Resources

A multi-loop circuit features three parallel branches joining node CC (top) and node DD (bottom). The left branch carries a downward current and contains a resistor R1=5.00 ΩR_1 = 5.00\ \Omega and an unknown DC voltage source E1\mathcal{E}_1 directed upward toward CC. The middle branch contains a resistor R2=10.0 ΩR_2 = 10.0\ \Omega with no source, carrying a downward current of I2=1.20 AI_2 = 1.20\text{ A}. The right branch contains a known battery E2=30.0 V\mathcal{E}_2 = 30.0\text{ V} directed upward toward CC in series with resistor R3=15.0 ΩR_3 = 15.0\ \Omega. Applying Kirchhoff's laws to this circuit snapshot, calculate the electromotive force E1\mathcal{E}_1 of the left-branch battery.

Answer and steps

Final answer

E1=12.0 V\mathcal{E}_1 = 12.0\text{ V}

Steps

01

Determine the potential difference between node CC and node DD

To find the electromotive force E1\mathcal{E}_1, we apply Kirchhoff's Voltage Law (KVL) and Kirchhoff's Current Law (KCL) across the parallel branches connecting node CC (top) and node DD (bottom).

The middle branch contains only the resistor R2=10.0 ΩR_2 = 10.0\ \Omega carrying a downward current of I2=1.20 AI_2 = 1.20\text{ A}.

Since current flows from higher potential to lower potential through a resistor, node CC is at a higher potential than node DD: VC−VD=I2R2=(1.20 A)(10.0 Ω)=12.0 VV_C - V_D = I_2 R_2 = (1.20\text{ A})(10.0\ \Omega) = 12.0\text{ V}

Because all three branches are connected in parallel between nodes CC and DD, the potential difference across every branch must equal 12.0 V12.0\text{ V}.


02

Determine the current in the right branch

Let I3I_3 be the upward current in the right branch directed toward node CC. Moving from node DD to node CC through the right branch: VC−VD=E2−I3R3V_C - V_D = \mathcal{E}_2 - I_3 R_3

Substitute the known values: 12.0 V=30.0 V−I3(15.0 Ω)12.0\text{ V} = 30.0\text{ V} - I_3(15.0\ \Omega) 15.0I3=30.0−12.0=18.015.0 I_3 = 30.0 - 12.0 = 18.0 I3=18.0 V15.0 Ω=1.20 AI_3 = \frac{18.0\text{ V}}{15.0\ \Omega} = 1.20\text{ A}

Thus, an upward current of 1.20 A1.20\text{ A} enters node CC from the right branch.


03

Apply Kirchhoff's Current Law at node CC

Let I1I_1 denote the downward current in the left branch (leaving node CC).

According to Kirchhoff's Current Law, the sum of currents entering a junction equals the sum of currents leaving the junction: ∑Iin=∑Iout\sum I_{\text{in}} = \sum I_{\text{out}} I3=I1+I2I_3 = I_1 + I_2

Substitute the values of I3I_3 and I2I_2: 1.20 A=I1+1.20 A1.20\text{ A} = I_1 + 1.20\text{ A} I1=0 AI_1 = 0\text{ A}

The net current in the left branch is zero.


04

Solve for the electromotive force E1\mathcal{E}_1

Traversing the left branch from node DD to node CC, the potential rises across the source E1\mathcal{E}_1 and changes across the resistor R1R_1: VC−VD=E1−I1R1V_C - V_D = \mathcal{E}_1 - I_1 R_1

Since I1=0 AI_1 = 0\text{ A}: VC−VD=E1−(0 A)(5.00 Ω)=E1V_C - V_D = \mathcal{E}_1 - (0\text{ A})(5.00\ \Omega) = \mathcal{E}_1

Equating this to VC−VD=12.0 VV_C - V_D = 12.0\text{ V}: E1=12.0 V\mathcal{E}_1 = 12.0\text{ V}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misapplies the sign of the potential change across the battery in the branch voltage equation, writing V_C - V_D = Ɛ₁ + I₁ * R₁ instead of Ɛ₁ - I₁ * R₁, or in the right branch writes V_C - V_D = Ɛ₂ + I₃ * R₃, resulting in an incorrect right-branch current of -1.20 A and subsequently Ɛ₁ = 24.0 V.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    VC−VD=I2⋅R2=1.20⋅10.0=12.0 VV_C - V_D = I_2 \cdot R_2 = 1.20 \cdot 10.0 = 12.0\text{ V}

  2. Step 2

    VC−VD=E2+I3⋅R3  ⟹  12.0=30.0+I3⋅15.0  ⟹  I3=−1.20 AV_C - V_D = \mathcal{E}_2 + I_3 \cdot R_3 \implies 12.0 = 30.0 + I_3 \cdot 15.0 \implies I_3 = -1.20\text{ A}

    Correct

    VC−VD=E2−I3R3  ⟹  12.0 V=30.0 V−I3(15.0 Ω)  ⟹  I3=1.20 AV_C - V_D = \mathcal{E}_2 - I_3 R_3 \implies 12.0\text{ V} = 30.0\text{ V} - I_3(15.0\ \Omega) \implies I_3 = 1.20\text{ A}

    When moving from node DD to node CC in the direction of the upward current I3I_3, passing through resistor R3R_3 produces a potential drop, so the term must be −I3R3-I_3 R_3, not +I3R3+I_3 R_3.

  3. Step 3

    I3=I1+I2  ⟹  −1.20=I1+1.20  ⟹  I1=−2.40 AI_3 = I_1 + I_2 \implies -1.20 = I_1 + 1.20 \implies I_1 = -2.40\text{ A}

    Correct

    I3=I1+I2  ⟹  1.20 A=I1+1.20 A  ⟹  I1=0 AI_3 = I_1 + I_2 \implies 1.20\text{ A} = I_1 + 1.20\text{ A} \implies I_1 = 0\text{ A}

    You correctly set up Kirchhoff's Current Law at node CC, but substituting the negative current from Step 2 gave an incorrect value for I1I_1.

  4. Step 4

    VC−VD=E1−I1⋅R1  ⟹  12.0=E1−(−2.40)⋅5.00  ⟹  E1=0.00 VV_C - V_D = \mathcal{E}_1 - I_1 \cdot R_1 \implies 12.0 = \mathcal{E}_1 - (-2.40) \cdot 5.00 \implies \mathcal{E}_1 = 0.00\text{ V}

    Correct

    VC−VD=E1−I1R1  ⟹  12.0 V=E1−(0 A)(5.00 Ω)  ⟹  E1=12.0 VV_C - V_D = \mathcal{E}_1 - I_1 R_1 \implies 12.0\text{ V} = \mathcal{E}_1 - (0\text{ A})(5.00\ \Omega) \implies \mathcal{E}_1 = 12.0\text{ V}

    Your branch equation and algebra were evaluated consistently with your previous values, but the error in I1I_1 propagated here to produce E1=0.00 V\mathcal{E}_1 = 0.00\text{ V} instead of 12.0 V12.0\text{ V}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the branch voltage VC−VD=12.0 VV_C - V_D = 12.0\text{ V} using the passive middle branch.

You correctly formulated Kirchhoff's Current Law at node CC as ∑Iin=∑Iout\sum I_{\text{in}} = \sum I_{\text{out}}.

You tracked negative values consistently through your subsequent algebraic steps.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Branch Voltage Equation

You wrote +I3R3+ I_3 R_3 instead of −I3R3- I_3 R_3 when expressing the potential difference across the right branch.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the sign of the potential change across a resistor when traversing in the direction of the branch current. Traversing with the current always results in a potential drop (−IR-IR).

REASONING PATH
Your ACEpath teacher’s suggested approach
Resistor Potential Drop Convention
  • When traversing a branch in the direction of current II, the potential change across a resistor RR is ΔV=−IR\Delta V = -IR.

  • Always verify whether your traversal path aligns with or opposes the assumed current arrow before assigning the sign to IRIR.

Branch Potential Equation
  • For a path from node AA to node BB, VB−VA=∑ΔV=∑(potential gains)−∑(potential drops)V_B - V_A = \sum \Delta V = \sum (\text{potential gains}) - \sum (\text{potential drops}).

  • Write out each component's potential step explicitly: gain across a battery from negative to positive (+E+\mathcal{E}), drop in current direction (−IR-IR).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the potential traversal from DD to CC along the right branch: VC−VD=E2−I3R3V_C - V_D = \mathcal{E}_2 - I_3 R_3.

  2. Substitute the known values: 12.0 V=30.0 V−I3(15.0 Ω)  ⟹  I3=18.0 V15.0 Ω=1.20 A12.0\text{ V} = 30.0\text{ V} - I_3(15.0\ \Omega) \implies I_3 = \frac{18.0\text{ V}}{15.0\ \Omega} = 1.20\text{ A}.

  3. Apply Kirchhoff's Current Law at node CC: I3=I1+I2  ⟹  1.20 A=I1+1.20 A  ⟹  I1=0 AI_3 = I_1 + I_2 \implies 1.20\text{ A} = I_1 + 1.20\text{ A} \implies I_1 = 0\text{ A}.

  4. Substitute I1=0 AI_1 = 0\text{ A} into the left branch equation: VC−VD=E1−I1R1  ⟹  12.0 V=E1−0V_C - V_D = \mathcal{E}_1 - I_1 R_1 \implies 12.0\text{ V} = \mathcal{E}_1 - 0.

Final answer

E1=12.0 V\mathcal{E}_1 = 12.0\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the sign conventions for traversing resistors and EMF sources in Kirchhoff's Voltage Law.

  • Work through the targeted flashcards on branch potential differences.

  • Solve the three follow-up circuit exercises to solidify your branch-traversal method.

OverviewACEpath Teacher's Diagnosis

02 The student assumes all branch currents flow downward away from node C, writing the junction rule as I₁ + I₂ + I₃ = 0, which yields I₁ = -2.40 A and leads to Ɛ₁ = 0.00 V (or with I₃ = 1.20 A downward, I₁ = -2.40 A).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    VC−VD=I2∗R2=1.20∗10.0=12.0 V  ⟹  VC−VD=E2−I3∗R3  ⟹  12.0=30.0−I3∗15.0  ⟹  I3=1.20 AV_C - V_D = I_2 * R_2 = 1.20 * 10.0 = 12.0\text{ V} \implies V_C - V_D = \mathcal{E}_2 - I_3 * R_3 \implies 12.0 = 30.0 - I_3 * 15.0 \implies I_3 = 1.20\text{ A}

  2. Step 2

    I1+I2+I3=0  ⟹  I1+1.20+1.20=0  ⟹  I1=−2.40 AI_1 + I_2 + I_3 = 0 \implies I_1 + 1.20 + 1.20 = 0 \implies I_1 = -2.40\text{ A}

    Correct

    ∑Iin=∑Iout  ⟹  I3=I1+I2  ⟹  1.20 A=I1+1.20 A  ⟹  I1=0 A\sum I_{\text{in}} = \sum I_{\text{out}} \implies I_3 = I_1 + I_2 \implies 1.20\text{ A} = I_1 + 1.20\text{ A} \implies I_1 = 0\text{ A}

    In your previous step, writing VC−VD=E2−I3R3V_C - V_D = \mathcal{E}_2 - I_3 R_3 defined I3I_3 as directed upward toward node CC. When applying Kirchhoff's Current Law at node CC, I3I_3 enters the junction while I2I_2 leaves it, so the junction rule requires Iin=IoutI_{\text{in}} = I_{\text{out}} (I3=I1+I2I_3 = I_1 + I_2), rather than treating all currents as leaving the junction.

  3. Step 3

    VC−VD=E1−I1∗R1  ⟹  12.0=E1−(−2.40)∗5.00  ⟹  E1=0.00 VV_C - V_D = \mathcal{E}_1 - I_1 * R_1 \implies 12.0 = \mathcal{E}_1 - (-2.40) * 5.00 \implies \mathcal{E}_1 = 0.00\text{ V}

    Correct

    VC−VD=E1−I1R1  ⟹  12.0 V=E1−(0 A)(5.00 Ω)  ⟹  E1=12.0 VV_C - V_D = \mathcal{E}_1 - I_1 R_1 \implies 12.0\text{ V} = \mathcal{E}_1 - (0\text{ A})(5.00\ \Omega) \implies \mathcal{E}_1 = 12.0\text{ V}

    You used the correct loop equation relating potential difference, battery EMF, and resistor drop across the left branch, but substituting the incorrect value I1=−2.40 AI_1 = -2.40\text{ A} led to an erroneous value for E1\mathcal{E}_1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the middle branch to determine the potential difference VC−VD=12.0 VV_C - V_D = 12.0\text{ V}.

You correctly related the potential difference across the right branch to find the magnitude of the right-branch current I3=1.20 AI_3 = 1.20\text{ A}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Current direction mismatch in Kirchhoff's junction rule

You summed all currents to zero as if they all pointed away from node CC, ignoring the fact that your branch equation already defined I3I_3 as entering node CC.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Failing to maintain a consistent reference direction for branch currents between loop potential equations and junction equations.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Direction Consistency
  • Every branch current IkI_k must have a single assigned arrow direction that is obeyed consistently in both loop equations and junction equations.

  • Draw an arrow for each branch current on the circuit diagram before writing equations, and ensure that a current entering a node is written on the entering side of ∑Iin=∑Iout\sum I_{\text{in}} = \sum I_{\text{out}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify entering and leaving currents at node CC: I3I_3 enters node CC from the right branch, while I2I_2 leaves downward through the middle branch and I1I_1 leaves downward through the left branch.

  2. Write the junction rule: ∑Iin=∑Iout  ⟹  I3=I1+I2\sum I_{\text{in}} = \sum I_{\text{out}} \implies I_3 = I_1 + I_2.

  3. Substitute known values: 1.20 A=I1+1.20 A  ⟹  I1=0 A1.20\text{ A} = I_1 + 1.20\text{ A} \implies I_1 = 0\text{ A}.

  4. Traverse the left branch from node DD to node CC: VC−VD=E1−I1R1V_C - V_D = \mathcal{E}_1 - I_1 R_1.

  5. Substitute VC−VD=12.0 VV_C - V_D = 12.0\text{ V} and I1=0 AI_1 = 0\text{ A}: 12.0 V=E1−(0)(5.00 Ω)  ⟹  E1=12.0 V12.0\text{ V} = \mathcal{E}_1 - (0)(5.00\ \Omega) \implies \mathcal{E}_1 = 12.0\text{ V}.

Final answer

E1=12.0 V\mathcal{E}_1 = 12.0\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Annotate each circuit branch with an explicit arrow for current direction before solving.

  • Verify that entering currents and leaving currents are placed on opposite sides of the junction equation.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the node voltage V_C - V_D directly with the battery electromotive force Ɛ₁ without accounting for the potential difference across the branch resistor R₁ when calculating Ɛ₁.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    VC−VD=I2∗R2=1.20∗10.0=12.0 V  ⟹  VC−VD=E2−I3∗R3  ⟹  12.0=30.0−I3∗15.0  ⟹  I3=1.20 AV_C - V_D = I_2 * R_2 = 1.20 * 10.0 = 12.0\text{ V} \implies V_C - V_D = \mathcal{E}_2 - I_3 * R_3 \implies 12.0 = 30.0 - I_3 * 15.0 \implies I_3 = 1.20\text{ A}

  2. Step 2

    I3=I1+I2  ⟹  1.20=I1+1.20  ⟹  I1=0.00 AI_3 = I_1 + I_2 \implies 1.20 = I_1 + 1.20 \implies I_1 = 0.00\text{ A}

  3. Step 3

    E1=VC−VD−I1∗R1  ⟹  E1=12.0−5.00  ⟹  E1=7.00 V\mathcal{E}_1 = V_C - V_D - I_1 * R_1 \implies \mathcal{E}_1 = 12.0 - 5.00 \implies \mathcal{E}_1 = 7.00\text{ V}

    Correct

    E1=VC−VD=12.0 V\mathcal{E}_1 = V_C - V_D = 12.0\text{ V} (since I1R1=(0.00 A)(5.00 Ω)=0 VI_1 R_1 = (0.00\text{ A})(5.00\ \Omega) = 0\text{ V})

    You substituted the resistance value R1=5.00 ΩR_1 = 5.00\ \Omega directly as a voltage drop instead of multiplying it by the branch current I1=0.00 AI_1 = 0.00\text{ A}. Since I1=0 AI_1 = 0\text{ A}, the voltage drop across the resistor is zero, giving E1=12.0 V\mathcal{E}_1 = 12.0\text{ V}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the parallel node voltage VC−VDV_C - V_D across the middle branch.

You correctly set up and solved the right branch equation to find I3=1.20 AI_3 = 1.20\text{ A}.

You correctly applied Kirchhoff's Current Law at node CC to find I1=0.00 AI_1 = 0.00\text{ A}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ohm's Law Drop Substitution Error

You substituted the resistance value R1=5.00R_1 = 5.00 directly into your voltage equation instead of multiplying it by I1=0.00 AI_1 = 0.00\text{ A}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing resistance (RR) with potential drop (IRI R) when evaluating branch voltage equations, leading to subtracting ohms directly from volts rather than accounting for zero current.

REASONING PATH
Your ACEpath teacher’s suggested approach
Voltage drop across a zero-current resistor
  • By Ohm's law, the potential difference across any linear resistor is ΔV=IR\Delta V = I R. When I=0I = 0, ΔV=0 V\Delta V = 0\text{ V} regardless of the resistance RR.

  • Always evaluate the product I⋅RI \cdot R with its numerical values before adding or subtracting voltages.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute I1=0.00 AI_1 = 0.00\text{ A} and R1=5.00 ΩR_1 = 5.00\ \Omega into the product I1R1I_1 R_1: I1R1=(0.00 A)(5.00 Ω)=0 VI_1 R_1 = (0.00\text{ A})(5.00\ \Omega) = 0\text{ V}.

  2. Relate the branch emf to the node voltage: VC−VD=E1−I1R1=E1−0 V=E1V_C - V_D = \mathcal{E}_1 - I_1 R_1 = \mathcal{E}_1 - 0\text{ V} = \mathcal{E}_1.

  3. Equate to VC−VD=12.0 VV_C - V_D = 12.0\text{ V} to obtain E1=12.0 V\mathcal{E}_1 = 12.0\text{ V}.

Final answer

E1=12.0 V\mathcal{E}_1 = 12.0\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Check units when writing voltage balance equations: ensure every term being added or subtracted is in volts (V\text{V}), not ohms (Ω\Omega).

  • When a branch current is zero, mentally or explicitly replace the resistor with an ideal short (0 V0\text{ V} drop) to verify your result.

Lock it in

Similar question

01

A single branch connects node XX to node YY. The branch contains an internal DC source E=24.0 V\mathcal{E} = 24.0\text{ V} oriented toward YY, in series with a resistor R=6.00 ΩR = 6.00\ \Omega. If the potential difference is VY−VX=9.00 VV_Y - V_X = 9.00\text{ V}, determine the magnitude and direction of the current flowing through this branch.

Answer

I=2.50 AI = 2.50\text{ A} directed toward YY.

Key steps:

  1. Traversing from XX to YY with current II toward YY: VY−VX=E−IRV_Y - V_X = \mathcal{E} - IR.
  2. Substitute values: 9.00 V=24.0 V−I(6.00 Ω)9.00\text{ V} = 24.0\text{ V} - I(6.00\ \Omega).
  3. 6.00I=15.0 V  ⟹  I=2.50 A6.00 I = 15.0\text{ V} \implies I = 2.50\text{ A} (positive sign confirms direction toward YY).
02

Two nodes, PP (top) and QQ (bottom), are joined by three parallel branches. The left branch has resistor R1=8.00 ΩR_1 = 8.00\ \Omega carrying a downward current of 1.50 A1.50\text{ A}. The middle branch contains a battery Em=18.0 V\mathcal{E}_m = 18.0\text{ V} directed upward in series with resistor Rm=4.00 ΩR_m = 4.00\ \Omega. Calculate the upward current ImI_m flowing through the middle branch toward node PP.

Answer

Im=1.50 AI_m = 1.50\text{ A}.

Key steps:

  1. Find node potential difference from left branch: VP−VQ=I1R1=(1.50 A)(8.00 Ω)=12.0 VV_P - V_Q = I_1 R_1 = (1.50\text{ A})(8.00\ \Omega) = 12.0\text{ V}.
  2. Write the middle branch equation traversing from QQ to PP: VP−VQ=Em−ImRmV_P - V_Q = \mathcal{E}_m - I_m R_m.
  3. Substitute values: 12.0 V=18.0 V−Im(4.00 Ω)12.0\text{ V} = 18.0\text{ V} - I_m(4.00\ \Omega).
  4. 4.00Im=6.00 V  ⟹  Im=1.50 A4.00 I_m = 6.00\text{ V} \implies I_m = 1.50\text{ A} upward.
03

In a two-node circuit connecting node AA (top) and node BB (bottom), the central branch has a resistor Rc=6.0 ΩR_c = 6.0\ \Omega carrying 2.0 A2.0\text{ A} downward. The right branch has a battery E2=28.0 V\mathcal{E}_2 = 28.0\text{ V} directed upward in series with R2=8.0 ΩR_2 = 8.0\ \Omega. The left branch contains an unknown battery E1\mathcal{E}_1 directed upward in series with R1=4.0 ΩR_1 = 4.0\ \Omega, carrying an upward current into node AA. Find the current in the left branch and the value of E1\mathcal{E}_1.

Answer

I1=0 AI_1 = 0\text{ A} and E1=12.0 V\mathcal{E}_1 = 12.0\text{ V}.

Key steps:

  1. Potential across nodes: VA−VB=IcRc=(2.0 A)(6.0 Ω)=12.0 VV_A - V_B = I_c R_c = (2.0\text{ A})(6.0\ \Omega) = 12.0\text{ V}.
  2. Right branch current I2I_2 toward AA: VA−VB=E2−I2R2  ⟹  12.0=28.0−8.0I2  ⟹  I2=2.0 AV_A - V_B = \mathcal{E}_2 - I_2 R_2 \implies 12.0 = 28.0 - 8.0 I_2 \implies I_2 = 2.0\text{ A}.
  3. Kirchhoff's Current Law at node AA: I1+I2=Ic  ⟹  I1+2.0 A=2.0 A  ⟹  I1=0 AI_1 + I_2 = I_c \implies I_1 + 2.0\text{ A} = 2.0\text{ A} \implies I_1 = 0\text{ A}.
  4. Left branch equation: VA−VB=E1−I1R1  ⟹  12.0 V=E1−(0)(4.0 Ω)  ⟹  E1=12.0 VV_A - V_B = \mathcal{E}_1 - I_1 R_1 \implies 12.0\text{ V} = \mathcal{E}_1 - (0)(4.0\ \Omega) \implies \mathcal{E}_1 = 12.0\text{ V}.
Loading workspace…