Resources
An illuminated object of height is placed upright on the optical axis at an object distance of to the left of a thin converging biconvex lens with a focal length of . Determine the image distance measured from the lens center and the transverse height of the formed image, including the algebraic sign indicating its orientation.
Answer and steps
Final answer
, (the image is real, inverted, and located to the right of the lens)
Steps
Thin Lens Equation for Image Distance
For a thin lens under the standard Cartesian sign convention (light traveling from left to right):
- The focal length of a converging lens is positive: .
- The real object is placed in front of the lens: .
The thin lens equation relates the focal length, object distance, and image distance:
Rearranging to isolate :
Substitute the given numerical values:
Taking the reciprocal gives:
The positive sign confirms that the image is real and forms on the opposite side of the lens ( to the right of the lens center).
Lateral Magnification and Image Height
The lateral magnification relates the image height to the object height , as well as the distances:
Substitute and :
Now solve for the image height :
Physical Interpretation
- Sign of (): A positive image distance for a single thin lens indicates a real image formed by converging rays on the transmission (right) side of the lens.
- Sign of (): A negative height (and negative magnification) indicates that the image is vertically inverted relative to the upright object.
Common Pitfall: A frequent error is omitting the negative sign in the transverse magnification formula . Without this sign, the calculated image height would incorrectly appear positive (upright), contradicting the geometry of real images formed by a converging lens when .
Typical errors
01 The student omits the negative sign in the transverse magnification formula, concluding that the inverted image has a positive height.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
= + = - = - = d_i = = 22.5
- Step 2
m = m = = 0.500
Correctm = - = - = -0.500
You omitted the required negative sign in the lateral magnification formula for a thin lens, which is .
- Step 3
h_i = m h_o h_i = 0.500 3.50 = +1.75
Correcth_i = m h_o = (-0.500)(3.50) = -1.75
Because the magnification in step 2 lacked the negative sign, your calculated image height became positive instead of negative.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled and manipulated the thin lens equation.
You found the accurate numerical value for the image distance .
You correctly applied the relation between lateral magnification and image height.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeOmitting the negative sign in caused the inverted real image to be incorrectly labeled with a positive height.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating the magnitude ratio with the signed algebraic definition of lateral magnification .
REASONING PATH
Your ACEpath teacher’s suggested approach- Lateral Magnification Definition
For standard thin-lens Cartesian conventions, lateral magnification is defined as .
Always include the leading minus sign when computing magnification from lens distances.
- Orientation Sanity Check
When a real object produces a real image () through a single lens, the image is always inverted (, ).
Verify that the sign of matches the expected physical ray diagram orientation.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the lateral magnification definition with the negative sign: .
Substitute and to find .
Calculate image height: .
,
02 The student inverts individual terms rather than the whole sum by writing d_i = f - d_o instead of solving 1/d_i = 1/f - 1/d_o.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You inverted the individual terms by setting , but taking reciprocals does not distribute over subtraction: means .
- Step 3Correct
You applied the correct lateral magnification formula with the proper negative sign, but your calculation was affected by the incorrect value of from Step 2.
- Step 4Correct
You correctly multiplied your calculated magnification by the object height, but the numerical result and sign were affected by the earlier error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified and wrote down the standard thin lens equation.
You remembered the minus sign in the lateral magnification formula .
You correctly related image height to magnification via .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated reciprocal subtraction as if it were .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing term-by-term reciprocation with inverting the entire sum or difference. In general, , so you must combine fractions with a common denominator before inverting.
REASONING PATH
Your ACEpath teacher’s suggested approach- Fraction Addition Rule
, so .
Combine the fractions on one side first, or compute each reciprocal as a decimal, before taking the reciprocal to find .
- Physical Reality Check
For a converging lens () with an object placed beyond the focal point (), the formed image must be real () and inverted (, ).
Compare your calculated signs against ray-tracing logic: an object at beyond a focal length cannot produce a virtual, upright image.
CORRECTED PATH
ACEpath Teacher's DemonstrationRearrange the thin lens equation: .
Find a common denominator: .
Invert to solve for image distance: .
Calculate magnification: .
Calculate image height: .
,
03 The student adds rather than subtracts 1/d_o when rearranging the lens formula, using 1/d_i = 1/f + 1/d_o.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
When isolating from , you need to subtract from both sides rather than adding it.
- Step 2Correct
You correctly selected and applied the magnification formula , but the numerical value is affected by your earlier calculation.
- Step 3Correct
You correctly applied and preserved the sign convention, but the final value carries forward the error from .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly wrote down the thin lens formula .
You correctly applied the transverse magnification formula including the negative sign.
You correctly related lateral magnification to image height using .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote a plus sign instead of a minus sign when moving to the other side of the lens equation.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou rushed the isolation of without writing out the intermediate subtraction step , conflating the additive form of the lens formula with the expression for the isolated reciprocal.
REASONING PATH
Your ACEpath teacher’s suggested approach- Isolate Reciprocals Explicitly
To solve for an unknown in an additive reciprocal equation like , subtract the known term: .
Always write the isolated symbolic equation before substituting numbers.
CORRECTED PATH
ACEpath Teacher's Demonstration,
Lock it in
What is the algebraic formula for lateral magnification of a thin lens in terms of and ?
. The negative sign ensures that a positive (real image) corresponds to an inverted orientation ().
Similar question
An object of height is placed in front of a thin converging lens of focal length . Find the image distance and image height .
Answer
, . Key steps: ; ; .
An upright object of height is placed in front of a converging lens with focal length (used as a magnifying glass). Determine , , and .
Answer
, , . Key steps: (virtual image); (upright); .
A diverging lens has a focal length of . An object of height is placed in front of the lens. Calculate and , including signs.
Answer
, . Key steps: ; ; (virtual, upright, reduced).