Resources

An unknown mechanical periodic wave propagates horizontally in an isotropic medium along the +x+x-direction with a phase speed of v=1500 m/sv = 1500\text{ m/s}. At a fixed monitoring sensor located at x=0 mx = 0\text{ m}, individual elements of the medium oscillate along the xx-axis according to the displacement relation ξ(t)=ξ0sin⁡(2πft)\xi(t) = \xi_0 \sin(2\pi f t), where the peak displacement is ξ0=2.40×10−5 m\xi_0 = 2.40\times 10^{-5}\text{ m}. An acoustic sensor records that the maximum acceleration experienced by the oscillating elements in the medium is amax=3.79×103 m/s2a_{\text{max}} = 3.79\times 10^3\text{ m/s}^2. (a) Classify this wave as transverse or longitudinal based on the orientation of ξ(t)\xi(t) relative to the propagation axis. (b) Reverse-engineer the oscillation frequency ff of the source driving the wave. (c) Determine the spatial period (wavelength λ\lambda) of the wave.

Answer and steps

Final answer

(a) Longitudinal wave, because element displacements ξ(t)\xi(t) occur along the xx-axis, parallel to the +x+x wave propagation direction; (b) f=2.00×103 Hzf = 2.00\times 10^3\text{ Hz}; (c) λ=0.750 m\lambda = 0.750\text{ m}.

Steps

Part (a): Classifying the Wave

A mechanical wave is classified by comparing the direction of particle displacement to the direction of wave propagation:

  • Transverse wave: Particle oscillations are perpendicular (orthogonal) to the direction in which the wave travels.
  • Longitudinal wave: Particle oscillations are parallel (collinear) to the direction in which the wave travels.

Here, the wave propagates along the +x+x-axis, and the medium elements oscillate along the xx-axis according to ξ(t)\xi(t). Because the oscillation axis is parallel to the direction of propagation, the wave is a longitudinal wave.


Part (b): Finding the Oscillation Frequency ff

Each particle of the medium undergoes simple harmonic motion (SHM) about its equilibrium position: ξ(t)=ξ0sin⁡(ωt)\xi(t) = \xi_0 \sin(\omega t)

where ω=2πf\omega = 2\pi f is the angular frequency.

  1. Relate acceleration to displacement:
    Differentiating the displacement with respect to time gives the particle acceleration: a(t)=d2ξdt2=−ω2ξ0sin⁡(ωt)a(t) = \frac{\mathrm{d}^2\xi}{\mathrm{d}t^2} = -\omega^2 \xi_0 \sin(\omega t)

    The magnitude of the maximum acceleration is: amax=ω2ξ0=(2πf)2ξ0a_{\text{max}} = \omega^2 \xi_0 = (2\pi f)^2 \xi_0

  2. Solve for the angular frequency ω\omega: ω2=amaxξ0=3.79×103 m/s22.40×10−5 m≈1.579×108 s−2\omega^2 = \frac{a_{\text{max}}}{\xi_0} = \frac{3.79 \times 10^3\text{ m/s}^2}{2.40 \times 10^{-5}\text{ m}} \approx 1.579 \times 10^8\text{ s}^{-2} ω=1.579×108 s−2≈1.257×104 rad/s\omega = \sqrt{1.579 \times 10^8\text{ s}^{-2}} \approx 1.257 \times 10^4\text{ rad/s}
  3. Calculate the frequency ff: f=ω2π=1.257×104 rad/s2π=2.00×103 Hzf = \frac{\omega}{2\pi} = \frac{1.257 \times 10^4\text{ rad/s}}{2\pi} = 2.00 \times 10^3\text{ Hz}

Part (c): Determining the Wavelength λ\lambda

The fundamental wave relation connects wave speed vv, frequency ff, and wavelength λ\lambda: v=fλv = f \lambda

Rearranging for the wavelength: λ=vf=1500 m/s2.00×103 Hz=0.750 m\lambda = \frac{v}{f} = \frac{1500\text{ m/s}}{2.00 \times 10^3\text{ Hz}} = 0.750\text{ m}

(Pitfall to avoid: Do not confuse the wave propagation speed v=1500 m/sv = 1500\text{ m/s} with the maximum particle speed vmax=ωξ0≈0.302 m/sv_{\text{max}} = \omega \xi_0 \approx 0.302\text{ m/s}. The wave travels through space at speed vv, while the individual particles oscillate locally about their equilibrium positions.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that acceleration is proportional to the square of angular frequency and uses a_max = ω · ξ₀ instead of ω² · ξ₀, resulting in an incorrect frequency and wavelength.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Oscillation is parallel to propagation (+x+x-direction). ⟹\Longrightarrow The wave is longitudinal.

  2. Step 2

    amax=ω⋅ξ0=2πf⋅ξ0⟹f=amax2π⋅ξ0=3.79×1032π⋅2.40×10−5=2.51×107 Hza_{\text{max}} = \omega \cdot \xi_0 = 2\pi f \cdot \xi_0 \Longrightarrow f = \frac{a_{\text{max}}}{2\pi \cdot \xi_0} = \frac{3.79\times 10^3}{2\pi \cdot 2.40\times 10^{-5}} = 2.51\times 10^7\text{ Hz}

    Correct

    amax=ω2ξ0=(2πf)2ξ0⟹f=12πamaxξ0=12π3.79×103 m/s22.40×10−5 m≈2.00×103 Hza_{\text{max}} = \omega^2 \xi_0 = (2\pi f)^2 \xi_0 \Longrightarrow f = \frac{1}{2\pi}\sqrt{\frac{a_{\text{max}}}{\xi_0}} = \frac{1}{2\pi}\sqrt{\frac{3.79\times 10^3\text{ m/s}^2}{2.40\times 10^{-5}\text{ m}}} \approx 2.00\times 10^3\text{ Hz}

    You related maximum acceleration to displacement linearly with ω\omega, but taking two time derivatives of ξ(t)=ξ0sin⁡(ωt)\xi(t) = \xi_0 \sin(\omega t) yields a(t)=−ω2ξ0sin⁡(ωt)a(t) = -\omega^2 \xi_0 \sin(\omega t), meaning amax=ω2ξ0a_{\text{max}} = \omega^2 \xi_0.

  3. Step 3

    λ=vf=15002.51×107=5.98×10−5 m\lambda = \frac{v}{f} = \frac{1500}{2.51\times 10^7} = 5.98\times 10^{-5}\text{ m}

    Correct

    λ=vf=1500 m/s2.00×103 Hz=0.750 m\lambda = \frac{v}{f} = \frac{1500\text{ m/s}}{2.00\times 10^3\text{ Hz}} = 0.750\text{ m}

    You used the correct relation λ=vf\lambda = \frac{v}{f}, but your numerical result was affected by the incorrect frequency from part (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that parallel particle oscillation defines a longitudinal wave.

You set up the standard wave relation λ=vf\lambda = \frac{v}{f} properly for part (c).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula confusion between maximum velocity and maximum acceleration in SHM

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the maximum particle velocity relation vmax=ωξ0v_{\text{max}} = \omega \xi_0 with the maximum particle acceleration relation amax=ω2ξ0a_{\text{max}} = \omega^2 \xi_0. Differentiating displacement twice with respect to time brings out a factor of ω\omega for each derivative.

REASONING PATH
Your ACEpath teacher’s suggested approach
Simple Harmonic Motion Derivations
  • For displacement ξ(t)=ξ0sin⁡(ωt)\xi(t) = \xi_0 \sin(\omega t), velocity is v(t)=ωξ0cos⁡(ωt)v(t) = \omega \xi_0 \cos(\omega t) (vmax=ωξ0v_{\text{max}} = \omega \xi_0) and acceleration is a(t)=−ω2ξ0sin⁡(ωt)a(t) = -\omega^2 \xi_0 \sin(\omega t) (amax=ω2ξ0a_{\text{max}} = \omega^2 \xi_0).

  • Double-check whether the given quantity is velocity or acceleration, and square ω\omega whenever dealing with acceleration amplitudes.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the correct acceleration amplitude: amax=ω2ξ0=(2πf)2ξ0a_{\text{max}} = \omega^2 \xi_0 = (2\pi f)^2 \xi_0

  2. Solve for frequency: f=12πamaxξ0=12π3.79×103 m/s22.40×10−5 m=2.00×103 Hzf = \frac{1}{2\pi}\sqrt{\frac{a_{\text{max}}}{\xi_0}} = \frac{1}{2\pi}\sqrt{\frac{3.79\times 10^3\text{ m/s}^2}{2.40\times 10^{-5}\text{ m}}} = 2.00\times 10^3\text{ Hz}

  3. Substitute f=2.00×103 Hzf = 2.00\times 10^3\text{ Hz} into λ=vf\lambda = \frac{v}{f}: λ=1500 m/s2.00×103 Hz=0.750 m\lambda = \frac{1500\text{ m/s}}{2.00\times 10^3\text{ Hz}} = 0.750\text{ m}

Final answer

(a) Longitudinal; (b) f=2.00×103 Hzf = 2.00\times 10^3\text{ Hz}; (c) λ=0.750 m\lambda = 0.750\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivatives of harmonic displacement ξ(t)\xi(t) to connect velocity amplitude ωA\omega A and acceleration amplitude ω2A\omega^2 A.

  • Practice dimensional analysis: notice that ωξ0\omega \xi_0 has units of m/s\text{m/s} (speed), while ω2ξ0\omega^2 \xi_0 has units of m/s2\text{m/s}^2 (acceleration).

OverviewACEpath Teacher's Diagnosis

02 The student calculates angular frequency ω correctly from a_max = ω² · ξ₀ but forgets to divide by 2π to find frequency f, setting f = ω and underestimating the wavelength.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Oscillation occurs along x-axis, parallel to wave motion along +x-direction. The wave is longitudinal.

  2. Step 2

    amax⁡=ω2⋅ξ0  ⟹  ω=amax⁡ξ0=3.79×1032.40×10−5  ⟹  ω=1.26×104 rad/sa_{\max} = \omega^2 \cdot \xi_0 \implies \omega = \sqrt{\frac{a_{\max}}{\xi_0}} = \sqrt{\frac{3.79\times 10^3}{2.40\times 10^{-5}}} \implies \omega = 1.26\times 10^4\text{ rad/s}

  3. Step 3

    f=1.26×104 Hzf = 1.26\times 10^4\text{ Hz}

    Correct

    f=ω2π=1.26×104 rad/s2π≈2.00×103 Hzf = \frac{\omega}{2\pi} = \frac{1.26\times 10^4\text{ rad/s}}{2\pi} \approx 2.00\times 10^3\text{ Hz}

    You set ordinary frequency ff equal to angular frequency ω\omega. Angular frequency measures radians per second, so you must divide by 2π rad/cycle2\pi\text{ rad/cycle} to obtain the frequency in hertz (extcycles/s ext{cycles/s}).

  4. Step 4

    λ=vf  ⟹  λ=15001.26×104  ⟹  λ=0.119 m\lambda = \frac{v}{f} \implies \lambda = \frac{1500}{1.26\times 10^4} \implies \lambda = 0.119\text{ m}

    Correct

    λ=vf=1500 m/s2.00×103 Hz=0.750 m\lambda = \frac{v}{f} = \frac{1500\text{ m/s}}{2.00\times 10^3\text{ Hz}} = 0.750\text{ m}

    Your formula λ=vf\lambda = \frac{v}{f} is correct, but using your uncorrected value of ff led to an underestimated wavelength.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly explained the orientation relationship between particle motion and wave travel to classify the wave.

You used the correct kinematic relation amax⁡=ω2ξ0a_{\max} = \omega^2 \xi_0 for simple harmonic motion.

You selected the correct wave speed relation λ=vf\lambda = \frac{v}{f}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Frequency vs Angular Frequency Confusion

You equated ff and ω\omega numerically instead of dividing by 2π2\pi.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated angular frequency ω\omega (measured in rad/s\text{rad/s}) and ordinary cyclical frequency ff (measured in Hz\text{Hz}) as interchangeable quantities rather than applying the conversion identity ω=2πf\omega = 2\pi f.

REASONING PATH
Your ACEpath teacher’s suggested approach
Convert Angular Frequency to Cyclic Frequency
  • One complete oscillation cycle equals 2π radians2\pi\text{ radians}, so ω=2πf\omega = 2\pi f, or f=ω2πf = \frac{\omega}{2\pi}.

  • Whenever you compute ω=amax⁡ξ0\omega = \sqrt{\frac{a_{\max}}{\xi_0}}, verify the units: if a problem asks for frequency ff in Hz\text{Hz}, divide ω\omega by 2π2\pi before substituting it into wave equations.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the relation between angular frequency and frequency: f=ω2πf = \frac{\omega}{2\pi}.

  2. Substitute ω=1.257×104 rad/s\omega = 1.257\times 10^4\text{ rad/s}: f=1.257×104 rad/s2π=2.00×103 Hzf = \frac{1.257\times 10^4\text{ rad/s}}{2\pi} = 2.00\times 10^3\text{ Hz}.

  3. Substitute the corrected frequency into the wavelength relation: λ=vf=1500 m/s2.00×103 Hz=0.750 m\lambda = \frac{v}{f} = \frac{1500\text{ m/s}}{2.00\times 10^3\text{ Hz}} = 0.750\text{ m}.

Final answer

(a) Longitudinal wave; (b) f=2.00×103 Hzf = 2.00\times 10^3\text{ Hz}; (c) λ=0.750 m\lambda = 0.750\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check units on every frequency parameter: rad/s\text{rad/s} indicates angular frequency ω\omega, while Hz\text{Hz} or s−1\text{s}^{-1} indicates cyclic frequency ff.

  • Practice converting between (f,λ)(f, \lambda) and (ω,k)(\omega, k) using ω=2πf\omega = 2\pi f and k=2πλk = \frac{2\pi}{\lambda} to avoid missing factors of 2π2\pi.

OverviewACEpath Teacher's Diagnosis

03 The student misclassifies the wave as transverse because the motion is described by a sine function, while carrying out the rest of the calculations correctly.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Displacement is described by a sine wave function ξ(t)=ξ0sin⁡(2πft)\xi(t) = \xi_0 \sin(2\pi f t). The wave is transverse.

    Correct

    Longitudinal wave, because medium elements oscillate along the xx-axis, parallel to the +x+x propagation direction.

    You classified the wave as transverse based on the fact that the displacement function is sinusoidal. However, wave classification depends strictly on the physical geometric orientation of particle displacement relative to the direction of propagation. Since the particles oscillate along the xx-axis and the wave travels along the +x+x-direction, the oscillations are parallel to the propagation axis, which defines a longitudinal wave.

  2. Step 2

    amax=(2πf)2⋅ξ0  ⟹  2πf=amaxξ0=3.79×1032.40×10−5=12566 rad/s  ⟹  f=125662π  ⟹  f=2000 Hza_{\text{max}} = (2\pi f)^2 \cdot \xi_0 \implies 2\pi f = \sqrt{\frac{a_{\text{max}}}{\xi_0}} = \sqrt{\frac{3.79\times 10^3}{2.40\times 10^{-5}}} = 12566\text{ rad/s} \implies f = \frac{12566}{2\pi} \implies f = 2000\text{ Hz}

  3. Step 3

    λ=vf  ⟹  λ=15002000  ⟹  λ=0.75 m\lambda = \frac{v}{f} \implies \lambda = \frac{1500}{2000} \implies \lambda = 0.75\text{ m}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related simple harmonic acceleration to peak displacement using amax=ω2ξ0a_{\text{max}} = \omega^2 \xi_0.

You calculated the angular frequency and linear frequency accurately as f=2.00×103 Hzf = 2.00\times 10^3\text{ Hz}.

You correctly applied the relationship λ=vf\lambda = \frac{v}{f} to find the wavelength λ=0.750 m\lambda = 0.750\text{ m}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wave Type Classification by Relative Orientation

Classifying the wave as transverse because its time-dependent displacement is sinusoidal.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the graphical representation of simple harmonic oscillation (a sine curve) with transverse spatial displacement, rather than evaluating whether particle displacement is parallel or perpendicular to the direction of wave travel.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Propagation vs. Oscillation Axes
  • A wave is longitudinal if particle oscillation is parallel to wave propagation ( ξ⃗∥v⃗ \,\vec{\xi} \parallel \vec{v}\, ), and transverse if oscillation is perpendicular to propagation ( ξ⃗⊥v⃗ \,\vec{\xi} \perp \vec{v}\, ). Both longitudinal and transverse harmonic waves have sinusoidal displacement functions.

  • Check the coordinate axis of displacement ξ(t)\xi(t) (here, xx) and the direction of wave velocity v⃗\vec{v} (here, +x+x). Because both lie along the xx-axis, classify the wave as longitudinal.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the direction of wave propagation: along the +x+x-direction.

  2. Identify the direction of particle oscillation from the displacement variable: ξ(t)\xi(t) along the xx-axis.

  3. Compare the two directions: the oscillation axis is parallel (collinear) to the propagation axis.

  4. Conclude that parallel oscillation defines a longitudinal wave, regardless of the mathematical function being a sine or cosine.

Final answer

Longitudinal wave

NEXT STEPS
Final Takeaways from Your Teacher
  • Always inspect the vector axes of particle displacement and wave propagation before classifying a wave as transverse or longitudinal.

  • Remember that both transverse and longitudinal harmonic waves are expressed mathematically using sine or cosine functions.

Lock it in

Similar question

01

A medium element in a sound wave oscillates with amplitude A=1.00×10−6 mA = 1.00\times 10^{-6}\text{ m}. If its maximum acceleration is amax=1.58×102 m/s2a_{\text{max}} = 1.58\times 10^2\text{ m/s}^2, find its oscillation frequency ff.

Answer

f=2.00×103 Hzf = 2.00\times 10^3\text{ Hz}. Using amax=(2πf)2Aa_{\text{max}} = (2\pi f)^2 A, we get ω=amaxA=1.58×1021.00×10−6≈1.257×104 rad/s\omega = \sqrt{\frac{a_{\text{max}}}{A}} = \sqrt{\frac{1.58\times 10^2}{1.00\times 10^{-6}}} \approx 1.257\times 10^4\text{ rad/s}, so f=ω2π≈2.00×103 Hzf = \frac{\omega}{2\pi} \approx 2.00\times 10^3\text{ Hz}.

02

A sinusoidal wave with frequency f=500 Hzf = 500\text{ Hz} propagates with speed v=340 m/sv = 340\text{ m/s}. The maximum particle acceleration is measured to be amax=9.87×104 m/s2a_{\text{max}} = 9.87\times 10^4\text{ m/s}^2. Calculate (a) the displacement amplitude ξ0\xi_0 and (b) the wavelength λ\lambda.

Answer

(a) ξ0=1.00×10−2 m\xi_0 = 1.00\times 10^{-2}\text{ m}; (b) λ=0.680 m\lambda = 0.680\text{ m}. Key steps: ω=2π(500)=1000π rad/s\omega = 2\pi(500) = 1000\pi\text{ rad/s}. From amax=ω2ξ0a_{\text{max}} = \omega^2 \xi_0, ξ0=9.87×104(1000π)2≈1.00×10−2 m\xi_0 = \frac{9.87\times 10^4}{(1000\pi)^2} \approx 1.00\times 10^{-2}\text{ m}. Then λ=vf=340500=0.680 m\lambda = \frac{v}{f} = \frac{340}{500} = 0.680\text{ m}.

03

In a traveling longitudinal wave, a detector registers a maximum particle speed of vmax=0.50 m/sv_{\text{max}} = 0.50\text{ m/s} and a maximum particle acceleration of amax=2.0×103 m/s2a_{\text{max}} = 2.0\times 10^3\text{ m/s}^2. If the wave propagation speed is vwave=1200 m/sv_{\text{wave}} = 1200\text{ m/s}, find the wave's angular frequency ω\omega, displacement amplitude ξ0\xi_0, and wavelength λ\lambda.

Answer

ω=4.0×103 rad/s\omega = 4.0\times 10^3\text{ rad/s}, ξ0=1.25×10−4 m\xi_0 = 1.25\times 10^{-4}\text{ m}, and λ=1.88 m\lambda = 1.88\text{ m}. Key steps: since amax=ω2ξ0a_{\text{max}} = \omega^2 \xi_0 and vmax=ωξ0v_{\text{max}} = \omega \xi_0, dividing gives ω=amaxvmax=20000.50=4000 rad/s\omega = \frac{a_{\text{max}}}{v_{\text{max}}} = \frac{2000}{0.50} = 4000\text{ rad/s}. Then ξ0=vmaxω=0.504000=1.25×10−4 m\xi_0 = \frac{v_{\text{max}}}{\omega} = \frac{0.50}{4000} = 1.25\times 10^{-4}\text{ m}. Finally, f=ω2π=2000π Hzf = \frac{\omega}{2\pi} = \frac{2000}{\pi}\text{ Hz}, so λ=vwavef=1200π2000=0.6π≈1.88 m\lambda = \frac{v_{\text{wave}}}{f} = \frac{1200 \pi}{2000} = 0.6\pi \approx 1.88\text{ m}.

Loading workspace…