Resources

A stunt motorcyclist rides on the inside of a vertical cylinder (the "Wall of Death") of radius R=6.20 mR = 6.20\text{ m}. The coefficient of static friction between the tires and the vertical wall is μs=0.550\mu_s = 0.550. What is the minimum threshold speed vmin⁡v_{\min} the motorcyclist must maintain so that the motorcycle does not slip downward along the wall? Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer and steps

Final answer

vmin⁡=10.5 m/sv_{\min} = 10.5\text{ m/s}

Steps

01

Identify the Forces Acting on the System

Consider the motorcyclist and motorcycle as a single object of mass mm moving in a horizontal circle of radius RR inside a vertical cylinder.

Two perpendicular directions determine the motion:

  • Vertical direction: The downward force of gravity Fg=mgF_g = mg tends to make the motorcycle slip down the wall. The vertical upward force preventing this slip is the static friction force fsf_s.
  • Horizontal (radial) direction: The vertical wall pushes horizontally inward toward the center of the cylinder, providing the normal force NN.
02

Formulate the Equations of Motion

To prevent downward slipping, the motorcyclist must be in vertical equilibrium: fs=mgf_s = mg

The static friction force is bounded by its maximum possible value: fs≤fs,max⁡=μsNf_s \le f_{s,\max} = \mu_s N

Substituting fs=mgf_s = mg into the inequality gives: mg≤μsN  ⟹  N≥mgμsmg \le \mu_s N \implies N \ge \frac{mg}{\mu_s}

In the horizontal direction, the normal force NN provides the necessary centripetal force to keep the rider moving in a circle of radius RR at speed vv: N=mv2RN = \frac{m v^2}{R}

03

Solve for the Minimum Speed vmin⁡v_{\min}

Substitute the expression for NN into the inequality: mv2R≥mgμs\frac{m v^2}{R} \ge \frac{mg}{\mu_s}

Divide both sides by mm and solve for vv: v2≥gRμs  ⟹  v≥gRμsv^2 \ge \frac{g R}{\mu_s} \implies v \ge \sqrt{\frac{g R}{\mu_s}}

The minimum threshold speed is therefore: vmin⁡=gRμsv_{\min} = \sqrt{\frac{g R}{\mu_s}}

Common Pitfall: In typical horizontal surface problems, the normal force balances gravity (N=mgN = mg) and friction provides the centripetal force. On a vertical wall, these roles are reversed: the normal force acts radially inward to supply centripetal acceleration, while friction acts vertically upward to balance gravity. Notice also that the mass mm cancels out, meaning the minimum required speed does not depend on the weight of the rider or motorcycle.

04

Substitute the Numerical Values

Given:

  • R=6.20 mR = 6.20\text{ m}
  • μs=0.550\mu_s = 0.550
  • g=9.80 m/s2g = 9.80\text{ m/s}^2

vmin⁡=9.80⋅6.200.550=60.760.550≈110.47≈10.5 m/sv_{\min} = \sqrt{\frac{9.80 \cdot 6.20}{0.550}} = \sqrt{\frac{60.76}{0.550}} \approx \sqrt{110.47} \approx 10.5\text{ m/s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the roles of friction and normal force in circular motion on a vertical wall by setting friction equal to the centripetal force and normal force equal to mg, resulting in v_min = √(μs * g * R) ≈ 5.78 m/s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    N=mgN = mg, f=m⋅v2Rf = \frac{m \cdot v^2}{R}

    Correct

    N=mv2RN = \frac{m v^2}{R}, fs=mgf_s = mg

    Because the wall is vertical, the normal force acts horizontally toward the center of the circle to provide the centripetal acceleration (N=mv2RN = \frac{mv^2}{R}), while the upward friction force balances gravity vertically to prevent slipping (fs=mgf_s = mg).

  2. Step 2

    f≤μs⋅N  ⟹  m⋅v2R≤μs⋅mgf \le \mu_s \cdot N \implies \frac{m \cdot v^2}{R} \le \mu_s \cdot mg

    Correct

    fs≤μsN  ⟹  mg≤μs(mv2R)f_s \le \mu_s N \implies mg \le \mu_s \left(\frac{m v^2}{R}\right)

    You substituted your equations into the static friction inequality correctly, but the expression was inverted due to the swapped force definitions in Step 1.

  3. Step 3

    v2≤μs⋅g⋅R  ⟹  vmin⁡=μs⋅g⋅R=0.550⋅9.80⋅6.20≈5.78 m/sv^2 \le \mu_s \cdot g \cdot R \implies v_{\min} = \sqrt{\mu_s \cdot g \cdot R} = \sqrt{0.550 \cdot 9.80 \cdot 6.20} \approx 5.78\text{ m/s}

    Correct

    v≥gRμs  ⟹  vmin⁡=9.80⋅6.200.550≈10.5 m/sv \ge \sqrt{\frac{g R}{\mu_s}} \implies v_{\min} = \sqrt{\frac{9.80 \cdot 6.20}{0.550}} \approx 10.5\text{ m/s}

    You carried out the algebra and arithmetic cleanly from your inequality, but your resulting minimum speed is incorrect because it stems from the swapped forces.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the inequality for static friction: fs≤μsNf_s \le \mu_s N.

You recognized that centripetal acceleration is ac=v2Ra_c = \frac{v^2}{R} and correctly divided out the mass mm.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed normal and frictional force components

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You applied standard flat-track circular motion equations (where friction provides the centripetal force and the normal force counters gravity) instead of orienting the contact forces relative to a vertical surface.

REASONING PATH
Your ACEpath teacher’s suggested approach
Orientation of the Normal Force
  • The normal force NN is always perpendicular to the contact surface.

  • Since the wall is vertical, draw NN horizontally inward pointing toward the cylinder's center.

Orientation of Friction
  • Friction acts parallel to the contact surface opposing relative slipping motion.

  • Since gravity pulls downward along the vertical wall, static friction fsf_s must point straight up to keep the motorcycle in vertical equilibrium: fs=mgf_s = mg.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. For a vertical wall, the normal force points inward along the radius: N=mv2RN = \frac{m v^2}{R}.

  2. Vertical equilibrium to prevent downward slipping requires: fs=mgf_s = mg.

  3. Apply the static friction condition fs≤μsNf_s \le \mu_s N: mg≤μs(mv2R)mg \le \mu_s \left(\frac{m v^2}{R}\right).

  4. Divide by mm and solve for vv: v2≥gRμs  ⟹  v≥gRμsv^2 \ge \frac{g R}{\mu_s} \implies v \ge \sqrt{\frac{g R}{\mu_s}}.

Final answer

vmin⁡=9.80⋅6.200.550≈10.5 m/sv_{\min} = \sqrt{\frac{9.80 \cdot 6.20}{0.550}} \approx 10.5\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch a free-body diagram and identify the orientation of the surface before setting up force equations.

  • Remember that the normal force must point perpendicular to the surface (horizontal for a vertical wall), not always upward.

OverviewACEpath Teacher's Diagnosis

02 The student misplaces the coefficient of static friction in the numerator instead of the denominator when solving the friction inequality, arriving at v = √(μs / (g * R)) ≈ 0.095 m/s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    fs=mgf_s = mg ⟹ N=m⋅v2RN = \frac{m \cdot v^2}{R} ⟹ fs≤μs⋅Nf_s \le \mu_s \cdot N ⟹ mg≤μs⋅(m⋅v2R)mg \le \mu_s \cdot \left(\frac{m \cdot v^2}{R}\right)

  2. Step 2

    v2=μsg⋅Rv^2 = \frac{\mu_s}{g \cdot R}

    Correct

    v2≥gRμsv^2 \ge \frac{g R}{\mu_s}

    When isolating v2v^2 from mg≤μsmv2Rmg \le \frac{\mu_s m v^2}{R}, you multiply both sides by RR and divide by μsm\mu_s m, which yields v2≥gRμsv^2 \ge \frac{g R}{\mu_s}. Inverting the expression also violates dimensional analysis, since μsgR\frac{\mu_s}{g R} has units of s2/m2\text{s}^2/\text{m}^2 instead of m2/s2\text{m}^2/\text{s}^2.

  3. Step 3

    vmin⁡=0.5509.80⋅6.20=0.55060.76≈0.095 m/sv_{\min} = \sqrt{\frac{0.550}{9.80 \cdot 6.20}} = \sqrt{\frac{0.550}{60.76}} \approx 0.095\text{ m/s}

    Correct

    vmin⁡=9.80⋅6.200.550≈10.5 m/sv_{\min} = \sqrt{\frac{9.80 \cdot 6.20}{0.550}} \approx 10.5\text{ m/s}

    You substituted the values correctly into your derived equation, but the numerical answer is carried over from the inversion error in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that static friction balances gravity along the vertical axis.

You correctly used the normal force as the inward centripetal force.

You accurately substituted the given numerical values into your algebraic formula.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic inversion when isolating a variable

You accidentally inverted the ratio to μsgR\frac{\mu_s}{g R} instead of gRμs\frac{g R}{\mu_s} when rearranging g≤μsv2Rg \le \frac{\mu_s v^2}{R}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Losing track of inverse operations during symbolic manipulation, compounded by not performing a quick unit check ([v2]=m2/s2[v^2] = \text{m}^2/\text{s}^2 vs. [μs/(gR)]=s2/m2[\mu_s / (gR)] = \text{s}^2/\text{m}^2) or reality check (a speed of 0.095 m/s0.095\text{ m/s} is far too slow to keep a motorcycle pinned to a vertical wall).

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate terms systematically
  • If A=B⋅CDA = B \cdot \frac{C}{D}, then C=A⋅DBC = \frac{A \cdot D}{B}.

  • Multiply both sides by the denominator RR first, then divide by the coefficient μs\mu_s.

Verify dimensions of the result
  • Speed squared must have dimensions of length2/time2\text{length}^2 / \text{time}^2.

  • Check that [gR/μs]=(m/s2)(m)=m2/s2[g R / \mu_s] = (\text{m}/\text{s}^2)(\text{m}) = \text{m}^2/\text{s}^2 before taking the square root.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide both sides by mm: g≤μsv2Rg \le \frac{\mu_s v^2}{R}

  2. Multiply both sides by RR: gR≤μsv2g R \le \mu_s v^2

  3. Divide both sides by μs\mu_s: v2≥gRμsv^2 \ge \frac{g R}{\mu_s}

  4. Take the square root for the minimum speed: vmin⁡=gRμs=9.80⋅6.200.550=110.47≈10.5 m/sv_{\min} = \sqrt{\frac{g R}{\mu_s}} = \sqrt{\frac{9.80 \cdot 6.20}{0.550}} = \sqrt{110.47} \approx 10.5\text{ m/s}

Final answer

vmin⁡=10.5 m/sv_{\min} = 10.5\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating variables in two distinct steps: clear fractions first, then divide by coefficients.

  • Perform a dimensional check whenever you derive a symbolic physics formula.

  • Evaluate whether the final numerical value makes intuitive physical sense (walking speed vs. motorcycle speed).

OverviewACEpath Teacher's Diagnosis

03 The student forgets to take the square root of the velocity squared after isolating v² in the centripetal force formula, giving v_min ≈ 110 m/s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    fs=mg  ⟹  N=mv2R  ⟹  mg=μsN=μsmv2Rf_s = mg \implies N = \frac{m v^2}{R} \implies mg = \mu_s N = \mu_s \frac{m v^2}{R}

  2. Step 2

    v2=gRμs  ⟹  v2=9.80⋅6.200.550=60.760.550v^2 = \frac{g R}{\mu_s} \implies v^2 = \frac{9.80 \cdot 6.20}{0.550} = \frac{60.76}{0.550}

  3. Step 3

    vmin⁡=110.5 m/sv_{\min} = 110.5\text{ m/s}

    Correct

    vmin⁡=60.760.550=110.47≈10.5 m/sv_{\min} = \sqrt{\frac{60.76}{0.550}} = \sqrt{110.47} \approx 10.5\text{ m/s}

    You reported the value of v2v^2 as the speed itself without taking the square root.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the normal force provides the horizontal centripetal acceleration.

You correctly balanced downward gravity with vertical static friction.

You correctly isolated v2v^2 in terms of the given parameters.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted square root operation

You solved for v2≈110.5 m2/s2v^2 \approx 110.5\text{ m}^2/\text{s}^2 but forgot to apply the square root to obtain vv.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Losing track of the target variable's exponent during multi-step numerical substitution, causing the squared value to be reported as the primary quantity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional and Unit Consistency
  • The quotient gRμs\frac{g R}{\mu_s} has units of m2/s2\text{m}^2/\text{s}^2, which corresponds to velocity squared (v2v^2), not velocity (vv).

  • Always check whether the units of your isolated intermediate quantity match the units of the requested variable before boxing the answer.

Order-of-Magnitude Sanity Check
  • A speed of 110.5 m/s110.5\text{ m/s} corresponds to roughly 400 km/h400\text{ km/h} (250 mph250\text{ mph}), which is unrealistically fast for a Wall of Death motorcycle.

  • Perform a physical plausibility check on the magnitude of your final answer.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. v2≈110.47 m2/s2v^2 \approx 110.47\text{ m}^2/\text{s}^2

  2. vmin⁡=110.47 m2/s2≈10.5 m/sv_{\min} = \sqrt{110.47\text{ m}^2/\text{s}^2} \approx 10.5\text{ m/s}

Final answer

vmin⁡≈10.5 m/sv_{\min} \approx 10.5\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Explicitly write the radical symbol v=…v = \sqrt{\dots} as an algebraic step before plugging in numbers.

  • Verify your final units to confirm you have evaluated linear velocity (m/s\text{m/s}) rather than squared velocity (m2/s2\text{m}^2/\text{s}^2).

Lock it in

Similar question

01

A carnival ride called the 'Rotor' is a vertical cylinder of radius R=4.0 mR = 4.0\text{ m}. If the coefficient of static friction between a rider and the wall is μs=0.40\mu_s = 0.40, calculate the minimum speed vmin⁡v_{\min} required so the floor can drop out without the rider slipping. Use g=9.8 m/s2g = 9.8\text{ m/s}^2.

Answer

vmin⁡≈9.9 m/sv_{\min} \approx 9.9\text{ m/s}. From vertical equilibrium fs=mgf_s = mg and radial dynamics N=mv2RN = \frac{mv^2}{R}, applying fs≤μsNf_s \le \mu_s N yields v≥gRμs=9.8⋅4.00.40=98≈9.9 m/sv \ge \sqrt{\frac{g R}{\mu_s}} = \sqrt{\frac{9.8 \cdot 4.0}{0.40}} = \sqrt{98} \approx 9.9\text{ m/s}.

02

A stunt rider travels inside a vertical cylindrical drum of radius R=8.00 mR = 8.00\text{ m} at a constant speed of 14.0 m/s14.0\text{ m/s}. What is the minimum coefficient of static friction μs,min⁡\mu_{s,\min} needed between the tires and the wall to keep the motorcycle from sliding down? Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

μs,min⁡=0.400\mu_{s,\min} = 0.400. From vmin⁡=gRμsv_{\min} = \sqrt{\frac{g R}{\mu_s}}, rearrange to get μs≥gRv2=9.80⋅8.00(14.0)2=78.4196=0.400\mu_s \ge \frac{g R}{v^2} = \frac{9.80 \cdot 8.00}{(14.0)^2} = \frac{78.4}{196} = 0.400.

03

A small block rests against the inside vertical wall of a hollow cylinder rotating with angular speed ω\omega about its vertical central axis. If the cylinder has radius R=0.50 mR = 0.50\text{ m} and μs=0.20\mu_s = 0.20, what is the minimum angular velocity ωmin⁡\omega_{\min} required in rad/s\text{rad/s} to prevent the block from slipping downward? Use g=9.8 m/s2g = 9.8\text{ m/s}^2.

Answer

ωmin⁡≈9.9 rad/s\omega_{\min} \approx 9.9\text{ rad/s}. The normal force provides centripetal acceleration: N=mω2RN = m\omega^2 R. Vertical balance requires fs=mg≤μsN=μsmω2Rf_s = mg \le \mu_s N = \mu_s m\omega^2 R. Thus ω≥gμsR=9.80.20⋅0.50=98≈9.9 rad/s\omega \ge \sqrt{\frac{g}{\mu_s R}} = \sqrt{\frac{9.8}{0.20 \cdot 0.50}} = \sqrt{98} \approx 9.9\text{ rad/s}.

Loading workspace…