Resources

A stunt performer of mass m=65.0 kgm = 65.0\text{ kg} slides down a frictionless curved ramp that terminates in a horizontal launch track at a height of h1=15.0 mh_1 = 15.0\text{ m} above the floor. The performer started from rest at a platform of height h0=24.0 mh_0 = 24.0\text{ m} above the floor. Calculate: (a) the performer's kinetic energy KK at the launch point, and (b) the ratio of the performer's kinetic energy KK to their gravitational potential energy UgU_g (measured relative to the floor) at the exact moment of launch. Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer and steps

Final answer

(a) K=5.73×103 JK = 5.73 \times 10^3\text{ J}; (b) KUg=0.600\frac{K}{U_g} = 0.600.

Steps

Part (a): Kinetic Energy at the Launch Point

  1. Apply the Principle of Conservation of Mechanical Energy
    Because the curved ramp is frictionless and air resistance is negligible, the total mechanical energy of the stunt performer is conserved throughout the slide: Einitial=ElaunchE_{\text{initial}} = E_{\text{launch}}
  2. Express Initial and Final Mechanical Energies
    Choosing the floor as the reference level for gravitational potential energy (y=0 my = 0\text{ m}):

    • At the initial release height h0=24.0 mh_0 = 24.0\text{ m}, the performer starts from rest, so the initial kinetic energy is zero: Einitial=K0+Ug,0=0+mgh0=mgh0E_{\text{initial}} = K_0 + U_{g,0} = 0 + mgh_0 = mgh_0
    • At the launch point at height h1=15.0 mh_1 = 15.0\text{ m}, the mechanical energy consists of kinetic energy KK and gravitational potential energy Ug,1U_{g,1}: Elaunch=K+mgh1E_{\text{launch}} = K + mgh_1
  3. Solve for Kinetic Energy KK
    Equating the two expressions gives: mgh0=K+mgh1  ⟹  K=mg(h0−h1)mgh_0 = K + mgh_1 \implies K = mg(h_0 - h_1)
  4. Substitute the Given Values
    Δh=h0−h1=24.0 m−15.0 m=9.0 m\Delta h = h_0 - h_1 = 24.0\text{ m} - 15.0\text{ m} = 9.0\text{ m} K=(65.0 kg)(9.80 m/s2)(9.0 m)=5733 J≈5.73×103 JK = (65.0\text{ kg})(9.80\text{ m/s}^2)(9.0\text{ m}) = 5733\text{ J} \approx 5.73 \times 10^3\text{ J}

Part (b): Ratio of Kinetic Energy to Gravitational Potential Energy

  1. Calculate the Potential Energy at Launch
    The gravitational potential energy at the launch track relative to the floor is: Ug=mgh1=(65.0 kg)(9.80 m/s2)(15.0 m)=9555 JU_g = mgh_1 = (65.0\text{ kg})(9.80\text{ m/s}^2)(15.0\text{ m}) = 9555\text{ J}
  2. Compute the Ratio KUg\frac{K}{U_g}
    Using the direct energy values: KUg=5733 J9555 J=0.600\frac{K}{U_g} = \frac{5733\text{ J}}{9555\text{ J}} = 0.600

    Alternatively, notice that mass mm and gravitational acceleration gg cancel out, reducing the ratio directly to the ratio of height change to final height: KUg=mg(h0−h1)mgh1=h0−h1h1=9.0 m15.0 m=0.600\frac{K}{U_g} = \frac{mg(h_0 - h_1)}{mgh_1} = \frac{h_0 - h_1}{h_1} = \frac{9.0\text{ m}}{15.0\text{ m}} = 0.600

Common Pitfall: When evaluating potential energy for ratios or total energy equations, always ensure the reference height (y=0y = 0) is kept consistent. Calculating UgU_g relative to the launch height instead of the floor would lead to an incorrect ratio.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates kinetic energy using the total initial height h₀ instead of the vertical drop h₀ - h₁.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δh=24.0 m  ⟹  K=mgh0=(65.0)(9.80)(24.0)=15288 J\Delta h = 24.0\text{ m} \implies K = mgh_0 = (65.0)(9.80)(24.0) = 15288\text{ J}

    Correct

    K=mg(h0−h1)=(65.0 kg)(9.80 m/s2)(24.0 m−15.0 m)=5.73×103 JK = mg(h_0 - h_1) = (65.0\text{ kg})(9.80\text{ m/s}^2)(24.0\text{ m} - 15.0\text{ m}) = 5.73 \times 10^3\text{ J}

    The performer does not fall all the way to the floor (h=0h = 0). By energy conservation, the kinetic energy gained equals the gravitational potential energy lost during the descent: Δh=h0−h1=9.0 m\Delta h = h_0 - h_1 = 9.0\text{ m}, not 24.0 m24.0\text{ m}.

  2. Step 2

    Ug=mgh1=(65.0)(9.80)(15.0)=9555 JU_g = mgh_1 = (65.0)(9.80)(15.0) = 9555\text{ J}

  3. Step 3

    Ratio=KUg=152889555=1.60\text{Ratio} = \frac{K}{U_g} = \frac{15288}{9555} = 1.60

    Correct

    KUg=5733 J9555 J=0.600\frac{K}{U_g} = \frac{5733\text{ J}}{9555\text{ J}} = 0.600

    Your division and setup are correct, but the final numerical value is affected by using the incorrect kinetic energy from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the formula for gravitational potential energy as Ug=mghU_g = mgh.

You correctly calculated the launch track potential energy relative to the floor.

You set up the ratio KUg\frac{K}{U_g} using the correct quantities.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating kinetic energy to total initial height instead of vertical drop

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the initial release height as the entire vertical drop Δh\Delta h, forgetting that the performer is still 15.0 m15.0\text{ m} above the ground at the launch point.

REASONING PATH
Your ACEpath teacher’s suggested approach
Energy Conservation Form
  • Ki+Ui=Kf+UfK_i + U_i = K_f + U_f

  • Always write the full mechanical energy conservation equation before solving for KK.

Vertical Displacement
  • Δh=hinitial−hfinal\Delta h = h_{\text{initial}} - h_{\text{final}}

  • Check whether the motion terminates at the ground reference (h=0h=0) or at an elevated track (h1>0h_1 > 0).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the vertical drop: Δh=h0−h1=24.0 m−15.0 m=9.0 m\Delta h = h_0 - h_1 = 24.0\text{ m} - 15.0\text{ m} = 9.0\text{ m}.

  2. Calculate kinetic energy at launch: K=mgΔh=(65.0 kg)(9.80 m/s2)(9.0 m)=5733 J≈5.73×103 JK = mg\Delta h = (65.0\text{ kg})(9.80\text{ m/s}^2)(9.0\text{ m}) = 5733\text{ J} \approx 5.73 \times 10^3\text{ J}.

  3. Compute the ratio: KUg=5733 J9555 J=0.600\frac{K}{U_g} = \frac{5733\text{ J}}{9555\text{ J}} = 0.600.

Final answer

(a) K=5.73×103 JK = 5.73 \times 10^3\text{ J}; (b) KUg=0.600\frac{K}{U_g} = 0.600

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the trajectory and mark the reference level y=0y = 0, the starting height h0h_0, and the ending height h1h_1.

  • Write out K1=mg(h0−h1)K_1 = mg(h_0 - h_1) whenever an object starts from rest and ends at an elevation above the reference line.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the requested ratio and calculates U_g / K instead of K / U_g.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δh=24.0 m−15.0 m=9.0 m  ⟹  K=mgΔh=(65.0)(9.80)(9.0)=5733 J\Delta h = 24.0\text{ m} - 15.0\text{ m} = 9.0\text{ m} \implies K = mg\Delta h = (65.0)(9.80)(9.0) = 5733\text{ J}

  2. Step 2

    Ug=mgh1=(65.0)(9.80)(15.0)=9555 JU_g = mgh_1 = (65.0)(9.80)(15.0) = 9555\text{ J}

  3. Step 3

    Ratio=UgK=95555733=1.67\text{Ratio} = \frac{U_g}{K} = \frac{9555}{5733} = 1.67

    Correct

    KUg=5733 J9555 J=0.600\frac{K}{U_g} = \frac{5733\text{ J}}{9555\text{ J}} = 0.600

    The problem asks for the ratio of kinetic energy KK to gravitational potential energy UgU_g, which means KK belongs in the numerator and UgU_g in the denominator: KUg\frac{K}{U_g}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the decrease in gravitational potential energy equals the kinetic energy gained.

You accurately computed the values of both kinetic energy and gravitational potential energy at the launch height.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted ratio order

You set up the fraction upside down as UgK\frac{U_g}{K} instead of KUg\frac{K}{U_g}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Misinterpreting the phrasing 'the ratio of A to B' by placing the second quantity in the numerator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Ratio phrasing rule
  • The phrase 'the ratio of AA to BB' is mathematically written as AB\frac{A}{B}, where the first quantity named is the numerator.

  • Always write down the literal variable form firstsecond\frac{\text{first}}{\text{second}} before substituting numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the requested order from the prompt: 'ratio of kinetic energy KK to gravitational potential energy UgU_g'   ⟹  KUg\implies \frac{K}{U_g}.

  2. Substitute the calculated energies: KUg=5733 J9555 J=0.600\frac{K}{U_g} = \frac{5733\text{ J}}{9555\text{ J}} = 0.600.

Final answer

(a) K=5.73×103 JK = 5.73 \times 10^3\text{ J}; (b) KUg=0.600\frac{K}{U_g} = 0.600

NEXT STEPS
Final Takeaways from Your Teacher
  • Underline the two quantities in the prompt and immediately write Quantity 1Quantity 2\frac{\text{Quantity 1}}{\text{Quantity 2}} before doing arithmetic.

  • Notice that since the height drop (9.0 m9.0\text{ m}) is less than the remaining height (15.0 m15.0\text{ m}), KK must be smaller than UgU_g, meaning the ratio KUg\frac{K}{U_g} must be less than 11.

OverviewACEpath Teacher's Diagnosis

03 The student uses the height difference h₀ - h₁ instead of the height above the floor h₁ when evaluating the potential energy at the launch point.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δh=24.0 m−15.0 m=9.0 m  ⟹  K=mgΔh=(65.0)(9.80)(9.0)=5733 J\Delta h = 24.0\text{ m} - 15.0\text{ m} = 9.0\text{ m} \implies K = mg\Delta h = (65.0)(9.80)(9.0) = 5733\text{ J}

  2. Step 2

    Ug=mgΔh=(65.0)(9.80)(9.0)=5733 JU_g = mg\Delta h = (65.0)(9.80)(9.0) = 5733\text{ J}

    Correct

    Ug=mgh1=(65.0 kg)(9.80 m/s2)(15.0 m)=9555 JU_g = mgh_1 = (65.0\text{ kg})(9.80\text{ m/s}^2)(15.0\text{ m}) = 9555\text{ J}

    You evaluated gravitational potential energy using the vertical drop Δh=9.0 m\Delta h = 9.0\text{ m} rather than the performer's height above the reference level (the floor), which is h1=15.0 mh_1 = 15.0\text{ m}.

  3. Step 3

    Ratio\text{Ratio} = KUg\frac{K}{U_g} = 57335733\frac{5733}{5733} = 1

    Correct

    KUg\frac{K}{U_g} = 5733 J9555 J\frac{5733\text{ J}}{9555\text{ J}} = 0.600

    You set up the ratio formula correctly, but the result was affected by the incorrect value of UgU_g from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the vertical descent of the performer as Δh=9.0 m\Delta h = 9.0\text{ m}.

You properly used conservation of mechanical energy to determine the kinetic energy at the launch point.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reference level confusion in potential energy

You substituted the height drop Δh\Delta h into the potential energy formula instead of the height h1h_1 relative to the designated zero reference level.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the change in potential energy ΔUg=mgΔh\Delta U_g = mg\Delta h (which equals the kinetic energy gained) with the absolute potential energy Ug=mghU_g = mgh at a specific position relative to the floor.

REASONING PATH
Your ACEpath teacher’s suggested approach
Change in Energy vs. State Energy
  • ΔUg=−ΔK\Delta U_g = -\Delta K depends on the height drop Δh\Delta h, whereas UgU_g at a given state depends on the vertical distance yy above the reference level (y=0y=0).

  • When a problem specifies potential energy relative to the floor, identify the floor as y=0y = 0 and use the current height above that floor (h1h_1), not the distance fallen.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate the gravitational potential energy at the launch height relative to the floor: Ug=mgh1=(65.0 kg)(9.80 m/s2)(15.0 m)=9555 JU_g = mgh_1 = (65.0\text{ kg})(9.80\text{ m/s}^2)(15.0\text{ m}) = 9555\text{ J}.

  2. Compute the required ratio using the correct energies: KUg=5733 J9555 J=0.600\frac{K}{U_g} = \frac{5733\text{ J}}{9555\text{ J}} = 0.600 (or directly as Δhh1=9.0 m15.0 m=0.600\frac{\Delta h}{h_1} = \frac{9.0\text{ m}}{15.0\text{ m}} = 0.600).

Final answer

(a) K=5.73×103 JK = 5.73 \times 10^3\text{ J}; (b) KUg=0.600\frac{K}{U_g} = 0.600

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down where the reference level y=0y = 0 is defined before writing an expression for potential energy UgU_g.

  • Double-check whether a question asks for a change in potential energy (ΔUg\Delta U_g) or the potential energy at a specific point (UgU_g).

Lock it in

Similar question

01

A 2.0 kg2.0\text{ kg} cart starts from rest at the top of a frictionless ramp of height h0=10.0 mh_0 = 10.0\text{ m} and slides down to a platform at height h1=4.0 mh_1 = 4.0\text{ m}. Find its kinetic energy at the platform. Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

K=118 JK = 118\text{ J}. The vertical drop is Δh=10.0 m−4.0 m=6.0 m\Delta h = 10.0\text{ m} - 4.0\text{ m} = 6.0\text{ m}. Thus, K=mgΔh=(2.0 kg)(9.80 m/s2)(6.0 m)=117.6 J≈118 JK = mg\Delta h = (2.0\text{ kg})(9.80\text{ m/s}^2)(6.0\text{ m}) = 117.6\text{ J} \approx 118\text{ J}.

02

A skateboarder of mass mm rolls from rest down a ramp from an initial height of 18.0 m18.0\text{ m} to a jump ledge at height h1h_1. At the ledge, the skateboarder's kinetic energy equals twice their gravitational potential energy (measured relative to the ground). What is the height h1h_1 of the jump ledge?

Answer

h1=6.0 mh_1 = 6.0\text{ m}. Conservation of energy gives K=mg(18.0−h1)K = mg(18.0 - h_1) and U=mgh1U = mgh_1. Setting K=2UK = 2U gives mg(18.0−h1)=2mgh1  ⟹  18.0−h1=2h1  ⟹  3h1=18.0 m  ⟹  h1=6.0 mmg(18.0 - h_1) = 2mgh_1 \implies 18.0 - h_1 = 2h_1 \implies 3h_1 = 18.0\text{ m} \implies h_1 = 6.0\text{ m}.

03

A roller coaster car (m=500 kgm = 500\text{ kg}) passes point A at height 35.0 m35.0\text{ m} with speed v0=10.0 m/sv_0 = 10.0\text{ m/s}. It travels along a frictionless track to point B at height 20.0 m20.0\text{ m}. Determine: (a) the kinetic energy at point B, and (b) the ratio KBUB\frac{K_B}{U_B} relative to the ground. Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

(a) KB=9.85×104 JK_B = 9.85 \times 10^4\text{ J}; (b) KBUB=1.00\frac{K_B}{U_B} = 1.00. Initial mechanical energy is E=12(500)(10.0)2+(500)(9.80)(35.0)=25000+171500=196500 JE = \frac{1}{2}(500)(10.0)^2 + (500)(9.80)(35.0) = 25000 + 171500 = 196500\text{ J}. At point B, UB=(500)(9.80)(20.0)=98000 JU_B = (500)(9.80)(20.0) = 98000\text{ J}, so KB=196500−98000=98500 J≈9.85×104 JK_B = 196500 - 98000 = 98500\text{ J} \approx 9.85 \times 10^4\text{ J}. The ratio is 9850098000≈1.005\frac{98500}{98000} \approx 1.005 (or 1.001.00 to three significant figures).

Loading workspace…