Resources

A specialized drop-testing rig evaluates the collision of a rigid steel penetrator (m=2.50 kgm = 2.50\text{ kg}) striking various arrestor materials at an impact speed of v0=8.00 m/sv_0 = 8.00\text{ m/s}. The collision time Δt\Delta t depends inversely on the arrestor stiffness keffk_{\text{eff}} according to the relation Δt=πm4keff\Delta t = \pi \sqrt{\frac{m}{4 k_{\text{eff}}}}, bringing the penetrator to rest. (a) Derive an expression for the average force Fˉ(Δt)\bar{F}(\Delta t) exerted on the mass as a function of the collision time Δt\Delta t. (b) Calculate Fˉ\bar{F} for an ultra-soft arrestor where Δt=0.500 s\Delta t = 0.500\text{ s} versus an ultra-stiff arrestor where Δt=1.00×10−3 s\Delta t = 1.00 \times 10^{-3}\text{ s}. (c) Evaluate the asymptotic limit lim⁡Δt→0+Fˉ(Δt)\lim_{\Delta t \to 0^+} \bar{F}(\Delta t) and state its physical implication regarding impact forces on perfectly rigid surfaces.

Answer and steps

Final answer

(a) Fˉ(Δt)=mv0Δt=20.0Δt N\bar{F}(\Delta t) = \frac{m v_0}{\Delta t} = \frac{20.0}{\Delta t}\text{ N}, (b) Fˉ(0.500 s)=40.0 N\bar{F}(0.500\text{ s}) = 40.0\text{ N} and Fˉ(1.00×10−3 s)=2.00×104 N\bar{F}(1.00 \times 10^{-3}\text{ s}) = 2.00 \times 10^4\text{ N}, (c) lim⁡Δt→0+Fˉ(Δt)=+∞\lim_{\Delta t \to 0^+} \bar{F}(\Delta t) = +\infty, demonstrating that without any compliance to extend the interaction time, the theoretical instantaneous impact force on an infinitely rigid body diverges to infinity.

Steps

Part (a): Derivation of Average Force Fˉ(Δt)\bar{F}(\Delta t)

According to the impulse-momentum theorem, the net impulse JJ delivered to an object equals its total change in linear momentum Δp\Delta p:

J=FˉΔt=Δp=mvf−mviJ = \bar{F} \Delta t = \Delta p = m v_f - m v_i

Taking the direction of the initial velocity as positive, the initial velocity is vi=v0=8.00 m/sv_i = v_0 = 8.00\text{ m/s}, and the final velocity when brought to rest is vf=0 m/sv_f = 0\text{ m/s}. The magnitude of the change in momentum is:

∣Δp∣=∣0−mv0∣=mv0|\Delta p| = |0 - m v_0| = m v_0

Substituting the given values (m=2.50 kgm = 2.50\text{ kg} and v0=8.00 m/sv_0 = 8.00\text{ m/s}):

∣Δp∣=(2.50 kg)(8.00 m/s)=20.0 kg⋅m/s=20.0 N⋅s|\Delta p| = (2.50\text{ kg})(8.00\text{ m/s}) = 20.0\text{ kg}\cdot\text{m/s} = 20.0\text{ N}\cdot\text{s}

Solving for the magnitude of the average stopping force Fˉ\bar{F} as a function of the collision duration Δt\Delta t:

Fˉ(Δt)=mv0Δt=20.0Δt N\bar{F}(\Delta t) = \frac{m v_0}{\Delta t} = \frac{20.0}{\Delta t}\text{ N}


Part (b): Calculation for Ultra-Soft and Ultra-Stiff Arrestors

Using the expression derived in part (a):

  1. For the ultra-soft arrestor (Δt=0.500 s\Delta t = 0.500\text{ s}):

    Fˉ(0.500 s)=20.0 N⋅s0.500 s=40.0 N\bar{F}(0.500\text{ s}) = \frac{20.0\text{ N}\cdot\text{s}}{0.500\text{ s}} = 40.0\text{ N}

  2. For the ultra-stiff arrestor (Δt=1.00×10−3 s\Delta t = 1.00 \times 10^{-3}\text{ s}):

    Fˉ(1.00×10−3 s)=20.0 N⋅s1.00×10−3 s=2.00×104 N\bar{F}(1.00 \times 10^{-3}\text{ s}) = \frac{20.0\text{ N}\cdot\text{s}}{1.00 \times 10^{-3}\text{ s}} = 2.00 \times 10^4\text{ N}

Pitfall Note: Notice that reducing the contact time by a factor of 500500 increases the average stopping force by the exact same factor of 500500, because the required momentum change (20.0 N⋅s20.0\text{ N}\cdot\text{s}) is constant.


Part (c): Asymptotic Limit and Physical Implication

Evaluating the one-sided limit as the collision duration approaches zero:

lim⁡Δt→0+Fˉ(Δt)=lim⁡Δt→0+20.0Δt=+∞\lim_{\Delta t \to 0^+} \bar{F}(\Delta t) = \lim_{\Delta t \to 0^+} \frac{20.0}{\Delta t} = +\infty

Physical Implication:
A perfectly rigid, incompressible surface corresponds to an infinite effective stiffness (keff→∞k_{\text{eff}} \to \infty), which forces the collision time toward zero (Δt→0\Delta t \to 0). Because a finite amount of momentum must be removed in zero elapsed time, the theoretical instantaneous impact force diverges to infinity. Real-world safety arrestors, crumple zones, and cushioning devices introduce mechanical compliance specifically to extend Δt\Delta t, thereby keeping peak and average impact forces within safe, survivable structural limits.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses kinetic energy instead of momentum in the numerator, mistaking work for impulse in the time-average force formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Favg=ΔKΔt  ⟹  ΔK=12mv02=12(2.50)(8.00)2=80.0 J  ⟹  Favg=80.0Δt NF_{\text{avg}} = \frac{\Delta K}{\Delta t} \implies \Delta K = \frac{1}{2} m v_0^2 = \frac{1}{2}(2.50)(8.00)^2 = 80.0\text{ J} \implies F_{\text{avg}} = \frac{80.0}{\Delta t}\text{ N}

    Correct

    Fˉ=ΔpΔt=mv0Δt=(2.50 kg)(8.00 m/s)Δt=20.0Δt N\bar{F} = \frac{\Delta p}{\Delta t} = \frac{m v_0}{\Delta t} = \frac{(2.50\text{ kg})(8.00\text{ m/s})}{\Delta t} = \frac{20.0}{\Delta t}\text{ N}

    You used kinetic energy ΔK\Delta K instead of linear momentum Δp\Delta p. The ratio ΔKΔt\frac{\Delta K}{\Delta t} represents average power, whereas the impulse-momentum theorem defines time-averaged force as Fˉ=ΔpΔt\bar{F} = \frac{\Delta p}{\Delta t}.

  2. Step 2

    Favg(0.500)=80.00.500=160 N  ⟹  Favg(1.00×10−3)=80.01.00×10−3=8.00×104 NF_{\text{avg}}(0.500) = \frac{80.0}{0.500} = 160\text{ N} \implies F_{\text{avg}}(1.00 \times 10^{-3}) = \frac{80.0}{1.00 \times 10^{-3}} = 8.00 \times 10^4\text{ N}

    Correct

    Fˉ(0.500 s)=20.00.500=40.0 N  ⟹  Fˉ(1.00×10−3 s)=20.01.00×10−3=2.00×104 N\bar{F}(0.500\text{ s}) = \frac{20.0}{0.500} = 40.0\text{ N} \implies \bar{F}(1.00 \times 10^{-3}\text{ s}) = \frac{20.0}{1.00 \times 10^{-3}} = 2.00 \times 10^4\text{ N}

    Your arithmetic and unit substitutions were carried out accurately, but the numerical results are scaled by a factor of 44 due to the incorrect numerator from part (a).

  3. Step 3

    lim⁡Δt→0+80.0Δt=∞\lim_{\Delta t \to 0^+} \frac{80.0}{\Delta t} = \infty; "A rigid impact requires an infinite force to absorb the penetrator's kinetic energy instantaneously."

    Correct

    lim⁡Δt→0+20.0Δt=+∞\lim_{\Delta t \to 0^+} \frac{20.0}{\Delta t} = +\infty; A perfectly rigid surface brings the penetrator to rest in zero time, requiring an infinite time-rate of change of momentum and thus an infinite impact force.

    You correctly recognized that the force diverges to infinity as contact time approaches zero, though your explanation inherits the energy-based framing from part (a).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the initial kinetic energy of the penetrator.

You evaluated the limit as Δt→0+\Delta t \to 0^+ properly and recognized that zero contact time implies an infinite stopping force.

You performed all numerical substitutions in part (b) with proper scientific notation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating Impulse with Work / Energy

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the time rate of momentum change (Newton's second law / impulse-momentum theorem, FˉΔt=Δp\bar{F}\Delta t = \Delta p) with the spatial rate of energy change (work-energy theorem, FˉΔx=ΔK\bar{F}\Delta x = \Delta K). Dividing energy by time yields power (P=WΔtP = \frac{W}{\Delta t}), not force.

REASONING PATH
Your ACEpath teacher’s suggested approach
Time Average vs. Spatial Average
  • Force averaged over time is Fˉt=ΔpΔt\bar{F}_t = \frac{\Delta p}{\Delta t} (Impulse). Force averaged over distance is Fˉx=ΔKΔx\bar{F}_x = \frac{\Delta K}{\Delta x} (Work).

  • Check your denominator: if dividing by elapsed time Δt\Delta t, always place momentum change Δp\Delta p in the numerator.

Dimensional Consistency Check
  • [Force]=N=kg⋅m/s2[\text{Force}] = \text{N} = \text{kg}\cdot\text{m/s}^2. Dividing Energy (J=N⋅m\text{J} = \text{N}\cdot\text{m}) by time (s\text{s}) gives J/s=W\text{J/s} = \text{W} (Watts), not Newtons.

  • Verify units before proceeding: kg⋅m/ss=N\frac{\text{kg}\cdot\text{m/s}}{\text{s}} = \text{N} confirms that momentum over time yields force.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the impulse-momentum theorem: J=FˉΔt=∣Δp∣=mv0J = \bar{F}\Delta t = |\Delta p| = m v_0.

  2. Substitute m=2.50 kgm = 2.50\text{ kg} and v0=8.00 m/sv_0 = 8.00\text{ m/s} to find ∣Δp∣=20.0 N⋅s|\Delta p| = 20.0\text{ N}\cdot\text{s}.

  3. Solve for average force: Fˉ(Δt)=20.0Δt N\bar{F}(\Delta t) = \frac{20.0}{\Delta t}\text{ N}.

  4. Evaluate at Δt=0.500 s\Delta t = 0.500\text{ s}: Fˉ=20.00.500=40.0 N\bar{F} = \frac{20.0}{0.500} = 40.0\text{ N}.

  5. Evaluate at Δt=1.00×10−3 s\Delta t = 1.00 \times 10^{-3}\text{ s}: Fˉ=20.01.00×10−3=2.00×104 N\bar{F} = \frac{20.0}{1.00 \times 10^{-3}} = 2.00 \times 10^4\text{ N}.

Final answer

(a) Fˉ(Δt)=20.0Δt N\bar{F}(\Delta t) = \frac{20.0}{\Delta t}\text{ N}, (b) Fˉ(0.500 s)=40.0 N\bar{F}(0.500\text{ s}) = 40.0\text{ N} and Fˉ(1.00×10−3 s)=2.00×104 N\bar{F}(1.00 \times 10^{-3}\text{ s}) = 2.00 \times 10^4\text{ N}, (c) lim⁡Δt→0+Fˉ(Δt)=+∞\lim_{\Delta t \to 0^+} \bar{F}(\Delta t) = +\infty

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fundamental difference between the impulse-momentum theorem (J=FˉΔt=ΔpJ = \bar{F}\Delta t = \Delta p) and the work-energy theorem (W=FˉΔx=ΔKW = \bar{F}\Delta x = \Delta K).

  • Practice dimensional analysis on definitions of average quantities to ensure force, energy, and power are never mixed up.

  • Complete the targeted flashcards and practice problems below to master calculating impact forces across different collision durations.

OverviewACEpath Teacher's Diagnosis

02 The student multiplies momentum by collision time instead of dividing, confusing the relationship F_avg = Δp / Δt with F_avg = Δp · Δt.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δp=mv0=(2.50)(8.00)=20.0 kg⋅m/s\Delta p = m v_0 = (2.50)(8.00) = 20.0\text{ kg}\cdot\text{m/s}

  2. Step 2

    F_{avg\text{avg}} = Δ\Delta p ⋅\cdot Δ\Delta t = 20.0 Δ\Delta t N\text{ N}_

    Correct

    Fˉ\bar{F}(Δ\Delta t) = ΔpΔt\frac{\Delta p}{\Delta t} = $\frac{20.0}{\Delta t} N\text{ N}

    From the impulse-momentum theorem, J=FˉΔt=ΔpJ = \bar{F} \Delta t = \Delta p. Solving for average force requires dividing by Δt\Delta t, giving Fˉ=ΔpΔt\bar{F} = \frac{\Delta p}{\Delta t}, not multiplying.

  3. Step 3

    F_{avg\text{avg}}(0.500) = 20.0(0.500) = 10.0 N\text{ N}   ⟹  \implies F_{avg\text{avg}}(1.00 ×\times 10^{-3}) = 20.0(1.00 ×\times 10^{-3}) = 0.0200 N\text{ N}

    Correct

    Fˉ\bar{F}(0.500 s\text{ s}) = 20.00.500\frac{20.0}{0.500} = 40.0 N\text{ N}   ⟹  \implies Fˉ\bar{F}(1.00 ×\times 10^{-3} s\text{ s}) = 20.01.00×10−3\frac{20.0}{1.00 \times 10^{-3}} = 2.00 ×\times 10^4 N\text{ N}

    You substituted the given collision times accurately into your formula, but the numerical results reflect the inverted force relationship from step 2.

  4. Step 4

    $\lim_{Δ\Delta t →\to 0^+}$ 20.0 \Delta t = 0\text{ N} \implies \text{This incorrectly implies that a rigid collision where collision time approaches zero produces no force at all.}_

    Correct

    $\lim_{Δ\Delta t →\to 0^+}$ \frac{20.0}{\Delta t} = +\infty_

    You correctly noticed that your expression leads to an unphysical conclusion for rigid collisions, but the root cause was the inverted formula in part (a). As Δt→0+\Delta t \to 0^+, the true impact force diverges to infinity.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly determined the penetrator's change in momentum using Δp=mv0\Delta p = m v_0.

You showed great physical intuition by recognizing that an impact force approaching zero during a rigid collision is unphysical.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Rate Definition

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the product form of impulse (J=FΔtJ = F \Delta t) with the definition of average force, multiplying momentum by elapsed time instead of dividing (Favg=ΔpΔtF_{\text{avg}} = \frac{\Delta p}{\Delta t}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Impulse-Momentum Relationship
  • Impulse J=FˉΔt=Δp  ⟹  Fˉ=ΔpΔt\text{Impulse } J = \bar{F} \Delta t = \Delta p \implies \bar{F} = \frac{\Delta p}{\Delta t}

  • Check that force has units of momentum per second (N=kg⋅m/s2=(kg⋅m/s)/s\text{N} = \text{kg}\cdot\text{m/s}^2 = (\text{kg}\cdot\text{m/s})/\text{s}).

Qualitative Sanity Check
  • Shorter collision times concentrate momentum transfer into less time, creating much larger impact forces.

  • Verify that decreasing Δt\Delta t increases Fˉ\bar{F} rather than decreasing it.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the impulse-momentum theorem: FˉΔt=Δp\bar{F} \Delta t = \Delta p.

  2. Solve for the average force: Fˉ(Δt)=ΔpΔt=20.0Δt N\bar{F}(\Delta t) = \frac{\Delta p}{\Delta t} = \frac{20.0}{\Delta t}\text{ N}.

  3. Evaluate part (b): Fˉ(0.500 s)=20.00.500=40.0 N\bar{F}(0.500\text{ s}) = \frac{20.0}{0.500} = 40.0\text{ N} and Fˉ(1.00×10−3 s)=20.01.00×10−3=2.00×104 N\bar{F}(1.00 \times 10^{-3}\text{ s}) = \frac{20.0}{1.00 \times 10^{-3}} = 2.00 \times 10^4\text{ N}.

  4. Evaluate part (c): lim⁡Δt→0+20.0Δt=+∞\lim_{\Delta t \to 0^+} \frac{20.0}{\Delta t} = +\infty.

Final answer

(a) Fˉ(Δt)=20.0Δt N\bar{F}(\Delta t) = \frac{20.0}{\Delta t}\text{ N}; (b) Fˉ(0.500 s)=40.0 N\bar{F}(0.500\text{ s}) = 40.0\text{ N} and Fˉ(1.00×10−3 s)=2.00×104 N\bar{F}(1.00 \times 10^{-3}\text{ s}) = 2.00 \times 10^4\text{ N}; (c) lim⁡Δt→0+Fˉ(Δt)=+∞\lim_{\Delta t \to 0^+} \bar{F}(\Delta t) = +\infty, showing that stopping a moving mass in zero time requires an infinite force.

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write Newton's second law in rate form, Fˉ=ΔpΔt\bar{F} = \frac{\Delta p}{\Delta t}, before substituting values.

  • Perform a quick dimensional check: verify that (kg⋅m/s)/s=N(\text{kg}\cdot\text{m/s}) / \text{s} = \text{N} before proceeding with calculations.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to invert the power of ten when dividing by 1.00 × 10⁻³, resulting in a small force instead of a large force for the stiff arrestor.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δp=mv0=(2.50)(8.00)=20.0 kg⋅m/s  ⟹  Favg=ΔpΔt=20.0Δt N\Delta p = m v_0 = (2.50)(8.00) = 20.0\text{ kg}\cdot\text{m/s} \implies F_{\text{avg}} = \frac{\Delta p}{\Delta t} = \frac{20.0}{\Delta t}\text{ N}

  2. Step 2

    Favg(0.500)=40.0 NF_{\text{avg}}(0.500) = 40.0\text{ N}

  3. Step 3

    Favg(1.00×10−3)=20.0×10−3=0.0200 NF_{\text{avg}}(1.00 \times 10^{-3}) = 20.0 \times 10^{-3} = 0.0200\text{ N}

    Correct

    Fˉ(1.00×10−3 s)=20.0 N⋅s1.00×10−3 s=2.00×104 N\bar{F}(1.00 \times 10^{-3}\text{ s}) = \frac{20.0\text{ N}\cdot\text{s}}{1.00 \times 10^{-3}\text{ s}} = 2.00 \times 10^4\text{ N}

    You multiplied by 10−310^{-3} instead of dividing by 1.00×10−31.00 \times 10^{-3}. When a denominator contains 10−310^{-3}, dividing by it is equivalent to multiplying the numerator by 10310^3, giving 20.0×103=2.00×104 N20.0 \times 10^3 = 2.00 \times 10^4\text{ N}.

  4. Step 4

    lim⁡Δt→0+20.0Δt=∞  ⟹  An infinitely rigid surface experiences an infinite impact force because the momentum changes in zero time.\lim_{\Delta t \to 0^+} \frac{20.0}{\Delta t} = \infty \implies \text{An infinitely rigid surface experiences an infinite impact force because the momentum changes in zero time.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the initial momentum and change in momentum as 20.0 kg⋅m/s20.0\text{ kg}\cdot\text{m/s}.

You correctly set up the formula for average impact force as an inverse function of contact time.

You clearly explained why a collision with zero duration produces an infinite impact force.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Negative exponent inversion error in denominator

You treated division by 10−310^{-3} as multiplication by 10−310^{-3}, which produced a force smaller than the soft arrestor force instead of significantly larger.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Misinterpreting powers of ten in fractions: dividing by 10−n10^{-n} requires negating the exponent to get ×10n\times 10^n. Physically, a much stiffer barrier stops the penetrator much faster, which must produce a dramatically larger force, not a smaller one.

REASONING PATH
Your ACEpath teacher’s suggested approach
Exponent Inversion Rule
  • A10−n=A×10n\frac{A}{10^{-n}} = A \times 10^n

  • Move negative powers of ten from the denominator to the numerator by switching the negative sign to positive.

Physical Reality Check
  • Shorter contact time   ⟹  \implies larger average force ( Fˉ∝1Δt \,\bar{F} \propto \frac{1}{\Delta t}\,).

  • Always verify that a stiffer arrestor (smaller Δt\Delta t) yields a substantially higher stopping force than a soft arrestor.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute Δt=1.00×10−3 s\Delta t = 1.00 \times 10^{-3}\text{ s} into the denominator: Fˉ=20.0 N⋅s1.00×10−3 s\bar{F} = \frac{20.0\text{ N}\cdot\text{s}}{1.00 \times 10^{-3}\text{ s}}.

  2. Invert the negative power in the denominator: 20.01.00×10−3=20.0×103 N\frac{20.0}{1.00 \times 10^{-3}} = 20.0 \times 10^3\text{ N}.

  3. Express the result in standard scientific notation: 2.00×104 N2.00 \times 10^4\text{ N}.

Final answer

Fˉ(1.00×10−3 s)=2.00×104 N\bar{F}(1.00 \times 10^{-3}\text{ s}) = 2.00 \times 10^4\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review quotient operations with scientific notation, specifically noting that 110−n=10n\frac{1}{10^{-n}} = 10^n.

  • Perform a quick sanity check whenever solving inverse-proportionality problems: if Δt\Delta t decreases by a factor of 500500, force must increase by a factor of 500500.

Lock it in

Similar question

01

A 0.150 kg0.150\text{ kg} baseball moving horizontally at 40.0 m/s40.0\text{ m/s} is caught and brought to rest by a catcher. (a) If the catcher's glove recoils backward, bringing the ball to rest over Δt=0.0500 s\Delta t = 0.0500\text{ s}, find the average force exerted on the ball. (b) If the ball instead strikes a rigid brick wall and stops in Δt=2.00×10−3 s\Delta t = 2.00 \times 10^{-3}\text{ s}, find the new average force.

Answer

(a) Fˉ=120 N\bar{F} = 120\text{ N}; (b) Fˉ=3.00×103 N\bar{F} = 3.00 \times 10^3\text{ N}. Key steps: Δp=mv0=(0.150 kg)(40.0 m/s)=6.00 N⋅s\Delta p = m v_0 = (0.150\text{ kg})(40.0\text{ m/s}) = 6.00\text{ N}\cdot\text{s}. (a) Fˉ=6.00 N⋅s0.0500 s=120 N\bar{F} = \frac{6.00\text{ N}\cdot\text{s}}{0.0500\text{ s}} = 120\text{ N}. (b) Fˉ=6.00 N⋅s2.00×10−3 s=3000 N\bar{F} = \frac{6.00\text{ N}\cdot\text{s}}{2.00 \times 10^{-3}\text{ s}} = 3000\text{ N}.

02

A 1200 kg1200\text{ kg} car traveling at 15.0 m/s15.0\text{ m/s} crashes into a barrier and stops. An engineer can design a crumple zone that extends the collision duration to Δt=0.300 s\Delta t = 0.300\text{ s}. (a) Calculate the average impact force Fˉ\bar{F}. (b) If the driver has a mass of 70.0 kg70.0\text{ kg}, calculate the average deceleration and the average restraint force acting on the driver during this collision.

Answer

(a) Fˉ=6.00×104 N\bar{F} = 6.00 \times 10^4\text{ N}; (b) aˉ=50.0 m/s2\bar{a} = 50.0\text{ m/s}^2 (approx 5.1 g5.1\text{ g}) and Fˉdriver=3.50×103 N\bar{F}_{\text{driver}} = 3.50 \times 10^3\text{ N}. Key steps: Total momentum Δpcar=(1200)(15.0)=1.80×104 N⋅s\Delta p_{\text{car}} = (1200)(15.0) = 1.80 \times 10^4\text{ N}\cdot\text{s}. (a) Fˉ=1.80×1040.300=6.00×104 N\bar{F} = \frac{1.80 \times 10^4}{0.300} = 6.00 \times 10^4\text{ N}. (b) Acceleration aˉ=ΔvΔt=15.00.300=50.0 m/s2\bar{a} = \frac{\Delta v}{\Delta t} = \frac{15.0}{0.300} = 50.0\text{ m/s}^2. Driver force Fˉdriver=mdriveraˉ=(70.0)(50.0)=3500 N\bar{F}_{\text{driver}} = m_{\text{driver}}\bar{a} = (70.0)(50.0) = 3500\text{ N}.

03

A payload of mass mm strikes a surface with speed v0v_0 and is cushioned by a non-linear arrestor that exerts a time-dependent stopping force F(t)=Fpeaksin⁡(πtΔt)F(t) = F_{\text{peak}} \sin\left(\frac{\pi t}{\Delta t}\right) over the interval t∈[0,Δt]t \in [0, \Delta t], bringing the payload to rest at t=Δtt = \Delta t. (a) Express the impulse JJ in terms of FpeakF_{\text{peak}} and Δt\Delta t. (b) Derive an expression for the peak force FpeakF_{\text{peak}} in terms of mm, v0v_0, and Δt\Delta t. (c) Compare FpeakF_{\text{peak}} to the average force Fˉ\bar{F} over the same interval.

Answer

(a) J=2πFpeakΔtJ = \frac{2}{\pi} F_{\text{peak}} \Delta t; (b) Fpeak=πmv02ΔtF_{\text{peak}} = \frac{\pi m v_0}{2 \Delta t}; (c) Fpeak=π2Fˉ≈1.57FˉF_{\text{peak}} = \frac{\pi}{2} \bar{F} \approx 1.57 \bar{F}. Key steps: (a) J=∫0ΔtFpeaksin⁡(πtΔt)dt=Fpeak[−Δtπcos⁡(πtΔt)]0Δt=2πFpeakΔtJ = \int_0^{\Delta t} F_{\text{peak}} \sin\left(\frac{\pi t}{\Delta t}\right) dt = F_{\text{peak}} \left[-\frac{\Delta t}{\pi}\cos\left(\frac{\pi t}{\Delta t}\right)\right]_0^{\Delta t} = \frac{2}{\pi} F_{\text{peak}} \Delta t. (b) By impulse-momentum, J=mv0  ⟹  Fpeak=πmv02ΔtJ = m v_0 \implies F_{\text{peak}} = \frac{\pi m v_0}{2 \Delta t}. (c) Since Fˉ=mv0Δt\bar{F} = \frac{m v_0}{\Delta t}, we have Fpeak=π2FˉF_{\text{peak}} = \frac{\pi}{2} \bar{F}.

Loading workspace…