Resources
A student attempts to slide a heavy trunk of mass across a rough horizontal concrete floor by pushing downward and forward along a handle oriented at an angle below the horizontal. The static friction coefficient is , and . (a) Determine the threshold magnitude of applied force required to initiate sliding. (b) Explain why an applied pushing angle makes sliding mathematically and physically impossible regardless of how large the applied force is.
Answer and steps
Final answer
(a) ; (b) Because the normal force increases linearly with , the maximum static friction grows faster with than the forward driving component whenever , creating a frictional self-locking condition.
Steps
Part (a): Finding the Threshold Applied Force
-
Identify the forces acting on the trunk:
- Downward gravitational force:
- Upward normal force from the floor:
- Applied pushing force directed at an angle below the horizontal:
- Forward horizontal component:
- Downward vertical component:
- Static friction force opposing motion:
- Apply equilibrium in the vertical direction: Since there is no vertical acceleration, the upward and downward forces balance: Common Pitfall: Forgetting that pushing downward increases the normal force beyond the trunk's weight, which simultaneously increases the maximum static friction force.
- Establish the threshold condition for impending motion: The trunk begins to slide when the forward driving force equals the maximum static friction: Substitute the expression for :
- Solve for the force :
-
Substitute the given numerical values:
Part (b): Physical and Mathematical Explanation of the Locking Angle
- Mathematical condition: From the equation derived in Part (a): As increases, decreases while increases. The denominator approaches zero when: For : For any angle , the denominator is zero or negative (), meaning no finite positive applied force can satisfy the equilibrium equation.
-
Physical mechanism (Frictional Self-Locking):
- Every additional newton of applied force produces two competing effects:
- It adds a forward driving component:
- It adds a downward component that increases the normal force, thereby increasing the maximum opposing static friction:
- When , we have . This means the opposing friction increases faster than, or at the exact same rate as, the forward push for any increase in .
- Consequently, pushing harder simply jams the trunk more firmly into the ground rather than helping it move, making sliding physically impossible.
- Every additional newton of applied force produces two competing effects:
Typical errors
01 The student ignores the downward vertical component of the pushing force and assumes the normal force is simply N = mg, underestimating the required force.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You set the normal force equal to the gravitational weight alone. Because you are pushing downward at an angle of below the horizontal, the applied force also exerts a downward vertical component , increasing the floor's normal force.
- Step 2Correct
Your subsequent calculation correctly set the horizontal component equal to static friction, but because was underestimated, your resulting threshold force is too small.
- Step 3
, denominator for , and friction grows faster than driving force.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly derived and applied the self-locking equation in part (b).
You clearly explained the physical mechanism of friction growing faster than the forward driving force.
You correctly calculated the trunk's weight as .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated as a constant in part (a), even though your explanation in part (b) shows you understand that adds to the normal force.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisTreating the vertical equilibrium independently with before setting up the horizontal friction equation, rather than writing a coupled system of equations where depends directly on .
REASONING PATH
Your ACEpath teacher’s suggested approach- Vertical Equilibrium Check
For any contact surface, always write including all applied angled forces before calculating friction: .
Draw a free-body diagram and resolve into and right at the start.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the vertical equilibrium condition: .
Set the horizontal driving force equal to maximum static friction: .
Rearrange terms containing : .
Substitute numerical values: .
(a) ; (b) The denominator when , causing frictional self-locking.
02 The student treats the pushing force as lifting the trunk upward by subtracting F sin θ from the normal force, confusing pushing downward with pulling upward.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because the handle is pushed downward and forward at an angle below the horizontal, the vertical component acts downward on the trunk. Balancing vertical forces gives , not .
- Step 2Correct
Your algebraic rearrangement and arithmetic are consistent with your equation from Step 1, but the sign error carries through and produces an underestimated threshold force.
- Step 3
when , , so the required force diverges to infinity. Increasing the pushing force increases normal force and friction by , which exceeds the forward component .
WHAT YOU DID WELL
Compliments from Your TeacherYou set up horizontal threshold equilibrium correctly using .
You clearly articulated both the mathematical breakdown and the physical self-locking mechanism in Part (b).
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou subtracted the vertical component of the applied force in your normal force equation instead of adding it.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing a downward push with an upward pull when resolving vertical force components, forgetting that pushing into a surface presses the object harder against the ground and increases the normal force.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check the Direction of Applied Vertical Force
For a downward push at angle below horizontal, points downward: .
Draw a clear free-body diagram showing arrow heads pointing away from or toward the body along their true physical axes before writing equilibrium equations.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the vertical force balance: .
Substitute into the horizontal threshold condition: .
Isolate : .
Substitute numerical values: .
(a) ; (b) Sliding is impossible because for , , meaning additional applied force generates equal or greater resisting friction than forward drive.
03 The student interchanges sine and cosine for the horizontal and vertical force components when resolving the angle below the horizontal.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because the pushing angle is measured below the horizontal, the horizontal component is adjacent to the angle () and the vertical downward component is opposite (). You swapped the trigonometric functions.
- Step 2Correct
Your algebraic rearrangement and substitution are mathematically sound. Because , you obtained the correct numerical threshold , but the formula inherited the swapped components from Step 1.
- Step 3Correct
Because the trigonometric functions were interchanged in your general formula, dividing by yielded instead of the correct self-locking threshold .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the downward push increases the normal force above the object's weight.
You correctly set the driving force equal to maximum static friction at the threshold of motion.
You accurately manipulated the linear equation to isolate the applied force .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou associated the horizontal direction with sine and the vertical direction with cosine instead of using basic right-triangle definitions where the side adjacent to the specified angle takes cosine.
REASONING PATH
Your ACEpath teacher’s suggested approach- Vector Component Rule
For an angle measured relative to the horizontal, the horizontal component is adjacent () and the vertical component is opposite ().
Always sketch a right triangle with the force vector as the hypotenuse, identify which side is adjacent to the given angle, and assign cosine to that side.
CORRECTED PATH
ACEpath Teacher's Demonstrationand (directed downward).
Vertical equilibrium gives .
Horizontal impending slip condition: .
Isolate : .
For Part (b), sliding requires , which is impossible when the denominator satisfies , or .
(a) ; (b) Since , static friction grows with at rate , which meets or exceeds the forward rate whenever .
Lock it in
When a pushing force is directed at an angle below the horizontal onto an object of mass on a flat floor, what is the normal force ?
. Pushing downward adds to gravity, which increases both the normal force and the maximum static friction.
Similar question
A box rests on a horizontal floor with . You pull upward on a rope at an angle of above the horizontal. Find the minimum pulling force required to initiate sliding. ()
Answer
. Vertical equilibrium gives . Setting yields .
A lawnmower of mass is pushed across dry grass with by pushing along a handle angled at below the horizontal. What pushing force is required to overcome static friction? (, , )
Answer
. Vertical equilibrium gives . At the threshold of motion, . Solving for : .
For a block resting on a horizontal floor with static friction coefficient , what is the critical angle below the horizontal such that pushing downward at or beyond this angle can never move the block, regardless of force magnitude?
Answer
. Motion becomes impossible when the forward force cannot exceed the additional friction: . Therefore, .