hertz is requested.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the angular frequency from the coefficient of tt: ω=8.00π rad/s\omega = 8.00\pi\text{ rad/s}.

  2. Calculate linear frequency: f=ω2π=8.00π2π=4.00 Hzf = \frac{\omega}{2\pi} = \frac{8.00\pi}{2\pi} = 4.00\text{ Hz}.

  3. Recalculate the period: T=1f=14.00 Hz=0.250 sT = \frac{1}{f} = \frac{1}{4.00\text{ Hz}} = 0.250\text{ s}.

Final answer

(a) A=0.240 mA = 0.240\text{ m}; (b) f=4.00 Hzf = 4.00\text{ Hz}; (c) T=0.250 sT = 0.250\text{ s}; (d) ϕ0=−π3 rad\phi_0 = -\frac{\pi}{3}\text{ rad}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down the standard equation x(t)=Acos⁡(ωt+ϕ0)x(t) = A\cos(\omega t + \phi_0) directly above the given equation before reading off parameters.

  • Check units systematically: angular frequency ω\omega has units of rad/s\text{rad/s}, while frequency ff has units of Hz\text{Hz} (cycles per second).

OverviewACEpath Teacher's Diagnosis

02 The student ignores the negative sign in the phase argument when matching to the form cos(ωt + ϕ₀), concluding the phase constant is positive π/3.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    A=0.240 mA = 0.240\text{ m}

  2. Step 2

    ω=8.00π rad/s  ⟹  f=ω2π=8.00π2π=4.00 Hz\omega = 8.00\pi\text{ rad/s} \implies f = \frac{\omega}{2\pi} = \frac{8.00\pi}{2\pi} = 4.00\text{ Hz}

  3. Step 3

    T=1f=14.00=0.250 sT = \frac{1}{f} = \frac{1}{4.00} = 0.250\text{ s}

  4. Step 4

    ϕ0=π3 rad\phi_0 = \frac{\pi}{3}\text{ rad}

    Correct

    ϕ0=−π3 rad\phi_0 = -\frac{\pi}{3}\text{ rad}

    You dropped the negative sign in the cosine argument. Standard form defines the argument as ωt+ϕ0\omega t + \phi_0, so 8.00πt−π3=8.00πt+(−π3)8.00\pi t - \frac{\pi}{3} = 8.00\pi t + \left(-\frac{\pi}{3}\right), which gives ϕ0=−π3 rad\phi_0 = -\frac{\pi}{3}\text{ rad}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the amplitude directly from the wave function.

You correctly related angular frequency ω\omega to linear frequency ff using f=ω2πf = \frac{\omega}{2\pi}.

You correctly found the period TT from the frequency ff.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Phase Constant

You dropped the minus sign when reading the constant term inside the cosine argument.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You matched the magnitude of the constant term inside the cosine function without accounting for the additive definition ωt+ϕ0\omega t + \phi_0 in the standard harmonic oscillator model.

REASONING PATH
Your ACEpath teacher’s suggested approach
Standard SHM Cosine Form
  • In standard form x(t)=Acos⁡(ωt+ϕ0)x(t) = A\cos(\omega t + \phi_0), the phase constant ϕ0\phi_0 is added to ωt\omega t.

  • Rewrite any minus sign inside the argument as an addition of a negative number: ωt−c=ωt+(−c)\omega t - c = \omega t + (-c), so ϕ0=−c\phi_0 = -c.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Rewrite the argument of the cosine function in standard addition form: 8.00πt−π3=8.00πt+(−π3)8.00\pi t - \frac{\pi}{3} = 8.00\pi t + \left(-\frac{\pi}{3}\right).

  2. Compare directly with ωt+ϕ0\omega t + \phi_0 to identify ϕ0=−π3 rad\phi_0 = -\frac{\pi}{3}\text{ rad} (or ≈−1.05 rad\approx -1.05\text{ rad}).

Final answer

(a) A=0.240 mA = 0.240\text{ m}; (b) f=4.00 Hzf = 4.00\text{ Hz}; (c) T=0.250 sT = 0.250\text{ s}; (d) ϕ0=−π3 rad\phi_0 = -\frac{\pi}{3}\text{ rad}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the argument comparison explicitly as ωt+ϕ0=[given argument]\omega t + \phi_0 = [\text{given argument}] before solving for ϕ0\phi_0.

  • Remember that a negative phase constant ϕ0<0\phi_0 < 0 corresponds to a positive time delay (shifting the peak to the right).

OverviewACEpath Teacher's Diagnosis

03 The student inverts the relationship between period and frequency, multiplying frequency by 2π or setting T = f instead of T = 1/f.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    A=0.240 mA = 0.240\text{ m}

  2. Step 2

    ω=8.00π rad/s  ⟹  f=8.00π2π=4.00 Hz\omega = 8.00\pi\text{ rad/s} \implies f = \frac{8.00\pi}{2\pi} = 4.00\text{ Hz}

  3. Step 3

    T=1f  ⟹  T=14.00=4.00 sT = \frac{1}{f} \implies T = \frac{1}{4.00} = 4.00\text{ s}

    Correct

    T=1f=14.00 Hz=0.250 sT = \frac{1}{f} = \frac{1}{4.00\text{ Hz}} = 0.250\text{ s}

    You stated the correct formula T=1fT = \frac{1}{f} and set up 14.00\frac{1}{4.00}, but you evaluated 14\frac{1}{4} as 4.00 s4.00\text{ s} instead of dividing 11 by 44 to get 0.250 s0.250\text{ s}.

  4. Step 4

    ϕ0=−π3 rad\phi_0 = -\frac{\pi}{3}\text{ rad}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the amplitude AA directly from the given cosine function.

You used the relationship f=ω2πf = \frac{\omega}{2\pi} correctly to find the frequency.

You chose the correct reciprocal formula T=1fT = \frac{1}{f} for the period.

You matched the phase constant ϕ0\phi_0 with its correct negative sign.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reciprocal arithmetic evaluation error

You set up the correct expression T=14.00T = \frac{1}{4.00} but wrote down the denominator value 4.004.00 as the result instead of calculating 1÷4=0.2501 \div 4 = 0.250.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

A quick calculation slip occurred when evaluating a fraction with 11 in the numerator, accidentally equating 1x\frac{1}{x} with xx rather than dividing.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reciprocal Calculation Check
  • For any non-zero frequency ff, the period is T=1fT = \frac{1}{f}, which is strictly less than 11 whenever f>1f > 1.

  • Whenever f>1 Hzf > 1\text{ Hz}, check that your period TT is a decimal fraction less than 1 s1\text{ s}, because 14=0.25\frac{1}{4} = 0.25.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute f=4.00 Hzf = 4.00\text{ Hz} into the period formula: T=14.00 HzT = \frac{1}{4.00\text{ Hz}}.

  2. Compute the decimal value: T=0.250 sT = 0.250\text{ s}.

Final answer

(a) A=0.240 mA = 0.240\text{ m}; (b) f=4.00 Hzf = 4.00\text{ Hz}; (c) T=0.250 sT = 0.250\text{ s}; (d) ϕ0=−π3 rad\phi_0 = -\frac{\pi}{3}\text{ rad}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that you compute 1x\frac{1}{x} by dividing 11 by xx, not by copying xx.

  • Perform a quick mental unit-and-magnitude check: if an object completes 44 cycles in 1 second1\text{ second}, each cycle must take only a quarter of a second (0.25 s0.25\text{ s}).

Lock it in

Similar question

01

An oscillating mass has displacement x(t)=(0.50 m)cos⁡(6.00πt+π4)x(t) = (0.50\text{ m})\cos(6.00\pi t + \frac{\pi}{4}). Determine: (a) the angular frequency ω\omega, (b) the frequency ff in Hz\text{Hz}, and (c) the period TT in seconds.

Answer

(a) ω=6.00π rad/s\omega = 6.00\pi\text{ rad/s} by direct inspection of the coefficient of tt. (b) f=ω2π=6.00π2π=3.00 Hzf = \frac{\omega}{2\pi} = \frac{6.00\pi}{2\pi} = 3.00\text{ Hz}. (c) T=1f=13.00 Hz≈0.333 sT = \frac{1}{f} = \frac{1}{3.00\text{ Hz}} \approx 0.333\text{ s}.

02

A particle on a spring moves according to x(t)=(0.12 m)cos⁡(50.0t−1.20)x(t) = (0.12\text{ m})\cos(50.0 t - 1.20), where tt is in seconds. Calculate the frequency ff in hertz and the period TT in seconds.

Answer
  1. Identify ω=50.0 rad/s\omega = 50.0\text{ rad/s} from the coefficient of tt.
  2. Compute frequency: f=ω2π=50.02π≈7.96 Hzf = \frac{\omega}{2\pi} = \frac{50.0}{2\pi} \approx 7.96\text{ Hz}.
  3. Compute period: T=1f=2π50.0≈0.126 sT = \frac{1}{f} = \frac{2\pi}{50.0} \approx 0.126\text{ s}.
03

A harmonic oscillator completes 120120 full cycles in 30.0 s30.0\text{ s} with an amplitude of 0.050 m0.050\text{ m} and zero initial phase constant at t=0t = 0. Write down its position function x(t)=Acos⁡(ωt+ϕ0)x(t) = A\cos(\omega t + \phi_0) and state the value of ω\omega.

Answer
  1. Frequency f=120 cycles30.0 s=4.00 Hzf = \frac{120\text{ cycles}}{30.0\text{ s}} = 4.00\text{ Hz}.
  2. Angular frequency ω=2πf=2π(4.00)=8.00π rad/s≈25.1 rad/s\omega = 2\pi f = 2\pi(4.00) = 8.00\pi\text{ rad/s} \approx 25.1\text{ rad/s}.
  3. With A=0.050 mA = 0.050\text{ m} and ϕ0=0\phi_0 = 0, the function is x(t)=(0.050 m)cos⁡(8.00πt)x(t) = (0.050\text{ m})\cos(8.00\pi t).
Loading workspace…