Resources

A particle beam accelerator fires a relativistic packet of ions with a proper length of L0=85.0 cmL_0 = 85.0\text{ cm}. In the laboratory frame, the packet passes a detector with a lab-frame duration of Δtlab=1.25 ns\Delta t_{\text{lab}} = 1.25\text{ ns}, where its contracted length is measured to be L=34.0 cmL = 34.0\text{ cm}. Convert all quantities to consistent SI units and determine: (a) the Lorentz factor γ\gamma, and (b) the proper transit time Δt0\Delta t_0 (in nanoseconds) corresponding to the laboratory transit interval Δtlab\Delta t_{\text{lab}}.

Answer and steps

Final answer

(a) γ=2.50\gamma = 2.50; (b) Δt0=0.500 ns\Delta t_0 = 0.500\text{ ns}

Steps

Part (a): Determine the Lorentz Factor γ\gamma

  1. Convert given lengths to SI units:

    • Proper length of the ion packet: L0=85.0 cm=0.850 mL_0 = 85.0\text{ cm} = 0.850\text{ m}
    • Contracted length observed in the lab frame: L=34.0 cm=0.340 mL = 34.0\text{ cm} = 0.340\text{ m}
  2. Apply the length contraction formula: Length contraction states that the length LL of an object moving relative to an observer is contracted along the direction of motion relative to its rest (proper) length L0L_0: L=L0γL = \frac{L_0}{\gamma}
  3. Solve for the Lorentz factor γ\gamma: γ=L0L=0.850 m0.340 m=2.50\gamma = \frac{L_0}{L} = \frac{0.850\text{ m}}{0.340\text{ m}} = 2.50

Part (b): Determine the Proper Transit Time Δt0\Delta t_0

  1. Identify the relationship between dilated time and proper time:

    • The laboratory interval Δtlab=1.25 ns=1.25×10−9 s\Delta t_{\text{lab}} = 1.25\text{ ns} = 1.25 \times 10^{-9}\text{ s} represents the dilated time interval.
    • According to the time dilation relation: Δtlab=γΔt0\Delta t_{\text{lab}} = \gamma \Delta t_0 where Δt0\Delta t_0 is the proper time interval.
  2. Calculate the proper transit time Δt0\Delta t_0: Δt0=Δtlabγ=1.25 ns2.50=0.500 ns\Delta t_0 = \frac{\Delta t_{\text{lab}}}{\gamma} = \frac{1.25\text{ ns}}{2.50} = 0.500\text{ ns}

Common Pitfall: Be careful with where the Lorentz factor γ\gamma appears. Because γ≥1\gamma \ge 1, moving objects are always measured to be shorter than their proper length (L≤L0L \le L_0), while time intervals measured by non-co-moving clocks are always longer (dilated) compared to the proper time (Δt≥Δt0\Delta t \ge \Delta t_0).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the length contraction formula as L = γ L_0, leading to a Lorentz factor less than 1.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    L0=0.850 m,L=0.340 mL_0 = 0.850\text{ m},\quad L = 0.340\text{ m}

  2. Step 2

    L=γL0  ⟹  γ=LL0=0.3400.850=0.40L = \gamma L_0 \implies \gamma = \frac{L}{L_0} = \frac{0.340}{0.850} = 0.40

    Correct

    L=L0γ  ⟹  γ=L0L=0.850 m0.340 m=2.50L = \frac{L_0}{\gamma} \implies \gamma = \frac{L_0}{L} = \frac{0.850\text{ m}}{0.340\text{ m}} = 2.50

    Length contraction causes moving objects to appear shorter than their proper length, meaning L=L0γL = \frac{L_0}{\gamma} with γ≥1\gamma \ge 1. Setting L=γL0L = \gamma L_0 inverted the ratio and produced γ=0.40\gamma = 0.40, which is physically impossible because the Lorentz factor must satisfy γ≥1\gamma \ge 1.

  3. Step 3

    Δt0=Δtlabγ  ⟹  Δt0=1.250.40=3.125 ns\Delta t_0 = \frac{\Delta t_{\text{lab}}}{\gamma} \implies \Delta t_0 = \frac{1.25}{0.40} = 3.125\text{ ns}

    Correct

    Δt0=Δtlabγ=1.25 ns2.50=0.500 ns\Delta t_0 = \frac{\Delta t_{\text{lab}}}{\gamma} = \frac{1.25\text{ ns}}{2.50} = 0.500\text{ ns}

    You correctly set up the relation Δt0=Δtlabγ\Delta t_0 = \frac{\Delta t_{\text{lab}}}{\gamma} from time dilation, but substituting your earlier value of γ=0.40\gamma = 0.40 instead of 2.502.50 led to an incorrect numerical result.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted both lengths from centimeters to SI units of meters.

You correctly identified the algebraic relationship Δt0=Δtlabγ\Delta t_0 = \frac{\Delta t_{\text{lab}}}{\gamma} connecting proper time to dilated laboratory time.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted length contraction formula

You placed the Lorentz factor γ\gamma in the numerator as L=γL0L = \gamma L_0 rather than the denominator as L=L0γL = \frac{L_0}{\gamma}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the dilation of time intervals with the contraction of spatial lengths. While moving clocks tick slower (time interval dilates: Δt=γΔt0\Delta t = \gamma \Delta t_0), moving objects contract along their line of motion (L=L0γL = \frac{L_0}{\gamma}). Since γ=11−v2/c2≥1\gamma = \frac{1}{\sqrt{1 - v^2/c^2}} \ge 1, the measured length LL must be smaller than the proper length L0L_0.

REASONING PATH
Your ACEpath teacher’s suggested approach
Physical Reality of the Lorentz Factor
  • For any speed v<cv < c, the Lorentz factor satisfies γ=11−v2/c2≥1\gamma = \frac{1}{\sqrt{1 - v^2/c^2}} \ge 1.

  • Always verify that your calculated γ\gamma is greater than or equal to 11; any value less than 11 signals an inverted ratio.

Length Contraction vs. Time Dilation
  • Moving lengths are contracted (L=L0γ≤L0L = \frac{L_0}{\gamma} \le L_0), while moving intervals of time are dilated (Δt=γΔt0≥Δt0\Delta t = \gamma \Delta t_0 \ge \Delta t_0).

  • Check whether the quantity should shrink or grow: divide by γ\gamma to make a length shorter, and multiply by γ\gamma to make a time interval longer.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the length contraction equation: L=L0γL = \frac{L_0}{\gamma}.

  2. Solve for the Lorentz factor: γ=L0L=0.850 m0.340 m=2.50\gamma = \frac{L_0}{L} = \frac{0.850\text{ m}}{0.340\text{ m}} = 2.50.

  3. Substitute γ=2.50\gamma = 2.50 into the proper time formula: Δt0=Δtlabγ=1.25 ns2.50=0.500 ns\Delta t_0 = \frac{\Delta t_{\text{lab}}}{\gamma} = \frac{1.25\text{ ns}}{2.50} = 0.500\text{ ns}.

Final answer

(a) γ=2.50\gamma = 2.50; (b) Δt0=0.500 ns\Delta t_0 = 0.500\text{ ns}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical bounds of the Lorentz factor to ensure that γ\gamma is never less than 11.

  • Practice pairing the formulas L=L0γL = \frac{L_0}{\gamma} and Δt=γΔt0\Delta t = \gamma \Delta t_0 by explicitly verifying whether the observed value should be smaller or larger than the proper value.

OverviewACEpath Teacher's Diagnosis

02 The student confuses time dilation with length contraction and multiplies the laboratory time by γ instead of dividing by γ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    L0=0.850 m,L=0.340 m  ⟹  γ=L0L=0.8500.340=2.50L_0 = 0.850\text{ m}, \quad L = 0.340\text{ m} \implies \gamma = \frac{L_0}{L} = \frac{0.850}{0.340} = 2.50

  2. Step 2

    Δt0=γΔtlab\Delta t_0 = \gamma \Delta t_{\text{lab}}

    Correct

    Δtlab=γΔt0  ⟹  Δt0=Δtlabγ\Delta t_{\text{lab}} = \gamma \Delta t_0 \implies \Delta t_0 = \frac{\Delta t_{\text{lab}}}{\gamma}

    The proper time interval Δt0\Delta t_0 is the shortest time interval measured between two events occurring at the same position in a rest frame. The moving frame's interval is dilated according to Δtlab=γΔt0\Delta t_{\text{lab}} = \gamma \Delta t_0, so you need to divide Δtlab\Delta t_{\text{lab}} by γ\gamma.

  3. Step 3

    Δt0=2.50×1.25=3.125 ns\Delta t_0 = 2.50 \times 1.25 = 3.125\text{ ns}

    Correct

    Δt0=1.25 ns2.50=0.500 ns\Delta t_0 = \frac{1.25\text{ ns}}{2.50} = 0.500\text{ ns}

    Because the inverted formula was used in the previous step, your substitution yielded 3.125 ns3.125\text{ ns} instead of 0.500 ns0.500\text{ ns}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted both given lengths into meters.

You applied the length contraction formula accurately to solve for the Lorentz factor γ\gamma.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted time dilation formula

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You reversed the relationship between proper time and dilated time. Remember that because γ≥1\gamma \ge 1, moving clocks run slow: the dilated interval measured by stationary lab clocks is always larger than the proper time interval measured in the co-moving frame (Δtlab=γΔt0\Delta t_{\text{lab}} = \gamma \Delta t_0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Proper Time is the Minimum Time
  • Δt=γΔt0\Delta t = \gamma \Delta t_0 with γ≥1\gamma \ge 1

  • Always verify that your calculated proper time Δt0\Delta t_0 is strictly less than or equal to the dilated observer time Δt\Delta t.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the standard time dilation relation: Δtlab=γΔt0\Delta t_{\text{lab}} = \gamma \Delta t_0.

  2. Rearrange for the proper transit time: Δt0=Δtlabγ\Delta t_0 = \frac{\Delta t_{\text{lab}}}{\gamma}.

  3. Substitute the known values: Δt0=1.25 ns2.50=0.500 ns\Delta t_0 = \frac{1.25\text{ ns}}{2.50} = 0.500\text{ ns}.

Final answer

(a) γ=2.50\gamma = 2.50; (b) Δt0=0.500 ns\Delta t_0 = 0.500\text{ ns}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between proper length (the longest measured length, L0=γLL_0 = \gamma L) and proper time (the shortest measured duration, Δt=γΔt0\Delta t = \gamma \Delta t_0).

  • Perform a physical sanity check on every relativity problem: lengths contract (L≤L0L \le L_0) and time intervals dilate (Δt≥Δt0\Delta t \ge \Delta t_0).

Lock it in

Similar question

01

A relativistic spacecraft has a proper length of L0=120 mL_0 = 120\text{ m}. As it travels past an orbital station, observers on the station measure its length to be L=72.0 mL = 72.0\text{ m}. Calculate the Lorentz factor γ\gamma for the spacecraft relative to the station.

Answer

γ=1.67\gamma = 1.67 (or 53\frac{5}{3}). Key step: Use length contraction L=L0γ  ⟹  γ=L0L=120 m72.0 m=1.667L = \frac{L_0}{\gamma} \implies \gamma = \frac{L_0}{L} = \frac{120\text{ m}}{72.0\text{ m}} = 1.667.

02

A beam of unstable particles has a mean lifetime at rest of τ0=26.0 ns\tau_0 = 26.0\text{ ns}. In an accelerator laboratory, their lifetime is measured to be tlab=104 nst_{\text{lab}} = 104\text{ ns}. (a) Find the Lorentz factor γ\gamma. (b) If a bunch of these particles has a rest length of 4.00 m4.00\text{ m}, what is the bunch's length measured in the lab?

Answer

(a) γ=4.00\gamma = 4.00; (b) L=1.00 mL = 1.00\text{ m}. Key steps: Time dilation gives γ=tlabτ0=10426.0=4.00\gamma = \frac{t_{\text{lab}}}{\tau_0} = \frac{104}{26.0} = 4.00. Length contraction gives L=L0γ=4.00 m4.00=1.00 mL = \frac{L_0}{\gamma} = \frac{4.00\text{ m}}{4.00} = 1.00\text{ m}.

03

A relativistic train passes through a tunnel that is 150 m150\text{ m} long in the ground frame. Detectors indicate that the train takes 625 ns625\text{ ns} to completely clear a single stationary sensor on the ground, and observers find its contracted length is 150 m150\text{ m} while its proper length is 250 m250\text{ m}. Determine: (a) the Lorentz factor γ\gamma, (b) the proper transit duration recorded by a clock aboard the train, and (c) the speed of the train as a fraction of cc.

Answer

(a) γ=1.67\gamma = 1.67 (or 53\frac{5}{3}); (b) Δt0=375 ns\Delta t_0 = 375\text{ ns}; (c) v=0.80cv = 0.80c. Key steps: (a) γ=L0L=250150=53≈1.67\gamma = \frac{L_0}{L} = \frac{250}{150} = \frac{5}{3} \approx 1.67. (b) Δt0=Δtlabγ=625 ns5/3=375 ns\Delta t_0 = \frac{\Delta t_{\text{lab}}}{\gamma} = \frac{625\text{ ns}}{5/3} = 375\text{ ns}. (c) From γ=11−(v/c)2=53\gamma = \frac{1}{\sqrt{1-(v/c)^2}} = \frac{5}{3}, solve 1−(v/c)2=925  ⟹  v/c=1−9/25=0.801 - (v/c)^2 = \frac{9}{25} \implies v/c = \sqrt{1 - 9/25} = 0.80.

Loading workspace…