Resources

A student models charging an electroscope by induction using a coordinate system where positive displacement corresponds to the +x+x-direction. A positively charged glass rod carrying Qrod=+4.80 nCQ_{\text{rod}} = +4.80\text{ nC} is brought close to the conducting knob of an uncharged electroscope (fixed along the xx-axis) without physical contact, inducing an electron redistribution. The knob is momentarily connected to a ground line and then the ground line is disconnected while the rod remains in place. Finally, the glass rod is removed to infinity. (a) By tracking fundamental charge carriers (e=1.602×10−19 Ce = 1.602 \times 10^{-19}\text{ C}), determine the algebraic sign of the conventional electric current that flowed into the ground line during grounding. (b) If 1.50×10101.50 \times 10^{10} electrons transferred through the grounding wire during this interval, calculate the net final charge QfinalQ_{\text{final}} of the electroscope, explicitly including its proper mathematical sign.

Answer and steps

Final answer

(a) Electrons flowed from ground to the knob, meaning conventional electric current flowed from the electroscope to ground (negative charge entered the system, positive current exited); (b) Qfinal=−2.40 nCQ_{\text{final}} = -2.40\text{ nC}

Steps

Part (a): Direction and Sign of the Conventional Current

  1. Charge Redistribution Before Grounding: When the positively charged rod (Qrod>0Q_{\text{rod}} > 0) is brought near the neutral conducting knob of the electroscope, it attracts mobile conduction electrons toward the knob, leaving the leaves and stem with a deficiency of electrons (a net positive charge).
  2. Electron Flow During Grounding: Ground acts as an effectively infinite reservoir of charge at zero electric potential. Because the electroscope resides in the positive electric potential established by the glass rod, electrons from the ground are attracted toward the positively charged knob. Therefore, electrons travel from the ground into the electroscope knob.
  3. Conventional Current Direction: Conventional current is defined as the direction in which positive charge carriers would move. Because physical current is carried by negatively charged electrons: Current direction=−(Direction of electron velocity)\text{Current direction} = -(\text{Direction of electron velocity}) Since negative electrons enter the electroscope from the ground, the conventional electric current flows in the opposite direction—from the electroscope into the ground wire.

    Common Pitfall: Do not confuse the physical movement of charge carriers with conventional current. Even though electrons are entering the electroscope, conventional current leaves the electroscope and enters the ground line (positive current directed toward the ground).


Part (b): Net Final Charge of the Electroscope

  1. Charge Trapping: When the grounding wire is disconnected while the rod is still held nearby, the excess electrons that flowed onto the electroscope are trapped.
  2. Removal of the Rod: When the glass rod is subsequently removed to infinity, the trapped excess electrons redistribute uniformly over the entire electroscope (knob, stem, and leaves), leaving it with a net negative charge.
  3. Calculating QfinalQ_{\text{final}}: The total charge acquired is determined by the number of excess electrons Ne=1.50×1010N_e = 1.50 \times 10^{10} and the elementary charge e=1.602×10−19 Ce = 1.602 \times 10^{-19}\text{ C}: Qfinal=−NeeQ_{\text{final}} = -N_e e Qfinal=−(1.50×1010)(1.602×10−19 C)Q_{\text{final}} = -(1.50 \times 10^{10})(1.602 \times 10^{-19}\text{ C}) Qfinal=−2.403×10−9 C≈−2.40 nCQ_{\text{final}} = -2.403 \times 10^{-9}\text{ C} \approx -2.40\text{ nC}

Thus, the final net charge on the electroscope is −2.40 nC-2.40\text{ nC}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student equates the direction of conventional current with the physical flow of electrons, concluding the current into ground is negative.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Electrons move from ground into the knob.

  2. Step 2

    Current into ground is in the direction of electron flow. ⟹\Longrightarrow Sign of conventional current into ground = negative

    Correct

    Conventional current direction is opposite to electron flow: since electrons flow from ground to knob, conventional current flows from knob into ground (positive).

    Conventional current is defined as the flow of positive charge carriers. Because electrons carry negative charge, conventional current flows in the opposite direction of electron motion. Since electrons flow out of the ground into the knob, conventional current flows from the knob into the ground, making the conventional current directed into the ground positive.

  3. Step 3

    Qfinal=−N×e⟹Qfinal=−(1.50×1010)(1.602×10−19 C)⟹Qfinal=−2.40×10−9 CQ_{\text{final}} = -N \times e \Longrightarrow Q_{\text{final}} = -(1.50 \times 10^{10})(1.602 \times 10^{-19}\text{ C}) \Longrightarrow Q_{\text{final}} = -2.40 \times 10^{-9}\text{ C}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that mobile electrons travel from ground into the knob due to the attractive force from the positive rod.

You correctly applied the formula Q=−NeQ = -N e to calculate the final trapped charge with the correct magnitude and sign.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conventional Current Direction vs. Electron Flow

You assumed that conventional electric current points in the same direction as the physical flow of electrons.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the flow direction of negative charge carriers with the sign and direction of conventional current, which is defined by the motion of equivalent positive charge carriers.

REASONING PATH
Your ACEpath teacher’s suggested approach
Conventional Current Definition
  • Conventional current vector points opposite to electron drift velocity: I⃗=−nqeAv⃗d\vec{I} = -n q_e A \vec{v}_d.

  • Whenever electrons move in one direction, reverse the direction arrow when labeling conventional electric current.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Observe that conduction electrons move from ground upward into the electroscope knob.

  2. Apply the definition of conventional current: positive charge moving or negative charge moving in reverse.

  3. Conclude that electrons leaving ground is equivalent to positive charge entering ground, so the conventional current flowing into the ground line is positive.

Final answer

(a) Positive conventional current; (b) Qfinal=−2.40 nCQ_{\text{final}} = -2.40\text{ nC}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the historical definition of conventional current established by Benjamin Franklin.

  • Practice drawing two parallel arrows on circuit diagrams: one for actual electron flow and one in reverse for conventional current.

OverviewACEpath Teacher's Diagnosis

02 The student confuses charging by induction with charging by conduction, mistakenly concluding the electroscope acquires the same positive sign as the rod.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Electrons flow up from ground into the knob. Conventional current flows opposite to electrons into the ground. Sign of conventional current into ground = positive

  2. Step 2

    Charging by the rod gives the electroscope the rod's charge sign.

    Correct

    Charging by induction results in a net charge opposite to the inducing object because electrons were pulled from ground onto the electroscope (Qfinal<0Q_{\text{final}} < 0).

    You applied the rule for charging by conduction (direct contact) rather than induction. In charging by induction, grounding allows opposite charges (electrons) to enter the electroscope, leaving it with a net negative charge once the ground is disconnected.

  3. Step 3

    Qfinal=+(1.50×1010)(1.602×10−19 C)  ⟹  Qfinal=+2.40×10−9 CQ_{\text{final}} = +(1.50 \times 10^{10})(1.602 \times 10^{-19}\text{ C}) \implies Q_{\text{final}} = +2.40 \times 10^{-9}\text{ C}

    Correct

    Qfinal=−Nee=−(1.50×1010)(1.602×10−19 C)=−2.40×10−9 C=−2.40 nCQ_{\text{final}} = -N_e e = -(1.50 \times 10^{10})(1.602 \times 10^{-19}\text{ C}) = -2.40 \times 10^{-9}\text{ C} = -2.40\text{ nC}

    You calculated the correct magnitude (2.40×10−9 C2.40 \times 10^{-9}\text{ C}), but carried forward the incorrect positive sign from your assumption in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that mobile electrons are drawn from the ground reservoir into the conducting knob by the nearby positive rod.

You properly applied the definition of conventional current flowing opposite to the displacement of negative charge carriers.

You correctly calculated the magnitude of the transferred charge using Q=NeeQ = N_e e.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conduction vs. Induction Sign Confusion

You knew that electrons entered the electroscope in part (a), but reverted to a heuristic that charging gives the rod's sign when setting up part (b).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing charging by conduction with charging by induction. Charging by contact (conduction) imparts the same charge sign as the source, whereas charging by induction with grounding traps the opposite charge sign because mobile carriers flow to cancel the external potential.

REASONING PATH
Your ACEpath teacher’s suggested approach
Induction Sign Rule
  • An object charged by induction with a ground connection always acquires the OPPOSITE sign of the inducing charged object.

  • Always verify the net sign by asking: 'Did the object gain or lose electrons during grounding?' Gaining electrons always results in a net negative charge.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Because 1.50×10101.50 \times 10^{10} electrons were pulled into the electroscope from ground and trapped when the ground wire was removed, the electroscope has an excess of negative charge carriers.

  2. Multiply the excess electron count by the elementary charge and apply the negative sign: Qfinal=−Nee=−(1.50×1010)(1.602×10−19 C)Q_{\text{final}} = -N_e e = -(1.50 \times 10^{10})(1.602 \times 10^{-19}\text{ C}).

  3. Simplify the product: Qfinal=−2.403×10−9 C≈−2.40 nCQ_{\text{final}} = -2.403 \times 10^{-9}\text{ C} \approx -2.40\text{ nC}.

Final answer

Qfinal=−2.40 nCQ_{\text{final}} = -2.40\text{ nC}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between charging by conduction (same sign via contact) and charging by induction (opposite sign via grounding).

  • Always cross-check the final charge sign against your carrier flow direction from part (a): excess electrons mean Q<0Q < 0.

OverviewACEpath Teacher's Diagnosis

03 The student assumes positive charges (protons) physically move through the wire toward ground, resulting in a negative current into ground.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Positive charges are repelled by the rod and flow into ground.  ⟹  Conventional current direction is opposite to flow into ground.  ⟹  Sign of conventional current into ground=negative\text{Positive charges are repelled by the rod and flow into ground.} \implies \text{Conventional current direction is opposite to flow into ground.} \implies \text{Sign of conventional current into ground} = \text{negative}

    Correct

    Conduction electrons move from ground into the electroscope knob.  ⟹  I=−dqedt  ⟹  Conventional current flows from electroscope to ground (positive into ground).\text{Conduction electrons move from ground into the electroscope knob.} \implies I = -\frac{dq_e}{dt} \implies \text{Conventional current flows from electroscope to ground (positive into ground)}.

    In solid metal conductors, atomic nuclei (protons) are bound to the crystal lattice and do not flow; only free conduction electrons move. The positively charged rod creates a region of positive potential that attracts electrons from the ground up into the electroscope. Because conventional current is defined opposite to the flow of negative charge carriers, electrons entering from ground correspond to a positive conventional current directed into the ground line.

  2. Step 2

    Loss of positive charge leaves the electroscope negative.  ⟹  Qfinal=−(1.50×1010)(1.602×10−19 C)  ⟹  Qfinal=−2.40×10−9 C\text{Loss of positive charge leaves the electroscope negative.} \implies Q_{\text{final}} = -(1.50 \times 10^{10})(1.602 \times 10^{-19}\text{ C}) \implies Q_{\text{final}} = -2.40 \times 10^{-9}\text{ C}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the elementary charge value to calculate the net charge magnitude.

You correctly concluded that the final net charge on the electroscope is negative.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misconception regarding charge carrier mobility and conventional current definition

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that positive charges physically migrate through metallic conductors and confused the definition of conventional current, which represents the direction of positive charge flow, not the reverse.

REASONING PATH
Your ACEpath teacher’s suggested approach
Mobile Charge Carriers in Conductors
  • Only conduction electrons migrate through solid metal wires; positive nuclei remain fixed in the lattice.

  • Always track the motion of negative electrons first when analyzing charging or grounding in metal conductors.

Conventional Current Direction
  • Conventional current II points in the direction that positive charge would move, which is opposite to the drift velocity of electrons.

  • If electrons move in direction v⃗e\vec{v}_e, define the conventional current vector as pointing along −v⃗e-\vec{v}_e.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that the positive glass rod attracts mobile electrons from the ground reservoir into the electroscope knob.

  2. Since negative electrons enter the electroscope from ground, the flow of negative charge into the electroscope corresponds to conventional current leaving the electroscope and entering ground.

  3. Therefore, the algebraic sign of conventional current flowing into the ground line is positive.

Final answer

(a) Positive current into the ground line; (b) Qfinal=−2.40 nCQ_{\text{final}} = -2.40\text{ nC}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review microscopic conduction models in metals to reinforce that protons never move in solid wires.

  • Practice drawing electron velocity vectors alongside conventional current arrows during charging by induction.

Lock it in

Similar question

01

A negatively charged plastic rod is brought near an uncharged conducting sphere, and the sphere is grounded. State the direction of electron flow through the ground wire and determine the algebraic sign of the conventional current entering the sphere from ground.

Answer

Electrons are repelled by the negative rod and flow from the sphere into ground. Therefore, conventional current flows from ground into the sphere, so the conventional current entering the sphere is positive.

02

During a lightning strike, 2.00×10192.00 \times 10^{19} electrons move downward from a cloud into the Earth in 25.0 ms25.0\text{ ms}. Calculate the magnitude and specify the direction (upward or downward) of the conventional current.

Answer

I=ΔqΔt=(2.00×1019)(1.602×10−19 C)0.0250 s=1.28×102 A=128 AI = \frac{\Delta q}{\Delta t} = \frac{(2.00 \times 10^{19})(1.602 \times 10^{-19}\text{ C})}{0.0250\text{ s}} = 1.28 \times 10^2\text{ A} = 128\text{ A}. Since electrons travel downward, conventional current is directed upward.

03

A beam of alpha particles (charge +2e+2e) moves along +x+x with rate 1.0×1012 particles/s1.0 \times 10^{12}\text{ particles/s}, while a concentric beam of electrons moves along −x-x with rate 3.0×1012 electrons/s3.0 \times 10^{12}\text{ electrons/s}. Find the net conventional current in the +x+x-direction.

Answer

Both beams contribute current in the +x+x-direction: Iα=(1.0×1012)(2×1.602×10−19 C/s)=0.320 μAI_{\alpha} = (1.0 \times 10^{12})(2 \times 1.602 \times 10^{-19}\text{ C/s}) = 0.320\text{ }\mu\text{A} and Ie=(3.0×1012)(1.602×10−19 C/s)=0.481 μAI_e = (3.0 \times 10^{12})(1.602 \times 10^{-19}\text{ C/s}) = 0.481\text{ }\mu\text{A}. Net current Inet=0.320+0.481=+0.801 μAI_{\text{net}} = 0.320 + 0.481 = +0.801\text{ }\mu\text{A} along +x+x.

Loading workspace…