Resources

An electric immersion heater of resistance R=(24.0±0.4) ΩR = (24.0 \pm 0.4)\,\Omega carries a steady current I=(5.00±0.10) AI = (5.00 \pm 0.10)\text{ A} for a duration t=(180.0±0.5) st = (180.0 \pm 0.5)\text{ s} to warm an insulated water container. The electrical thermal energy delivered is given by Joule heating, Q=I2RtQ = I^2 R t. Assuming the uncertainties in current, resistance, and time are mutually uncorrelated and random, calculate the total electrical energy delivered QQ in joules, its propagated absolute uncertainty δQ\delta Q, and the relative percentage uncertainty δQQ×100%\frac{\delta Q}{Q} \times 100\%.

Answer and steps

Final answer

Q=108,000 J=108.0 kJQ = 108{,}000\text{ J} = 108.0\text{ kJ}, δQ=4700 J=4.7 kJ\delta Q = 4700\text{ J} = 4.7\text{ kJ} (relative uncertainty 4.34%4.34\%), reported as Q=(1.080±0.047)×105 JQ = (1.080 \pm 0.047) \times 10^5\text{ J}

Steps

01

Calculate the Nominal Value of Energy Delivered (QQ)

The electrical energy converted into thermal energy by Joule heating is: Q=I2RtQ = I^2 R t

Substitute the given nominal values:

  • Current: I=5.00 AI = 5.00\text{ A}
  • Resistance: R=24.0 ΩR = 24.0\,\Omega
  • Time: t=180.0 st = 180.0\text{ s}

Q=(5.00 A)2⋅(24.0 Ω)⋅(180.0 s)Q = (5.00\text{ A})^2 \cdot (24.0\,\Omega) \cdot (180.0\text{ s}) Q=25.0⋅24.0⋅180.0=108,000 J=108.0 kJQ = 25.0 \cdot 24.0 \cdot 180.0 = 108{,}000\text{ J} = 108.0\text{ kJ}


02

Determine Fractional (Relative) Uncertainties

For each measured variable, calculate the fractional uncertainty δxx\frac{\delta x}{x}:

  • Current (II): δII=0.10 A5.00 A=0.020(2.0%)\frac{\delta I}{I} = \frac{0.10\text{ A}}{5.00\text{ A}} = 0.020\quad (2.0\%)
  • Resistance (RR): δRR=0.4 Ω24.0 Ω=160≈0.0167(1.67%)\frac{\delta R}{R} = \frac{0.4\,\Omega}{24.0\,\Omega} = \frac{1}{60} \approx 0.0167\quad (1.67\%)
  • Time (tt): δtt=0.5 s180.0 s=1360≈0.0028(0.28%)\frac{\delta t}{t} = \frac{0.5\text{ s}}{180.0\text{ s}} = \frac{1}{360} \approx 0.0028\quad (0.28\%)

03

Propagate Uncertainties in Quadrature

For independent and random uncertainties in a product of powers of the form Q=InRmtkQ = I^n R^m t^k, the fractional uncertainties combine in quadrature (root-sum-square), with each fractional uncertainty multiplied by the absolute value of its respective exponent:

δQQ=(2⋅δII)2+(δRR)2+(δtt)2\frac{\delta Q}{Q} = \sqrt{\left(2 \cdot \frac{\delta I}{I}\right)^2 + \left(\frac{\delta R}{R}\right)^2 + \left(\frac{\delta t}{t}\right)^2}

Common Pitfall: When a quantity is raised to a power (here, I2I^2), its relative uncertainty is multiplied by the exponent before squaring in the quadrature formula: (2⋅δII)2=4(δII)2\left(2 \cdot \frac{\delta I}{I}\right)^2 = 4\left(\frac{\delta I}{I}\right)^2, rather than simply squaring the power I2I^2.

Compute each term:

  • Current contribution: (2×0.020)2=(0.040)2=0.001600\left(2 \times 0.020\right)^2 = (0.040)^2 = 0.001600
  • Resistance contribution: (160)2≈0.000278\left(\frac{1}{60}\right)^2 \approx 0.000278
  • Time contribution: (1360)2≈0.000008\left(\frac{1}{360}\right)^2 \approx 0.000008

Sum the squares: (δQQ)2=0.001600+0.000278+0.000008=0.001886\left(\frac{\delta Q}{Q}\right)^2 = 0.001600 + 0.000278 + 0.000008 = 0.001886

Take the square root to find the total relative uncertainty: δQQ=0.001886≈0.0434  ⟹  4.34%\frac{\delta Q}{Q} = \sqrt{0.001886} \approx 0.0434 \implies 4.34\%


04

Calculate Absolute Uncertainty (δQ\delta Q) and Express the Final Result

Multiply the relative uncertainty by the nominal value QQ: δQ=Q⋅(δQQ)=108,000 J⋅0.04342≈4689 J≈4700 J=4.7 kJ\delta Q = Q \cdot \left(\frac{\delta Q}{Q}\right) = 108{,}000\text{ J} \cdot 0.04342 \approx 4689\text{ J} \approx 4700\text{ J} = 4.7\text{ kJ}

Expressed with matching precision:

  • Q=108,000 J=108.0 kJQ = 108{,}000\text{ J} = 108.0\text{ kJ}
  • δQ=4700 J=4.7 kJ\delta Q = 4700\text{ J} = 4.7\text{ kJ}
  • Relative percentage uncertainty: δQQ×100%≈4.34%\frac{\delta Q}{Q} \times 100\% \approx 4.34\%

The measurement is reported as: Q=(1.080±0.047)×105 JQ = (1.080 \pm 0.047) \times 10^5\text{ J}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to multiply the relative uncertainty of current by the exponent 2 when propagating uncertainties for I².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Q=(5.00)2×24.0×180.0  ⟹  Q=108000 JQ = (5.00)^2 \times 24.0 \times 180.0 \implies Q = 108000\text{ J}

  2. Step 2

    δI/I=0.10/5.00=0.020\delta I/I = 0.10/5.00 = 0.020, δR/R=0.4/24.0=0.0167\delta R/R = 0.4/24.0 = 0.0167, δt/t=0.5/180.0=0.0028\delta t/t = 0.5/180.0 = 0.0028

  3. Step 3

    δQ/Q=0.0202+0.01672+0.00282=0.000687=0.0262\delta Q/Q = \sqrt{0.020^2 + 0.0167^2 + 0.0028^2} = \sqrt{0.000687} = 0.0262

    Correct

    δQQ=(2⋅δII)2+(δRR)2+(δtt)2=(0.040)2+(0.0167)2+(0.0028)2≈0.0434\frac{\delta Q}{Q} = \sqrt{\left(2 \cdot \frac{\delta I}{I}\right)^2 + \left(\frac{\delta R}{R}\right)^2 + \left(\frac{\delta t}{t}\right)^2} = \sqrt{(0.040)^2 + (0.0167)^2 + (0.0028)^2} \approx 0.0434

    You omitted the factor of 22 multiplying the fractional uncertainty of II. Because current is raised to the second power (I2I^2), its fractional uncertainty must be multiplied by its exponent before combining in quadrature.

  4. Step 4

    δQ=108000×0.0262=2830 J  ⟹  (δQ/Q)×100%=2.6%\delta Q = 108000 \times 0.0262 = 2830\text{ J} \implies (\delta Q/Q) \times 100\% = 2.6\%

    Correct

    δQQ×100%≈4.34%  ⟹  δQ=108,000 J×0.04342≈4700 J\frac{\delta Q}{Q} \times 100\% \approx 4.34\% \implies \delta Q = 108{,}000\text{ J} \times 0.04342 \approx 4700\text{ J}

    Your conversion from relative to absolute uncertainty followed the correct procedure, but the resulting values carry forward the error from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the total nominal energy delivered using Joule's law.

You accurately found the fractional uncertainties for current, resistance, and time.

You used root-sum-square quadrature appropriate for independent random uncertainties.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing exponent weight in quadrature propagation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated I2I^2 as having the same fractional uncertainty contribution as II, forgetting that raising a variable to a power nn scales its relative uncertainty by ∣n∣|n| before squaring in quadrature.

REASONING PATH
Your ACEpath teacher’s suggested approach
Power Rule in Uncertainty Propagation
  • For a quantity y=xny = x^n, the relative uncertainty is δyy=∣n∣δxx\frac{\delta y}{y} = |n| \frac{\delta x}{x}.

  • Always multiply the relative uncertainty of each variable by the magnitude of its power before squaring inside the square root.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the power factor of 22 to the current term: 2⋅δII=2×0.020=0.0402 \cdot \frac{\delta I}{I} = 2 \times 0.020 = 0.040.

  2. Combine the terms in quadrature: δQQ=(0.040)2+(0.0167)2+(0.0028)2=0.001600+0.000278+0.000008=0.001886≈0.0434\frac{\delta Q}{Q} = \sqrt{(0.040)^2 + (0.0167)^2 + (0.0028)^2} = \sqrt{0.001600 + 0.000278 + 0.000008} = \sqrt{0.001886} \approx 0.0434.

  3. Calculate the absolute uncertainty: δQ=Q×(δQQ)=108,000 J×0.04342≈4700 J\delta Q = Q \times \left(\frac{\delta Q}{Q}\right) = 108{,}000\text{ J} \times 0.04342 \approx 4700\text{ J}.

Final answer

Q=108,000 J=108.0 kJQ = 108{,}000\text{ J} = 108.0\text{ kJ}, δQ=4700 J=4.7 kJ\delta Q = 4700\text{ J} = 4.7\text{ kJ}, δQQ×100%=4.34%\frac{\delta Q}{Q} \times 100\% = 4.34\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice writing the general quadrature formula with explicit exponents before plugging in numerical values.

  • Verify that powers greater than 11 produce larger relative contributions compared to linear factors.

OverviewACEpath Teacher's Diagnosis

02 The student adds relative uncertainties linearly instead of combining them in quadrature for independent random uncertainties.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Q=I2Rt=5.002×24.0×180.0  ⟹  Q=108000 JQ = I^2 R t = 5.00^2 \times 24.0 \times 180.0 \implies Q = 108000\text{ J}

  2. Step 2

    δII=0.105.00=0.020  ⟹  δRR=0.424.0=0.0167  ⟹  δtt=0.5180.0=0.0028\frac{\delta I}{I} = \frac{0.10}{5.00} = 0.020 \implies \frac{\delta R}{R} = \frac{0.4}{24.0} = 0.0167 \implies \frac{\delta t}{t} = \frac{0.5}{180.0} = 0.0028

  3. Step 3

    δQQ=2(δII)+(δRR)+(δtt)=2(0.020)+0.0167+0.0028=0.0595\frac{\delta Q}{Q} = 2\left(\frac{\delta I}{I}\right) + \left(\frac{\delta R}{R}\right) + \left(\frac{\delta t}{t}\right) = 2(0.020) + 0.0167 + 0.0028 = 0.0595

    Correct

    δQQ=(2δII)2+(δRR)2+(δtt)2=(0.040)2+(0.0167)2+(0.0028)2≈0.0434\frac{\delta Q}{Q} = \sqrt{\left(2\frac{\delta I}{I}\right)^2 + \left(\frac{\delta R}{R}\right)^2 + \left(\frac{\delta t}{t}\right)^2} = \sqrt{(0.040)^2 + (0.0167)^2 + (0.0028)^2} \approx 0.0434

    Because the uncertainties are independent and random, you need to combine the fractional uncertainties in quadrature (root-sum-square) rather than by simple linear addition. Linear addition represents the worst-case upper bound, not standard Gaussian error propagation.

  4. Step 4

    δQ=108000×0.0595=6426 J  ⟹  (δQQ)×100%=5.95%\delta Q = 108000 \times 0.0595 = 6426\text{ J} \implies \left(\frac{\delta Q}{Q}\right) \times 100\% = 5.95\%

    Correct

    δQQ×100%≈4.34%  ⟹  δQ=108,000×0.04342≈4700 J\frac{\delta Q}{Q} \times 100\% \approx 4.34\% \implies \delta Q = 108{,}000 \times 0.04342 \approx 4700\text{ J}

    Your final calculations correctly followed your propagated relative uncertainty, but the numerical values were shifted by the linear addition error in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly substituted the nominal values into Q=I2RtQ = I^2 R t to obtain 108,000 J108{,}000\text{ J}.

You calculated the fractional uncertainties for current, resistance, and time accurately.

You recognized that the exponent of 22 on current multiplies its fractional uncertainty by 22.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear Addition vs. Quadrature

You used the worst-case linear combination rule instead of the root-sum-square quadrature rule for independent random errors.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing worst-case error bounding with standard statistical propagation for uncorrelated variables. Independent random errors have random signs and tend to partially cancel each other, which requires combining independent variance contributions by adding squares under a square root.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Error Correlation
  • For independent, uncorrelated random errors in y=x1ax2b…y = x_1^{a} x_2^{b} \dots, relative uncertainties combine in quadrature.

  • Check the problem statement for 'independent', 'uncorrelated', or 'random' before choosing between quadrature and worst-case bounds.

Formulate Quadrature with Powers
  • δyy=∑(niδxixi)2\frac{\delta y}{y} = \sqrt{\sum \left(n_i \frac{\delta x_i}{x_i}\right)^2}

  • Multiply each fractional uncertainty by its power first, square that product, sum all squared terms, and take the square root.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the root-sum-square formula: δQQ=(2δII)2+(δRR)2+(δtt)2\frac{\delta Q}{Q} = \sqrt{\left(2\frac{\delta I}{I}\right)^2 + \left(\frac{\delta R}{R}\right)^2 + \left(\frac{\delta t}{t}\right)^2}.

  2. Compute the squared terms: (2×0.020)2=0.001600(2 \times 0.020)^2 = 0.001600, (0.0167)2≈0.000278(0.0167)^2 \approx 0.000278, and (0.0028)2≈0.000008(0.0028)^2 \approx 0.000008.

  3. Sum the squares and take the square root: δQQ=0.001886≈0.0434=4.34%\frac{\delta Q}{Q} = \sqrt{0.001886} \approx 0.0434 = 4.34\%.

  4. Compute absolute uncertainty: δQ=108,000 J×0.04342≈4689 J≈4.7 kJ\delta Q = 108{,}000\text{ J} \times 0.04342 \approx 4689\text{ J} \approx 4.7\text{ kJ}.

Final answer

Q=108,000 JQ = 108{,}000\text{ J}, δQ=4700 J\delta Q = 4700\text{ J} (4.34%4.34\%), or (1.080±0.047)×105 J(1.080 \pm 0.047) \times 10^5\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice setting up quadrature for products and quotients involving powers.

  • Double-check whether a question specifies 'maximum worst-case uncertainty' or 'uncorrelated random uncertainty'.

OverviewACEpath Teacher's Diagnosis

03 The student directly adds absolute uncertainties in quadrature without converting to relative uncertainties.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Q=(5.00)2×24.0×180.0=108000 JQ = (5.00)^2 \times 24.0 \times 180.0 = 108000\text{ J}

  2. Step 2

    δQ=(2×0.10)2+0.42+0.52⟹δQ=0.04+0.16+0.25=0.45≈0.67 J\delta Q = \sqrt{(2 \times 0.10)^2 + 0.4^2 + 0.5^2} \Longrightarrow \delta Q = \sqrt{0.04 + 0.16 + 0.25} = \sqrt{0.45} \approx 0.67\text{ J}

    Correct

    δQQ=(2δII)2+(δRR)2+(δtt)2=(0.040)2+(160)2+(1360)2≈0.0434\frac{\delta Q}{Q} = \sqrt{\left(2\frac{\delta I}{I}\right)^2 + \left(\frac{\delta R}{R}\right)^2 + \left(\frac{\delta t}{t}\right)^2} = \sqrt{(0.040)^2 + \left(\frac{1}{60}\right)^2 + \left(\frac{1}{360}\right)^2} \approx 0.0434

    For quantities combined by multiplication and powers (Q=I2RtQ = I^2 R t), relative (fractional) uncertainties combine in quadrature, not absolute uncertainties. Combining absolute uncertainties directly also improperly adds quantities with different physical units (A2\text{A}^2, Ω2\Omega^2, and s2\text{s}^2).

  3. Step 3

    (δQQ)×100%=(0.67108000)×100%=0.00062%\left(\frac{\delta Q}{Q}\right) \times 100\% = \left(\frac{0.67}{108000}\right) \times 100\% = 0.00062\%

    Correct

    δQQ×100%≈4.34%\frac{\delta Q}{Q} \times 100\% \approx 4.34\%, and δQ=Q⋅0.04342≈4700 J\delta Q = Q \cdot 0.04342 \approx 4700\text{ J}

    You correctly set up the ratio δQQ×100%\frac{\delta Q}{Q} \times 100\%, but your numerical result was affected by the incorrect value of δQ\delta Q from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the nominal value of QQ using the formula Q=I2RtQ = I^2 R t.

You recognized that the exponent of 22 on current requires a multiplying factor of 22 when propagating uncertainty.

You correctly set up the formula for percentage uncertainty from absolute uncertainty and the nominal value.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Absolute vs. Relative Uncertainty in Products

No, this is a conceptual misunderstanding of uncertainty propagation rules for products versus sums.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You applied the rule for linear sums (root-sum-square of absolute uncertainties) to a multiplicative power relationship (Q=I2RtQ = I^2 R t). In products and quotients of independent variables, fractional uncertainties δxx\frac{\delta x}{x} combine in quadrature weighted by their power exponents, yielding the fractional uncertainty δQQ\frac{\delta Q}{Q}, from which the absolute uncertainty δQ\delta Q is obtained by multiplying by QQ.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sums vs. Products Rule
  • For y=a+by = a + b, combine absolute uncertainties: δy=(δa)2+(δb)2\delta y = \sqrt{(\delta a)^2 + (\delta b)^2}. For y=anbmy = a^n b^m, combine relative uncertainties: δyy=(nδaa)2+(mδbb)2\frac{\delta y}{y} = \sqrt{\left(n\frac{\delta a}{a}\right)^2 + \left(m\frac{\delta b}{b}\right)^2}.

  • Always check the mathematical operation connecting your variables before writing down the quadrature formula.

Dimensional Consistency Check
  • Every term added under a radical must have the same physical units.

  • Notice that δI\delta I, δR\delta R, and δt\delta t have units of A\text{A}, Ω\Omega, and s\text{s}; adding their squares directly violates dimensional homogeneity, whereas fractional uncertainties δxx\frac{\delta x}{x} are dimensionless.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the fractional uncertainties: δII=0.105.00=0.020\frac{\delta I}{I} = \frac{0.10}{5.00} = 0.020, δRR=0.424.0≈0.0167\frac{\delta R}{R} = \frac{0.4}{24.0} \approx 0.0167, and δtt=0.5180.0≈0.00278\frac{\delta t}{t} = \frac{0.5}{180.0} \approx 0.00278.

  2. Combine fractional uncertainties in quadrature: δQQ=(2×0.020)2+(0.0167)2+(0.00278)2=0.001600+0.000278+0.000008≈0.0434\frac{\delta Q}{Q} = \sqrt{(2 \times 0.020)^2 + (0.0167)^2 + (0.00278)^2} = \sqrt{0.001600 + 0.000278 + 0.000008} \approx 0.0434.

  3. Multiply by 100%100\% to get the relative percentage uncertainty: 4.34%4.34\%.

  4. Multiply the fractional uncertainty by QQ to get absolute uncertainty: δQ=108,000 J×0.04342≈4700 J=4.7 kJ\delta Q = 108{,}000\text{ J} \times 0.04342 \approx 4700\text{ J} = 4.7\text{ kJ}.

Final answer

Q=(1.080±0.047)×105 JQ = (1.080 \pm 0.047) \times 10^5\text{ J}, with δQ=4700 J\delta Q = 4700\text{ J} and relative uncertainty 4.34%4.34\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the two distinct uncertainty propagation formulas: addition/subtraction uses absolute uncertainties, while multiplication/division/powers uses fractional uncertainties.

  • Practice converting absolute uncertainties to dimensionless fractional uncertainties before squaring.

  • Use a quick dimensional analysis check to confirm that all terms inside a square root have identical units.

Lock it in

Similar question

01

Kinetic energy is given by K=12mv2K = \frac{1}{2} m v^2. A mass mm has a relative uncertainty of 2.0%2.0\% and velocity vv has a relative uncertainty of 3.0%3.0\%. If uncertainties are uncorrelated, find the relative percentage uncertainty in KK.

Answer

δKK=(δmm)2+(2δvv)2=(0.020)2+(2×0.030)2=0.0004+0.0036=0.0040≈0.0632=6.3%\frac{\delta K}{K} = \sqrt{\left(\frac{\delta m}{m}\right)^2 + \left(2\frac{\delta v}{v}\right)^2} = \sqrt{(0.020)^2 + (2 \times 0.030)^2} = \sqrt{0.0004 + 0.0036} = \sqrt{0.0040} \approx 0.0632 = 6.3\%.

02

The volume of a sphere is V=43πr3V = \frac{4}{3}\pi r^3. The measured radius is r=(10.0±0.2) cmr = (10.0 \pm 0.2)\text{ cm}. Calculate the nominal volume VV, the fractional uncertainty δVV\frac{\delta V}{V}, and the absolute uncertainty δV\delta V.

Answer
  1. Nominal volume: V=43π(10.0)3≈4189 cm3V = \frac{4}{3}\pi (10.0)^3 \approx 4189\text{ cm}^3.
  2. Relative uncertainty: δrr=0.210.0=0.020  ⟹  δVV=3×0.020=0.060\frac{\delta r}{r} = \frac{0.2}{10.0} = 0.020 \implies \frac{\delta V}{V} = 3 \times 0.020 = 0.060 (6.0%6.0\%).
  3. Absolute uncertainty: δV=4189×0.060≈251 cm3\delta V = 4189 \times 0.060 \approx 251\text{ cm}^3 (or 2.5×102 cm32.5 \times 10^2\text{ cm}^3). Reported as V=(4.19±0.25)×103 cm3V = (4.19 \pm 0.25) \times 10^3\text{ cm}^3.
03

The acceleration due to gravity measured by a simple pendulum is g=4π2LT2g = 4\pi^2 \frac{L}{T^2}. The length is L=(1.000±0.005) mL = (1.000 \pm 0.005)\text{ m} and the period is T=(2.00±0.04) sT = (2.00 \pm 0.04)\text{ s}. Determine the percentage uncertainty in gg and state which measurement contributes most to the final uncertainty.

Answer

δLL=0.0051.000=0.5%\frac{\delta L}{L} = \frac{0.005}{1.000} = 0.5\%, δTT=0.042.00=2.0%\frac{\delta T}{T} = \frac{0.04}{2.00} = 2.0\%. δgg=(0.005)2+(2×0.020)2=0.000025+0.001600=0.001625≈0.0403=4.0%\frac{\delta g}{g} = \sqrt{(0.005)^2 + (2 \times 0.020)^2} = \sqrt{0.000025 + 0.001600} = \sqrt{0.001625} \approx 0.0403 = 4.0\%. The period TT contributes (2×2.0%)2=0.0016(2 \times 2.0\%)^2 = 0.0016, dominating the error budget because it is squared in the formula.

Loading workspace…