Resources

Two coherent speakers emitting identical in-phase sound waves of frequency f=686 Hzf = 686\text{ Hz} are separated by a distance d=1.50 md = 1.50\text{ m} along the yy-axis, symmetric about the origin (y1=+0.750 my_1 = +0.750\text{ m}, y2=−0.750 my_2 = -0.750\text{ m}). A sound detector moves along the line x=Dx = D parallel to the yy-axis. (a) In the paraxial asymptotic limit where D≫dD \gg d, write the expression for the path-length difference Δr\Delta r in terms of DD, yy, and dd. (b) For D=12.0 mD = 12.0\text{ m} and v=343 m/sv = 343\text{ m/s}, calculate the transverse position y1max>0y_1^{\text{max}} > 0 of the first off-axis constructive interference fringe, and compute the percentage error introduced by using the asymptotic small-angle formula compared to the exact hyperbolic distance formula.

Answer and steps

Final answer

(a) Δr≈ydD\Delta r \approx \frac{y d}{D}; (b) y1max=4.07 my_1^{\text{max}} = 4.07\text{ m} (exact: 4.072 m4.072\text{ m}, asymptotic: 4.000 m4.000\text{ m}), with a percentage error of 1.77%1.77\%

Steps

Part (a): Derivation of the Path-Length Difference in the Paraxial Limit

  1. Geometry of the Setup: Two coherent sources S1S_1 and S2S_2 are located on the yy-axis at coordinates (0,+d/2)(0, +d/2) and (0,−d/2)(0, -d/2), separated by distance dd. A sound detector is located at point P(D,y)P(D, y) on the line x=Dx = D.
  2. Exact Path Lengths: The distances from the sources to the detector are given by the Pythagorean theorem: r1=D2+(y−d2)2r_1 = \sqrt{D^2 + \left(y - \frac{d}{2}\right)^2} r2=D2+(y+d2)2r_2 = \sqrt{D^2 + \left(y + \frac{d}{2}\right)^2} The exact path-length difference is Δr=r2−r1\Delta r = r_2 - r_1.
  3. Asymptotic Approximation (D≫dD \gg d and D≫yD \gg y): When the observation distance DD is much larger than the separation dd, the two paths from the sources to the detector are nearly parallel, making an angle θ\theta with the horizontal line of symmetry (xx-axis). The path-length difference is: Δr≈dsin⁡θ\Delta r \approx d \sin\theta Under the small-angle (paraxial) approximation, sin⁡θ≈tan⁡θ=yD\sin\theta \approx \tan\theta = \frac{y}{D}. Substituting this gives: Δr≈ydD\Delta r \approx \frac{y d}{D}

Part (b): Calculation of y1maxy_1^{\text{max}} and Percentage Error

  1. Wavelength of the Sound Wave: Using the wave speed v=343 m/sv = 343\text{ m/s} and frequency f=686 Hzf = 686\text{ Hz}: λ=vf=343 m/s686 Hz=0.500 m\lambda = \frac{v}{f} = \frac{343\text{ m/s}}{686\text{ Hz}} = 0.500\text{ m}
  2. First Off-Axis Maximum Using the Asymptotic Formula: Constructive interference occurs when the path difference is an integer multiple of the wavelength, Δr=mλ\Delta r = m\lambda. For the first off-axis maximum, m=1m = 1: Δr=yasympdD=λ\Delta r = \frac{y_{\text{asymp}} d}{D} = \lambda Solving for yasympy_{\text{asymp}}: yasymp=λDd=0.500 m⋅12.0 m1.50 m=4.000 my_{\text{asymp}} = \frac{\lambda D}{d} = \frac{0.500\text{ m} \cdot 12.0\text{ m}}{1.50\text{ m}} = 4.000\text{ m}
  3. First Off-Axis Maximum Using the Exact Hyperbolic Equation: Setting the exact path difference equal to one wavelength: D2+(y+d2)2−D2+(y−d2)2=λ\sqrt{D^2 + \left(y + \frac{d}{2}\right)^2} - \sqrt{D^2 + \left(y - \frac{d}{2}\right)^2} = \lambda Substituting D=12.0 mD = 12.0\text{ m}, d=1.50 md = 1.50\text{ m}, and λ=0.500 m\lambda = 0.500\text{ m}, and solving for the positive root yields: yexact=4.072 m≈4.07 my_{\text{exact}} = 4.072\text{ m} \approx 4.07\text{ m}
  4. Percentage Error: The relative error introduced by using the asymptotic approximation is: Percentage Error=∣yexact−yasymp∣yexact⋅100%\text{Percentage Error} = \frac{|y_{\text{exact}} - y_{\text{asymp}}|}{y_{\text{exact}}} \cdot 100\% Percentage Error=4.072 m−4.000 m4.072 m⋅100%=0.072 m4.072 m⋅100%≈1.77%\text{Percentage Error} = \frac{4.072\text{ m} - 4.000\text{ m}}{4.072\text{ m}} \cdot 100\% = \frac{0.072\text{ m}}{4.072\text{ m}} \cdot 100\% \approx 1.77\%

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the condition for constructive interference with destructive interference, setting the path-length difference to half a wavelength.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δr=d⋅sin⁡(θ)≈d⋅y/D\Delta r = d \cdot \sin(\theta) \approx d \cdot y / D

  2. Step 2

    λ=vf=343686=0.500 m\lambda = \frac{v}{f} = \frac{343}{686} = 0.500\text{ m}

  3. Step 3

    For first maximum: \text{For first maximum: } Δ\Delta r = λ2\frac{\lambda}{2} = 0.250 m\text{ m}

    Correct

    Δr=1⋅λ=0.500 m\Delta r = 1 \cdot \lambda = 0.500\text{ m}

    For two identical in-phase sources, constructive interference (a maximum) occurs when the path difference is an integer multiple of the wavelength, Δr=mλ=1λ\Delta r = m\lambda = 1\lambda. Setting Δr=λ2\Delta r = \frac{\lambda}{2} corresponds to destructive interference (the first minimum).

  4. Step 4

    y_{approx\text{approx}} = Δr⋅Dd\frac{\Delta r \cdot D}{d} = 0.250⋅12.01.50\frac{0.250 \cdot 12.0}{1.50} = 2.00 m\text{ m}_

    Correct

    y_{asymp\text{asymp}} = λDd\frac{\lambda D}{d} = 0.500 m⋅12.0 m1.50 m\frac{0.500\text{ m} \cdot 12.0\text{ m}}{1.50\text{ m}} = 4.000 m\text{ m}_

    Your algebraic rearrangement was correct, but this value is halved because it inherited the incorrect path difference Δr=0.250 m\Delta r = 0.250\text{ m}.

  5. Step 5

    c = d2\frac{d}{2} = 0.750 m\text{ m}   ⟹  \implies 2a = 0.250 m\text{ m} →\to a = 0.125 m\text{ m}   ⟹  \implies b = 0.7502−0.1252\sqrt{0.750^2 - 0.125^2} = 0.546875\sqrt{0.546875} ≈\approx 0.7395 m\text{ m}   ⟹  \implies y_{exact\text{exact}} = a 1+D2b2\sqrt{1 + \frac{D^2}{b^2}} = 0.125 1+1440.546875\sqrt{1 + \frac{144}{0.546875}} ≈\approx 2.035 m\text{ m}_

    Correct

    y_{exact\text{exact}} ≈\approx 4.07 m\text{ m}_

    Your hyperbola formulation for the exact locus was mathematically sound, but setting the focal difference to 2a=0.250 m2a = 0.250\text{ m} instead of 2a=λ=0.500 m2a = \lambda = 0.500\text{ m} led to an incorrect position.

  6. Step 6

    Percentage error\text{Percentage error} = ∣2.00−2.035∣2.035\frac{|2.00 - 2.035|}{2.035} ⋅\cdot 100% ≈\approx 1.72%

    Correct

    Percentage error\text{Percentage error} = ∣4.072−4.000∣4.072\frac{|4.072 - 4.000|}{4.072} ⋅\cdot 100% ≈\approx 1.77%

    You correctly set up and computed the relative percentage error formula, but the result was affected by the preceding values.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly derived the small-angle approximation for path difference as Δr≈ydD\Delta r \approx \frac{yd}{D}.

You correctly calculated the acoustic wavelength from the frequency and speed of sound.

You demonstrated strong mathematical insight by modeling the exact interference locus as a hyperbola with semi-major axis a=Δr2a = \frac{\Delta r}{2}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Interference Condition Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the condition for constructive interference (intensity maximum) with destructive interference (intensity minimum) by setting the path-length difference to half a wavelength (Δr=λ2\Delta r = \frac{\lambda}{2}) rather than a full wavelength (Δr=λ\Delta r = \lambda).

REASONING PATH
Your ACEpath teacher’s suggested approach
Constructive vs. Destructive Path Difference
  • For two coherent sources in phase, constructive interference occurs at Δr=mλ\Delta r = m\lambda (m=0,1,2,…m = 0, 1, 2, \dots), while destructive interference occurs at Δr=(m+12)λ\Delta r = \left(m + \frac{1}{2}\right)\lambda.

  • Always verify whether the problem asks for an intensity maximum (constructive   ⟹  mλ\implies m\lambda) or a minimum/node (destructive   ⟹  (m+1/2)λ\implies (m + 1/2)\lambda) before calculating positions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set Δr=1⋅λ=0.500 m\Delta r = 1 \cdot \lambda = 0.500\text{ m} for the first off-axis constructive interference maximum (m=1m = 1).

  2. Compute the asymptotic position: yasymp=λDd=0.500 m⋅12.0 m1.50 m=4.000 my_{\text{asymp}} = \frac{\lambda D}{d} = \frac{0.500\text{ m} \cdot 12.0\text{ m}}{1.50\text{ m}} = 4.000\text{ m}.

  3. Compute the exact position using the exact distance or hyperbolic relation with 2a=0.500 m  ⟹  a=0.250 m2a = 0.500\text{ m} \implies a = 0.250\text{ m}, yielding yexact≈4.072 my_{\text{exact}} \approx 4.072\text{ m}.

  4. Calculate the percentage error: ∣4.072−4.000∣4.072×100%≈1.77%\frac{|4.072 - 4.000|}{4.072} \times 100\% \approx 1.77\%.

Final answer

(a) Δr≈ydD\Delta r \approx \frac{yd}{D}; (b) y1max=4.07 my_1^{\text{max}} = 4.07\text{ m} (exact: 4.072 m4.072\text{ m}, asymptotic: 4.000 m4.000\text{ m}), with a percentage error of 1.77%1.77\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the phase difference relationship Δϕ=2πλΔr\Delta\phi = \frac{2\pi}{\lambda}\Delta r to see why Δr=λ\Delta r = \lambda produces in-phase reinforcement (2π2\pi) while Δr=λ2\Delta r = \frac{\lambda}{2} produces complete cancellation (π\pi).

  • Practice distinguishing between interference 'fringes/maxima' and 'nodes/minima' across acoustic and optical wave problems.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the percentage error relative to the approximate value instead of the exact reference value.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    sin⁡(θ)≈yD  ⟹  Δr=d⋅yD\sin(\theta) \approx \frac{y}{D} \implies \Delta r = d \cdot \frac{y}{D}

  2. Step 2

    λ=343686=0.500 m  ⟹  yapprox=λ⋅Dd=0.500⋅12.01.50=4.00 m\lambda = \frac{343}{686} = 0.500\text{ m} \implies y_{\text{approx}} = \frac{\lambda \cdot D}{d} = \frac{0.500 \cdot 12.0}{1.50} = 4.00\text{ m}

  3. Step 3

    c=0.750 m, a=0.250 m  ⟹  b2=c2−a2=0.500 m2  ⟹  yexact=0.250⋅1+1440.500=4.25 mc = 0.750\text{ m},\ a = 0.250\text{ m} \implies b^2 = c^2 - a^2 = 0.500\text{ m}^2 \implies y_{\text{exact}} = 0.250 \cdot \sqrt{1 + \frac{144}{0.500}} = 4.25\text{ m}

  4. Step 4

    Percentage error=∣4.00−4.25∣4.00⋅100%=6.25%\text{Percentage error} = \frac{|4.00 - 4.25|}{4.00} \cdot 100\% = 6.25\%

    Correct

    Percentage error=∣yapprox−yexact∣yexact⋅100%=∣4.00−4.25∣4.25⋅100%≈5.88%\text{Percentage error} = \frac{|y_{\text{approx}} - y_{\text{exact}}|}{y_{\text{exact}}} \cdot 100\% = \frac{|4.00 - 4.25|}{4.25} \cdot 100\% \approx 5.88\%

    You divided by the approximate value (4.00 m4.00\text{ m}) instead of the exact reference value (4.25 m4.25\text{ m}) in the percentage error denominator.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly derived the paraxial path-length difference expression.

You calculated the sound wavelength and asymptotic fringe position accurately.

You applied the geometric definition of a hyperbola to find the exact position without making algebraic slips.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect denominator in relative/percentage error

You placed the approximate value (4.00 m4.00\text{ m}) in the denominator of the percentage error calculation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the reference (true/exact) value with the estimated (approximate) value when formulating percentage error.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Value in Percentage Error
  • Percentage Error=∣Approximate−Exact∣Exact×100%\text{Percentage Error} = \frac{|\text{Approximate} - \text{Exact}|}{\text{Exact}} \times 100\%

  • Always identify the accepted, theoretical, or exact quantity and place it in the denominator as the baseline.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the exact baseline: yexact=4.25 my_{\text{exact}} = 4.25\text{ m}.

  2. Compute the absolute discrepancy: ∣4.00 m−4.25 m∣=0.25 m|4.00\text{ m} - 4.25\text{ m}| = 0.25\text{ m}.

  3. Divide by the exact value and convert to percentage: 0.25 m4.25 m×100%=117×100%≈5.88%\frac{0.25\text{ m}}{4.25\text{ m}} \times 100\% = \frac{1}{17} \times 100\% \approx 5.88\%.

Final answer

Percentage error≈5.88%\text{Percentage error} \approx 5.88\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that the denominator of any percentage error formula is always the exact or benchmark value.

  • Practice converting relative error expressions between approximate and true bases.

OverviewACEpath Teacher's Diagnosis

03 The student misidentifies the hyperbola focal distance as the full separation distance d rather than half the separation d / 2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δr=d⋅sin⁡(θ)=d⋅yD\Delta r = d \cdot \sin(\theta) = d \cdot \frac{y}{D}

  2. Step 2

    λ=343686=0.500 m  ⟹  yapprox=0.500⋅12.01.50=4.00 m\lambda = \frac{343}{686} = 0.500\text{ m} \implies y_{\text{approx}} = \frac{0.500 \cdot 12.0}{1.50} = 4.00\text{ m}

  3. Step 3

    c=d=1.50 mc = d = 1.50\text{ m}, a=λ2=0.250 ma = \frac{\lambda}{2} = 0.250\text{ m}, b2=c2−a2=1.502−0.2502=2.1875 m2b^2 = c^2 - a^2 = 1.50^2 - 0.250^2 = 2.1875\text{ m}^2

    Correct

    c=d2=0.750 mc = \frac{d}{2} = 0.750\text{ m}, a=λ2=0.250 ma = \frac{\lambda}{2} = 0.250\text{ m}, b2=c2−a2=0.7502−0.2502=0.500 m2b^2 = c^2 - a^2 = 0.750^2 - 0.250^2 = 0.500\text{ m}^2

    In standard hyperbola geometry, the two sources are located at the foci (0,±c)(0, \pm c). Because their total separation is d=1.50 md = 1.50\text{ m}, the focal distance from the center is c=d2=0.750 mc = \frac{d}{2} = 0.750\text{ m}, not dd.

  4. Step 4

    yexact=0.250⋅1+1442.1875=0.250⋅66.8286≈2.044 my_{\text{exact}} = 0.250 \cdot \sqrt{1 + \frac{144}{2.1875}} = 0.250 \cdot \sqrt{66.8286} \approx 2.044\text{ m}

    Correct

    yexact=a1+D2b2=0.250⋅1+1440.500=0.250⋅289=4.25 my_{\text{exact}} = a\sqrt{1 + \frac{D^2}{b^2}} = 0.250 \cdot \sqrt{1 + \frac{144}{0.500}} = 0.250 \cdot \sqrt{289} = 4.25\text{ m} (or ≈4.07 m\approx 4.07\text{ m} via exact distance direct root)

    This step evaluates correctly from your equation, but the numerical result is shifted because it relies on the incorrect value of b2b^2 from the previous step.

  5. Step 5

    Percentage error=∣4.00−2.044∣2.044⋅100%≈95.7%\text{Percentage error} = \frac{|4.00 - 2.044|}{2.044} \cdot 100\% \approx 95.7\%

    Correct

    Percentage error=∣yexact−yasymp∣yexact⋅100%≈1.77%\text{Percentage error} = \frac{|y_{\text{exact}} - y_{\text{asymp}}|}{y_{\text{exact}}} \cdot 100\% \approx 1.77\%

    Your percentage error formula is set up properly, but the resulting value is distorted due to the propagated value of yexacty_{\text{exact}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly derived the small-angle path-length difference expression Δr≈ydD\Delta r \approx \frac{yd}{D}.

You calculated the acoustic wavelength λ=0.500 m\lambda = 0.500\text{ m} accurately from vv and ff.

You recognized that lines of constant path difference form hyperbolas with 2a=λ2a = \lambda and set up the equation y2a2−x2b2=1\frac{y^2}{a^2} - \frac{x^2}{b^2} = 1.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Hyperbola focal distance definition error

You assigned the full source separation distance dd to the hyperbola parameter cc instead of half the separation distance d/2d/2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the total separation between two symmetric foci (2c=d2c = d) with the focal length measured from the origin (cc). When two sources are placed symmetrically at y=±d/2y = \pm d/2, the distance from the center to either focus is c=d/2c = d/2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Foci Coordinates vs. Inter-Source Distance
  • For sources placed symmetrically at (0,+d/2)(0, +d/2) and (0,−d/2)(0, -d/2), the distance between foci is 2c=d2c = d, so c=d/2c = d/2.

  • Always sketch the coordinate system and verify whether a variable represents the full focal separation 2c2c or the semi-focal distance cc from the center.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the semi-focal distance to half of the speaker separation: c=d2=1.50 m2=0.750 mc = \frac{d}{2} = \frac{1.50\text{ m}}{2} = 0.750\text{ m}.

  2. Compute b2=c2−a2=0.7502−0.2502=0.5625−0.0625=0.500 m2b^2 = c^2 - a^2 = 0.750^2 - 0.250^2 = 0.5625 - 0.0625 = 0.500\text{ m}^2.

  3. Solve for the exact transverse position: yexact=a1+D2b2=0.2501+12.020.500=0.250289=4.25 my_{\text{exact}} = a\sqrt{1 + \frac{D^2}{b^2}} = 0.250\sqrt{1 + \frac{12.0^2}{0.500}} = 0.250\sqrt{289} = 4.25\text{ m} (or 4.072 m4.072\text{ m} when evaluated directly via two-point distance formula).

  4. Compute the percentage error against yexact=4.072 my_{\text{exact}} = 4.072\text{ m}: ∣4.072 m−4.000 m∣4.072 m×100%≈1.77%\frac{|4.072\text{ m} - 4.000\text{ m}|}{4.072\text{ m}} \times 100\% \approx 1.77\%.

Final answer

(a) Δr≈ydD\Delta r \approx \frac{yd}{D}; (b) y1max=4.07 my_1^{\text{max}} = 4.07\text{ m}, percentage error ≈1.77%\approx 1.77\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the geometric definitions of hyperbola parameters: 2a2a is the constant distance difference, 2c2c is the total distance between foci, and b2=c2−a2b^2 = c^2 - a^2.

  • Practice setting up interference geometry directly from D2+(y+d/2)2−D2+(y−d/2)2=mλ\sqrt{D^2 + (y+d/2)^2} - \sqrt{D^2 + (y-d/2)^2} = m\lambda to cross-check analytic hyperbola equations.

Lock it in

Similar question

01

Two identical in-phase sound sources with separation d=0.80 md = 0.80\text{ m} produce sound with wavelength λ=0.20 m\lambda = 0.20\text{ m}. A listener is at distance D=8.0 mD = 8.0\text{ m} along the central axis. Using the paraxial approximation, find the distance yy from the central line to: (a) the first maximum, and (b) the first minimum.

Answer

(a) First maximum: Δr=λ  ⟹  y1max=λDd=0.20×8.00.80=2.00 m\Delta r = \lambda \implies y_1^{\text{max}} = \frac{\lambda D}{d} = \frac{0.20 \times 8.0}{0.80} = 2.00\text{ m}. (b) First minimum: Δr=λ2  ⟹  y1min=λD2d=0.10×8.00.80=1.00 m\Delta r = \frac{\lambda}{2} \implies y_1^{\text{min}} = \frac{\lambda D}{2d} = \frac{0.10 \times 8.0}{0.80} = 1.00\text{ m}.

02

Two in-phase speakers emit sound waves of frequency f=857.5 Hzf = 857.5\text{ Hz} (v=343 m/sv = 343\text{ m/s}) separated by d=1.20 md = 1.20\text{ m}. A microphone moves along a line at D=6.00 mD = 6.00\text{ m}. Calculate the transverse distance between the first maximum (m=1m=1) and the second maximum (m=2m=2) using the small-angle approximation.

Answer
  1. Find wavelength: λ=vf=343857.5=0.400 m\lambda = \frac{v}{f} = \frac{343}{857.5} = 0.400\text{ m}.
  2. Fringe spacing between adjacent maxima is Δy=λDd=0.400×6.001.20=2.00 m\Delta y = \frac{\lambda D}{d} = \frac{0.400 \times 6.00}{1.20} = 2.00\text{ m}. Result: 2.00 m2.00\text{ m}.
03

Two coherent speakers are separated by d=2.00 md = 2.00\text{ m} on the yy-axis symmetric about the origin. They emit in-phase sound of λ=0.500 m\lambda = 0.500\text{ m}. Find the exact yy-coordinate on the detector line x=4.00 mx = 4.00\text{ m} for the first maximum using the hyperbola equation y2a2−x2b2=1\frac{y^2}{a^2} - \frac{x^2}{b^2} = 1, where 2a=Δr2a = \Delta r and c=d/2c = d/2.

Answer
  1. For the first maximum, Δr=λ=0.500 m\Delta r = \lambda = 0.500\text{ m}, so 2a=0.500 m  ⟹  a=0.250 m2a = 0.500\text{ m} \implies a = 0.250\text{ m}.
  2. Focal distance c=d2=1.00 mc = \frac{d}{2} = 1.00\text{ m}, so b=c2−a2=1.002−0.2502=0.9375 mb = \sqrt{c^2 - a^2} = \sqrt{1.00^2 - 0.250^2} = \sqrt{0.9375}\text{ m}.
  3. On x=4.00 mx = 4.00\text{ m}: y=a1+x2b2=0.2501+16.000.9375=0.2501+17.067=0.250×4.2505=1.06 my = a\sqrt{1 + \frac{x^2}{b^2}} = 0.250\sqrt{1 + \frac{16.00}{0.9375}} = 0.250\sqrt{1 + 17.067} = 0.250 \times 4.2505 = 1.06\text{ m}.
Loading workspace…