Resources
A steel block is released from rest at the top of a curved track of vertical height . It slides down the track and across a horizontal rough segment of length with dynamic friction coefficient before striking and compressing a horizontal spring of force constant . Treating the steel block as the primary thermodynamic system, write the formal First Law energy balance equation strictly adhering to sign conventions: , explicitly categorizing the work of the non-conservative contact force, the change in gravitational potential energy, and the change in elastic potential energy. Calculate the maximum compression of the spring upon coming momentarily to rest, taking .
Answer and steps
Final answer
First Law balance: , where , , and ; (or ).
Steps
Thermodynamic and Work-Energy Formulation
When including gravity and spring interactions via their respective potential energy functions, the mechanical energy balance derived from the First Law (, where ) takes the form:
Here:
- is the change in translational kinetic energy.
- is the change in gravitational potential energy.
- is the change in elastic potential energy of the spring.
- is the work done by the non-conservative dynamic friction force acting over the horizontal segment.
Evaluating the Energy Terms
- Change in Kinetic Energy (): The block is released from rest () and comes momentarily to rest at maximum spring compression ():
- Change in Gravitational Potential Energy (): Setting the horizontal surface as the reference level ():
- Work Done by Friction (): Along the horizontal distance , the normal force is . Dynamic friction opposes displacement, so the work done is negative:
- Change in Elastic Potential Energy (): Initially, the spring is uncompressed (). At maximum compression :
Solving for Maximum Spring Compression ()
Substitute all evaluated quantities into the energy balance equation:
Isolate the elastic potential energy:
Key Pitfall to Avoid
- Sign of Friction Work: Dynamic friction always opposes the direction of sliding motion, meaning . Using a positive value leads to an unphysical result where friction generates mechanical energy instead of dissipating it as thermal energy.
Typical errors
01 The student adds the work done by friction instead of subtracting it, treating friction as if it adds energy to the system.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Dynamic friction opposes the direction of motion, so the work done by friction is negative: . In your formulation, you added the friction term as if friction provided additional mechanical energy to compress the spring rather than removing energy from the system.
- Step 2Correct
Because of the initial sign error on friction work, your expression equates the final elastic energy to the sum of the initial gravitational energy and the friction work instead of the difference.
- Step 3Correct
Your arithmetic evaluation was carried out correctly following your algebraic formula, but it propagates the sign error from Step 1.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the relevant energy mechanisms: gravitational potential energy, spring elastic potential energy, and kinetic friction.
You correctly used the dynamic normal force to formulate the friction magnitude as .
You performed the algebraic rearrangements and square root arithmetic accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated friction as an energy source rather than an energy sink in your balance equation.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing how dissipated energy appears in work-energy balance equations versus conservation of total energy statements. When applying , the work done by kinetic friction is inherently negative (), which means mechanical energy is removed, so .
REASONING PATH
Your ACEpath teacher’s suggested approach- Check the sign of non-conservative work
. For kinetic friction opposing displacement, , so .
Always verify whether an external force adds mechanical energy to the system () or removes energy () before isolating variables.
- Physical reality check on final energy
In the presence of friction and with no driving source, final mechanical energy cannot exceed initial mechanical energy: .
Check whether your isolated final energy term is smaller than the initial mechanical energy: .
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute the numerical values: .
Evaluate the mechanical energy available to compress the spring: .
Solve for the maximum spring compression: .
(or )
02 The student neglects the work done by friction along the horizontal segment entirely, equating the initial gravitational potential energy directly to the elastic potential energy.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You treated mechanical energy as completely conserved, neglecting the non-conservative work done by friction () along the horizontal segment.
- Step 2Correct
Your algebra and numerical substitutions were carried out accurately, but they followed from the incomplete energy balance equation that omitted thermal dissipation.
- Step 3Correct
Your square root computation is internally consistent with your previous line, but the resulting value is overestimated because friction was not subtracted from the available energy.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified and computed the initial gravitational potential energy as .
You used the correct expression for the elastic potential energy of the spring.
You correctly identified that the initial and final kinetic energies are both zero.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that mechanical energy is conserved throughout the entire motion, overlooking the rough horizontal patch where kinetic energy is dissipated into thermal energy by dynamic friction ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Audit the entire path for non-conservative surfaces
Whenever a system traverses a surface with friction coefficient , friction does non-conservative work .
Scan every stage of motion (ramp, flat surface, spring) before writing the energy equation to ensure all non-conservative forces are included in .
- Work-Energy with Potential Energy Functions
When conservative forces (gravity, ideal springs) are written as potential energies , the work-energy balance is .
Set rather than zero whenever dissipative contact forces act.
CORRECTED PATH
ACEpath Teacher's DemonstrationInclude the work of friction along the horizontal segment: .
Set up the complete First Law balance with : .
Substitute values and isolate the spring term: .
Solve for compression: .
03 The student forgets the factor of 1/2 in the formula for elastic potential energy of the spring.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You correctly accounted for the work done by friction and the gravitational potential energy, but the elastic potential energy stored in a compressed spring is , not .
- Step 2Correct
Your algebraic rearrangement and numerical computation of the remaining mechanical energy () were correct, but the left-hand coefficient should be rather than .
- Step 3Correct
Because of the missing factor of from Step 1, your computed compression of is smaller than the correct value of by a factor of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly applied the work-energy principle relating the initial mechanical energy to non-conservative friction work and stored spring energy.
You calculated the work dissipated by dynamic friction along the horizontal segment accurately as .
You solved the resulting quadratic equation in with correct arithmetic and unit conversion.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote the spring potential energy term as instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the elastic potential energy formula (derived by integrating the linear restoring force ) with an unintegrated product .
REASONING PATH
Your ACEpath teacher’s suggested approach- Elastic Potential Energy Formula
Because spring force varies linearly with displacement from to , average restoring force is , giving .
Always double-check that quadratic potential energy terms include the factor of before substituting numerical values.
CORRECTED PATH
ACEpath Teacher's DemonstrationRestore the factor of in the elastic energy term:
Substitute :
Divide by :
Take the square root:
(or )
Lock it in
Why is the work done by kinetic friction always negative when an object slides along a surface?
Kinetic friction always opposes the displacement vector (), so , dissipating mechanical energy as thermal energy.
Similar question
A box slides down a frictionless incline from a vertical height of and enters a rough horizontal surface with . How far does the box slide along the rough surface before coming to a stop? Take .
Answer
. By the work-energy theorem, , so .
A cart is launched across a rough floor (, ) by a compressed horizontal spring (). If the cart emerges at the end of the rough patch with a speed of , find the initial spring compression . Take .
Answer
. Energy balance: . Evaluating terms: . Thus, .
A package is released from rest at height on a curved ramp. It crosses a rough horizontal stretch (, ) and then compresses a horizontal spring (). The spring is positioned inside the rough zone, meaning friction also acts while the spring is compressing by distance . Write the quadratic equation for and solve for the maximum compression. Take .
Answer
. Total friction work: . Energy balance: , which gives . Solving via quadratic formula yields .