Resources

A high-precision biomedical micro-electrode has an active cylindrical channel through which an aqueous physiological saline solution flows. In an experiment, an applied potential difference of ΔV=85.0 mV\Delta V = 85.0\text{ mV} drives a steady ionic current of I=340 μAI = 340\ \mu\text{A}. (a) Convert ΔV\Delta V to volts (V\text{V}) and II to amperes (A\text{A}), then determine the electrical resistance RR of the micro-electrode channel in standard ohms (Ω\Omega). (b) Express the calculated resistance in kilo-ohms (kΩ\text{k}\Omega). (c) Over a sampling duration of Δt=2.00 ms\Delta t = 2.00\text{ ms}, determine the net charge Δq\Delta q transferred across the channel in nanocoulombs (nC\text{nC}).

Answer and steps

Final answer

(a) ΔV=0.0850 V\Delta V = 0.0850\text{ V}, I=3.40×10−4 AI = 3.40 \times 10^{-4}\text{ A}, yielding R=250 ΩR = 250\ \Omega; (b) R=0.250 kΩR = 0.250\text{ k}\Omega; (c) Δq=0.680 nC\Delta q = 0.680\text{ nC} (or 6.80×10−1 nC6.80 \times 10^{-1}\text{ nC})

Steps

Part (a): Conversion to SI Units and Resistance Calculation

  1. Convert Potential Difference (ΔV\Delta V) and Current (II) to Base Units:

    • The prefix milli- (m\text{m}) represents a factor of 10−310^{-3}: ΔV=85.0 mV=85.0×10−3 V=0.0850 V\Delta V = 85.0\text{ mV} = 85.0 \times 10^{-3}\text{ V} = 0.0850\text{ V}
    • The prefix micro- (μ\mu) represents a factor of 10−610^{-6}: I=340 μA=340×10−6 A=3.40×10−4 AI = 340\ \mu\text{A} = 340 \times 10^{-6}\text{ A} = 3.40 \times 10^{-4}\text{ A}
  2. Calculate the Resistance (RR):

    • According to Ohm's law, resistance is defined as the ratio of the potential difference to the current: R=ΔVIR = \frac{\Delta V}{I}
    • Substitute the values in standard SI units: R=0.0850 V3.40×10−4 A=250 ΩR = \frac{0.0850\text{ V}}{3.40 \times 10^{-4}\text{ A}} = 250\ \Omega

Part (b): Expressing Resistance in Kilo-ohms (kΩ\text{k}\Omega)

  • The prefix kilo- (k\text{k}) corresponds to 10310^3 (or 10001000 base units): 1 kΩ=1000 Ω1\text{ k}\Omega = 1000\ \Omega
  • Dividing the resistance in ohms by 10001000: R=250 Ω1000 Ω/kΩ=0.250 kΩR = \frac{250\ \Omega}{1000\ \Omega/\text{k}\Omega} = 0.250\text{ k}\Omega

Part (c): Determining the Transferred Charge (Δq\Delta q)

  1. Convert Time Duration to Seconds: Δt=2.00 ms=2.00×10−3 s\Delta t = 2.00\text{ ms} = 2.00 \times 10^{-3}\text{ s}
  2. Calculate Net Charge:

    • Electric current represents the rate of charge flow, I=ΔqΔtI = \frac{\Delta q}{\Delta t}. Rearranging gives: Δq=I⋅Δt\Delta q = I \cdot \Delta t
    • Substitute the known values: Δq=(3.40×10−4 A)⋅(2.00×10−3 s)=6.80×10−7 C\Delta q = (3.40 \times 10^{-4}\text{ A}) \cdot (2.00 \times 10^{-3}\text{ s}) = 6.80 \times 10^{-7}\text{ C}
  3. Convert to the Required Nanocoulomb Form:

    • Expressing this result in the requested benchmark form: Δq=0.680 nC(or 6.80×10−1 nC)\Delta q = 0.680\text{ nC}\quad (\text{or } 6.80 \times 10^{-1}\text{ nC})

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the metric prefix micro (10⁻⁶) with milli (10⁻³), leading to an incorrect current value and an underestimated resistance.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔV=85.0×10−3 V=0.0850 V\Delta V = 85.0 \times 10^{-3}\text{ V} = 0.0850\text{ V} ⟹\Longrightarrow I=340×10−3 A=0.340 AI = 340 \times 10^{-3}\text{ A} = 0.340\text{ A}

    Correct

    ΔV=85.0×10−3 V=0.0850 V\Delta V = 85.0 \times 10^{-3}\text{ V} = 0.0850\text{ V} and I=340 μA=340×10−6 A=3.40×10−4 AI = 340\ \mu\text{A} = 340 \times 10^{-6}\text{ A} = 3.40 \times 10^{-4}\text{ A}

    You converted ΔV\Delta V from millivolts to volts accurately. However, for current II, the prefix micro (μ\mu) represents 10−610^{-6}, not 10−310^{-3}.

  2. Step 2

    R=ΔVI=0.08500.340=0.25 ΩR = \frac{\Delta V}{I} = \frac{0.0850}{0.340} = 0.25\ \Omega

    Correct

    R=ΔVI=0.0850 V3.40×10−4 A=250 ΩR = \frac{\Delta V}{I} = \frac{0.0850\text{ V}}{3.40 \times 10^{-4}\text{ A}} = 250\ \Omega

    You correctly recalled and applied Ohm's law, but using the incorrect current value of 0.340 A0.340\text{ A} instead of 3.40×10−4 A3.40 \times 10^{-4}\text{ A} underestimated the resistance by a factor of 10001000.

  3. Step 3

    R=0.251000=0.00025 kΩR = \frac{0.25}{1000} = 0.00025\text{ k}\Omega

    Correct

    R=250 Ω1000 Ω/kΩ=0.250 kΩR = \frac{250\ \Omega}{1000\ \Omega/\text{k}\Omega} = 0.250\text{ k}\Omega

    You correctly divided by 10001000 to convert from ohms to kilo-ohms, but the value was carried over from the earlier current error.

  4. Step 4

    Δt=2.00×10−3 s⟹Δq=I⋅Δt=0.340⋅(2.00×10−3)=6.80×10−4 C=680000 nC\Delta t = 2.00 \times 10^{-3}\text{ s} \Longrightarrow \Delta q = I \cdot \Delta t = 0.340 \cdot (2.00 \times 10^{-3}) = 6.80 \times 10^{-4}\text{ C} = 680000\text{ nC}

    Correct

    Δq=I⋅Δt=(3.40×10−4 A)⋅(2.00×10−3 s)=6.80×10−7 C=0.680 nC\Delta q = I \cdot \Delta t = (3.40 \times 10^{-4}\text{ A}) \cdot (2.00 \times 10^{-3}\text{ s}) = 6.80 \times 10^{-7}\text{ C} = 0.680\text{ nC}

    You correctly converted milliseconds to seconds and correctly applied Δq=I⋅Δt\Delta q = I \cdot \Delta t, but the calculation inherited the incorrect current value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted millivolts to standard volts using the factor 10−310^{-3}.

You chose and arranged the correct governing formulas, R=ΔVIR = \frac{\Delta V}{I} and Δq=I⋅Δt\Delta q = I \cdot \Delta t.

You correctly converted between standard ohms and kilo-ohms by dividing by 10001000.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix confusion (micro vs. milli)

You substituted 10−310^{-3} instead of 10−610^{-6} for the prefix micro (μ\mu).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the SI prefix milli- (10−310^{-3}) with micro- (10−610^{-6}), leading to an assigned current value that was 10001000 times too large.

REASONING PATH
Your ACEpath teacher’s suggested approach
SI Prefix Table: Micro vs. Milli
  • m=10−3\text{m} = 10^{-3} (milli), whereas μ=10−6\mu = 10^{-6} (micro) and n=10−9\text{n} = 10^{-9} (nano).

  • Always pause when you see the Greek letter μ\mu and write 10−610^{-6} before proceeding with calculations.

Unit Scaling Sanity Check
  • A smaller current (340 μA340\ \mu\text{A}) driven by millivolts must yield a resistance in hundreds of ohms, not a fraction of an ohm.

  • Estimate the power of ten: 10−2 V10−4 A≈102 Ω=100 Ω\frac{10^{-2}\text{ V}}{10^{-4}\text{ A}} \approx 10^2\ \Omega = 100\ \Omega.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert current: I=340 μA=340×10−6 A=3.40×10−4 AI = 340\ \mu\text{A} = 340 \times 10^{-6}\text{ A} = 3.40 \times 10^{-4}\text{ A}.

  2. Compute resistance in ohms: R=ΔVI=0.0850 V3.40×10−4 A=250 ΩR = \frac{\Delta V}{I} = \frac{0.0850\text{ V}}{3.40 \times 10^{-4}\text{ A}} = 250\ \Omega.

  3. Convert resistance to kilo-ohms: R=250 Ω1000 Ω/kΩ=0.250 kΩR = \frac{250\ \Omega}{1000\ \Omega/\text{k}\Omega} = 0.250\text{ k}\Omega.

  4. Compute net charge in nanocoulombs: Δq=(3.40×10−4 A)(2.00×10−3 s)=6.80×10−7 C=0.680 nC\Delta q = (3.40 \times 10^{-4}\text{ A})(2.00 \times 10^{-3}\text{ s}) = 6.80 \times 10^{-7}\text{ C} = 0.680\text{ nC}.

Final answer

(a) ΔV=0.0850 V\Delta V = 0.0850\text{ V}, I=3.40×10−4 AI = 3.40 \times 10^{-4}\text{ A}, R=250 ΩR = 250\ \Omega; (b) R=0.250 kΩR = 0.250\text{ k}\Omega; (c) Δq=0.680 nC\Delta q = 0.680\text{ nC}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review common SI prefixes in steps of 10310^3: kilo (10310^3), milli (10−310^{-3}), micro (10−610^{-6}), and nano (10−910^{-9}).

  • Practice converting values given with prefixes directly into scientific notation before inserting them into formulas.

  • Perform an order-of-magnitude check on your final answers to catch factor-of-1000 slips.

OverviewACEpath Teacher's Diagnosis

02 The student inverts Ohm's law as R = I / ΔV, resulting in an incorrect resistance of 0.0040 Ω.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔV=85.0×10−3 V=0.0850 V  ⟹  I=340×10−6 A=0.000340 A\Delta V = 85.0 \times 10^{-3}\text{ V} = 0.0850\text{ V} \implies I = 340 \times 10^{-6}\text{ A} = 0.000340\text{ A}

  2. Step 2

    R=IΔV=0.0003400.0850=0.0040 ΩR = \frac{I}{\Delta V} = \frac{0.000340}{0.0850} = 0.0040\ \Omega

    Correct

    R=ΔVI=0.0850 V3.40×10−4 A=250 ΩR = \frac{\Delta V}{I} = \frac{0.0850\text{ V}}{3.40 \times 10^{-4}\text{ A}} = 250\ \Omega

    You inverted the formula for resistance. Ohm's law relates potential difference, current, and resistance as ΔV=IR\Delta V = I R, which rearranges to R=ΔVIR = \frac{\Delta V}{I}, not R=IΔVR = \frac{I}{\Delta V}.

  3. Step 3

    R=0.00401000=0.0000040 kΩR = \frac{0.0040}{1000} = 0.0000040\text{ k}\Omega

    Correct

    R=250 Ω1000 Ω/kΩ=0.250 kΩR = \frac{250\ \Omega}{1000\ \Omega/\text{k}\Omega} = 0.250\text{ k}\Omega

    Your conversion procedure of dividing the resistance by 10001000 to get kilo-ohms was correct, but the result was affected by the incorrect resistance value from part (a).

  4. Step 4

    Δt=2.00×10−3 s  ⟹  Δq=I⋅Δt=(340×10−6)⋅(2.00×10−3)=6.80×10−7 C=680 nC\Delta t = 2.00 \times 10^{-3}\text{ s} \implies \Delta q = I \cdot \Delta t = (340 \times 10^{-6}) \cdot (2.00 \times 10^{-3}) = 6.80 \times 10^{-7}\text{ C} = 680\text{ nC}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted all quantities into standard SI units using metric prefixes.

You correctly applied the relationship Δq=IΔt\Delta q = I \Delta t to find the transferred charge.

You correctly converted electrical resistance between ohms and kilo-ohms by dividing by 10001000.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Inversion Error

You accidentally swapped the numerator and denominator when rearranging Ohm's law, solving for conductance (G=IΔVG = \frac{I}{\Delta V}) rather than resistance (R=ΔVIR = \frac{\Delta V}{I}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the algebraic definition of electrical resistance (R=ΔVIR = \frac{\Delta V}{I}) with electrical conductance (G=IΔVG = \frac{I}{\Delta V}), or rushing the algebraic rearrangement of ΔV=IR\Delta V = I R.

REASONING PATH
Your ACEpath teacher’s suggested approach
Recall the Base Form of Ohm's Law
  • Voltage drives current against resistance: ΔV=IR\Delta V = I R.

  • Always write the base equation ΔV=IR\Delta V = I R first before isolating the target variable.

Isolate Resistance Algebraically
  • Dividing both sides of ΔV=IR\Delta V = I R by II yields R=ΔVIR = \frac{\Delta V}{I}.

  • Check your units: 1 Ω=1 V/A1\ \Omega = 1\text{ V}/\text{A}. If your formula has amperes in the numerator, it gives siemens (conductance), not ohms.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply Ohm's law with potential difference in the numerator: R=ΔVI=0.0850 V3.40×10−4 A=250 ΩR = \frac{\Delta V}{I} = \frac{0.0850\text{ V}}{3.40 \times 10^{-4}\text{ A}} = 250\ \Omega.

  2. Convert this resistance to kilo-ohms: R=250 Ω1000 Ω/kΩ=0.250 kΩR = \frac{250\ \Omega}{1000\ \Omega/\text{k}\Omega} = 0.250\text{ k}\Omega.

Final answer

(a) ΔV=0.0850 V\Delta V = 0.0850\text{ V}, I=3.40×10−4 AI = 3.40 \times 10^{-4}\text{ A}, R=250 ΩR = 250\ \Omega; (b) R=0.250 kΩR = 0.250\text{ k}\Omega; (c) Δq=680 nC\Delta q = 680\text{ nC}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the Ohm's law triangle with ΔV\Delta V on top and II, RR on the bottom to quickly confirm that R=ΔVIR = \frac{\Delta V}{I}.

  • Perform unit checks on isolated formulas to ensure volts per ampere (V/A\text{V}/\text{A}) equals ohms (Ω\Omega).

  • Practice rearranging three-variable physics formulas before plugging in numerical values.

OverviewACEpath Teacher's Diagnosis

03 The student divides current by time instead of multiplying to find transferred charge, calculating Δq = I / Δt = 170 nC.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔV=85.0×10−3 V=0.0850 V\Delta V = 85.0 \times 10^{-3}\text{ V} = 0.0850\text{ V} ⟹ I=340×10−6 A=0.000340 AI = 340 \times 10^{-6}\text{ A} = 0.000340\text{ A} ⟹ R=ΔVI=0.08500.000340=250 ΩR = \frac{\Delta V}{I} = \frac{0.0850}{0.000340} = 250\ \Omega

  2. Step 2

    R=2501000=0.250 kΩR = \frac{250}{1000} = 0.250\text{ k}\Omega

  3. Step 3

    Δt=2.00×10−3 s\Delta t = 2.00 \times 10^{-3}\text{ s} ⟹ Δq=IΔt=340×10−62.00×10−3=0.17 C=1.7×108 nC\Delta q = \frac{I}{\Delta t} = \frac{340 \times 10^{-6}}{2.00 \times 10^{-3}} = 0.17\text{ C} = 1.7 \times 10^8\text{ nC}

    Correct

    Δq=I⋅Δt=(340×10−6 A)⋅(2.00×10−3 s)=6.80×10−7 C=0.680 nC\Delta q = I \cdot \Delta t = (340 \times 10^{-6}\text{ A}) \cdot (2.00 \times 10^{-3}\text{ s}) = 6.80 \times 10^{-7}\text{ C} = 0.680\text{ nC}

    You divided current by time instead of multiplying them. Because current is the rate of charge flow (I=ΔqΔtI = \frac{\Delta q}{\Delta t}), total charge transferred is Δq=I⋅Δt\Delta q = I \cdot \Delta t.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied metric prefix conversions for milli- (10−310^{-3}) and micro- (10−610^{-6}).

You correctly recalled and calculated channel resistance using Ohm's law, R=ΔVIR = \frac{\Delta V}{I}.

You successfully converted ohms to kilo-ohms.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula rearrangement error

You set up Δq=IΔt\Delta q = \frac{I}{\Delta t} rather than Δq=I⋅Δt\Delta q = I \cdot \Delta t.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the rate definition I=ΔqΔtI = \frac{\Delta q}{\Delta t} when solving for the numerator Δq\Delta q, treating current as a quantity to be divided by elapsed time rather than accumulated over time.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional and Unit Consistency
  • 1 A=1 C/s1\text{ A} = 1\text{ C/s}, so Charge (C)=Current (C/s)×Time (s)\text{Charge (C)} = \text{Current (C/s)} \times \text{Time (s)}.

  • Always verify that your isolated variable matches the unit product: dividing current by time yields A/s=C/s2\text{A/s} = \text{C/s}^2, not Coulombs.

Algebraic Isolation of Numerators
  • If y=xzy = \frac{x}{z}, multiplying both sides by zz yields x=y⋅zx = y \cdot z.

  • Isolate the numerator by multiplying the rate by time rather than dividing.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the definition of electric current: I=ΔqΔtI = \frac{\Delta q}{\Delta t}.

  2. Multiply both sides by Δt\Delta t to isolate the transferred charge: Δq=I⋅Δt\Delta q = I \cdot \Delta t.

  3. Substitute I=3.40×10−4 AI = 3.40 \times 10^{-4}\text{ A} and Δt=2.00×10−3 s\Delta t = 2.00 \times 10^{-3}\text{ s}: Δq=(3.40×10−4 A)(2.00×10−3 s)=6.80×10−7 C\Delta q = (3.40 \times 10^{-4}\text{ A})(2.00 \times 10^{-3}\text{ s}) = 6.80 \times 10^{-7}\text{ C}.

  4. Convert coulombs to nanocoulombs (1 nC=10−9 C1\text{ nC} = 10^{-9}\text{ C}): Δq=6.80×10−7 C10−9 C/nC=0.680 nC\Delta q = \frac{6.80 \times 10^{-7}\text{ C}}{10^{-9}\text{ C/nC}} = 0.680\text{ nC}.

Final answer

Δq=0.680 nC\Delta q = 0.680\text{ nC} (or 6.80×10−1 nC6.80 \times 10^{-1}\text{ nC})

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice rearranging rate equations (I=qtI = \frac{q}{t}, v=dtv = \frac{d}{t}) to reinforce isolating numerators via multiplication.

  • Check your units at each calculation step: verify that A⋅s=C\text{A} \cdot \text{s} = \text{C}.

Lock it in

Similar question

01

A biosensor channel has a potential difference of ΔV=120 mV\Delta V = 120\text{ mV} across it, resulting in a current of I=60.0 μAI = 60.0\ \mu\text{A}. Calculate its resistance RR in ohms (Ω\Omega) and in kilo-ohms (kΩ\text{k}\Omega).

Answer

R=2000 Ω=2.00 kΩR = 2000\ \Omega = 2.00\text{ k}\Omega. Key steps: ΔV=0.120 V\Delta V = 0.120\text{ V}, I=6.00×10−5 AI = 6.00 \times 10^{-5}\text{ A}, R=0.120 V6.00×10−5 A=2000 ΩR = \frac{0.120\text{ V}}{6.00 \times 10^{-5}\text{ A}} = 2000\ \Omega.

02

A steady current of I=450 μAI = 450\ \mu\text{A} flows through a patch-clamp pipette for a duration of Δt=4.00 ms\Delta t = 4.00\text{ ms}. Determine the total charge Δq\Delta q transferred, expressing your answer in nanocoulombs (nC\text{nC}).

Answer

Δq=1.80 nC\Delta q = 1.80\text{ nC}. Key steps: I=4.50×10−4 AI = 4.50 \times 10^{-4}\text{ A}, Δt=4.00×10−3 s\Delta t = 4.00 \times 10^{-3}\text{ s}, Δq=IΔt=1.80×10−6 C=1800 nC\Delta q = I \Delta t = 1.80 \times 10^{-6}\text{ C} = 1800\text{ nC} (or 1.80 μC1.80\ \mu\text{C}).

03

An intracellular electrode with resistance R=1.25 MΩR = 1.25\text{ M}\Omega (mega-ohms) has a measured potential difference of ΔV=50.0 mV\Delta V = 50.0\text{ mV}. Determine the current II through the electrode in nanoamperes (nA\text{nA}).

Answer

I=40.0 nAI = 40.0\text{ nA}. Key steps: ΔV=5.00×10−2 V\Delta V = 5.00 \times 10^{-2}\text{ V}, R=1.25×106 ΩR = 1.25 \times 10^6\ \Omega, I=ΔVR=5.00×10−21.25×106=4.00×10−8 A=40.0 nAI = \frac{\Delta V}{R} = \frac{5.00 \times 10^{-2}}{1.25 \times 10^6} = 4.00 \times 10^{-8}\text{ A} = 40.0\text{ nA}.

Loading workspace…