Resources
A block of mass is held in static equilibrium on an inclined plane by a horizontal pushing force of magnitude directed horizontally into the incline (parallel to the base, not parallel to the ramp surface). The ramp surface is frictionless. From the free-body diagram resolved along axes perpendicular and parallel to the incline, determine the exact incline angle (measured above the horizontal) required for the block to remain stationary, and compute the magnitude of the normal force acting on the block. Use .
Answer and steps
Final answer
,
Steps
Identify the Forces and Coordinate Axes
A block of mass rests in static equilibrium on a frictionless incline of angle . Three distinct forces act on the block:
- Gravity (): Directed vertically downward with magnitude:
- Normal force (): Directed perpendicular to and pointing away from the inclined surface.
- Horizontal applied force (): Directed horizontally toward the incline with magnitude .
Choose a rotated coordinate system aligned with the ramp:
- Parallel axis (-axis): Directed along the incline (choosing up the incline as positive).
- Perpendicular axis (-axis): Directed normal to the incline surface (pointing outward as positive).
Resolve Forces into Components Along the Incline
Decompose the forces not aligned with the ramp into their parallel and perpendicular components:
-
Gravity ():
- Perpendicular component: (directed into the incline, negative )
- Parallel component: (directed down the incline, negative )
-
Horizontal Push (): Because the push is horizontal and the ramp makes an angle with the horizontal:
- Parallel component: (directed up the incline, positive )
- Perpendicular component: (directed into the incline, negative )
Common Pitfall: A frequent mistake is assuming the push acts purely parallel to the ramp. Because is purely horizontal, it presses the block both up the slope () and into the slope (), directly increasing the normal force.
Apply Equilibrium Parallel to the Incline to Find
Since the block is in static equilibrium, the net force along the ramp must equal zero:
Rearranging gives:
Divide both sides by and :
Substitute the numerical values:
Taking the inverse tangent:
Apply Equilibrium Perpendicular to the Incline to Find
The block does not accelerate off or into the surface, so the net force in the perpendicular direction is zero:
Solving for :
Substitute :
Typical errors
01 The student confuses the trigonometric components of the horizontal force along the axes of the incline, using sin θ for the parallel component and cos θ for the perpendicular component.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because the pushing force is horizontal and the ramp is tilted at angle relative to the horizontal, the angle between the push vector and the incline surface is . The component parallel to the surface is the adjacent component, , not .
- Step 2Correct
The component of the horizontal force directed into the inclined plane is the opposite side of the vector triangle, which is . Using here repeats the component swap.
WHAT YOU DID WELL
Compliments from Your TeacherYou recognized that static equilibrium requires balancing forces both parallel to the incline and perpendicular to the incline.
You correctly resolved the gravitational force into along the incline and perpendicular to the incline.
You correctly recognized that the resulting equality was physically impossible, demonstrating good critical checking.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the horizontal force using the same trigonometric projection rules as vertical gravity, using along the incline and perpendicular to it, rather than inspecting the geometric angle between the horizontal vector and the incline.
REASONING PATH
Your ACEpath teacher’s suggested approach- Resolve Forces Relative to Incline Geometry
For an angle measured above the horizontal, a horizontal vector makes an angle with the ramp surface, giving parallel component and perpendicular component .
Always draw a small right triangle for each force showing the angle before writing down sine or cosine.
CORRECTED PATH
ACEpath Teacher's DemonstrationEquate parallel forces: .
Divide by and : .
Solve for the angle: .
Equate perpendicular forces: .
Substitute : .
,
02 The student ignores the perpendicular component of the horizontal pushing force, assuming the normal force balances only the perpendicular component of gravity.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because the push force is directed horizontally rather than parallel to the incline, it pushes the block directly into the surface as well as up the slope. Its perpendicular component, , acts into the incline alongside and must be balanced by .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved the horizontal push and gravity along the axis parallel to the incline.
You correctly set up the equilibrium equation along the ramp to determine the exact angle .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set as if gravity were the only force pressing the block into the ramp surface.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the normal force as balancing only the perpendicular component of gravity, overlooking that any applied force not parallel to the surface has a perpendicular component that alters the normal force.
REASONING PATH
Your ACEpath teacher’s suggested approach- Decompose all non-aligned forces
Every force that is not parallel or perpendicular to the chosen axes must be broken into both components.
Draw a dedicated free-body diagram showing directed horizontally, then decompose it into along the ramp and into the ramp.
- Sum all perpendicular forces
Along the perpendicular axis, equals the sum of all forces pressing the object into the surface when .
Write out completely before solving for .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet the sum of perpendicular forces to zero: .
Solve for the normal force: .
Substitute the known values and : .
Calculate: .
,
03 The student subtracts rather than adds the perpendicular component of the pushing force when solving for the normal force.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
The horizontal push points into the incline, so its perpendicular component acts into the surface in the same direction as the perpendicular component of gravity. Therefore, both components must be balanced by the normal force: .
- Step 3Correct
Your arithmetic and trigonometric evaluations were executed correctly, but the final value was affected by the sign error in the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the gravitational weight .
You accurately resolved the forces parallel to the incline to find .
You found the correct equilibrium angle .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou subtracted the perpendicular component of the pushing force rather than adding it to the normal force equation.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisMisinterpreting the direction of the vector components when resolving a horizontal force relative to an inclined plane. A horizontal force directed toward an incline presses the object into the surface, requiring the normal force to support both gravity and the push.
REASONING PATH
Your ACEpath teacher’s suggested approach- Vector Component Direction
Sketch the perpendicular axis (normal to the ramp) and trace each force vector's projection onto this axis.
Check whether each component pushes into the ramp or pulls away from it before writing down the sum of forces.
- Equilibrium Condition
Along the perpendicular axis pointing outward: .
Ensure that all forces pressing into the surface have negative signs if is defined as positive outward.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the perpendicular equilibrium condition: .
Solve for the normal force: .
Substitute : .
Compute the value: .
,
Lock it in
When a force is purely horizontal on a ramp inclined at angle to the horizontal, what are its components parallel and perpendicular to the ramp?
(along the ramp) and (into the ramp). The horizontal vector is adjacent to the ramp's incline angle .
Similar question
A crate rests on a frictionless incline tilted at above the horizontal. A horizontal force pushes against the crate to keep it stationary. Find the required magnitude of . Use .
Answer
. Along the ramp, equilibrium requires .
A block is held on a frictionless incline by a horizontal pushing force . Calculate the normal force exerted by the incline on the block. Use .
Answer
. Perpendicular to the ramp, .
A block of mass is maintained in equilibrium on a frictionless incline of angle by a horizontal force . If the normal force is measured to be exactly twice the weight of the block (), determine the incline angle .
Answer
. From parallel equilibrium, . From perpendicular equilibrium, . Setting gives .