Resources
Dry air undergoes electrical breakdown (spark discharge) when the local electric-field strength reaches the threshold limit of . A spherical Van de Graaff generator terminal has a radius of and is charged to the maximum possible value before dielectric breakdown of the surrounding air occurs. Calculate the critical threshold charge that can reside on the sphere. Use .
Answer and steps
Final answer
Steps
Identify the relationship for the electric field at the surface
A spherical conducting terminal distributes its excess charge uniformly over its outer surface. By Gauss's Law, the electric field outside and on the surface of a uniformly charged sphere is identical to that of a point charge located at the sphere's center:
The electric-field strength is greatest right at the surface () because the distance from the center is at its minimum:
Relate maximum electric field to dielectric breakdown
Air breaks down when the field at the sphere's surface reaches the breakdown threshold, . Setting gives:
Rearranging to solve for the maximum charge :
Common Pitfall: Using the diameter instead of the radius, or forgetting to square the radius in Coulomb's constant formula, will lead to an incorrect order of magnitude.
Substitute the given values
Substitute , , and :
Calculate the numerator:
Now divide by :
Expressed in microcoulombs ():
Typical errors
01 The student confuses the electric field formula with the electric potential formula and uses E = k * q / R instead of k * q / R², resulting in q_max = 5.01 × 10⁻⁵ C.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The electric field outside and on the surface of a conducting sphere follows Coulomb's inverse-square law, . The expression gives the electric potential , not the electric field .
- Step 2Correct
Your substitution followed your formula from Step 1, but the radius must be squared.
- Step 3Correct
Because was not squared in the numerator, your result was too large by a factor of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that dielectric breakdown occurs at the sphere's surface where the electric field reaches .
You correctly isolated the unknown charge algebraically from your initial equation.
You accurately substituted the given numerical values and carried out the arithmetic without calculation slips.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the formula for electric field strength () with the formula for electric potential (). Electric field follows an inverse-square law with units of or , whereas electric potential is inversely proportional to distance with units of .
REASONING PATH
Your ACEpath teacher’s suggested approach- Electric Field vs. Potential Dependence
For a spherical shell or point charge, (inverse-square) and (inverse-linear).
Check that any formula representing electric-field strength contains distance squared in the denominator.
- Dimensional / Unit Verification
Electric field has units of . Since , dividing by another factor of distance gives .
Verify units: , whereas .
CORRECTED PATH
ACEpath Teacher's Demonstration02 The student forgets to square the radius when calculating R² in the denominator, resulting in q_max = 5.01 × 10⁻⁵ C.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You wrote and substituted in place of . The given radius is , so you need to square this value: .
- Step 3Correct
Your arithmetic correctly evaluated the expression you wrote, but the value is incorrect because it inherited the unsquared radius from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou recognized that dielectric breakdown occurs at the sphere's surface where the electric field is strongest.
You used Gauss's Law / Coulomb's Law relationship correctly.
You algebraically rearranged the equation to solve for with no algebraic mistakes.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou labeled instead of calculating , treating the given radius as if it were already squared.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisLosing track of the exponent when transitioning from symbolic formulas to numerical values. When a formula contains a squared variable like , writing the substitution with explicit parentheses, such as , prevents confusing the base value with the evaluated term .
REASONING PATH
Your ACEpath teacher’s suggested approach- Check powers during substitution
If a symbolic formula contains , always substitute with explicit outer parentheses before evaluating.
Write explicitly on paper before performing any division or multiplication.
CORRECTED PATH
ACEpath Teacher's DemonstrationCompute the square of the radius: .
Substitute into : .
Multiply the numerator: .
Divide by Coulomb's constant: .
03 The student inverts the formula when solving for charge, writing q_max = k * R² / E_break instead of E_break * R² / k.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
When isolating , you multiplied by correctly, but you divided by and multiplied by instead of dividing both sides by .
- Step 3Correct
You correctly substituted the numerical values into your rearranged expression, but the calculation inherits the inverted algebraic expression.
- Step 4Correct
Because of the earlier inversion, your calculated value is off by many orders of magnitude; an electrostatic charge of is physically enormous.
WHAT YOU DID WELL
Compliments from Your TeacherYou selected the correct formula for the electric field at the surface of a uniformly charged conducting sphere.
You accurately substituted the given numerical parameters into your symbolic formula.
You performed the arithmetic evaluation of your written expression accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou accidentally placed in the numerator and in the denominator when solving for .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing multiplication and division operations during multi-factor algebraic rearrangement, leading to reciprocal factors.
REASONING PATH
Your ACEpath teacher’s suggested approach- Two-step algebraic isolation
To solve , first clear the denominator: . Then divide by the unwanted factor: .
Multiply both sides of by to get , then divide both sides by to get .
- Physical reasonableness check
Typical static electric charges in laboratory apparatus are on the order of microcoulombs () or nanocoulombs ().
A calculated charge of tens of coulombs () should immediately alert you to check for an inverted factor like .
CORRECTED PATH
ACEpath Teacher's DemonstrationMultiply both sides by :
Divide both sides by :
Substitute the given numbers:
Evaluate the numerator:
Divide by :
Lock it in
What is the relationship for the electric-field strength just outside a uniformly charged conducting sphere of radius and total charge ?
. Electric field obeys an inverse-square law, decaying as .
Similar question
A small metal sphere of radius is held in air with a dielectric breakdown strength of . What is the maximum charge that can be placed on the sphere without causing air breakdown? Use .
Answer
.
Key steps:
- Apply .
- Solve for .
- Substitute values: .
A conducting sphere with radius carries a maximum surface electric field of . If the charge on the sphere is kept constant but its radius is compressed to , what is the new electric-field strength at the new surface?
Answer
.
Key steps:
- Since , holding charge constant means .
- Ratio: .
- Calculate: .
A Van de Graaff terminal has radius . When charged to its breakdown limit where , determine: (a) the maximum charge , and (b) the electric potential of the terminal relative to infinity. Use .
Answer
(a) ; (b) .
Key steps:
- For charge: .
- For potential: .