Resources
In a laboratory experiment to determine the molar mass of a volatile liquid via the Dumas method, a student vaporizes an excess liquid sample inside an open Florence flask immersed in a boiling water bath at . The ambient barometric pressure in the laboratory is recorded as (). After the excess vapor vents and the vapor inside reaches equilibrium with the atmospheric pressure and bath temperature, the flask is sealed, cooled to room temperature, and reweighed. The condensed liquid inside has a mass of . Treating the hot vapor as an ideal gas at the moment of sealing, calculate the molar mass of the compound in . Use .
Answer and steps
Final answer
Steps
Convert all measured values to standard gas units
To determine the molar mass () of the volatile liquid, we use the Ideal Gas Law to relate the pressure, volume, temperature, and mass of the vapor trapped in the flask at the moment of sealing.
- Pressure ():
- Volume ():
- Absolute Temperature ():
- Mass ():
Express molar mass using the Ideal Gas Law
The Ideal Gas Law is given by:
Since the number of moles is , where is the mass and is the molar mass:
Rearranging to solve for the molar mass :
Calculate the number of moles () and molar mass ()
First, find the moles of vapor occupying the flask:
Now, calculate the molar mass:
(Common Pitfall: Ensure the temperature is always converted to kelvins () rather than using degrees Celsius (), and that the flask's volume is converted to liters () to match the units of the gas constant .)
Typical errors
01 The student forgets to convert the boiling water bath temperature from Celsius to Kelvin, using 99.2 directly in the ideal gas equation.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You substituted the bath temperature as instead of converting to absolute temperature in kelvins (). The gas constant requires temperature in for its units to cancel.
- Step 4Correct
Your arithmetic evaluation was consistent with the numbers you entered, but the value is incorrect due to the temperature unit error in the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the need to convert volume from to and barometric pressure from to .
You algebraically rearranged the Ideal Gas Law into the molar mass expression without any error.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou used the Celsius temperature directly into the ideal gas formula without converting it to kelvins (). Because the universal gas constant includes units of , gas equations only hold for absolute temperature.
REASONING PATH
Your ACEpath teacher’s suggested approach- Absolute Temperature Requirement
Whenever using gas laws (, Charles's law, Graham's law, etc.), temperature must always be expressed in kelvins: .
Check the units of to verify that every quantity (, , ) matches the units in the constant before calculating.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the bath temperature to kelvins: .
Substitute the correct values into the rearranged formula: .
Calculate the numerator and denominator: .
02 The student substitutes the volume in milliliters directly into the formula without converting it to liters, yielding a molar mass three orders of magnitude too small.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You plugged in the flask volume as instead of converting it to liters (). Because the gas constant uses units of , the volume must be in liters.
- Step 4Correct
Your arithmetic followed your substituted numbers correctly, but the resulting value is off by a factor of due to the uncoverted volume unit.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the experimental temperature from Celsius to kelvins.
You accurately converted the ambient pressure from millimeters of mercury to atmospheres.
You derived the correct algebraic formula relating molar mass to the Ideal Gas Law.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou overlooked matching the volume units of the experimental measurement () to the volume unit embedded in the ideal gas constant ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Gas Constant Unit Audit
The ideal gas constant defines the required units: liters (), atmospheres (), and kelvins ().
Always write out the units alongside each variable before substituting, and convert milliliters to liters by dividing by .
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the volume to liters: .
Substitute all variables with consistent units into the molar mass formula: .
Evaluate the expression: .
03 The student inverts the pressure conversion factor by multiplying the barometric pressure by 760 instead of dividing, resulting in an erroneously large pressure and tiny molar mass.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
,
- Step 2Correct
To convert pressure from to , you need to divide by the conversion factor rather than multiply.
- Step 3Correct
Your algebraic derivation for molar mass from the Ideal Gas Law is completely correct, but the substituted pressure carried over your unit conversion error.
- Step 4Correct
Your arithmetic evaluation was consistent with your earlier numbers, but the final molar mass is incorrect due to the inverted pressure conversion.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the flask volume from milliliters to liters.
You converted Celsius to kelvins using the proper offset of .
You correctly rearranged the Ideal Gas Law to express molar mass as .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set up the operation as multiplication by instead of division, leading to instead of approximately .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou applied the numerical conversion factor without setting up dimensional analysis units to ensure that cancels out and leaves .
REASONING PATH
Your ACEpath teacher’s suggested approach- Dimensional Analysis Check
Write conversion factors as fractions with the starting unit in the opposite position (numerator vs. denominator) so the unwanted unit cancels: .
Always write down the explicit unit fraction and cross out the matching units before computing.
- Physical Reasonability Check
Ambient atmospheric pressure at sea level is close to ().
Check whether your converted pressure is reasonably close to ; a value of hundreds of thousands of atmospheres indicates an inverted conversion.
CORRECTED PATH
ACEpath Teacher's DemonstrationLock it in
Why must temperature always be converted to kelvins when using the Ideal Gas Law ()?
The ideal gas equation relies on an absolute scale where thermal energy is proportional to temperature, and the constant contains units of . Using Celsius would imply zero volume or pressure at .
Similar question
A sample of an unknown gas occupies at and . Using , calculate the molar mass of the gas.
Answer
. Key steps: Convert and . Moles . Then .
In a Dumas bulb experiment, a volatile liquid vapor occupies a flask at a barometric pressure of in a boiling water bath at . The mass of the condensed vapor is . Determine the molar mass of the substance. (, ).
Answer
. Key steps: , , . Molar mass .
A student measures the molar mass of an organic liquid using the Dumas method. The actual molar mass is , and the bath temperature is . If the student mistakenly substitutes instead of converting to kelvins, by what percentage will their calculated molar mass be underestimated?
Answer
. Key steps: Since , the calculated molar mass is directly proportional to the substituted temperature value . The ratio of the erroneous calculated value to the true value is ( of the true value). The percentage underestimate is .