Resources

A remote-controlled model vehicle travels along a straight line in two distinct kinematic phases. Phase 1: Beginning from rest at position x0=−12.0 mx_0 = -12.0\text{ m} at time t0=0 st_0 = 0\text{ s}, the vehicle accelerates uniformly at a1=+2.50 m/s2a_1 = +2.50\text{ m/s}^2 in the positive xx-direction for a duration of Δt1=4.00 s\Delta t_1 = 4.00\text{ s}. Phase 2: The vehicle immediately applies brakes, decelerating at a constant rate of a2=−5.00 m/s2a_2 = -5.00\text{ m/s}^2 until it comes to a complete momentary stop. Determine: (a) the position x1x_1 and speed v1v_1 at the end of Phase 1, (b) the additional time interval Δt2\Delta t_2 required to come to rest in Phase 2, and (c) the total elapsed time ttotalt_{\text{total}}, total distance dd, and overall net displacement Δx\Delta x from t=0 st = 0\text{ s} to the final resting point.

Answer and steps

Final answer

(a) At end of Phase 1: x1=+8.00 mx_1 = +8.00\text{ m}, v1=10.0 m/sv_1 = 10.0\text{ m/s}; (b) Phase 2 duration: Δt2=2.00 s\Delta t_2 = 2.00\text{ s}; (c) Entire motion: ttotal=6.00 st_{\text{total}} = 6.00\text{ s}, total distance d=30.0 md = 30.0\text{ m}, and overall displacement Δx=+30.0 m\Delta x = +30.0\text{ m} (final position xf=+18.0 mx_f = +18.0\text{ m}).

Steps

Part (a): Velocity and Position at the End of Phase 1

  1. Velocity at the end of Phase 1 (v1v_1):
    The vehicle starts from rest (v0=0 m/sv_0 = 0\text{ m/s}) and undergoes constant acceleration a1=+2.50 m/s2a_1 = +2.50\text{ m/s}^2 for Δt1=4.00 s\Delta t_1 = 4.00\text{ s}. Using the first kinematic equation: v1=v0+a1Δt1=0+(2.50 m/s2)(4.00 s)=10.0 m/sv_1 = v_0 + a_1 \Delta t_1 = 0 + (2.50\text{ m/s}^2)(4.00\text{ s}) = 10.0\text{ m/s}
  2. Displacement during Phase 1 (Δx1\Delta x_1):
    Δx1=v0Δt1+12a1(Δt1)2=0+12(2.50 m/s2)(4.00 s)2=20.0 m\Delta x_1 = v_0 \Delta t_1 + \frac{1}{2}a_1 (\Delta t_1)^2 = 0 + \frac{1}{2}(2.50\text{ m/s}^2)(4.00\text{ s})^2 = 20.0\text{ m}
  3. Position at the end of Phase 1 (x1x_1):
    Position is displacement relative to the coordinate origin. Given x0=−12.0 mx_0 = -12.0\text{ m}: x1=x0+Δx1=−12.0 m+20.0 m=+8.00 mx_1 = x_0 + \Delta x_1 = -12.0\text{ m} + 20.0\text{ m} = +8.00\text{ m}

Part (b): Duration of Phase 2 (Δt2\Delta t_2)

In Phase 2, the vehicle decelerates from initial speed v1=10.0 m/sv_1 = 10.0\text{ m/s} to rest (v2=0 m/sv_2 = 0\text{ m/s}) with constant acceleration a2=−5.00 m/s2a_2 = -5.00\text{ m/s}^2: v2=v1+a2Δt2v_2 = v_1 + a_2 \Delta t_2 0=10.0 m/s+(−5.00 m/s2)Δt20 = 10.0\text{ m/s} + (-5.00\text{ m/s}^2)\Delta t_2 Δt2=10.0 m/s5.00 m/s2=2.00 s\Delta t_2 = \frac{10.0\text{ m/s}}{5.00\text{ m/s}^2} = 2.00\text{ s}


Part (c): Total Time, Total Distance, and Net Displacement

  1. Total elapsed time (ttotalt_{\text{total}}):
    ttotal=Δt1+Δt2=4.00 s+2.00 s=6.00 st_{\text{total}} = \Delta t_1 + \Delta t_2 = 4.00\text{ s} + 2.00\text{ s} = 6.00\text{ s}
  2. Displacement during Phase 2 (Δx2\Delta x_2):
    Using the work-energy kinematic relation v22=v12+2a2Δx2v_2^2 = v_1^2 + 2a_2 \Delta x_2: 02=(10.0 m/s)2+2(−5.00 m/s2)Δx20^2 = (10.0\text{ m/s})^2 + 2(-5.00\text{ m/s}^2)\Delta x_2 Δx2=−(10.0 m/s)2−10.0 m/s2=+10.0 m\Delta x_2 = \frac{-(10.0\text{ m/s})^2}{-10.0\text{ m/s}^2} = +10.0\text{ m}

    The final position of the vehicle is: xf=x1+Δx2=+8.00 m+10.0 m=+18.0 mx_f = x_1 + \Delta x_2 = +8.00\text{ m} + 10.0\text{ m} = +18.0\text{ m}

  3. Net displacement (Δx\Delta x) versus Total distance (dd):

    • Net displacement is the straight-line vector from the initial to the final position: Δx=xf−x0=+18.0 m−(−12.0 m)=+30.0 m\Delta x = x_f - x_0 = +18.0\text{ m} - (-12.0\text{ m}) = +30.0\text{ m} (Equivalently, Δx=Δx1+Δx2=20.0 m+10.0 m=+30.0 m\Delta x = \Delta x_1 + \Delta x_2 = 20.0\text{ m} + 10.0\text{ m} = +30.0\text{ m})
    • Total distance is the scalar sum of path lengths traveled. Because the vehicle never reversed direction (v(t)≥0v(t) \ge 0 throughout both phases): d=∣Δx1∣+∣Δx2∣=20.0 m+10.0 m=30.0 md = |\Delta x_1| + |\Delta x_2| = 20.0\text{ m} + 10.0\text{ m} = 30.0\text{ m}

Key Distinction: Position (xx) refers to a location relative to an origin x=0x = 0, displacement (Δx\Delta x) represents the change in position (Δx=xf−xi\Delta x = x_f - x_i), and distance (dd) represents the cumulative path length traveled. They are only numerically identical in magnitude when motion starts at the origin and proceeds in a single direction without turning back.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to account for the non-zero initial position x₀ = -12.0 m, equating position at the end of Phase 1 directly to displacement.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v1=0+(2.50)(4.00)=10.0 m/s  ⟹  x1=20.0 mv_1 = 0 + (2.50)(4.00) = 10.0\text{ m/s} \implies x_1 = 20.0\text{ m}

    Correct

    v1=10.0 m/sv_1 = 10.0\text{ m/s}, Δx1=20.0 m\Delta x_1 = 20.0\text{ m}, and x1=x0+Δx1=−12.0 m+20.0 m=+8.00 mx_1 = x_0 + \Delta x_1 = -12.0\text{ m} + 20.0\text{ m} = +8.00\text{ m}

    You correctly determined the velocity v1=10.0 m/sv_1 = 10.0\text{ m/s} and the displacement during Phase 1 (Δx1=20.0 m\Delta x_1 = 20.0\text{ m}). However, because the car started at x0=−12.0 mx_0 = -12.0\text{ m} rather than the origin, the position is x1=x0+Δx1=+8.00 mx_1 = x_0 + \Delta x_1 = +8.00\text{ m}.

  2. Step 2

    0=10.0+(−5.00)Δt2  ⟹  Δt2=2.00 s0 = 10.0 + (-5.00)\Delta t_2 \implies \Delta t_2 = 2.00\text{ s}

  3. Step 3

    ttotal=4.00+2.00=6.00 s  ⟹  Δx2=02−10.022(−5.00)=10.0 mt_{\text{total}} = 4.00 + 2.00 = 6.00\text{ s} \implies \Delta x_2 = \frac{0^2 - 10.0^2}{2(-5.00)} = 10.0\text{ m}

  4. Step 4

    d=20.0+10.0=30.0 m  ⟹  Δx=20.0+10.0=30.0 md = 20.0 + 10.0 = 30.0\text{ m} \implies \Delta x = 20.0 + 10.0 = 30.0\text{ m}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used kinematic equations to determine the velocities and durations of both motion phases.

You calculated the displacement of each phase accurately.

You correctly distinguished total distance from displacement and recognized that the vehicle never reversed direction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating Position with Displacement

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated displacement Δx1\Delta x_1 as the coordinate position x1x_1, assuming the vehicle started at the origin x0=0 mx_0 = 0\text{ m} instead of applying x1=x0+Δx1x_1 = x_0 + \Delta x_1 with x0=−12.0 mx_0 = -12.0\text{ m}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Position vs. Displacement Definition
  • Position x(t)x(t) indicates a coordinate relative to the origin (x=0x=0), whereas displacement Δx=xf−xi\Delta x = x_f - x_i is the change between two positions.

  • Whenever an initial coordinate x0≠0x_0 \neq 0 is given, always write xf=x0+Δxx_f = x_0 + \Delta x rather than setting xf=Δxx_f = \Delta x.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that the vehicle starts at x0=−12.0 mx_0 = -12.0\text{ m}.

  2. Calculate displacement: Δx1=v0Δt1+12a1(Δt1)2=0+12(2.50 m/s2)(4.00 s)2=+20.0 m\Delta x_1 = v_0 \Delta t_1 + \frac{1}{2} a_1 (\Delta t_1)^2 = 0 + \frac{1}{2}(2.50\text{ m/s}^2)(4.00\text{ s})^2 = +20.0\text{ m}.

  3. Compute position: x1=x0+Δx1=−12.0 m+20.0 m=+8.00 mx_1 = x_0 + \Delta x_1 = -12.0\text{ m} + 20.0\text{ m} = +8.00\text{ m}.

Final answer

(a) x1=+8.00 mx_1 = +8.00\text{ m}, v1=10.0 m/sv_1 = 10.0\text{ m/s}; (b) Δt2=2.00 s\Delta t_2 = 2.00\text{ s}; (c) ttotal=6.00 st_{\text{total}} = 6.00\text{ s}, d=30.0 md = 30.0\text{ m}, Δx=+30.0 m\Delta x = +30.0\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between coordinate position xx and displacement Δx\Delta x.

  • Draw a quick 1D number line showing the origin x=0x = 0 whenever a non-zero initial position is provided in a problem.

OverviewACEpath Teacher's Diagnosis

02 The student confuses overall net displacement with the final position coordinate x_final instead of the change in position from x₀.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v1=0+(2.50)(4.00)=10.0 m/s  ⟹  x1=−12.0+(12)(2.50)(4.00)2=8.00 mv_1 = 0 + (2.50)(4.00) = 10.0\text{ m/s} \implies x_1 = -12.0 + \left(\frac{1}{2}\right)(2.50)(4.00)^2 = 8.00\text{ m}

  2. Step 2

    0=10.0+(−5.00)Δt2  ⟹  Δt2=2.00 s0 = 10.0 + (-5.00)\Delta t_2 \implies \Delta t_2 = 2.00\text{ s}

  3. Step 3

    ttotal=4.00+2.00=6.00 s  ⟹  Δx2=02−10.022(−5.00)=10.0 m  ⟹  d=20.0+10.0=30.0 mt_{\text{total}} = 4.00 + 2.00 = 6.00\text{ s} \implies \Delta x_2 = \frac{0^2 - 10.0^2}{2(-5.00)} = 10.0\text{ m} \implies d = 20.0 + 10.0 = 30.0\text{ m}

  4. Step 4

    xfinal=8.00+10.0=18.0 m  ⟹  Δx=18.0 mx_{\text{final}} = 8.00 + 10.0 = 18.0\text{ m} \implies \Delta x = 18.0\text{ m}

    Correct

    Δx=xf−x0=+18.0 m−(−12.0 m)=+30.0 m\Delta x = x_f - x_0 = +18.0\text{ m} - (-12.0\text{ m}) = +30.0\text{ m}

    While your final position coordinate xf=+18.0 mx_f = +18.0\text{ m} is correct, displacement is defined as the change in position: Δx=xf−x0\Delta x = x_f - x_0. Because the vehicle started at x0=−12.0 mx_0 = -12.0\text{ m} rather than the origin, the net displacement is +18.0 m−(−12.0 m)=+30.0 m+18.0\text{ m} - (-12.0\text{ m}) = +30.0\text{ m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used kinematic equations to determine the velocity and position at the end of the acceleration phase.

You accurately solved for the stopping time and stopping distance during deceleration.

You correctly identified that the total distance traveled is the sum of the magnitudes of the displacements of both phases.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Position vs. Displacement Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the final position coordinate xfx_f as equal to the net displacement Δx\Delta x, overlooking that the motion started at a non-zero initial position (x0=−12.0 mx_0 = -12.0\text{ m}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Displacement Definition
  • Δx=xfinal−xinitial\Delta x = x_{\text{final}} - x_{\text{initial}}, not just xfinalx_{\text{final}}.

  • Whenever an object does not start at x=0x = 0, explicitly subtract the initial position coordinate x0x_0 to find the displacement.

Summing Segment Displacements
  • Δxnet=Δx1+Δx2\Delta x_{\text{net}} = \Delta x_1 + \Delta x_2.

  • Check your net displacement by adding the individual stage displacements: Δx=20.0 m+10.0 m=30.0 m\Delta x = 20.0\text{ m} + 10.0\text{ m} = 30.0\text{ m}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the initial position: x0=−12.0 mx_0 = -12.0\text{ m}.

  2. Identify the final position: xf=x1+Δx2=8.00 m+10.0 m=+18.0 mx_f = x_1 + \Delta x_2 = 8.00\text{ m} + 10.0\text{ m} = +18.0\text{ m}.

  3. Apply the definition of displacement: Δx=xf−x0=18.0 m−(−12.0 m)=+30.0 m\Delta x = x_f - x_0 = 18.0\text{ m} - (-12.0\text{ m}) = +30.0\text{ m}.

Final answer

Δx=+30.0 m\Delta x = +30.0\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check whether the starting point is at the origin (x=0x=0) before associating position coordinates directly with displacement values.

  • Use the segment sum method (Δx=Δx1+Δx2\Delta x = \Delta x_1 + \Delta x_2) as an independent check against coordinate subtraction (xf−x0x_f - x_0).

OverviewACEpath Teacher's Diagnosis

03 The student omits the factor of 1/2 in the kinematic displacement formula during both phases, doubling the calculated distances.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v1=0+(2.50)(4.00)=10.0 m/sv_1 = 0 + (2.50)(4.00) = 10.0\text{ m/s}

  2. Step 2

    x1=−12.0+(2.50)(4.00)2=28.0 mx_1 = -12.0 + (2.50)(4.00)^2 = 28.0\text{ m}

    Correct

    x1=x0+12a1(Δt1)2=−12.0 m+12(2.50 m/s2)(4.00 s)2=+8.00 mx_1 = x_0 + \frac{1}{2}a_1 (\Delta t_1)^2 = -12.0\text{ m} + \frac{1}{2}(2.50\text{ m/s}^2)(4.00\text{ s})^2 = +8.00\text{ m}

    You omitted the factor of 12\frac{1}{2} in the displacement term 12at2\frac{1}{2}a t^2, calculating Δx1=40.0 m\Delta x_1 = 40.0\text{ m} instead of 20.0 m20.0\text{ m}.

  3. Step 3

    0=10.0+(−5.00)Δt2  ⟹  Δt2=2.00 s0 = 10.0 + (-5.00)\Delta t_2 \implies \Delta t_2 = 2.00\text{ s}

  4. Step 4

    ttotal=4.00+2.00=6.00 st_{\text{total}} = 4.00 + 2.00 = 6.00\text{ s}

  5. Step 5

    Δx2=02−10.02−5.00=20.0 m\Delta x_2 = \frac{0^2 - 10.0^2}{-5.00} = 20.0\text{ m}

    Correct

    Δx2=v22−v122a2=02−(10.0 m/s)22(−5.00 m/s2)=+10.0 m\Delta x_2 = \frac{v_2^2 - v_1^2}{2a_2} = \frac{0^2 - (10.0\text{ m/s})^2}{2(-5.00\text{ m/s}^2)} = +10.0\text{ m}

    You omitted the factor of 22 in the denominator of Δx=vf2−vi22a\Delta x = \frac{v_f^2 - v_i^2}{2a}, resulting in 20.0 m20.0\text{ m} instead of 10.0 m10.0\text{ m}.

  6. Step 6

    d=40.0+20.0=60.0 m  ⟹  Δx=40.0+20.0=60.0 md = 40.0 + 20.0 = 60.0\text{ m} \implies \Delta x = 40.0 + 20.0 = 60.0\text{ m}

    Correct

    d=∣Δx1∣+∣Δx2∣=20.0 m+10.0 m=30.0 md = |\Delta x_1| + |\Delta x_2| = 20.0\text{ m} + 10.0\text{ m} = 30.0\text{ m}, Δx=Δx1+Δx2=+30.0 m\Delta x = \Delta x_1 + \Delta x_2 = +30.0\text{ m}

    Your reasoning of adding the segment displacements to find total distance and net displacement is completely sound, but the numerical values were doubled because of the earlier missing factor of 12\frac{1}{2}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the linear velocity-time relation v=v0+atv = v_0 + at in both phases.

You properly accounted for the initial negative position x0=−12.0 mx_0 = -12.0\text{ m} when expressing position as initial position plus displacement.

You recognized that because the vehicle moves along the positive direction without turning around, total distance and net displacement share the same magnitude.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Factor of 1/2 in Kinematics

You forgot the factor of 12\frac{1}{2} in Δx=v0t+12at2\Delta x = v_0 t + \frac{1}{2}a t^2 and the factor of 22 in v2=v02+2aΔxv^2 = v_0^2 + 2a\Delta x.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You are treating constant acceleration as though speed were constant at its maximum value, forgetting that displacement under uniform acceleration equals average velocity times time (vˉ=v0+v2\bar{v} = \frac{v_0 + v}{2}), which introduces a factor of 12\frac{1}{2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Recall Average Velocity
  • For constant acceleration, displacement is Δx=vˉt=(v0+v2)t=v0t+12at2\Delta x = \bar{v}t = \left(\frac{v_0 + v}{2}\right)t = v_0 t + \frac{1}{2}at^2.

  • Always verify that any term with acceleration and time squared (at2a t^2) is multiplied by 12\frac{1}{2}.

Check the Work-Energy Kinematic Form
  • vf2=vi2+2aΔx  ⟹  Δx=vf2−vi22av_f^2 = v_i^2 + 2a\Delta x \implies \Delta x = \frac{v_f^2 - v_i^2}{2a}.

  • Ensure the denominator contains 2a2a, not just aa.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Δx1=12a1(Δt1)2=12(2.50 m/s2)(4.00 s)2=20.0 m\Delta x_1 = \frac{1}{2}a_1 (\Delta t_1)^2 = \frac{1}{2}(2.50\text{ m/s}^2)(4.00\text{ s})^2 = 20.0\text{ m}

  2. x1=x0+Δx1=−12.0 m+20.0 m=+8.00 mx_1 = x_0 + \Delta x_1 = -12.0\text{ m} + 20.0\text{ m} = +8.00\text{ m}

  3. Δx2=02−(10.0 m/s)22(−5.00 m/s2)=+10.0 m\Delta x_2 = \frac{0^2 - (10.0\text{ m/s})^2}{2(-5.00\text{ m/s}^2)} = +10.0\text{ m}

  4. d=∣Δx1∣+∣Δx2∣=20.0 m+10.0 m=30.0 md = |\Delta x_1| + |\Delta x_2| = 20.0\text{ m} + 10.0\text{ m} = 30.0\text{ m}

  5. Δx=Δx1+Δx2=20.0 m+10.0 m=+30.0 m\Delta x = \Delta x_1 + \Delta x_2 = 20.0\text{ m} + 10.0\text{ m} = +30.0\text{ m}

Final answer

(a) x1=+8.00 mx_1 = +8.00\text{ m}, v1=10.0 m/sv_1 = 10.0\text{ m/s}; (b) Δt2=2.00 s\Delta t_2 = 2.00\text{ s}; (c) ttotal=6.00 st_{\text{total}} = 6.00\text{ s}, d=30.0 md = 30.0\text{ m}, Δx=+30.0 m\Delta x = +30.0\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the full kinematic template Δx=v0t+12at2\Delta x = v_0 t + \frac{1}{2}at^2 before substituting numerical values.

  • Use graphical verification: on a v–tv\text{--}t graph, displacement is the triangular area under the line, which has a formula of 12base×height\frac{1}{2}\text{base}\times\text{height}.

Lock it in

Similar question

01

A runner starts at coordinate x0=−15.0 mx_0 = -15.0\text{ m} at t=0 st = 0\text{ s} and runs in the positive xx-direction at a constant speed of 4.0 m/s4.0\text{ m/s} for 6.0 s6.0\text{ s}. Determine the runner's displacement Δx\Delta x and final position xfx_f.

Answer

Displacement is Δx=vΔt=(4.0 m/s)(6.0 s)=+24.0 m\Delta x = v \Delta t = (4.0\text{ m/s})(6.0\text{ s}) = +24.0\text{ m}. Final position is xf=x0+Δx=−15.0 m+24.0 m=+9.0 mx_f = x_0 + \Delta x = -15.0\text{ m} + 24.0\text{ m} = +9.0\text{ m}.

02

An elevator cab begins at position y0=+25.0 my_0 = +25.0\text{ m} above the ground floor (y=0y = 0). It accelerates downward from rest at 1.50 m/s21.50\text{ m/s}^2 for 4.00 s4.00\text{ s}. Taking upward as positive, find: (a) the displacement Δy\Delta y, (b) the cab's position y1y_1 at t=4.00 st = 4.00\text{ s}, and (c) the total distance traveled.

Answer

(a) Δy=v0t+12at2=0+12(−1.50 m/s2)(4.00 s)2=−12.0 m\Delta y = v_0 t + \frac{1}{2}a t^2 = 0 + \frac{1}{2}(-1.50\text{ m/s}^2)(4.00\text{ s})^2 = -12.0\text{ m}. (b) Position y1=y0+Δy=25.0 m+(−12.0 m)=+13.0 my_1 = y_0 + \Delta y = 25.0\text{ m} + (-12.0\text{ m}) = +13.0\text{ m}. (c) Total distance d=∣Δy∣=12.0 md = |\Delta y| = 12.0\text{ m}.

03

A rover moves along a straight line starting at x0=+10.0 mx_0 = +10.0\text{ m}. In Stage 1, it travels with displacement Δx1=−22.0 m\Delta x_1 = -22.0\text{ m}. In Stage 2, it reverses direction and travels with displacement Δx2=+8.0 m\Delta x_2 = +8.0\text{ m}. Find: (a) the rover's final position xfx_f, (b) its net displacement Δxnet\Delta x_{\text{net}}, and (c) the total distance dd traveled.

Answer

(a) Final position xf=x0+Δx1+Δx2=10.0 m−22.0 m+8.0 m=−4.0 mx_f = x_0 + \Delta x_1 + \Delta x_2 = 10.0\text{ m} - 22.0\text{ m} + 8.0\text{ m} = -4.0\text{ m}. (b) Net displacement Δxnet=xf−x0=−4.0 m−10.0 m=−14.0 m\Delta x_{\text{net}} = x_f - x_0 = -4.0\text{ m} - 10.0\text{ m} = -14.0\text{ m} (or Δx1+Δx2=−14.0 m\Delta x_1 + \Delta x_2 = -14.0\text{ m}). (c) Total distance d=∣Δx1∣+∣Δx2∣=22.0 m+8.0 m=30.0 md = |\Delta x_1| + |\Delta x_2| = 22.0\text{ m} + 8.0\text{ m} = 30.0\text{ m}.

Loading workspace…