Resources

An engineering model for an asymmetric interatomic or nonlinear polymer spring describes the restoring force by F(x)=−kx−βx3F(x) = -k x - \beta x^3, where k=400 N/mk = 400\text{ N/m} and β=5.00×104 N/m3\beta = 5.00 \times 10^4\text{ N/m}^3, with potential energy defined as zero at x=0x = 0. (a) Derive the expression for the total potential energy U(x)U(x) stored in the nonlinear spring. (b) For a displacement of x=0.0500 mx = 0.0500\text{ m}, calculate the exact potential energy U(0.0500 m)U(0.0500\text{ m}) and determine the percentage error introduced if one uses the standard linear Hookean approximation Ulin=12kx2U_{\text{lin}} = \frac{1}{2} k x^2.

Answer and steps

Final answer

(a) U(x)=12kx2+14βx4U(x) = \frac{1}{2} k x^2 + \frac{1}{4} \beta x^4; (b) U(0.0500 m)=0.578 JU(0.0500\text{ m}) = 0.578\text{ J}, with percentage error of −13.5%-13.5\%

Steps

01

Calculate the Linear Approximation UlinU_{\text{lin}}

Part (a): Deriving the Potential Energy Function U(x)U(x)

The relationship between a conservative one-dimensional force F(x)F(x) and its corresponding potential energy U(x)U(x) is defined by the work-energy relation: F(x)=−dUdx  ⟹  dU=−F(x) dxF(x) = -\frac{dU}{dx} \quad \implies \quad dU = -F(x)\,dx Integrating from the reference point x=0x = 0 (where U(0)=0U(0) = 0) to an arbitrary position xx: U(x)−U(0)=−∫0xF(x′) dx′U(x) - U(0) = -\int_{0}^{x} F(x')\,dx' Substitute the given nonlinear restoring force F(x′)=−kx′−βx′3F(x') = -k x' - \beta x'^3: U(x)=−∫0x(−kx′−βx′3)dx′=∫0x(kx′+βx′3)dx′U(x) = -\int_{0}^{x} \left(-k x' - \beta x'^3\right) dx' = \int_{0}^{x} \left(k x' + \beta x'^3\right) dx' Evaluating the definite integral gives: U(x)=[12kx′2+14βx′4]0x=12kx2+14βx4U(x) = \left[ \frac{1}{2} k x'^2 + \frac{1}{4} \beta x'^4 \right]_{0}^{x} = \frac{1}{2} k x^2 + \frac{1}{4} \beta x^4

Part (b): Numerical Calculation and Error Analysis

For x=0.0500 mx = 0.0500\text{ m} and k=400 N/mk = 400\text{ N/m}:

Ulin=12kx2=12(400 N/m)(0.0500 m)2=0.500 JU_{\text{lin}} = \frac{1}{2} k x^2 = \frac{1}{2} (400\text{ N/m}) (0.0500\text{ m})^2 = 0.500\text{ J}

02

Calculate the Nonlinear Contribution and Exact Potential Energy U(x)U(x)

For β=5.00×104 N/m3\beta = 5.00 \times 10^4\text{ N/m}^3:

Unonlin=14βx4=14(5.00×104 N/m3)(0.0500 m)4U_{\text{nonlin}} = \frac{1}{4} \beta x^4 = \frac{1}{4} (5.00 \times 10^4\text{ N/m}^3) (0.0500\text{ m})^4

(0.0500)4=6.25×10−6 m4(0.0500)^4 = 6.25 \times 10^{-6}\text{ m}^4

Unonlin=1.25×104×6.25×10−6 J=0.078125 JU_{\text{nonlin}} = 1.25 \times 10^4 \times 6.25 \times 10^{-6}\text{ J} = 0.078125\text{ J}

The exact total potential energy is:

U(0.0500 m)=Ulin+Unonlin=0.500 J+0.078125 J≈0.578 JU(0.0500\text{ m}) = U_{\text{lin}} + U_{\text{nonlin}} = 0.500\text{ J} + 0.078125\text{ J} \approx 0.578\text{ J}

03

Determine the Percentage Error

The percentage error of using the linear approximation instead of the exact energy is:

Percentage Error=Ulin−UexactUexact×100%\text{Percentage Error} = \frac{U_{\text{lin}} - U_{\text{exact}}}{U_{\text{exact}}} \times 100\%

Percentage Error=0.500 J−0.578125 J0.578125 J×100%=−0.078125 J0.578125 J×100%≈−13.5%\text{Percentage Error} = \frac{0.500\text{ J} - 0.578125\text{ J}}{0.578125\text{ J}} \times 100\% = \frac{-0.078125\text{ J}}{0.578125\text{ J}} \times 100\% \approx -13.5\%

Common Pitfall: When calculating percentage error, always divide by the exact (accepted) theoretical value in the denominator, not the approximated value. The negative sign indicates that the linear Hookean approximation underestimates the true energy stored in this stiffening spring.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets the negative sign in the relationship between force and potential energy, U(x) = -∫ F dx, leading to negative potential energy terms.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    U(x)=∫F(x) dx  ⟹  U(x)=∫(−kx−βx3) dx  ⟹  U(x)=−12kx2−14βx4U(x) = \int F(x)\,dx \implies U(x) = \int (-kx - \beta x^3)\,dx \implies U(x) = -\frac{1}{2}kx^2 - \frac{1}{4}\beta x^4

    Correct

    U(x)=−∫0xF(x′) dx′=−∫0x(−kx′−βx′3) dx′=12kx2+14βx4U(x) = -\int_0^x F(x')\,dx' = -\int_0^x (-kx' - \beta x'^3)\,dx' = \frac{1}{2}kx^2 + \frac{1}{4}\beta x^4

    You omitted the negative sign in the relationship between conservative force and potential energy. Because F(x)=−dUdxF(x) = -\frac{dU}{dx}, the potential energy function is defined as U(x)−U(0)=−∫0xF(x′) dx′U(x) - U(0) = -\int_0^x F(x')\,dx', which cancels the negative signs in the restoring force.

  2. Step 2

    Ulin=−(12)(400)(0.0500)2=−0.500 J  ⟹  U=−(12)(400)(0.0500)2−(14)(5.00×104)(0.0500)4=−0.578125 JU_{\text{lin}} = -\left(\frac{1}{2}\right)(400)(0.0500)^2 = -0.500\text{ J} \implies U = -\left(\frac{1}{2}\right)(400)(0.0500)^2 - \left(\frac{1}{4}\right)(5.00 \times 10^4)(0.0500)^4 = -0.578125\text{ J}

    Correct

    U(0.0500 m)=12(400)(0.0500)2+14(5.00×104)(0.0500)4=0.500 J+0.078125 J=0.578 JU(0.0500\text{ m}) = \frac{1}{2}(400)(0.0500)^2 + \frac{1}{4}(5.00 \times 10^4)(0.0500)^4 = 0.500\text{ J} + 0.078125\text{ J} = 0.578\text{ J}

    You substituted the numbers and evaluated powers of xx correctly, but the resulting negative value is carried forward from the sign error in the potential energy formula.

  3. Step 3

    Percentage error=∣−0.500−(−0.578125)∣∣−0.578125∣×100%  ⟹  U=−0.578 J, percentage error=13.5%\text{Percentage error} = \frac{|-0.500 - (-0.578125)|}{|-0.578125|} \times 100\% \implies U = -0.578\text{ J},\ \text{percentage error} = 13.5\%

    Correct

    Percentage error=Ulin−UexactUexact×100%=0.500 J−0.578125 J0.578125 J×100%≈−13.5%\text{Percentage error} = \frac{U_{\text{lin}} - U_{\text{exact}}}{U_{\text{exact}}} \times 100\% = \frac{0.500\text{ J} - 0.578125\text{ J}}{0.578125\text{ J}} \times 100\% \approx -13.5\%

    You correctly set up the relative difference, but keeping the standard signed percentage error formula Ulin−UexactUexact×100%\frac{U_{\text{lin}} - U_{\text{exact}}}{U_{\text{exact}}} \times 100\% yields −13.5%-13.5\%, showing that the linear model underestimates the stored energy.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly integrated the polynomial terms power by power.

You substituted all given numerical values with the proper units.

You accurately computed powers of the displacement, including (0.0500)4=6.25×10−6(0.0500)^4 = 6.25 \times 10^{-6}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing negative sign in potential energy definition

You equated U(x)U(x) directly to the work integral ∫F(x) dx\int F(x)\,dx rather than −∫F(x) dx-\int F(x)\,dx.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the work done by a conservative force, Wcons=∫F dxW_{\text{cons}} = \int F\,dx, with the change in potential energy, ΔU=−Wcons=−∫F dx\Delta U = -W_{\text{cons}} = -\int F\,dx. Displacing a spring against a restoring force stores positive potential energy.

REASONING PATH
Your ACEpath teacher’s suggested approach
Force-Potential Energy Definition
  • F(x)=−dUdx  ⟺  ΔU=−∫xixfF(x) dxF(x) = -\frac{dU}{dx} \iff \Delta U = -\int_{x_i}^{x_f} F(x)\,dx

  • Always write down dU=−F(x) dxdU = -F(x)\,dx first to ensure the leading negative sign is never omitted.

Physical Reality Check for Restoring Forces
  • Stretching or compressing a spring from its equilibrium position always increases its stored energy: U(x)>U(0)=0U(x) > U(0) = 0.

  • If you obtain a negative potential energy for a displaced spring, pause and check the leading minus sign in your integral.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the potential energy definition: U(x)=−∫0xF(x′) dx′U(x) = -\int_0^x F(x')\,dx'.

  2. Substitute F(x′)=−kx′−βx′3F(x') = -kx' - \beta x'^3: U(x)=−∫0x(−kx′−βx′3) dx′=∫0x(kx′+βx′3) dx′U(x) = -\int_0^x (-kx' - \beta x'^3)\,dx' = \int_0^x (kx' + \beta x'^3)\,dx'.

  3. Integrate: U(x)=12kx2+14βx4U(x) = \frac{1}{2}kx^2 + \frac{1}{4}\beta x^4.

  4. Evaluate at x=0.0500 mx = 0.0500\text{ m}: U=12(400)(0.0500)2+14(5.00×104)(0.0500)4=0.500 J+0.078125 J=0.578 JU = \frac{1}{2}(400)(0.0500)^2 + \frac{1}{4}(5.00 \times 10^4)(0.0500)^4 = 0.500\text{ J} + 0.078125\text{ J} = 0.578\text{ J}.

  5. Calculate percentage error: Ulin−UexactUexact×100%=0.500−0.5781250.578125×100%≈−13.5%\frac{U_{\text{lin}} - U_{\text{exact}}}{U_{\text{exact}}} \times 100\% = \frac{0.500 - 0.578125}{0.578125} \times 100\% \approx -13.5\%.

Final answer

(a) U(x)=12kx2+14βx4U(x) = \frac{1}{2} k x^2 + \frac{1}{4} \beta x^4; (b) U(0.0500 m)=0.578 JU(0.0500\text{ m}) = 0.578\text{ J}, with percentage error of −13.5%-13.5\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the fundamental definition Fx=−dUdxF_x = -\frac{dU}{dx}, noting that forces always push systems toward lower potential energy.

  • Practice deriving potential energy functions for nonlinear forces, checking that the stored energy is positive when pulling against a restoring force.

OverviewACEpath Teacher's Diagnosis

02 The student incorrectly integrates x³ as x⁴/3 instead of x⁴/4 when finding the nonlinear term of potential energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    U(x)=−∫(−kx−βx3) dx  ⟹  U(x)=12kx2+13βx4U(x) = -\int (-kx - \beta x^3)\,dx \implies U(x) = \frac{1}{2}kx^2 + \frac{1}{3}\beta x^4

    Correct

    U(x)=−∫0x(−kx′−βx′3) dx′=12kx2+14βx4U(x) = -\int_{0}^{x} (-kx' - \beta x'^3)\,dx' = \frac{1}{2}kx^2 + \frac{1}{4}\beta x^4

    You correctly set up the relation between conservative force and potential energy, but when integrating x3 dxx^3\,dx, applying the power rule ∫xn dx=xn+1n+1\int x^n\,dx = \frac{x^{n+1}}{n+1} yields x44\frac{x^4}{4}, not x43\frac{x^4}{3}.

  2. Step 2

    Ulin=12(400)(0.0500)2=0.500 JU_{\text{lin}} = \frac{1}{2}(400)(0.0500)^2 = 0.500\text{ J}

  3. Step 3

    U=0.500+13(5.00×104)(0.0500)4  ⟹  U=0.500+0.104167=0.604167 JU = 0.500 + \frac{1}{3}(5.00 \times 10^4)(0.0500)^4 \implies U = 0.500 + 0.104167 = 0.604167\text{ J}

    Correct

    U=0.500+14(5.00×104)(0.0500)4=0.500+0.078125=0.578 JU = 0.500 + \frac{1}{4}(5.00 \times 10^4)(0.0500)^4 = 0.500 + 0.078125 = 0.578\text{ J}

    Your arithmetic follows correctly from your derived formula, but the result is affected by using the incorrect coefficient 13\frac{1}{3} instead of 14\frac{1}{4}.

  4. Step 4

    Percentage error=∣0.500−0.604167∣0.604167×100%≈17.2%  ⟹  U=0.604 J, percentage error=17.2%\text{Percentage error} = \frac{|0.500 - 0.604167|}{0.604167} \times 100\% \approx 17.2\% \implies U = 0.604\text{ J},\text{ percentage error} = 17.2\%

    Correct

    Percentage error=0.500 J−0.578125 J0.578125 J×100%≈−13.5%\text{Percentage error} = \frac{0.500\text{ J} - 0.578125\text{ J}}{0.578125\text{ J}} \times 100\% \approx -13.5\%

    Your percentage error calculation structure is sound, but it evaluates to 17.2%17.2\% because it uses the affected value of 0.604167 J0.604167\text{ J} rather than the true value of 0.578 J0.578\text{ J}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related potential energy to conservative force via U(x)=−∫F(x) dxU(x) = -\int F(x)\,dx.

You accurately calculated the linear potential energy contribution as 0.500 J0.500\text{ J}.

You correctly structured the percentage error formula using the exact value in the denominator.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Power rule integration slip

You integrated x3x^3 as x43\frac{x^4}{3} instead of dividing by the new exponent 44.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

A mechanical integration slip occurred where the pre-integration exponent 33 was mistakenly placed in the denominator rather than the incremented exponent n+1=4n+1 = 4.

REASONING PATH
Your ACEpath teacher’s suggested approach
Power Rule for Integration
  • ∫xn dx=xn+1n+1\int x^n\,dx = \frac{x^{n+1}}{n+1} for n≠−1n \neq -1

  • Always increment the exponent first, then divide by that exact new exponent.

Derivative Cross-Check
  • ddx[U(x)]=−F(x)\frac{d}{dx}[U(x)] = -F(x)

  • Differentiate each term of your result to verify it returns the integrand: ddx(14βx4)=βx3\frac{d}{dx}\left(\frac{1}{4}\beta x^4\right) = \beta x^3.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the power rule to x3x^3: ∫x3 dx=x44\int x^3\,dx = \frac{x^4}{4}.

  2. Write the full potential energy: U(x)=12kx2+14βx4U(x) = \frac{1}{2}kx^2 + \frac{1}{4}\beta x^4.

  3. Evaluate the nonlinear term at x=0.0500 mx = 0.0500\text{ m}: Unonlin=14(5.00×104)(0.0500)4=0.078125 JU_{\text{nonlin}} = \frac{1}{4}(5.00 \times 10^4)(0.0500)^4 = 0.078125\text{ J}.

  4. Sum the linear and nonlinear terms: U=0.500 J+0.078125 J=0.578125 J≈0.578 JU = 0.500\text{ J} + 0.078125\text{ J} = 0.578125\text{ J} \approx 0.578\text{ J}.

  5. Calculate the percentage error: 0.500−0.5781250.578125×100%≈−13.5%\frac{0.500 - 0.578125}{0.578125} \times 100\% \approx -13.5\% (or 13.5%13.5\% magnitude underestimation).

Final answer

(a) U(x)=12kx2+14βx4U(x) = \frac{1}{2} k x^2 + \frac{1}{4} \beta x^4; (b) U(0.0500 m)=0.578 JU(0.0500\text{ m}) = 0.578\text{ J}, with percentage error of −13.5%-13.5\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Re-integrate each polynomial term carefully using the updated exponent in the denominator.

  • Differentiate your integrated expression mentally to catch coefficient slips before substituting numerical values.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the percentage error by dividing by the approximate linear value instead of the exact total potential energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    U(x)=−∫(−kx−βx3) dx  ⟹  U(x)=12kx2+14βx4U(x) = -\int (-k x - \beta x^3)\,dx \implies U(x) = \frac{1}{2} k x^2 + \frac{1}{4} \beta x^4

  2. Step 2

    Ulin=12(400)(0.0500)2=0.500 J  ⟹  U=0.500+14(5.00×104)(0.0500)4=0.578125 JU_{\text{lin}} = \frac{1}{2}(400)(0.0500)^2 = 0.500\text{ J} \implies U = 0.500 + \frac{1}{4}(5.00 \times 10^4)(0.0500)^4 = 0.578125\text{ J}

  3. Step 3

    Percentage error=∣0.500−0.578125∣0.500×100%=0.0781250.500×100%=15.625%\text{Percentage error} = \frac{|0.500 - 0.578125|}{0.500} \times 100\% = \frac{0.078125}{0.500} \times 100\% = 15.625\%

    Correct

    Percentage error=Ulin−UexactUexact×100%=0.500−0.5781250.578125×100%≈−13.5%\text{Percentage error} = \frac{U_{\text{lin}} - U_{\text{exact}}}{U_{\text{exact}}} \times 100\% = \frac{0.500 - 0.578125}{0.578125} \times 100\% \approx -13.5\%

    You placed the linear approximation (0.500 J0.500\text{ J}) in the denominator. The denominator for percentage error must always be the true or exact value (0.578125 J0.578125\text{ J}).

  4. Step 4

    U=0.578 J, percentage error=15.6%U = 0.578\text{ J},\ \text{percentage error} = 15.6\%

    Correct

    U=0.578 J, percentage error=−13.5%U = 0.578\text{ J},\ \text{percentage error} = -13.5\%

    Your exact potential energy is correct, but your final percentage error inherits the incorrect denominator from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the definition U(x)=−∫F(x) dxU(x) = -\int F(x)\,dx to find the nonlinear potential energy formula.

You evaluated the powers and arithmetic accurately to obtain 0.578 J0.578\text{ J} for the exact potential energy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect denominator in percentage error calculation

You divided by the linear baseline (0.500 J0.500\text{ J}) rather than the exact value (0.578125 J0.578125\text{ J}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the reference base for percentage error: the true/exact theoretical value represents the complete reality (100%100\%) against which an approximation is measured, so it must always sit in the denominator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Percentage Error Formula
  • Percentage Error=Approximate−ExactExact×100%\text{Percentage Error} = \frac{\text{Approximate} - \text{Exact}}{\text{Exact}} \times 100\%

  • Always verify that the exact (theoretical) quantity is in the denominator before computing.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the exact reference value: Uexact=0.578125 JU_{\text{exact}} = 0.578125\text{ J}.

  2. Identify the approximate value: Ulin=0.500 JU_{\text{lin}} = 0.500\text{ J}.

  3. Set up the percentage error fraction: 0.500 J−0.578125 J0.578125 J×100%=−0.0781250.578125×100%≈−13.5%\frac{0.500\text{ J} - 0.578125\text{ J}}{0.578125\text{ J}} \times 100\% = \frac{-0.078125}{0.578125} \times 100\% \approx -13.5\%.

Final answer

U(0.0500 m)=0.578 JU(0.0500\text{ m}) = 0.578\text{ J}, with percentage error of −13.5%-13.5\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the error formula structure as errortrue×100%\frac{\text{error}}{\text{true}} \times 100\%.

  • Keep the sign when requested, as a negative error indicates that the approximation underestimates the exact value.

Lock it in

Similar question

01

A particle moves along the xx-axis subject to a nonlinear restoring force F(x)=−γx5F(x) = -\gamma x^5, where γ=120 N/m5\gamma = 120\text{ N/m}^5. Taking U(0)=0U(0) = 0, find the potential energy function U(x)U(x) and evaluate it at x=0.500 mx = 0.500\text{ m}.

Answer

U(x)=20x6U(x) = 20 x^6; U(0.500 m)=0.3125 J≈0.313 JU(0.500\text{ m}) = 0.3125\text{ J} \approx 0.313\text{ J}. Key steps: U(x)=−∫0x(−γx′5) dx′=γ6x6=20x6U(x) = -\int_0^x (-\gamma x'^5)\,dx' = \frac{\gamma}{6}x^6 = 20x^6. Then 20(0.500)6=0.3125 J20(0.500)^6 = 0.3125\text{ J}.

02

A softening spring exerts a restoring force F(x)=−kx+αx3F(x) = -k x + \alpha x^3, where k=300 N/mk = 300\text{ N/m} and α=2.00×103 N/m3\alpha = 2.00 \times 10^3\text{ N/m}^3. Derive the potential energy expression U(x)U(x) with U(0)=0U(0) = 0, and find the energy stored at x=0.100 mx = 0.100\text{ m}.

Answer

U(x)=12kx2−14αx4U(x) = \frac{1}{2}kx^2 - \frac{1}{4}\alpha x^4; U(0.100 m)=1.45 JU(0.100\text{ m}) = 1.45\text{ J}. Key steps: U(x)=−∫0x(−kx′+αx′3) dx′=12kx2−14αx4U(x) = -\int_0^x (-kx' + \alpha x'^3)\,dx' = \frac{1}{2}kx^2 - \frac{1}{4}\alpha x^4. Substitute: 12(300)(0.01)−14(2000)(0.0001)=1.50−0.05=1.45 J\frac{1}{2}(300)(0.01) - \frac{1}{4}(2000)(0.0001) = 1.50 - 0.05 = 1.45\text{ J}.

03

A nonlinear spring has restoring force F(x)=−kx−βx3F(x) = -k x - \beta x^3 with k=200 N/mk = 200\text{ N/m} and β=8.00×104 N/m3\beta = 8.00 \times 10^4\text{ N/m}^3. Calculate the exact potential energy at x=0.0400 mx = 0.0400\text{ m}, and compute the percentage error when using the linear approximation Ulin=12kx2U_{\text{lin}} = \frac{1}{2}kx^2.

Answer

Uexact=0.2112 J≈0.211 JU_{\text{exact}} = 0.2112\text{ J} \approx 0.211\text{ J}, percentage error ≈−24.2%\approx -24.2\%. Key steps: Ulin=12(200)(0.0400)2=0.160 JU_{\text{lin}} = \frac{1}{2}(200)(0.0400)^2 = 0.160\text{ J}. Unonlin=14(8.00×104)(0.0400)4=0.0512 JU_{\text{nonlin}} = \frac{1}{4}(8.00 \times 10^4)(0.0400)^4 = 0.0512\text{ J}. Uexact=0.2112 JU_{\text{exact}} = 0.2112\text{ J}. Error =0.160−0.21120.2112×100%≈−24.2%= \frac{0.160 - 0.2112}{0.2112} \times 100\% \approx -24.2\%.

Loading workspace…