Resources

A physics student uses a motion sensor placed on the floor to track a small ball moving strictly along a vertical coordinate axis where the downward direction is defined as positive (+y+y points downward toward the floor), with the sensor at the origin y=0.0 my = 0.0\text{ m}. At t=0.0 st = 0.0\text{ s}, the ball is located at y=4.5 my = 4.5\text{ m} (above the sensor) and moving upward (away from the sensor). From t=0.0 st = 0.0\text{ s} to t=3.0 st = 3.0\text{ s}, the position-time graph shows a linear decline from y=4.5 my = 4.5\text{ m} to y=0.9 my = 0.9\text{ m}. From t=3.0 st = 3.0\text{ s} to t=5.0 st = 5.0\text{ s}, the position rises linearly from y=0.9 my = 0.9\text{ m} to y=3.7 my = 3.7\text{ m}. In this specific downward-positive coordinate frame: (a) calculate the velocity of the ball during the first interval (0.0 s0.0\text{ s} to 3.0 s3.0\text{ s}), (b) state whether the ball's actual physical motion is upward or downward during this first interval, and (c) find the total displacement vector Δy\Delta y over the complete 5.0 s5.0\text{ s} interval.

Answer and steps

Final answer

(a) v1=−1.2 m/sv_1 = -1.2\text{ m/s}; (b) Upward (away from the floor sensor); (c) Δy=−0.80 m\Delta y = -0.80\text{ m}

Steps

Part (a): Velocity During the First Interval

  1. Identify the Given Coordinates and Times

    • Initial time: t1=0.0 st_1 = 0.0\text{ s}, initial position: y1=4.5 my_1 = 4.5\text{ m}
    • Final time for this segment: t2=3.0 st_2 = 3.0\text{ s}, final position: y2=0.9 my_2 = 0.9\text{ m}
  2. Apply the Definition of Average Velocity Since the position-time graph is linear, the velocity is constant and equals the slope of the line: v1=ΔyΔt=y2−y1t2−t1v_1 = \frac{\Delta y}{\Delta t} = \frac{y_2 - y_1}{t_2 - t_1}
  3. Calculate the Value v1=0.9 m−4.5 m3.0 s−0.0 s=−3.6 m3.0 s=−1.2 m/sv_1 = \frac{0.9\text{ m} - 4.5\text{ m}}{3.0\text{ s} - 0.0\text{ s}} = \frac{-3.6\text{ m}}{3.0\text{ s}} = -1.2\text{ m/s}

Part (b): Physical Direction of Motion

  1. Interpret the Coordinate System

    • The problem explicitly defines the downward direction as positive (+y+y).
    • Consequently, the upward direction corresponds to the negative direction (−y-y).
  2. Connect Sign to Physical Direction

    • The calculated velocity is negative (v1=−1.2 m/sv_1 = -1.2\text{ m/s}), and the position values are decreasing (4.5 m→0.9 m4.5\text{ m} \to 0.9\text{ m}).
    • Therefore, the ball is traveling in the negative coordinate direction, which corresponds to physical upward motion (away from the floor sensor).

Common Pitfall: In physics problems, do not automatically assume that "up is positive." Always check the defined coordinate axis. When +y+y points downward, a negative velocity indicates upward motion, not downward motion.


Part (c): Total Displacement Over the Complete Interval

  1. Recall the Definition of Displacement Displacement depends only on the initial and final positions of the entire motion, regardless of the path taken: Δy=yfinal−yinitial\Delta y = y_{\text{final}} - y_{\text{initial}}
  2. Substitute the Overall Start and End Points

    • At t=0.0 st = 0.0\text{ s}: yinitial=4.5 my_{\text{initial}} = 4.5\text{ m}
    • At t=5.0 st = 5.0\text{ s}: yfinal=3.7 my_{\text{final}} = 3.7\text{ m}
  3. Compute the Total Displacement Δy=3.7 m−4.5 m=−0.80 m\Delta y = 3.7\text{ m} - 4.5\text{ m} = -0.80\text{ m}

    The negative sign confirms that the net change in position is 0.80 m0.80\text{ m} in the upward direction.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates displacement and velocity using initial position minus final position, reversing the sign of velocity and displacement.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v=y1−y2Δt⟹v=4.5 m−0.9 m3.0 s=3.6 m3.0 s⟹v=1.2 m/sv = \frac{y_1 - y_2}{\Delta t} \Longrightarrow v = \frac{4.5\text{ m} - 0.9\text{ m}}{3.0\text{ s}} = \frac{3.6\text{ m}}{3.0\text{ s}} \Longrightarrow v = 1.2\text{ m/s}

    Correct

    v=y2−y1Δt=0.9 m−4.5 m3.0 s−0.0 s=−1.2 m/sv = \frac{y_2 - y_1}{\Delta t} = \frac{0.9\text{ m} - 4.5\text{ m}}{3.0\text{ s} - 0.0\text{ s}} = -1.2\text{ m/s}

    Average velocity is defined by the change in position divided by elapsed time, where Δy=y2−y1\Delta y = y_2 - y_1 (final minus initial). Subtracting y1−y2y_1 - y_2 reversed the sign from negative to positive.

  2. Step 2

    Upward\text{Upward}

  3. Step 3

    Δy=yinitial−yfinal=4.5 m−3.7 m⟹Δy=0.8 m\Delta y = y_{\text{initial}} - y_{\text{final}} = 4.5\text{ m} - 3.7\text{ m} \Longrightarrow \Delta y = 0.8\text{ m}

    Correct

    Δy=yfinal−yinitial=3.7 m−4.5 m=−0.80 m\Delta y = y_{\text{final}} - y_{\text{initial}} = 3.7\text{ m} - 4.5\text{ m} = -0.80\text{ m}

    Displacement is defined as Δy=yfinal−yinitial\Delta y = y_{\text{final}} - y_{\text{initial}}. Because the ball ends at y=3.7 my = 3.7\text{ m} after starting at y=4.5 my = 4.5\text{ m}, the displacement vector must be negative: Δy=−0.80 m\Delta y = -0.80\text{ m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly interpreted the physical direction of motion as upward despite the downward-positive axis.

You correctly identified the relevant initial and final coordinates for both time intervals.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed Delta Definition

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You defined change (Δ\Delta) as initial−final\text{initial} - \text{final} instead of the standard vector definition final−initial\text{final} - \text{initial}, causing both Δy\Delta y and velocity to have opposite algebraic signs.

REASONING PATH
Your ACEpath teacher’s suggested approach
Standard Definition of Delta
  • In physics and calculus, any change Δu\Delta u is always defined as ufinal−uinitialu_{\text{final}} - u_{\text{initial}}.

  • Always write Δy=yf−yi\Delta y = y_f - y_i before substituting numerical coordinates.

Coordinate Sign vs. Physical Direction
  • When a coordinate axis is defined with a non-standard direction (such as +y+y downward), vector quantities carrying a negative sign correspond to the opposite physical direction (upward).

  • Preserve the calculated negative sign in vector results (v=−1.2 m/sv = -1.2\text{ m/s}, Δy=−0.80 m\Delta y = -0.80\text{ m}) instead of taking absolute values or swapping subtraction order.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the correct definition of average velocity: v1=y(3.0)−y(0.0)3.0 s−0.0 sv_1 = \frac{y(3.0) - y(0.0)}{3.0\text{ s} - 0.0\text{ s}}

  2. Substitute coordinates: v1=0.9 m−4.5 m3.0 s=−1.2 m/sv_1 = \frac{0.9\text{ m} - 4.5\text{ m}}{3.0\text{ s}} = -1.2\text{ m/s}

  3. Apply the standard displacement formula for the full interval: Δy=y(5.0)−y(0.0)=3.7 m−4.5 m=−0.80 m\Delta y = y(5.0) - y(0.0) = 3.7\text{ m} - 4.5\text{ m} = -0.80\text{ m}

Final answer

(a) v1=−1.2 m/sv_1 = -1.2\text{ m/s}; (b) Upward; (c) Δy=−0.80 m\Delta y = -0.80\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize that change is always final minus initial: Δ=final−initial\Delta = \text{final} - \text{initial}.

  • Practice calculating 1D kinematics quantities in non-traditional coordinate frames (e.g., left-positive or down-positive).

OverviewACEpath Teacher's Diagnosis

02 The student assumes that a negative velocity in 1D kinematics always corresponds to downward motion regardless of the chosen coordinate axis.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v=0.9 m−4.5 m3.0 s−0.0 s=−3.6 m3.0 s  ⟹  v=−1.2 m/sv = \frac{0.9\text{ m} - 4.5\text{ m}}{3.0\text{ s} - 0.0\text{ s}} = \frac{-3.6\text{ m}}{3.0\text{ s}} \implies v = -1.2\text{ m/s}

  2. Step 2

    Because velocity is negative, the motion is downward. Downward

    Correct

    Upward (away from the floor sensor)

    In this problem, the coordinate system defines downward as the positive direction (+y+y). Therefore, a negative velocity indicates motion in the −y-y direction, which corresponds physically to upward motion.

  3. Step 3

    Δy=3.7 m−4.5 m  ⟹  Δy=−0.8 m\Delta y = 3.7\text{ m} - 4.5\text{ m} \implies \Delta y = -0.8\text{ m}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the slope of the position-time graph to find the velocity for the first segment.

You correctly applied the displacement formula using the initial and final positions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Coordinate Direction Misinterpretation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that negative velocity always represents downward motion by default, overlooking the problem's explicit definition that the downward direction is positive (+y+y).

REASONING PATH
Your ACEpath teacher’s suggested approach
Interpret Coordinate Signs
  • The physical meaning of a positive or negative sign depends entirely on the chosen coordinate axis: positive velocity means moving in the direction of increasing coordinates, and negative velocity means moving in the direction of decreasing coordinates.

  • Before stating a physical direction, check which physical direction is defined as positive.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the positive direction: +y+y is defined as downward toward the floor.

  2. Identify the negative direction: −y-y points upward away from the floor.

  3. Interpret the sign of v=−1.2 m/sv = -1.2\text{ m/s}: since v<0v < 0, the object is moving in the negative coordinate direction, which is upward.

Final answer

(a) v1=−1.2 m/sv_1 = -1.2\text{ m/s}; (b) Upward (away from the floor sensor); (c) Δy=−0.80 m\Delta y = -0.80\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always highlight or sketch the positive direction arrow before interpreting velocity or displacement signs.

  • Practice problems where coordinate systems are inverted (e.g., downward positive or leftward positive) to build flexibility.

OverviewACEpath Teacher's Diagnosis

03 The student calculates total distance traveled instead of the net displacement vector over the 5.0-second interval.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v=0.9 m−4.5 m3.0 s=−3.6 m3.0 s  ⟹  v=−1.2 m/sv = \frac{0.9\text{ m} - 4.5\text{ m}}{3.0\text{ s}} = \frac{-3.6\text{ m}}{3.0\text{ s}} \implies v = -1.2\text{ m/s}

  2. Step 2

    Upward\text{Upward}

  3. Step 3

    d1=∣0.9 m−4.5 m∣=3.6 m  ⟹  d2=∣3.7 m−0.9 m∣=2.8 m  ⟹  Δy=3.6 m+2.8 m=6.4 md_1 = |0.9\text{ m} - 4.5\text{ m}| = 3.6\text{ m} \implies d_2 = |3.7\text{ m} - 0.9\text{ m}| = 2.8\text{ m} \implies \Delta y = 3.6\text{ m} + 2.8\text{ m} = 6.4\text{ m}

    Correct

    Δy=yfinal−yinitial=3.7 m−4.5 m=−0.80 m\Delta y = y_{\text{final}} - y_{\text{initial}} = 3.7\text{ m} - 4.5\text{ m} = -0.80\text{ m}

    You calculated the total distance traveled by summing the absolute segment lengths rather than finding the net displacement, which is simply the final position minus the initial position.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the definition of velocity as the slope of the position-time graph.

You correctly interpreted that a negative velocity corresponds to upward motion when positive is defined as downward.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing Distance with Displacement

You summed the magnitudes of individual path segments rather than subtracting the initial position coordinate from the final position coordinate.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating scalar distance (the total length of the path traveled) with vector displacement (the net change in position vector, Δy=yfinal−yinitial\Delta y = y_{\text{final}} - y_{\text{initial}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Displacement
  • Displacement depends only on the endpoints of the entire motion: Δy=yfinal−yinitial\Delta y = y_{\text{final}} - y_{\text{initial}}.

  • Identify the initial position at t=0.0 st = 0.0\text{ s} and final position at t=5.0 st = 5.0\text{ s}, then compute Δy=3.7 m−4.5 m=−0.80 m\Delta y = 3.7\text{ m} - 4.5\text{ m} = -0.80\text{ m}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the position at the very start (t=0.0 st = 0.0\text{ s}): yinitial=4.5 my_{\text{initial}} = 4.5\text{ m}.

  2. Identify the position at the very end (t=5.0 st = 5.0\text{ s}): yfinal=3.7 my_{\text{final}} = 3.7\text{ m}.

  3. Apply the displacement definition directly across the entire interval: Δy=yfinal−yinitial=3.7 m−4.5 m=−0.80 m\Delta y = y_{\text{final}} - y_{\text{initial}} = 3.7\text{ m} - 4.5\text{ m} = -0.80\text{ m}.

Final answer

(a) v1=−1.2 m/sv_1 = -1.2\text{ m/s}; (b) Upward; (c) Δy=−0.80 m\Delta y = -0.80\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out Δy=yfinal−yinitial\Delta y = y_{\text{final}} - y_{\text{initial}} first when asked for displacement, skipping intermediate turning points.

  • Reserve absolute-value segment sums ∣Δy1∣+∣Δy2∣|\Delta y_1| + |\Delta y_2| strictly for total distance or odometer readings.

Lock it in

Similar question

01

A drone moves along a vertical axis where +y+y points downward. At t=1.0 st = 1.0\text{ s}, its position is y=12.0 my = 12.0\text{ m}, and at t=4.0 st = 4.0\text{ s}, its position is y=3.0 my = 3.0\text{ m}. Calculate its average velocity over this interval.

Answer

v=−3.0 m/sv = -3.0\text{ m/s}. Key steps: v=yf−yiΔt=3.0 m−12.0 m4.0 s−1.0 s=−9.0 m3.0 s=−3.0 m/sv = \frac{y_f - y_i}{\Delta t} = \frac{3.0\text{ m} - 12.0\text{ m}}{4.0\text{ s} - 1.0\text{ s}} = \frac{-9.0\text{ m}}{3.0\text{ s}} = -3.0\text{ m/s}.

02

A cart travels along a horizontal track where the positive xx-axis points to the left. Over a 6.0 s6.0\text{ s} run, the cart's position changes from x=15.0 mx = 15.0\text{ m} to x=2.0 mx = 2.0\text{ m}, then turns around and reaches x=7.0 mx = 7.0\text{ m} at t=6.0 st = 6.0\text{ s}. Find: (a) the net displacement Δx\Delta x, and (b) the physical direction of net motion (left or right).

Answer

(a) Δx=−8.0 m\Delta x = -8.0\text{ m}; (b) Right. Key steps: Δx=xf−xi=7.0 m−15.0 m=−8.0 m\Delta x = x_f - x_i = 7.0\text{ m} - 15.0\text{ m} = -8.0\text{ m}. Since +x+x points left, a negative displacement represents net motion to the right.

03

A test mass attached to an oscillating spring moves vertically. A coordinate sensor on the ceiling sets the downward direction as positive (+y+y). The position of the mass is recorded at three times: t0=0 s,y0=1.8 mt_0 = 0\text{ s}, y_0 = 1.8\text{ m}; t1=2.0 s,y1=0.6 mt_1 = 2.0\text{ s}, y_1 = 0.6\text{ m}; and t2=5.0 s,y2=2.4 mt_2 = 5.0\text{ s}, y_2 = 2.4\text{ m}. Calculate: (a) the velocity v01v_{01} during the first interval, (b) the velocity v12v_{12} during the second interval, and (c) the overall displacement Δy\Delta y from t0t_0 to t2t_2.

Answer

(a) v01=−0.60 m/sv_{01} = -0.60\text{ m/s}; (b) v12=+0.60 m/sv_{12} = +0.60\text{ m/s}; (c) Δy=+0.60 m\Delta y = +0.60\text{ m}. Key steps: v01=0.6−1.82.0−0=−0.60 m/sv_{01} = \frac{0.6 - 1.8}{2.0 - 0} = -0.60\text{ m/s}; v12=2.4−0.65.0−2.0=1.83.0=+0.60 m/sv_{12} = \frac{2.4 - 0.6}{5.0 - 2.0} = \frac{1.8}{3.0} = +0.60\text{ m/s}; Δy=y2−y0=2.4−1.8=+0.60 m\Delta y = y_2 - y_0 = 2.4 - 1.8 = +0.60\text{ m}.

Loading workspace…