Resources

An electric DC motor armature has an area of A=0.0150 m2A = 0.0150\text{ m}^2, contains N=120 turnsN = 120\text{ turns}, and carries a steady current of I=2.40 AI = 2.40\text{ A} within a uniform magnetic field B=0.650 TB = 0.650\text{ T}. The motor experiences an instantaneous torque of τ=1.85 N⋅m\tau = 1.85\text{ N}\cdot\text{m}. Determine the acute angle ϕ\phi between the plane of the rotating armature coil and the direction of the magnetic field lines at this instant.

Answer and steps

Final answer

ϕ=48.7∘\phi = 48.7^{\circ} (or 0.850 rad0.850\text{ rad})

Steps

01

Torque on a Current-Carrying Coil

A rectangular or planar coil of NN turns carrying a current II in a uniform magnetic field BB experiences a magnetic torque given by:

τ=NIABsin⁡θ\tau = N I A B \sin\theta

where:

  • AA is the area of the coil,
  • θ\theta is the angle between the magnetic field vector B⃗\vec{B} and the normal vector n^\hat{n} perpendicular to the plane of the coil.
02

Relating the Angles

The problem specifies the angle ϕ\phi between the plane of the coil and the direction of the magnetic field lines B⃗\vec{B}.

Since the normal to the coil is perpendicular to the plane of the coil:

θ+ϕ=90∘  ⟹  sin⁡θ=cos⁡ϕ\theta + \phi = 90^\circ \implies \sin\theta = \cos\phi

Substituting this into the torque formula gives:

τ=NIABcos⁡ϕ\tau = N I A B \cos\phi

Common Pitfall: Using sin⁡ϕ\sin\phi instead of cos⁡ϕ\cos\phi. Torque is maximum when the coil's plane is parallel to the field (ϕ=0∘\phi = 0^\circ, so cos⁡0∘=1\cos 0^\circ = 1) and zero when the coil's plane is perpendicular to the field (ϕ=90∘\phi = 90^\circ, so cos⁡90∘=0\cos 90^\circ = 0).


03

Calculating Maximum Torque

First, calculate the maximum possible torque τmax⁡=NIAB\tau_{\max} = N I A B:

τmax⁡=(120)⋅(2.40 A)⋅(0.0150 m2)⋅(0.650 T)\tau_{\max} = (120) \cdot (2.40\text{ A}) \cdot (0.0150\text{ m}^2) \cdot (0.650\text{ T})

τmax⁡=2.808 N⋅m\tau_{\max} = 2.808\text{ N}\cdot\text{m}


04

Solving for the Angle ϕ\phi

Rearrange the equation to isolate cos⁡ϕ\cos\phi:

cos⁡ϕ=ττmax⁡=1.85 N⋅m2.808 N⋅m≈0.6588\cos\phi = \frac{\tau}{\tau_{\max}} = \frac{1.85\text{ N}\cdot\text{m}}{2.808\text{ N}\cdot\text{m}} \approx 0.6588

Taking the inverse cosine:

ϕ=arccos⁡(0.6588)≈48.7∘(or 0.850 rad)\phi = \arccos(0.6588) \approx 48.7^\circ \quad (\text{or } 0.850\text{ rad})

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student directly uses the angle between the coil plane and the magnetic field in the formula τ = N I A B sinφ, confusing the coil's plane with its normal vector.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    τ=NIABsin⁡ϕ  ⟹  1.85=120×2.40×0.0150×0.650×sin⁡ϕ\tau = NIAB \sin\phi \implies 1.85 = 120 \times 2.40 \times 0.0150 \times 0.650 \times \sin\phi

    Correct

    τ=NIABsin⁡θ=NIABcos⁡ϕ  ⟹  1.85=120×2.40×0.0150×0.650×cos⁡ϕ\tau = NIAB \sin\theta = NIAB \cos\phi \implies 1.85 = 120 \times 2.40 \times 0.0150 \times 0.650 \times \cos\phi

    The standard torque relation τ=NIABsin⁡θ\tau = NIAB \sin\theta uses the angle θ\theta between the magnetic field B⃗\vec{B} and the normal vector n^\hat{n} perpendicular to the coil plane. Because ϕ\phi is the angle between the magnetic field and the coil's plane itself, θ+ϕ=90∘\theta + \phi = 90^\circ, which means sin⁡θ=cos⁡ϕ\sin\theta = \cos\phi.

  2. Step 2

    1.85=2.808sin⁡ϕ  ⟹  sin⁡ϕ=1.852.808≈0.6591.85 = 2.808 \sin\phi \implies \sin\phi = \frac{1.85}{2.808} \approx 0.659

    Correct

    1.85=2.808cos⁡ϕ  ⟹  cos⁡ϕ=1.852.808≈0.6591.85 = 2.808 \cos\phi \implies \cos\phi = \frac{1.85}{2.808} \approx 0.659

    Your arithmetic solving for the trigonometric ratio was accurate, but it propagates the initial use of sine instead of cosine.

  3. Step 3

    ϕ=arcsin⁡(0.659)≈41.2∘\phi = \arcsin(0.659) \approx 41.2^\circ

    Correct

    ϕ=arccos⁡(0.659)≈48.7∘\phi = \arccos(0.659) \approx 48.7^\circ

    Evaluating the inverse cosine instead of the inverse sine yields the acute angle between the coil's plane and the field lines.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified all given numerical values and their appropriate units.

You calculated the product NIAB=2.808 N⋅mNIAB = 2.808\text{ N}\cdot\text{m} accurately.

You executed the inverse trigonometric evaluation correctly according to your setup.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Geometric angle misidentification

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the angle ϕ\phi between the plane of the coil and the magnetic field as the angle in τ=NIABsin⁡θ\tau = NIAB \sin\theta, forgetting that the formula's angle is measured relative to the normal vector perpendicular to the coil plane.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Vector Check
  • In τ⃗=μ⃗×B⃗\vec{\tau} = \vec{\mu} \times \vec{B}, the angle θ\theta is strictly measured between the normal vector n^\hat{n} (or magnetic moment μ⃗\vec{\mu}) and the magnetic field B⃗\vec{B}.

  • Always sketch the coil, draw the perpendicular normal line n^\hat{n}, and check whether the given angle is relative to the plane or the normal.

Complementary Angle Identity
  • When an angle ϕ\phi is measured relative to the coil surface/plane, ϕ=90∘−θ\phi = 90^\circ - \theta, so sin⁡θ=cos⁡ϕ\sin\theta = \cos\phi.

  • Replace sin⁡\sin with cos⁡\cos whenever the angle is given with respect to the coil plane.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Relate the coil plane angle ϕ\phi to the normal vector angle θ\theta: θ=90∘−ϕ\theta = 90^\circ - \phi, giving τ=NIABcos⁡ϕ\tau = NIAB \cos\phi.

  2. Substitute the given parameters: 1.85=(120)(2.40)(0.0150)(0.650)cos⁡ϕ=2.808cos⁡ϕ1.85 = (120)(2.40)(0.0150)(0.650)\cos\phi = 2.808\cos\phi.

  3. Isolate the cosine ratio: cos⁡ϕ=1.852.808≈0.6588\cos\phi = \frac{1.85}{2.808} \approx 0.6588.

  4. Compute the acute angle: ϕ=arccos⁡(0.6588)≈48.7∘\phi = \arccos(0.6588) \approx 48.7^\circ.

Final answer

ϕ≈48.7∘\phi \approx 48.7^\circ (or 0.850 rad0.850\text{ rad})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review flashcard 1 to firmly memorize the difference between the coil plane and coil normal.

  • Practice drawing the normal vector explicitly before setting up any torque or magnetic flux equation.

  • Solve the three targeted follow-up problems to master both angle configurations.

Lock it in

Similar question

01

A circular single-turn loop (N=1N = 1) with area A=0.040 m2A = 0.040\text{ m}^2 carries a current of I=3.0 AI = 3.0\text{ A} in a magnetic field B=0.50 TB = 0.50\text{ T}. If the plane of the coil makes an angle of 30∘30^\circ with the magnetic field lines, calculate the magnitude of the torque on the loop.

Answer

τ=0.052 N⋅m\tau = 0.052\text{ N}\cdot\text{m}. Key step: The angle with the plane is ϕ=30∘\phi = 30^\circ, so τ=NIABcos⁡ϕ=(1)(3.0)(0.040)(0.50)cos⁡(30∘)=0.060×32≈0.052 N⋅m\tau = NIAB \cos\phi = (1)(3.0)(0.040)(0.50)\cos(30^\circ) = 0.060 \times \frac{\sqrt{3}}{2} \approx 0.052\text{ N}\cdot\text{m}.

02

A rectangular armature coil of N=80 turnsN = 80\text{ turns}, dimensions 5.0 cm×10.0 cm5.0\text{ cm} \times 10.0\text{ cm}, carries a current of 1.5 A1.5\text{ A} in a uniform magnetic field of 0.40 T0.40\text{ T}. Find the torque when the normal to the coil makes an angle of 60∘60^\circ with the magnetic field.

Answer

τ=0.208 N⋅m\tau = 0.208\text{ N}\cdot\text{m}. Key step: Area A=0.050×0.100=0.0050 m2A = 0.050 \times 0.100 = 0.0050\text{ m}^2. The angle is given directly with the normal, so θ=60∘\theta = 60^\circ. Thus τ=NIABsin⁡(60∘)=(80)(1.5)(0.0050)(0.40)sin⁡(60∘)=0.24×0.866≈0.208 N⋅m\tau = NIAB \sin(60^\circ) = (80)(1.5)(0.0050)(0.40)\sin(60^\circ) = 0.24 \times 0.866 \approx 0.208\text{ N}\cdot\text{m}.

03

A square coil with 200 turns200\text{ turns} and side length 8.0 cm8.0\text{ cm} experiences a torque of 0.35 N⋅m0.35\text{ N}\cdot\text{m} in a 0.55 T0.55\text{ T} magnetic field while carrying a current of 0.80 A0.80\text{ A}. Determine the acute angle between the magnetic field and the plane of the coil.

Answer

ϕ≈60.5∘\phi \approx 60.5^\circ. Key steps: Area A=(0.080 m)2=0.0064 m2A = (0.080\text{ m})^2 = 0.0064\text{ m}^2. Maximum torque τmax⁡=NIAB=(200)(0.80)(0.0064)(0.55)=0.704 N⋅m\tau_{\max} = NIAB = (200)(0.80)(0.0064)(0.55) = 0.704\text{ N}\cdot\text{m}. Since τ=τmax⁡cos⁡ϕ\tau = \tau_{\max} \cos\phi, cos⁡ϕ=0.35/0.704≈0.4972\cos\phi = 0.35 / 0.704 \approx 0.4972, so ϕ=arccos⁡(0.4972)≈60.5∘\phi = \arccos(0.4972) \approx 60.5^\circ.

Loading workspace…