Resources
A horizontal flat mirror lies in the -plane with its reflective surface facing upward toward . A laser beam propagates through the medium along the unit vector toward the mirror. Using the formal vector law of reflection , where is the unit surface normal: (a) find the exact unit vector of the reflected ray, and (b) calculate the angle of reflection relative to the upward surface normal .
Answer and steps
Final answer
(a) ; (b)
Steps
Part (a): Determining the Reflected Unit Vector
- Identify the Surface Normal Vector : The mirror lies flat in the -plane with its reflective side facing the direction. Therefore, the outward unit normal vector pointing away from the mirror surface is:
-
Compute the Scalar Dot Product : The incident ray propagates in the direction of the unit vector:
Taking the dot product with the normal vector :
-
Apply the Vector Law of Reflection: The general vector form of the law of reflection states:
Substitute the values into the formula:
Pitfall Note: The tangential components ( and ) remain unchanged during specular reflection, while the normal component () simply reverses direction from negative to positive.
Part (b): Finding the Angle of Reflection
- Relate the Reflected Ray to the Surface Normal: The angle of reflection is measured between the reflected ray and the upward surface normal . Using the definition of the dot product:
-
Evaluate and Solve for : Since both and are unit vectors ():
Taking the inverse cosine:
Typical errors
01 A student incorrectly adds rather than subtracts the normal projection term in the reflection formula, resulting in an inverted normal component.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You added the normal component term instead of subtracting it. The vector reflection formula requires , which flips the sign of the normal component from negative to positive while preserving unit length.
- Step 3Correct
Your angle calculation method was logically sound, but because was incorrect and not a unit vector, it produced an obtuse angle of instead of the correct acute reflection angle .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the upward surface normal as .
You evaluated the scalar dot product accurately.
You correctly applied the definition of the dot product to solve for the angle between two vectors.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou copied the reflection formula with an addition sign instead of a subtraction sign before .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the sign in the vector reflection formula: because the incident ray points into the surface, is negative, so subtracting produces the necessary positive normal component that directs the reflected ray away from the surface.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check vector law of reflection sign
The vector reflection formula is , with a minus sign.
Always verify that subtracting the normal projection reverses the component perpendicular to the surface.
- Unit vector sanity check
Specular reflection preserves ray speed and direction magnitude, so .
If your resulting reflected vector has a magnitude different from , re-check your formula and signs immediately.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the correct vector reflection formula: .
Substitute and : .
Compute the angle of reflection using : .
(a) ; (b)
02 A student calculates the glancing angle with the horizontal mirror plane instead of the angle relative to the surface normal.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
The problem asks for the angle of reflection relative to the upward normal . The angle relative to the normal is already . Subtracting from calculates the glancing angle with the mirror surface instead.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the surface normal vector as .
You evaluated the dot product without error.
You accurately obtained the reflected unit vector .
You correctly calculated .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou solved for the angle with the normal (), but then subtracted it from , mistaking the glancing angle with the surface for the angle of reflection.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the standard definition of the angle of reflection (measured from the surface normal) with the glancing angle (measured from the mirror surface).
REASONING PATH
Your ACEpath teacher’s suggested approach- Reference Line for Angles in Optics
In geometric optics, the angle of incidence and angle of reflection are always measured from the surface normal , never from the reflecting surface itself.
When you compute , the resulting angle is already the angle of reflection ; do not subtract it from unless specifically asked for the angle with the mirror plane.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify that is defined relative to the normal vector .
Set directly.
03 A student uses a downward-pointing normal vector n̂ = -k̂ opposed to the specified upward normal, which inverts the sign of the normal component.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The problem states that the mirror's reflective surface faces upward toward , so the outward surface normal pointing into the medium of propagation is rather than .
- Step 2
- Step 3Correct
Because you used , you computed the angle with the downward normal into the mirror rather than the upward normal specified in the prompt, producing the supplementary angle .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled and algebraically applied the formal vector law of reflection .
You accurately found the components of the reflected unit vector .
You correctly used the dot product definition to compute the angle from the cosine relation.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou assigned instead of , confusing the direction opposing the incident ray with the outward surface normal.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisThe outward unit normal must always point out of the reflective boundary and into the medium containing the rays. Here, the reflective surface faces , meaning .
REASONING PATH
Your ACEpath teacher’s suggested approach- Outward Normal Definition
The surface normal points away from the reflecting surface into the incident medium.
Always identify the direction the reflective face points before writing down .
- Angle of Reflection Range
The geometric angle of reflection measured from the outward surface normal must satisfy .
If your calculated angle is obtuse (), check whether you inadvertently took the dot product against an inward-pointing normal.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the correct upward unit normal: .
Compute the dot product with the reflected vector: .
Calculate the reflection angle: .
(a) ; (b)
Lock it in
What is the vector form of the law of reflection for an incident ray unit vector reflecting off a surface with unit normal ?
. Subtracting reverses only the normal component while keeping the tangential components unchanged.
Similar question
A light ray propagating along hits a flat horizontal mirror in the -plane with reflective surface facing (normal ). Find the reflected unit vector and the angle of reflection relative to .
Answer
and . Using with , the -component flips from to . Then , giving .
A laser beam with direction vector strikes a vertical mirror lying in the -plane. The reflective surface faces the direction, so the outward unit normal is . Determine the reflected ray unit vector and confirm that .
Answer
. Since , . Applying reverses only the -component. Its magnitude is .
An optical sensor is aligned with an inclined mirror whose unit normal is . A ray arrives with direction . Find the reflected ray vector and compute the angle between the incident ray and the reflected ray .
Answer
and angle . Compute . Applying the vector formula gives . The angle between and is .